RESUMO
The current study presents for the first time the synthesis of a new 2:1-[α/aza]-pseudopeptide series possessing charged amino acids (i.e., lysine) and aims at studying the influences of chirality, backbone length, and the nature of the lysine side chains on the conformation of the 2:1-[α/aza]-oligomers in solution using NMR, FTIR spectroscopy and molecular dynamic calculations. The spectroscopic results emphasized the conservation of the ß-turn conformation adopted by the trimers regardless of the chirality which demonstrated a noticeable effect on the conformation of homochiral hexamer (8c) compared with the hetero-analogue (8d). The molecular dynamic calculations predicted that the chirality and the side chain of the lysine residues caused a little distortion from the classical ß-turn conformation in the case of short trimer sequences (7c and 7d), while the chirality and the backbone length exerted more distortion on the ß-turn adopted by the longer hexamer sequences (8c and 8d). The large disturbance in hexamers from classical ß-turn was attributed to increasing the flexibility and the possibility of molecules to adopt a more energetically favorable conformation stabilized by non-classical ß-turn intramolecular hydrogen bonds. Thus, alternating d- and l-lysine amino acids in the 2:1-[α/aza]-hexamer (8d) decreases the high steric hindrance between the lysine side chains, as in the homo analogue (8c), and the distortion is less recognized. Finally, short sequences of aza-pseudopeptides containing lysine residues improve CO2 separation when used as additives in Pebax® 1074 membranes. The best membrane performances were obtained with a pseudopeptidic dimer as an additive (6b'; deprotected lysine side chain), with an increase in both ideal selectivity α CO2/N2 (from 42.8 to 47.6) and CO2 permeability (from 132 to 148 Barrer) compared to the virgin Pebax® 1074 membrane.
RESUMO
Tissue engineering offers an interesting alternative to current anterior cruciate ligament (ACL) surgeries. Indeed, a tissue-engineered solution could ideally overcome the long-term complications due to actual ACL reconstruction by being gradually replaced by biological tissue. Key requirements concerning the ideal scaffold for ligament tissue engineering are numerous and concern its mechanical properties, biochemical nature, and morphology. This study is aimed at predicting the morphology of a novel scaffold for ligament tissue engineering, based on multilayer braided biodegradable copoly(lactic acid-co-(e-caprolactone)) (PLCL) fibers The process used to create the scaffold is briefly presented, and the degradations of the material before and after the scaffold processing are compared. The process offers varying parameters, such as the number of layers in the scaffold, the pitch length of the braid, and the fibers' diameter. The prediction of the morphology in terms of pore size distribution and pores interconnectivity as a function of these parameters is performed numerically using an original method based on a virtual scaffold. The virtual scaffold geometry and the prediction of pore size distribution are evaluated by comparison with experimental results. The presented process permits creation of a tailorable scaffold for ligament tissue engineering using basic equipment and from minimum amounts of raw material. The virtual scaffold geometry closely mimics the geometry of real scaffolds, and the prediction of the pore size distribution is found to be in good accordance with measurements on real scaffolds. The scaffold offers an interconnected network of pores the sizes of which are adjustable by playing on the process parameters and are able to match the ideal pore size reported for tissue ingrowth. The adjustability of the presented scaffold could permit its application in both classical ACL reconstructions and anatomical double-bundle reconstructions. The precise knowledge of the scaffold morphology using the virtual scaffold will be useful to interpret the activity of cells once it will be seeded into the scaffold. An interesting perspective of the present work is to perform a similar study aiming at predicting the mechanical response of the scaffold according to the same process parameters, by implanting the virtual scaffold into a finite element algorithm.
