RESUMO
PURPOSE: To evaluate, in a minipig model, the soft tissue integration of four different transmucosal materials, as well as the peri-implant bone remodeling. MATERIALS AND METHODS: A total of 40 implants were placed in five minipigs in a single stage surgery, and two of each of the following abutment materials were used in each animal: (1) titanium (Ti; control), (2) polymethylmethacrylate (PMMA), (3) zirconia (Zi), and (4) veneering ceramic (VC). After a healing period of 3 months, the samples were collected and subjected to nondecalcified histology. The soft tissue dimensions (sulcus, junctional epithelium, and connective tissue attachment) were assessed on each abutment and the distance from the implant margin to first bone-to-implant contact (BIC) was measured. RESULTS: The mean biological width-characterized by the sum of junctional epithelium and connective tissue measurements-was 3.8 (0.6) mm and no statistically significant difference was found between the four groups (p = 0.41). However, a long junctional epithelium (3.3-3.8 mm) and a very short connective tissue attachment (0.1-0.2 mm) were observed with all abutments. The measured peri-implant bone remodeling was similar in all four groups (p = 0.88). CONCLUSIONS: Within its limitations, this study showed that all tested materials allowed soft tissue integration, consisting of a long junctional epithelium, extending close to the bone level, and a rather short portion of connective tissue.
Assuntos
Implantes Dentários , Dente , Animais , Dente Suporte , Implantação Dentária Endóssea/métodos , Suínos , Porco Miniatura , TitânioRESUMO
OBJECTIVES: To compare the clinical and radiographic outcomes of two sinus floor elevation techniques: the conventional lateral window technique versus the transalveolar approach using a hydrodynamic ultrasonic device. MATERIALS AND METHODS: The study was designed as a randomized controlled clinical trial, and participants were randomly allocated to the control group (lateral window: LW) or to the test group (hydrodynamic transalveolar approach: HTA). The intraoperative and postoperative data, including procedure duration and patient-reported outcome measures (PROMs), were collected during the surgery and up to 1 year post-surgery. Additionally, qualitative assessment of gained bone volumes and implant survival rates was recorded. RESULTS: Twenty-two patients were included in the study. The mean surgical time was significantly longer in the HTA compared to the LW group (48.1 ± 11.2 min vs. 35.2 ± 9.1 min, P = 0.0011). Perforation of the Schneiderian membrane occurred in 2/11 and 5/11 patients in the LW and the HTA group, respectively (P = 0.36). Postoperatively, higher morbidity and consumption of nonsteroidal anti-inflammatory drugs (NSAIDs) were associated with the LW group. However, self-reported satisfaction with surgical procedures was similar in the two groups. At 1 year, implant survival rates of 80% in the HTA group and 100% in the LW group were recorded (P = 0.12). CONCLUSIONS: Although the new transalveolar approach seems to reduce postoperative morbidity, an increased risk of intraoperative complications compared to the LW approach needs to be considered when choosing a technique. CLINICAL RELEVANCE: Our results provide new insights regarding clinical and radiographic outcomes of HTA and may help further determine indications for its use. TRIAL REGISTRATION: ClinicalTrivals.gov : NCT04499625.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Implantação Dentária Endóssea , Humanos , Hidrodinâmica , Complicações Intraoperatórias , Maxila , Seio Maxilar/cirurgia , Mucosa NasalRESUMO
PURPOSE: The grey-bluish discoloration of gingiva (known as "amalgam tattoo") does not appear only in the presence of amalgam restorations. It may also be seen in cases of teeth restored with cast dowels and porcelain-fused-to-metal (PFM) restorations. The aim of this article was to determine the clinical characteristics of abutment teeth with gingival discoloration. MATERIALS AND METHODS: This research was conducted on 25 patients referred for cast dowel and PFM restorations. These restorations were manufactured from Ni-Cr alloys. Ninety days after cementing the fixed prosthodontic restorations, the abutment teeth (n = 61) were divided into a group with gingival discoloration (GD) (n = 25) and without gingival discoloration (NGD) (n = 36). The control group (CG) comprised the contralateral teeth (n = 61). Plaque index, gingival index, clinical attachment level, and probing depth were assessed before fabrication and also 90 days after cementation of the PFM restorations. RESULTS: The gingival index, clinical attachment level, and probing depths of the abutment teeth that had GD were statistically higher before restoration, in comparison with the abutment teeth in the NGD and control groups. Ninety days after cementation, the abutment teeth with GD had significantly lower gingival indexes and probing depths, compared to the abutment teeth in the NGD group. Both abutment teeth groups (GD and NGD) had significantly higher values of clinical attachment levels when compared to the control group. There were no statistically significant differences in plaque index values between the study groups. CONCLUSIONS: The results of this study indicated that impairment of periodontal status of abutment teeth seemed to be related to the presence of gingival discolorations. Therefore, fabrication of fixed prosthodontic restorations requires careful planning and abutment teeth preparation to minimize the occurrence of gingival discolorations. CLINICAL RELEVANCE: With careful preparation of abutment teeth for cast dowels and crown restorations it may be possible to decrease the frequency of gingival discolorations adjacent to abutment teeth.
