RESUMO
Metal oxides are promising materials for supercapacitors due to their high theoretical capacitance. However, their poor electrical conductivity is a major challenge. Hybridization with conductive nanostructured carbon-based materials such as carbon nanotubes (CNTs) has been proposed to improve the conductivity and increase the surface area. In this work, CNTs are used as a template for synthesizing porous thin films of SnO2-CuO-Cu2O (SnO2-Cu x O) via an electroless deposition technique. Tin, with its high wettability and electrical conductivity, acts as an intermediate layer between copper and the CNTs and provides a strong interaction between them. We also observed that by controlling the interfacial characteristics of CNTs and varying the composition of the electroless bath, the SnO2-Cu x O thin film morphology can be easily manipulated. Electrochemical characterizations show that CNT/SnO2-Cu x O nanocomposite possesses pseudocapacitive behavior that reaches a specific capacitance of 662 F g-1 and the retention is 94% after 5000 cycles, which outperforms any known copper and tin-based supercapacitors in the literature. This excellent performance is mainly attributed to high specific surface area, small particle size, the synergistic effect of Sn, and conductivity improvement by using CNTs. The combination of CNTs and metal oxides holds promise for supercapacitors with improved performance.
RESUMO
Axially doped p-i-n InAs0.93Sb0.07 nanowire arrays have been grown on Si substrates and fabricated into photodetectors for shortwave infrared detection. The devices exhibit a leakage current density around 2 mA/cm(2) and a 20% cutoff of 2.3 µm at 300 K. This record low leakage current density for InAsSb based devices demonstrates the suitability of nanowires for the integration of III-V semiconductors with silicon technology.
Assuntos
Nanofios/química , Semicondutores , Silício/química , Índio/química , Microscopia Eletrônica de Varredura , Nanofios/ultraestrutura , Zinco/químicaRESUMO
A plethora of paraneoplastic syndromes have been reported as remote effects of colorectal carcinoma (CRC). However, there is a dearth of data pertaining to the association of this cancer with demyelinating neuropathies. Herein, we describe the case of a young woman diagnosed with chronic inflammatory demyelinating polyneuropathy (CIDP). Treatment with intravenous immunoglobulins and prednisone did not improve her condition, and her neurological symptoms worsened. Subsequently, she was readmitted with exertional dyspnea, lightheadedness, malaise, and black stools. Colonoscopy revealed a necrotic mass in the ascending colon, which directly invaded the second part of the duodenum. Pathologic results confirmed the diagnosis of locally advanced CRC. Upon surgical resection of the cancer, her CIDP showed dramatic resolution without any additional therapy. Patients with CRC may develop CIDP as a type of paraneoplastic syndrome. Clinicians should remain cognizant of this potential association, as it is of paramount importance for the necessary holistic clinical management.
RESUMO
In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 µm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clampedclamped beam nanowire resonators.
RESUMO
This study aimed to examine the impact of information publicity on the intention of tourists to visit rural destinations in developing countries. Based on the theory of planned behavior (TPB), we examined the indirect effect of information publicity on intention to visit via subjective norms and further investigated the moderating effect of social media disposition and social media use. The study used data from a time-lagged design with three waves which supported the hypothesized model. The findings revealed that information publicity has an influence on the intention of tourists to visit through the mediating effect of subjective norms. Moreover, the social media disposition strengthened the relationship between information publicity and subjective norms. Furthermore, social media use positively moderated the relationship between subjective norms and intention to visit. Besides the core TPB constructs, the added variables indeed exerted a substantial impact on the visit intention of tourists. The study contributed to the tourism-related literature on social media and the practical implications were discussed.