Assuntos
Lesões do Ligamento Cruzado Anterior , Ligamento Cruzado Anterior/cirurgia , Engenharia Tecidual , Alicerces Teciduais , Ligamento Cruzado Anterior/fisiopatologia , Materiais Biocompatíveis/química , Fenômenos Biomecânicos , Engenharia Biomédica , Simulação por Computador , Humanos , Poliésteres/química , Alicerces Teciduais/química , Interface Usuário-ComputadorRESUMO
In the present study, innovative doxorubicin-loaded nanoparticles (NPs) made of a photosensitive poly(o-nitrobenzyl acrylate) (PNBA) hydrophobic matrix and an hydrophilic dextran (Dex) shell were first formulated by the emulsion-solvent evaporation process. Doxorubicin (DOX), a very well-known anticancer drug, was herein chosen as the model. DOX-loaded NPs were successfully produced by covering the hydrophobic PNBA core with Dex chains either physically adsorbed or covalently linked by changing process parameters as the presence of a catalyst (CuBr or CuSO4/ascorbic acid). It was then proved that the neutralization of DOX optimized drug loading. DOX loading and release were independent of the coverage mechanism if the catalyst used to covalently link the shell to the core was correctly chosen. Second, the kinetics of DOX release were investigated by simple diffusion or light irradiation of the NPs. Experiments showed that less than 20% of DOX was released by simple diffusion after 48 h in PBS or DMEM media when 45% of DOX released after only 30 s of light irradiation of the NPs. Finally, the impact of the phototriggered DOX release on cell viability was investigated on various cell lines [Caco-2, HepG2, HCT-116, and HT-29 cells as well as murine macrophages (RAW 264.7)]. Cellular mortality was evaluated to be dependent on the cell lines tested. Our approach provided an improved DOX release toward the human liver cancer cell line, and a high internalization of the PNBA-based NPs into HepG2 cells was observed using fluorescence microscopy.
Assuntos
Antineoplásicos/farmacologia , Materiais Biocompatíveis/farmacologia , Dextranos/farmacologia , Doxorrubicina/farmacologia , Nitrobenzenos/farmacologia , Fármacos Fotossensibilizantes/farmacologia , Polímeros/farmacologia , Animais , Antineoplásicos/química , Materiais Biocompatíveis/química , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Dextranos/química , Doxorrubicina/química , Portadores de Fármacos/química , Portadores de Fármacos/farmacologia , Ensaios de Seleção de Medicamentos Antitumorais , Humanos , Teste de Materiais , Camundongos , Nanopartículas/química , Nitrobenzenos/química , Tamanho da Partícula , Fármacos Fotossensibilizantes/química , Polímeros/química , Células RAW 264.7RESUMO
Aiming to prepare oily core pH-sensitive nanocapsules (NCs) for anticancer drugs delivery, the use of a dextran-based transurf (DexN3-τCTAγ) as both stabilizer and macromolecular chain transfer agent in methyl methacrylate/2-(diethylamino)ethyl methacrylate (MMA/DEAEMA) miniemulsion copolymerization was investigated. NCs of about 195 nm with an oily-core of Miglyol 810 (M810) and a dextran coverage covalently linked to the poly(MMA-co-DEAEMA) intern shell have been obtained. Compared to the non-sensitive PMMA-based NCs (prepared in a similar way), these novel objects were shown to swell in acidic media and to trigger Coumarin 1 release in physiological relevant pH range. As a starting point of NCs biological effects, cytotoxicity and NCs-proteins interactions studies were performed with both PMMA and poly(MMA-co-DEAEMA)-based NCs. Finally, free azide functions from dextran-based coverage were successfully exploited to attach fluorescent model dyes to NCs surface. The overall results suggest that this novel NCs platform could be potentially used as drug nanocarriers for intravenous injection.
Assuntos
Antineoplásicos/química , Dextranos/química , Metacrilatos/química , Nanocápsulas/química , Triglicerídeos/química , Albuminas/química , Sobrevivência Celular/efeitos dos fármacos , Cumarínicos/química , Composição de Medicamentos , Liberação Controlada de Fármacos , Emulsões/química , Corantes Fluorescentes/química , Humanos , Concentração de Íons de Hidrogênio , Cinética , Transição de Fase , Polimerização , Polimetil Metacrilato/química , Propriedades de Superfície , Células THP-1RESUMO
Easily disrupted: Micelles of a new amphiphilic block copolymer that bear coumarin groups are sensitive to near infrared light by two-photon absorption of the chromophore. Disruption of the micelles under irradiation at 794 nm results in release of both photocleaved coumarin and encapsulated nile red from the hydrophobic core of micelle into aqueous solution, which results in opposing changes in fluorescence emission intensity.
Assuntos
Cumarínicos/química , Nanopartículas/química , Nanopartículas/efeitos da radiação , Fotólise , Polímeros/química , Polímeros/efeitos da radiação , Luz , Micelas , FótonsRESUMO
In this work, photo-sensitive core/shell nanoparticles (NPs) based on biocompatible dextran-g-poly(o-nitrobenzyl acrylate) copolymers (Dex-g-PNBA), containing dextran as hydrophilic backbone and PNBA as photosensitive grafts, were formulated using two processes. In the first process (nanoprecipitation), NPs were prepared using preformed Dex-g-PNBA copolymers. Using the second process (emulsion/organic solvent evaporation), "clicked" or "unclicked" NPs were obtained carrying out (or not) an interfacial in situ click chemistry, respectively. Two model molecules, Nile Red (NR) and Doxorubicin (DOX), were encapsulated and their controlled release from NPs was investigated under UV irradiations to demonstrate the high potential of such photosensitive NPs in biomedicine applications as drug delivery nanocarriers. According to such irradiations, improved release was easily observed. Release kinetics depended on the formulation process and the NPs core chemistry, but not on the occurrence of the interfacial in situ click chemistry. More interesting, a stepped release of such model molecules may easily be obtained.
