Small calibre biosynthetic bacterial cellulose blood vessels: 13-months patency in a sheep model.

OBJECTIVES: Many patients in need of bypass surgery lack graft material and current synthetic alternatives have poor performance. A 4 mm vascular graft composed of bacterial cellulose (BC) was developed and tested in pilot study in a large animal model. DESIGN: BC is a biopolymer made by the bacteria acetobacter xylinum. BC grafts (n = 16) with 4 cm length and 4 mm internal diameter were implanted bilaterally in the carotid arteries of eight sheep. No long-term antithrombotic therapy was administered. Patency was assessed with ultrasound. Histology, immunohistochemistry, and electron microscopy were performed after explantation. RESULTS: Fifty percent of the grafts occluded within two weeks. One animal died with patent grafts after 14 days. In the three remaining animals 5/6 grafts were patent after nine months. Two animals were followed 13 months after implantation with 3/4 grafts patent at explantation. All patent grafts had confluent endothelial-like cells. CONCLUSIONS: Biosynthetic small calibre vascular grafts made from BC can be patent for up to 13 months in sheep carotid arteries. BC is a potential material for small calibre grafts but patency in animal models needs to be improved before clinical studies can be planned.

Notice of Retraction: Inappropriate Image Duplication in "Recellularization of Acellular Human Small Intestine Using Bone Marrow Stem Cells".

STEM CELLS TRANSLATIONAL MEDICINE 2013;2:307-315; http://dx.doi.org/10.5966/sctm.2012-0108 The above-referenced article published on March 13, 2013 in Stem Cells Translational Medicine has been retracted by agreement between the Journal Editors and co-publishers, AlphaMed Press and Wiley Periodicals, Inc. The retraction has been agreed to with acknowledgment of problems with Figure 3, which we believe make some of the data unreliable.

Mechanical properties of bacterial cellulose and interactions with smooth muscle cells.

Tissue engineered blood vessels (TEBV) represent an attractive approach for overcoming reconstructive problems associated with vascular diseases by providing small calibre vascular grafts. The aim of this study has been to evaluate a novel biomaterial, bacterial cellulose (BC), as a potential scaffold for TEBV. The morphology of the BC pellicle grown in static culture was investigated with SEM. Mechanical properties of BC were measured in Krebs solution and compared with the properties of porcine carotid arteries and ePTFE grafts. Attachment, proliferation and ingrowth of human smooth muscle cells (SMC) on the BC were analysed in vitro. The BC pellicle had an asymmetric structure composed of a fine network of nanofibrils similar to a collagen network. The shape of the stress-strain response of BC is reminiscent of the stress-strain response of the carotid artery, most probably due to the similarity in architecture of the nanofibrill networks. SMC adhered to and proliferated on the BC pellicle; an ingrowth of up to 40 microm was seen after 2 weeks of culture. BC exhibit attractive properties for use in future TEBV.

In vivo biocompatibility of bacterial cellulose.

The biocompatibility of a scaffold for tissue engineered constructs is essential for the outcome. Bacterial cellulose (BC) consists of completely pure cellulose nanofibrils synthesized by Acetobacter xylinum. BC has high mechanical strength and can be shaped into three-dimensional structures. Cellulose-based materials induce negligible foreign body and inflammatory responses and are considered as biocompatible. The in vivo biocompatibility of BC has never been evaluated systematically. Thus, in the development of tissue engineered constructs with a BC scaffold, it is necessary to evaluate the in vivo biocompatibility. BC was implanted subcutaneously in rats for 1, 4, and 12 weeks. The implants were evaluated in aspects of chronic inflammation, foreign body responses, cell ingrowth, and angiogenesis, using histology, immunohistochemistry, and electron microscopy. There were no macroscopic signs of inflammation around the implants. There were no microscopic signs of inflammation either (i.e., a high number of small cells around the implants or the blood vessels). No fibrotic capsule or giant cells were present. Fibroblasts infiltrated BC, which was well integrated into the host tissue, and did not elicit any chronic inflammatory reactions. The biocompatibility of BC is good and the material has potential to be used as a scaffold in tissue engineering.

Successful tissue engineering of competent allogeneic venous valves.