RESUMO
There is growing demand for lightweight flexible supercapacitors with high electrochemical performance for wearable and portable electronics. Here, we spun nanoparticles of nickel-manganese oxides along with carbon nanotubes into carbon nanofibers and engineered a 3D networked Ni-Mn oxides/CNT@CNF free-standing membrane for flexible supercapacitor applications. The electrospinning process controlled the nanoparticle aggregation while subsequent heat treatment generates nanochannels in the fibres, resulting in a very porous tubular nanocomposite structure. The preparation process also enabled good interfacial contact between the nanoparticles and the conductive carbon network. The resulting Ni-Mn oxides/CNT@CNF membrane displays high mass loading (Ni-Mn oxides) of 855 mg cm-3 and low CNT incorporation of â¼0.4%. The outstanding porous structure, synergy of the carbon with Ni-Mn oxides, and fast and facile faradaic reactions on the electrode were responsible for the superior volumetric capacitance of 250 F cm-3 at 1 A cm-3, energy density as high as 22 mW h cm-3 and an excellent power density of 12 W cm-3. Despite the low CNT loading, the hybrid electrode exhibits excellent cycling performance with capacitance retention of 96.4% after 10 000 cycles evidencing a well-preserved Ni-manganese oxide nanostructure throughout the cycling. The resulting outstanding electrochemical performances of the Ni-Mn oxides/CNT@CNF synergic system offer new insights into effective utilization of transition metal oxides for establishing high-performance flexible supercapacitors within a confined volume.
RESUMO
PURPOSE: Drug resistance against antimicrobials is on the rise at alarmingly high rates. Acinetobacter baumannii is one of the six ESKAPE pathogens which are a significant "one health" issue. Clinical isolates of A. baumannii exhibit MDR phenotype mostly and infrequently the XDR and PDR phenotype. As a result, these infections have one of the highest mortality rates in hospitals. Alternative therapies are urgently needed. METHODS: Various phages were enriched against XDR clinical strain of A. baumannii. A potent phage, QAB 3.4, was further tested against 100 clinical strains. Because of its broad lytic activity, it was further tested for stability, resistance development and as an infection control agent. RESULTS: Phage QAB 3.4 showed broad lytic activity against 100 MDR and XDR clinical isolates representing a wide diversity of infection sites. Assays conducted to document the phage's stability, and ability of clinical isolates to develop resistance against it, showed promising outcomes for its potential use in clinical applications. Phage QAB 3.4 was able to eradicate A. baumannii from pre-inoculated solid surfaces. It provides a proof of concept that phages can be used as environmentally friendly infection control agents. CONCLUSION: We propose the phage QAB 3.4 is a promising candidate for further pre-clinical and clinical studies to test its biosafety and efficacy.
RESUMO
This Research Article discusses the growth of polycrystalline, self-supporting ZnO nanofibers, which can detect nitrogen dioxide (NO2) gas down to 1 part per billion (ppb), one of the smallest detection limits reported for NO2 using ZnO. A new and innovative method has been developed for growing polycrystalline ZnO nanofibers. These nanofibers have been created using core-shell electrospinning of inorganic metal precursor zinc neodecanoate, where growth occurs at the core of the nanofibers. This process produces contamination-free, self-supporting, polycrystalline ZnO nanofibers of an average diameter and grain size 50 and 8 nm, respectively, which are ideal for gas sensing applications. This process opens up an exciting opportunity for creating nanofibers from a variety of metal oxides, facilitating many new applications especially in the areas of sensors and wearable technologies.
RESUMO
This paper addresses the synthesis and a detailed electrical analysis of individual copper nanowires (CuNWs). One dimensional CuNWs are chemically grown using bromide ions (Br-) as a co-capping agent. By partially replacing alkyl amines with Br-, the isotropic growth on Cu seeds was suppressed during the synthesis. To study the electrical properties of individual CuNWs, a fabrication method is developed which does not require any e-beam lithography process. Chemically grown CuNWs have an ampacity of about 30 million amps per cm2, which is more than one order of magnitude larger than bulk Cu. These good quality, easy to synthesize CuNWs are excellent candidates for creating high ampacity wires and flexible printable electronics.