Assuntos
Acrilatos/química , Preparações de Ação Retardada/farmacologia , Dextranos/química , Doxorrubicina/farmacologia , Nanopartículas/química , Polímeros/química , Antibióticos Antineoplásicos/química , Antibióticos Antineoplásicos/farmacocinética , Antibióticos Antineoplásicos/farmacologia , Células CACO-2 , Sobrevivência Celular/efeitos dos fármacos , Química Click , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Doxorrubicina/química , Doxorrubicina/farmacocinética , Portadores de Fármacos/química , Liberação Controlada de Fármacos/efeitos da radiação , Humanos , Interações Hidrofóbicas e Hidrofílicas , Nanopartículas/efeitos da radiação , Raios UltravioletaRESUMO
A multi-reactive polysaccharide-based transurf (acting both as macro-Chain Transfer Agent and stabilizer) was used to confine RAFT polymerization of methyl methacrylate (MMA) at the oil/water (o/w) miniemulsion interface. Dithiobenzoate groups and hydrophobic aliphatic side chains were introduced onto dextran, conferring it both transfer agent properties and ability to stabilize direct miniemulsion of MMA in the presence of a biocompatible oil, used as co-stabilizer. Because of their amphiphilic character, transurfs were initially adsorbed at the (o/w) interface and their reactive sites mediated RAFT polymerization via the R-group approach. PMMA-grafted dextran glycopolymers were consequently produced at the o/w interface, thus leading to dextran coverage/PMMA shell/oily core nanocapsules (NCs) as evidenced by Cryo-TEM analyses. The influence of dextran-based transurf chemistry and oil amount on MMA RAFT polymerization control was investigated. Positive preliminary results on NCs cytotoxicity suggest the potential of these objects for biomedical applications.
RESUMO
Membranes made from cellulose acetate grafted with imidazolium or ammonium ionic liquids (ILs) containing different anions were considered for ethyl tert-butyl ether biofuel purification by pervaporation. The new cellulosic materials were obtained after bromide (Br-) exchange by different anions (Tf2N-, BF4-, AcO-). IL structure-membrane property relationships revealed that the membrane properties were strongly improved by varying the anion structure, molecular size and hydrogen bonding acceptor ability ß in the Kamlet-Taft polarity scale. The grafted ammonium IL with AcO- anion combined the highest parameter ß with big cation/anion sizes and finally led to the best membrane properties with a normalized pervaporation flux of 0.41â¯kg/h m2 (almost 20 times that of virgin cellulose acetate) for a reference thickness of 5⯵m and a permeate ethanol content of 100%. Such properties thus corresponded to an outstanding separation factor at 50⯰C.
RESUMO
Mesenchymal stem cells (MSCs) have gained increasing interest for tissue engineering and cellular therapy. MSC expansion on microcarriers (MCs) in stirred bioreactors has emerged as an attractive method for their scaled up production. Some MCs have been developed based on polyesters as a hydrophobic biodegradable core. However, most of these MCs are formulated by an emulsion/organic solvent evaporation (E/E) process using poly(vinyl alcohol) as a shell steric stabilizer, which is biocompatible but not degradable in vivo. Moreover, in most of these MCs, the polymer shell is only physically adsorbed at the particle surface. To the best of our knowledge, no study deals with the stability of such a shell when the MCs are in contact with competitive surfactants or with proteins contained in the culture medium. In this study, fully in vivo bioresorbable dextran-covered polylactide-based MCs were formulated using an E/E process, which allowed to control their surface chemistry. Different dextran derivatives with alkyne or ammonium groups were firstly synthesised. Then, on the one hand, some MCs (non-clicked MCs) were formulated with a physically adsorbed polysaccharide shell onto the core. On the other hand, the polysaccharide shell was linked to the core via in situ CuAAC click-chemistry carried out during the E/E process (clicked MCs). The stability of such coverage was first studied in the presence of competitive surfactants (sodium dodecyl sulfate-SDS, or proteins contained in the culture medium) using nanoparticles (NPs) exhibiting the same chemical composition (core/shell) as MCs. The results revealed the total desorption of the dextran shell for non-clicked NPs after treatment with SDS or the culture medium, while this shell desorption was greatly decreased for clicked NPs. A qualitative study of this shell stability was finally carried out on MCs formulated using a new fluorescent dextran-based surfactant. The results were in agreement with those observed for NPs, and showed that non-clicked MCs are characterized by poor shell stability in contact with a competitive surfactant, which could be quite an issue during MSC expansion. In contrast, clicked MCs possess better shell stability, which allow a better control of the MC surface chemistry, especially during cell culture.