Assuntos
Restauração Dentária Permanente/efeitos adversos , Doenças da Gengiva/etiologia , Adulto , Índice de Placa Dentária , Restauração Dentária Permanente/métodos , Feminino , Gengiva/patologia , Doenças da Gengiva/patologia , Humanos , Masculino , Perda da Inserção Periodontal/patologia , Índice Periodontal , Técnica para Retentor Intrarradicular/efeitos adversosRESUMO
Diabetes mellitus (DM) has been associated with increased bone fracture rates, impaired bone regeneration, delayed bone healing, and depressed osteogenesis. However, the plausible pathogenic mechanisms remain incompletely understood. The aim of the present systematic review was to investigate whether oxidative stress (OS) plays a role in altered characteristics of diabetic bone under in vivo conditions. An electronic search of the MEDLINE (via PubMed) and Embase databases was performed. In vivo animal studies involving DM and providing information regarding assessment of OS markers combined with analyses of bone histology/histomorphometry parameters were selected. A descriptive analysis of selected articles was performed. Ten studies were included in the present review. Both bone formation and bone resorption parameters were significantly decreased in the diabetic groups of animals compared to the healthy groups. This finding was consistent regardless of different animal/bone models employed or different evaluation periods. A statistically significant increase in systemic and/or local OS status was also emphasised in the diabetic groups in comparison to the healthy ones. Markers of OS were associated with histological and/or histomorphometric parameters, including decreased trabecular bone and osteoid volumes, suppressed bone formation, defective bone mineralisation, and reduced osteoclastic activity, in diabetic animals. Additionally, insulin and antioxidative treatment proved to be efficient in reversing the deleterious effects of high glucose and associated OS. The present findings support the hypotheses that OS in the diabetic condition contributes at least partially to defective bone features, and that antioxidative supplementation can be a valuable adjunctive strategy in treating diabetic bone disease, accelerating bone healing, and improving osteointegration.