OBJECTIVE: The purpose of this study was to evaluate whether tissue-engineered human allogeneic vein valves have a normal closure time (competency) and tolerate reflux pressure in vitro. METHODS: Fifteen human allogeneic femoral vein segments containing valves were harvested from cadavers. Valve closure time and resistance to reflux pressure (100 mm Hg) were assessed in an in vitro model to verify competency of the vein valves. The segments were tissue engineered using the technology of decellularization (DC) and recellularization (RC). The decellularized and recellularized vein segments were characterized biochemically, immunohistochemically, and biomechanically. RESULTS: Four of 15 veins with valves were found to be incompetent immediately after harvest. In total, 2 of 4 segments with incompetent valves and 10 of 11 segments with competent valves were further decellularized using detergents and DNAse. DC resulted in significant decrease in host DNA compared with controls. DC scaffolds, however, retained major extracellular matrix proteins and mechanical integrity. RC resulted in successful repopulation of the lumen and valves of the scaffold with endothelial and smooth muscle cells. Valve mechanical parameters were similar to the native tissue even after DC. Eight of 10 veins with competent valves remained competent even after DC and RC, whereas the two incompetent valves remained incompetent even after DC and RC. The valve closure time to reflux pressure of the tissue-engineered veins was <0.5 second. CONCLUSIONS: Tissue-engineered veins with valves provide a valid template for future preclinical studies and eventual clinical applications. This technique may enable replacement of diseased incompetent or damaged deep veins to treat axial reflux and thus reduce ambulatory venous hypertension.

An alternative approach to decellularize whole porcine heart.

Scaffold characteristics are decisive for repopulating the acellular tissue with cells. A method to produce such a scaffold from intact organ requires a customized decellularization protocol. Here, we have decellularized whole, intact porcine hearts by serial perfusion and agitation of hypotonic solution, an ionic detergent (4% sodium deoxycholate), and a nonionic detergent (1% Triton X-100). The resultant matrix was characterized for its degree of decellularization, morphological and functional integrity. The protocol used resulted in extensive decellularization of the cardiac tissue, but the cytoskeletal elements (contractile apparatus) of cardiomyocytes remained largely unaffected by the procedure although their membranous organelles were completely absent. Further, several residual angiogenic growth factors were found to be present in the decellularized tissue.

In Vivo Application of Tissue-Engineered Veins Using Autologous Peripheral Whole Blood: A Proof of Concept Study.

Vascular diseases are increasing health problems affecting > 25 million individuals in westernized societies. Such patients could benefit from transplantation of tissue-engineered vascular grafts using autologous cells. One challenge that has limited this development is the need for cell isolation, and risks associated with ex vivo expanded stem cells. Here we demonstrate a novel approach to generate transplantable vascular grafts using decellularized allogeneic vascular scaffolds, repopulated with peripheral whole blood (PWB) in vitro in a bioreactor. Circulating, VEGFR-2 +/CD45 + and a smaller fraction of VEGFR-2 +/CD14 + cells contributed to repopulation of the graft. SEM micrographs showed flat cells on the luminal surface of the grafts consistent with endothelial cells. For clinical validation, two autologous PWB tissue-engineered vein conduits were prepared and successfully used for by-pass procedures in two pediatric patients. These results provide a proof of principle for the generation of transplantable vascular grafts using a simple autologous blood sample, making it clinically feasible globally.

Recellularization of acellular human small intestine using bone marrow stem cells.

We aimed to produce an acellular human tissue scaffold with a view to test the possibility of recellularization with bone marrow stem cells to produce a tissue-engineered small intestine (TESI). Human small-bowel specimens (n = 5) were obtained from cadaveric organ donors and treated sequentially with 6% dimethyl sulfoxide in hypotonic buffer, 1% Triton X-100, and DNase. Each small intestine (SI) piece (6 cm) was recellularized with EPCAM+ and CD133+ allogeneic bone marrow stem cells. Histological and molecular analysis demonstrated that after decellularization, all cellular components and nuclear material were removed. Our analysis also showed that the decellularized human SI tissue retained its histoarchitecture with intact villi and major structural proteins. Protein films of common extracellular matrix constituents (collagen I, laminin, and fibronectin) were found in abundance. Furthermore, several residual angiogenic factors were found in the decellularized SI. Following recellularization, we found viable mucin-positive goblet cells, CK18+ epithelial cells in villi adjacent to a muscularis mucosa with α-actin+ smooth muscle cells, and a high repopulation of blood vessels with CD31+ endothelial cells. Our results show that in the future, such a TESI would be ideal for clinical purposes, because it can be derived from the recipient's own immunocompatible bone marrow cells, thus avoiding the use of immunosuppression.

Behavior of human chondrocytes in engineered porous bacterial cellulose scaffolds.