RESUMO
HYPOTHESIS: For some years, smart nano-objects are one of the main focuses of current research. In the framework of polymeric nanomedicine, o-nitrobenzyl alcohol derivatives lead to light-responsive polymeric materials. At this day, nanomedicine based on polysaccharide/poly(o-nitrobenzyl acrylate) (PNBA) copolymers have never been reported. EXPERIMENTS: For the first time, PNBA core/dextran shell nanoparticles (NPs) were formulated by evaluating two different processes: (i) nanoprecipitation of preformed Dextran-g-PNBA glycopolymers, (ii) emulsion/evaporation using azido-functionalized PNBA and alkynated dextran, carrying out (or not) an interfacial click chemistry reaction. NPs' characterization, colloidal stability in the presence of salts and of an anionic competitive surfactant (SDS) and light-induced disruption were assessed. Finally, the potential use of these NPs as photo-responsive drug delivery systems was investigated by a preliminary in vitro cytotoxicity study using Caco-2 cells. FINDINGS: Whatever the process, the photosensitive property and the colloidal stability of NPs in the presence of salts were proved. However, triazole rings between the dextran shell and the PNBA core avoid the dextran shell desorption in the presence of SDS. NPs' biocompatibility towards Caco-2 was proved and 100% cell viability was still observed after exposure to NPs following by 60â¯s UV-irradiation.
Assuntos
Dextranos/farmacologia , Sistemas de Liberação de Medicamentos , Luz , Nanopartículas/química , Polissacarídeos/química , Células CACO-2 , Sobrevivência Celular/efeitos dos fármacos , Dextranos/química , HumanosRESUMO
The encapsulation of molecules into nanocarriers is studied for its potential in delivering a high dose of anticancer drugs to a tumor, while minimizing side effects. Most systems either release their content in a non-specific manner or under specific environmental conditions such as temperature or pH. We have synthesized a novel class of photo-controllable polymer micelles that can stably encapsulate a hydrophilic compound and subsequently release it upon absorption of UV light. Here, we describe an in vitro magnetic resonance imaging assay that can evaluate the state of incorporation of a small Gd-based contrast agent. Our results indicate that the contrast agent alone can diffuse through a filter, but that the same agent incorporated into micelles cannot. After exposure to UV light, the micelles released the contrast agent, which could then diffuse through the filter.
Assuntos
Resinas Acrílicas/química , Meios de Contraste/química , Polietilenoglicóis/química , Raios Ultravioleta , Meios de Contraste/administração & dosagem , Portadores de Fármacos , Imageamento por Ressonância Magnética , Metaloporfirinas/química , Micelas , Nanoestruturas , FototerapiaRESUMO
Biobutanol is an attractive renewable biofuel mainly obtained by the acetone-butanol-ethanol (ABE) fermentation process. Nevertheless, the alcohol concentration has to be limited to a maximum of 2 wt % in ABE fermentation broths to avoid butanol toxicity to the microorganisms. The pervaporation (PV) membrane process is a key sustainable technology for butanol recovery in these challenging conditions. In this work, the grafting of azido-polydimethylsiloxane (PDMS-N3) onto a PDMS-based multiblock copolymer containing alkyne side groups led to a series of original membrane materials with increasing PDMS contents from 50 to 71 wt %. Their membrane properties were assessed for butanol recovery by pervaporation from a model aqueous solution containing 2 wt % of n-butanol at 50 °C. The membrane flux J50µm for a reference thickness of 50 µm strongly increased from 84 to 192 g/h m(2) with increasing PDMS content for free-standing dense membranes with thicknesses in the range of 38-95 µm. At the same time, the intrinsic butanol permeability increased from 1.47 to 4.68 kg µm/h m(2) kPa and the permeate butanol content was also strongly improved from 38 to 53 wt %, corresponding to high and very high membrane separation factors of 30 and 55, respectively. Therefore, the new grafted copolymer materials strongly overcame the common permeability/selectivity trade-off for butanol recovery by a sustainable membrane process.