Assuntos
Remodelação Óssea/fisiologia , Complicações do Diabetes/fisiopatologia , Diabetes Mellitus/fisiopatologia , Estresse Oxidativo/fisiologia , AnimaisRESUMO
AIMS: The primary objective of this study was to compare the in vivo performance, namely in terms of quantity of newly formed bone and bone-to-material contact (osteoconductivity), of three hydroxyapatite-based biomaterials (HA) of different origins (natural or synthetic) or manufacturing process in a sinus lift model in rabbits. The secondary objective was to correlate the findings with the physical and topographical characteristics of the biomaterials. MATERIALS AND METHODS: Two bovine HA manufactured with different processes (bovine hydroxyapatites [BHA] and cuttlebone hydroxyapatite [CBHA]) and a synthetic hydroxyapatite (SHA) sintered at high temperature were characterised with scanning electronic microscopy (SEM) and the measurement of specific surface area (BET). The materials were implanted in a sinus lift model in rabbits; histological and histomorphometric evaluation using non-decalcified sections was performed at 1, 5 and 12 weeks after implantation. RESULTS: The studied biomaterials displayed a different surface topography. The two natural HA displayed significantly higher bone quantities (P = 0.0017; BHA vs. SHA, P = 0.0018 and CBHA vs. SHA, P = 0.033) at 5 and 12 weeks compared to the synthetic one (SHA). Moreover, the osteoconductivity (bone-to-material contact) was significantly higher in the BHA group compared to the two other groups (P = 0.014; BHA vs. SHA, P = 0.023 and BHA vs. CBHA, P = 0.033). CONCLUSION: HA-based biomaterials from diverse origins and manufacturing processes displayed different topographical characteristics. This may have influenced different regenerated bone architecture observed; more bone was found with natural HA compared to the synthetic one, and significantly higher bone-to-material contacts were found with BHA.
Assuntos
Materiais Biocompatíveis , Regeneração Óssea , Substitutos Ósseos , Durapatita , Minerais , Animais , Masculino , Coelhos , Propriedades de SuperfícieRESUMO
AIMS: The primary objective was to assess the occurrence rate of Medication-Related OsteoNecrosis of the Jaw (MRONJ) after dental extraction in patients treated with Antiresorptive Drugs (ARD) for OsteoPorosis (OP) or for oncological reasons. The secondary objective was to compare the extraction techniques regarding the occurrence of MRONJ. MATERIALS AND METHODS: A systematic search in PubMed/MEDLINE, EMBASE and LILACS databases was performed. Prospective studies considering human patients treated with ARD and providing information regarding the occurrence of MRONJ after dental extraction were selected. Meta-analysis for incidence of MRONJ at the patient level was performed. The effect of administration route and surgical technique on MRONJ was evaluated. RESULTS: The risk of MRONJ after dental extraction was significantly higher in patients treated with ARD for oncological reasons (3.2%) than in those treated with per os ARD for OP (0.15%) (p < 0.0001). Dental extraction performed with adjusted extraction protocols decreased significantly MRONJ development. Potential risk indicators such as concomitant medications and pre-existing osteomyelitis were identified. CONCLUSION: The risk of MRONJ after dental extraction in patients treated with ARD exists, especially in patients treated for oncologic reasons. This risk tends to decrease with adjusted extraction protocols.
Assuntos
Osteonecrose/induzido quimicamente , Conservadores da Densidade Óssea/efeitos adversos , Feminino , Humanos , Masculino , Osteoporose/induzido quimicamente , Estudos Prospectivos , Extração DentáriaRESUMO
PURPOSE: To assess two types of abutment materials routinely used in daily prac-tice-direct polymethyl methacrylate (PMMA) and a zirconia-on-Ti-base abut-ment-and their effects on peri-implant soft tissues and bone remodeling in a mini-pig model. MATERIALS AND METHODS: A total of 40 implants were placed in five mini-pigs in a single-stage surgery. Four different types of abutment materials (n = 10 per group) were used: (1) titanium (control); (2) zirconia (control); (3) PMMA (test 1); and (4) Ti-base (zirconia bonded to a titanium framework; test 2). After 3 months of healing, the samples were collected and subjected to nondecalcified histology. The soft tissue dimensions (sulcus, junctional epithelium, and connective tissue attach-ment) were assessed on each abutment mesially and distally, and the distance from the implant margin to the first bone-to-implant contact (BIC) was measured. RESULTS: No statistically significant differences were found among the four groups regarding soft tissue dimensions (P = .21), and a long junctional epithelium (mean: 4.1 mm) and a short connective tissue attachment (mean: 0.3 mm) were found in the majority of abutments. In some samples, the junctional epithelium extended all the way to the bone level. The measured peri-implant bone remodeling was similar in all four groups (P = .25). CONCLUSION: The present findings indicate that both di-rect PMMA and zirconia-on-Ti-base abutments seem to allow soft tissue integration similar to that of titanium and zirconia abutments. However, clinical studies are war-ranted to either confirm or refute the observed findings and to further investigate the influence of different materials on mucointegration.