Regeneration of articular cartilage damage is an area of great interest due to the limited ability of cartilage to self-repair. The latest cartilage repair strategies are dependent on access to biomaterials to which chondrocytes can attach and in which they can migrate and proliferate, producing their own extracellular matrix. In the present study, engineered porous bacterial cellulose (BC) scaffolds were prepared by fermentation of Acetobacter xylinum (A. xylinum) in the presence of slightly fused wax particles with a diameter of 150-300 microm, which were then removed by extrusion. This porous material was evaluated as a scaffold for cartilage regeneration. Articular chondrocytes from young adult patients as well as neonatal articular chondrocytes were seeded with various seeding techniques onto the porous BC scaffolds. Scanning electron microscopy (SEM) analysis and confocal microscopy analysis showed that cells entered the pores of the scaffolds and that they increasingly filled out the pores over time. Furthermore, DNA analysis implied that the chondrocytes proliferated within the porous BC. Alcian blue van Gieson staining revealed glycosaminoglycan (GAG) production by chondrocytes in areas where cells were clustered together. With some further development, this novel biomaterial can be a suitable candidate for cartilage regeneration applications.

Microporous bacterial cellulose as a potential scaffold for bone regeneration.

Nanoporous cellulose biosynthesized by bacteria is an attractive biomaterial scaffold for tissue engineering due to its biocompatibility and good mechanical properties. However, for bone applications a microscopic pore structure is needed to facilitate osteoblast ingrowth and formation of a mineralized tissue. Therefore, in this study microporous bacterial cellulose (BC) scaffolds were prepared by incorporating 300-500 microm paraffin wax microspheres into the fermentation process. The paraffin wax microspheres were subsequently removed, and scanning electron microscopy confirmed a microporous surface of the scaffolds while Fourier transform infrared spectroscopy verified the elimination of paraffin and tensile measurements showed a Young's modulus of approximately 1.6 MPa. Microporous BC and nanoporous (control) BC scaffolds were seeded with MC3T3-E1 osteoprogenitor cells, and examined by confocal microscopy and histology for cell distribution and mineral deposition. Cells clustered within the pores of microporous BC, and formed denser mineral deposits than cells grown on control BC surfaces. This work shows that microporous BC is a promising biomaterial for bone tissue engineering applications.

Engineering microporosity in bacterial cellulose scaffolds.

The scaffold is an essential component in tissue engineering. A novel method to prepare three-dimensional (3D) nanofibril network scaffolds with controlled microporosity has been developed. By placing paraffin wax and starch particles of various sizes in a growing culture of Acetobacter xylinum, bacterial cellulose scaffolds of different morphologies and interconnectivity were prepared. Paraffin particles were incorporated throughout the scaffold, while starch particles were found only in the outermost area of the resulting scaffold. The porogens were successfully removed after culture with bacteria and no residues were detected with electron spectroscopy for chemical analysis (ESCA) or Fourier transform infra-red spectroscopy (FT-IR). Resulting scaffolds were seeded with smooth muscle cells (SMCs) and investigated using histology and organ bath techniques. SMC were selected as the cell type since the main purpose of the resulting scaffolds is for tissue engineered blood vessels. SMCs attached to and proliferated on and partly into the scaffolds.

Influence of cultivation conditions on mechanical and morphological properties of bacterial cellulose tubes.

Bacterial cellulose (BC) was deposited in tubular form by fermenting Acetobacter xylinum on top of silicone tubes as an oxygenated support and by blowing different concentrations of oxygen, that is, 21% (air), 35%, 50%, and 100%. Mechanical properties such as burst pressure and tensile properties were evaluated for all tubes. The burst pressure of the tubes increased with an increase in oxygen ratio and reached a top value of 880 mmHg at 100% oxygen. The Young's modulus was approximately 5 MPa for all tubes, irrespective of the oxygen ratio. The elongation to break decreased from 30% to 10-20% when the oxygen ratio was increased. The morphology of the tubes was characterized by Scanning Electron Microscopy (SEM). All tubes had an even inner side and a more porous outer side. The cross section indicated that the tubes are composed of layers and that the amount of layers and the yield of cellulose increased with an increase in oxygen ratio. We propose that an internal vessel wall with high density is required for the tube to sustain a certain pressure. An increase in wall thickness by an increase in oxygen ratio might explain the increasing burst pressure with increasing oxygen ratio. The fermentation method used renders it possible to produce branched tubes, tubes with unlimited length and inner diameters. Endothelial cells (ECs) were grown onto the lumen of the tubes. The cells formed a confluent layer after 7 days. The tubes potential as a vascular graft is currently under investigation in a large animal model at the Centre of Vascular Engineering, Sahlgrenska University