RESUMO
A new strategy was developed for grafting ionic liquids (ILs) onto cellulose acetate in order to avoid IL extraction and improve its performance for ethyl tert-butyl ether (ETBE) biofuel purification by the pervaporation membrane process. This work extended the scope of IL-containing membranes to the challenging separation of organic liquid mixtures, in which these ILs were soluble. The ILs contained the same bromide anion and different cations with increasing polar feature. The membrane properties were strongly improved by IL grafting. Their analysis in terms of structure-property relationships revealed the influence of the IL content, chemical structure and chemical physical parameters α, ß, π* in the Kamlet-Taft polarity scale. The ammonium IL led to the best normalized flux of 0.182kg/m(2)h for a reference thickness of 5µm, a permeate ethanol content of 100% and an outstanding infinite separation factor for the azeotropic mixture EtOH/ETBE at 50°C.
Assuntos
Biocombustíveis , Celulose/análogos & derivados , Técnicas de Química Analítica/métodos , Líquidos Iônicos/química , Cátions/química , Celulose/químicaRESUMO
Among all photosensitive monomers reported in the literature, o-nitrobenzyl acrylate (NBA) was selected in this present study. Two strategies were compared to produce azido-terminated poly(o-nitrobenzyl acrylate) (PNBA) using controlled Single Electron Transfer-Living Radical Polymerization (SET-LRP). In a parallel way, dextran (Dex) was modified by the introduction of several alkynyl-terminated hydrophobic chains. Finally, an Huisgen-type Copper (I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) click-chemistry was carried out to produce amphiphilic Dex-g-PNBA glycopolymers with different number and length of PNBA grafts. 2D DOSY (1)H NMR was used to prove the formation of such glycopolymers. Preliminary study on Dex-g-PNBA self-assembly was done by measuring the critical water content (CWC) above which Dex-g-PNBA started to auto-organize themselves to produce nano-objects. Finally, under UV irradiation, PNBA grafts turn into poly(acrylic acid) ones giving light-sensitive properties to such amphiphilic Dex-g-PNBA. Such properties were evaluated and compared with those of PNBA.
Assuntos
Acrilatos/química , Dextranos/química , Fármacos Fotossensibilizantes/síntese química , Tensoativos/síntese química , Química Click , Nitrobenzenos/química , Fármacos Fotossensibilizantes/química , Tensoativos/químicaRESUMO
Water-soluble stimuli-responsive AB2 miktoarm star copolymers were prepared by atom transfer radical polymerisation of styrene followed by chain-end modification, polymerisation of either gamma-benzyl-L-glutamate N-carboxyanhydride or tert-butylacrylate and a final step of hydrolysis.
Assuntos
Polímeros/química , Elétrons , Hidrólise , Estrutura Molecular , Polímeros/síntese química , Solubilidade , Estireno/química , Água/químicaRESUMO
A multi-reactive polysaccharide-based inisurf (acting both as initiator and stabilizer) has been designed for the first time from dextran with the aim of preparing dextran-covered nanoparticles with covalent linkage between core and coverage. This inisurf was used for polymerizing butyl acrylate in miniemulsion by AGET-ATRP. Both hydrophobic phenoxy groups and initiator groups (bromoisobutyryl ester) were introduced within hydrophilic dextran chain, conferring it amphiphilic and macroinitiator characters. Amphiphilic properties of dextran inisurfs have been evidenced as well as their ability to stabilize the direct miniemulsion of n-butyl acrylate. After optimization of polymerization conditions with model studies, assays were successfully realized with dextran-based inisurfs. Because of their amphiphilic character, inisurfs migrated at oil/water interface and initiated polymerization from bromoisobutyryl ester groups. Therefore graft copolymers were produced at oil/water interface, due to the multifunctional character of these inisurfs and constituted the particle inner core with covalent links to the dextran coverage.