RESUMO
PURPOSE: To assess two types of abutment materials routinely used in daily practice-direct polymethyl methacrylate (PMMA) and a zirconia-on-Ti-base abutment-and their effects on peri-implant soft tissues and bone remodeling in a minipig model. MATERIALS AND METHODS: A total of 40 implants were placed in five minipigs in a single-stage surgery. Four different types of abutment materials (n = 10 per group) were used: (1) titanium (control); (2) zirconia (control); (3) PMMA (test 1); and (4) Ti-base (zirconia bonded to a titanium framework; test 2). After 3 months of healing, the samples were collected and subjected to nondecalcified histology. The soft tissue dimensions (sulcus, junctional epithelium, and connective tissue attachment) were assessed on each abutment mesially and distally, and the distance from the implant margin to the first bone-to-implant contact (BIC) was measured. RESULTS: No statistically significant differences were found among the four groups regarding soft tissue dimensions (P = .21), and a long junctional epithelium (mean: 4.1 mm) and a short connective tissue attachment (mean: 0.3 mm) were found in the majority of abutments. In some samples, the junctional epithelium extended all the way to the bone level. The measured peri-implant bone remodeling was similar in all four groups (P = .25). CONCLUSIONS: The present findings indicate that both direct PMMA and zirconia-on-Ti-base abutments seem to allow soft tissue integration similar to that of titanium and zirconia abutments. However, clinical studies are warranted to either confirm or refute the observed findings and to further investigate the influence of different materials on mucointegration.
Assuntos
Implantes Dentários , Animais , Suínos , Polimetil Metacrilato , Porco Miniatura , Titânio , Zircônio , Dente SuporteRESUMO
OBJECTIVES: To compare short-term outcomes after immediate restoration of a single implant in the esthetic zone with one-abutment one-time technique comparing a conventional (control) vs. a fully digital workflow (test). MATERIALS AND METHODS: Eighteen subjects were randomly assigned to the two groups, and a digital implant planning was performed for all. In the test group, a custom-made zirconia abutment and a CAD-CAM provisional crown were prepared prior to surgery; implants were placed using a s-CAIS guide allowing immediate restoration after surgery. In the control group, the implant was placed free-handed using a conventional surgical guide, and a custom-made zirconia abutment to support a stratified provisional crown was placed 10 days thereafter, based on a conventional impression. Implant accuracy (relative to the planning), the provisional restoration outcomes, as well as PROMs were assessed. RESULTS: The implant positioning showed higher accuracy with the s-CAIS surgical guide compared to free-handed surgery (angular deviation (AD): 2.41 ± 1.27° vs. 6.26 ± 3.98°, p < 0.014; entry point deviation (CGD): 0.65 ± 0.37 mm vs. 1.27 ± 0.83 mm, p < 0.059; apical deviation (GAD): 1.36 ± 0.53 mm vs. 2.42 ± 1.02 mm, p < 0.014). The occlusion and interproximal contacts showed similar results for the two workflows (p = 0.7 and p = 0.69, respectively). The PROMs results were similar in both groups except for impression taking with intra-oral scanning preferred over conventional impressions (p = 0.014). CONCLUSIONS: Both workflows allowed implant placement and immediate/early restoration and displayed similar clinical and esthetic outcomes. The fully digital workflow was associated with a more accurate implant position relative to planning. CLINICAL RELEVANCE: Our results show that both conventional and digital workflow are predictive and provide similar clinical outcomes, with extra precision provided by digitalisation.
Assuntos
Estética Dentária , Especialidades Cirúrgicas , Desenho Assistido por Computador , Oclusão Dentária , Humanos , Fluxo de TrabalhoRESUMO
Immunity to previously encountered viruses can alter response to unrelated pathogens. We reasoned that similar mechanism may also involve SARS-CoV-2 and thereby affect the specificity and the quality of the immune response against the virus. Here, we employed high-throughput next generation phage display method to explore the link between antibody immune response to previously encountered antigens and spike (S) glycoprotein. By profiling the antibody response in COVID-19 naïve individuals with a diverse clinical history (including cardiovascular, neurological, or oncological diseases), we identified 15 highly antigenic epitopes on spike protein that showed cross-reactivity with antigens of seasonal, persistent, latent or chronic infections from common human viruses. We observed varying degrees of cross-reactivity of different viral antigens with S in an epitope-specific manner. The data show that pre-existing SARS-CoV-2 S1 and S2 cross-reactive serum antibody is readily detectable in pre-pandemic cohort. In the severe COVID-19 cases, we found differential antibody response to the 15 defined antigenic and cross-reactive epitopes on spike. We also noted that despite the high mutation rates of Omicron (B.1.1.529) variants of SARS-CoV-2, some of the epitopes overlapped with the described mutations. Finally, we propose that the resolved epitopes on spike if targeted by re-called antibody response from SARS-CoV-2 infections or vaccinations can function in chronically ill COVID-19 naïve/unvaccinated individuals as immunogenic targets to boost antibodies augmenting the chronic conditions. Understanding the relationships between prior antigen exposure at the antibody epitope level and the immune response to subsequent infections with viruses from a different strain is paramount to guiding strategies to exit the COVID-19 pandemic.
Assuntos
COVID-19 , Glicoproteína da Espícula de Coronavírus , Anticorpos Neutralizantes , Anticorpos Antivirais , Formação de Anticorpos , Antígenos Virais , Doença Crônica , Epitopos , Humanos , Pandemias , SARS-CoV-2RESUMO
Dental implants' success comprises their proper stability and adherence to different oral tissues (integration). The implant is exposed to different mechanical stresses from swallowing, mastication and parafunctions for a normal tooth, leading to the simultaneous mechanical movement and deformation of the whole structure. The knowledge of the mechanical properties of the bone and gingival tissues in normal and pathological conditions is very important for the successful conception of dental implants and for clinical practice to access and prevent potential failures and complications originating from incorrect mechanical factors' combinations. The challenge is that many reported biomechanical properties of these tissues are substantially scattered. This study carries out a critical analysis of known data on mechanical properties of bone and oral soft tissues, suggests more convenient computation methods incorporating invariant parameters and non-linearity with tissues anisotropy, and applies a consistent use of these properties for in silico design and the application of dental implants. Results show the advantages of this approach in analysis and visualization of stress and strain components with potential translation to dental implantology.
RESUMO
Chemically-induced diabetic animal models have been employed in many areas of diabetes mellitus (DM) research, but managing post-induction animal survival rates remains one of the main downsides. The aim of the present study was to propose a reliable approach to animal management and monitoring after DM induction in a rabbit model in order to reduce animal mortality rates. DM was induced by injecting alloxan in 12 New Zealand White rabbits. A preventive subcutaneous glucose administration to counteract a potentially lethal hypoglycemic phase following alloxan injection was performed on individual bases. Blood glucose level (BGL) was checked hourly for the first 36 h, then every 2 h until the hyperglycemic state was confirmed. All 12 rabbits survived a 48-hour post-induction phase. The critical hypoglycemic phase's start points and duration differed significantly among the rabbits, lasting from 6.7 to 37 h (19.75 ± 8.44). The rabbits entered the final hyperglycemic phase 18 h at the earliest and 42 h at the latest after induction (26.63 ± 7.07). The average daily BGLs throughout the study period ranged from 268 to 512 mg/dL (413.73 ± 76.69). Eleven rabbits survived until the end of the experiment. The variability of rabbits' responses to alloxan injection emphasizes the importance of monitoring rabbit behavior and thoroughly checking BGLs, followed by a preventive glucose administration based on rabbits' individual needs for up to 36 h after alloxan injection. The proposed approach seems to reduce animal mortality.