Assuntos
Dextranos/química , Emulsões/química , Polimerização , Interações Hidrofóbicas e Hidrofílicas , Cinética , Espectroscopia de Ressonância Magnética , Nanopartículas/química , Propriedades de Superfície , Tensoativos/químicaRESUMO
For the first time, polymersomes were obtained by self-assembly in water of amphiphilic grafted glycopolymers based on dextran polysaccharidic backbone and polymeric liquid crystal grafts (poly(diethylene glycol cholesteryl ether acrylate), PDEGCholA). After measuring the properties of these glycopolymers in term of surfactancy, the influence of their structural parameters on their self-assemblies once dispersed in water was investigated by static and dynamic light scattering and by cryogenic transmission electron microscopy (cryo-TEM). Based on the results, a proper design of Dex-gN-PDEGCholAF leads to hollow vesicular structure formulation known as polymersome.
RESUMO
Dextran-covered PLA nanoparticles have been formulated by two strategies. On one hand, dextran-g-PLA copolymers have been synthesized by click-chemistry between azide-multifunctionalized dextran (DexN3) and alkyne end-functionalized PLA chains (α-alkyne PLA); then nanoprecipitated without any additional surfactants. On the other hand, DexN3 exhibiting surfactant properties have been emulsified with unfunctionalized or α-alkyne PLA, which are dissolved in organic phase with or without CuBr. Depending on the o/w emulsion/evaporation process experimental conditions, dextran-g-PLA copolymers have been produced in situ, by click chemistry at the liquid/liquid interface during the emulsification step. Whatever the process, biodegradable core/shell polymeric nanoparticles have been obtained, then characterized. Colloidal stability of these nanoparticles in the presence of NaCl or SDS has been studied. While the physically adsorbed polysaccharide based shell has been displaced by SDS, the covalently-linked polysaccharide based shell ensures a permanent stability, even in the presence of SDS.
RESUMO
This study aims to investigate the in vitro degradation of a poly(L-lactic-co-glycolic acid)-poly(L-lactic-co-ϵ-caprolactone) (PLGA-PLCL) composite scaffold's mechanical properties under static culture condition and 2 h period per day of traction-torsion cyclic culture conditions of simultaneous 10% uniaxial strain and 90° of torsion cycles at 0.33 Hz. Scaffolds were cultured in static conditions, during 28 days, with or without cell seeded or under dynamic conditions during 14 days in a bioreactor. Scaffolds' biocompatibility and proliferation were investigated with Alamar Blue tests and cell nuclei staining. Scaffolds' mechanical properties were tested during degradation by uniaxial traction test. The PLGA-PLCL composite scaffold showed a good cytocompatibility and a high degree of colonization in static conditions. Mechanical tests showed a competition between two process of degradation which have been associated to hydrolytic and enzymatic degradation for the reinforce yarn in poly(L-lactic-co-glycolic acid) (PLGA). The enzymatic degradation led to a decrease effect on mechanical properties of cell-seeded scaffolds during the 21st days, but the hydrolytic degradation was preponderant at day 28. In conclusion, the structure of this scaffold is adapted to culture in terms of biocompatibility and cell orientation (microfiber) but must be improved by delaying the degradation of it reinforce structure in PLGA.
Assuntos
Materiais Biocompatíveis/química , Ácido Láctico/química , Poliésteres/química , Ácido Poliglicólico/química , Alicerces Teciduais , Animais , Técnicas de Cultura de Células , Proliferação de Células , Ligamentos , Masculino , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Ratos , Ratos Wistar , Células-Tronco/citologia , Resistência à Tração , Engenharia Tecidual/métodosRESUMO
Thermosensitive polymer micelles are generally obtained with block copolymers in which one block exhibits a lower critical solution temperature in aqueous solution. We investigate a different design that is based on the use of one block bearing a thermally labile side group, whose hydrolysis upon heating shifts the hydrophilic-hydrophobic balance toward the destabilization of block copolymer micelles. Atom transfer radical polymerization was utilized to synthesize a series of diblock copolymers composed of hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly(2-tetrahydropyranyl methacrylate) (PTHPMA). We show that micelles of PEO-b-PTHPMA in aqueous solution can be destabilized as a result of the thermosensitive hydrolytic cleavage of tetrahydropyranyl (THP) groups that transforms PTHPMA into hydrophilic poly(methacrylic acid). The three related processes occurring in aqueous solution, namely, hydrolytic cleavage of THP, destabilization of micelles, and release of loaded Nile Red (NR), were investigated simultaneously using 1H NMR, dynamic light scattering, and fluorescence spectroscopy, respectively. At 80 degrees C, the results suggest that the three events proceed with a similar kinetics. Although slower than at elevated temperatures, the disruption of PEO-b-PTHPMA micelles can take place at the body temperature (approximately 37 degrees C), and the release kinetics of NR can be adjusted by changing the relative lengths of the two blocks or the pH of the solution.