RESUMO
BACKGROUND: Recently, there has been a growing interest in mucointegration as the formation of an early and long-standing soft tissue barrier seems essential for both the initial healing and long-term implant survival. AIM: To develop an experimental method to characterize the mucointegration of different transgingival materials (titanium (Ti), polyetheretherketone (PEEK), polymethylmethacrylate (PMMA), zirconia (Zi), polymer infiltrated ceramic network (PICN), cobalt-chrome (Co-Cr), and lithium disilicate (LD)) in a human model. METHODS: The study is designed as a multi-part randomized controlled clinical trial. Ninety bone level Straumann implants will randomly receive an experimental, custom-made abutment to allow for the removal of the abutment together with the surrounding soft tissues using a punch biopsy device at 8 weeks of healing (10 per material). The specimens will be further processed for non-decalcified histology, followed by histomorphometric analysis. The same protocol will be used for additional 90 implants-abutments, but during harvesting, soft tissues will be separated from the abutment and processed for immunohistochemistry in order to study tissue inflammation and vascularization, while the abutments will undergo SEM analysis. Additionally, in vitro analyses, including SEM and profilometry, will be performed in order to characterize surface topography of all experimental materials. CONCLUSION: The limited number of pilot samples presented herein indicate that the use of custom-made abutments in humans is a reproducible method to study peri-implant soft tissue integration. This further intensifies the rationale to compare different abutment materials, used as transgingival components in daily practice, under the same conditions.
RESUMO
OBJECTIVE: Leukocyte- and platelet-rich fibrin (L-PRF) represents a natural, low-cost product which may promote tissue healing by mechanisms not fully elucidated. Diabetes mellitus (DM) disrupts bone healing by inducing inflammation and oxidative stress (OS), mechanisms regulated by microRNAs (miRs). The aim of the present study was to investigate the microRNA-21 (miR-21) involvement in diabetic bone regeneration using L-PRF alone or in combination with a standard grafting material. DESIGN: After the induction of diabetes (alloxan 100 mg/kg), four cranial osteotomies were made in diabetic (n = 12) and non-diabetic (n = 12) rabbits: one was left empty and the remaining three were grafted with L-PRF, bovine hydroxyapatite (Bio-Oss®) and L-PRF + Bio-Oss®. Two and eight weeks postoperatively, the samples were harvested for miR-21 expression (Real-time RT-PCR) and enzyme-linked immunosorbent assay analyses. RESULTS: Diabetic rabbits showed decreased miR-21 and matrix metalloproteinase-9 (MMP-9) protein expression while increased malondialdehyde (MDA) levels two weeks postoperatively; however, there were no significant differences in miR-21 and MMP-9 levels between diabetic and non-diabetic rabbits in samples taken eight weeks postoperatively. Application of L-PRF and L-PRF + Bio-Oss® improved miR-21 and MMP-9 and decreased MDA levels while Bio-Oss® alone enhanced superoxide dismutase (SOD) activity levels in diabetic rabbits. CONCLUSION: L-PRF alone or in combination with bovine hydroxyapatite as bone graft could be beneficial in DM since it seems to improve inflammation-modulatory miR-21 expression and decreases oxidative stress.
Assuntos
Diabetes Mellitus , Estresse Oxidativo , Fibrina Rica em Plaquetas , Animais , Plaquetas , Bovinos , Fibrina , MicroRNAs , CoelhosRESUMO
Introduction: The material used for root-end filling has to be biocompatible with adjacent periapical tissue and to stimulate its regenerative processes. Tricalcium silicate cement (TSC), as a new dental material, shows good sealing properties with dentin, high compression strengths and better marginal adaptation than commonly used root-end filling materials. Although optimal postoperative healing of periapical tissues is mainly influenced by characteristics of end-root material used, it could sometimes be affected by the influence of systemic diseases, such as diabetes mellitus (DM). Case report: We presented apical healing of the upper central incisor, retrofilled with TSC, in a diabetic patient (type 2 DM) with peripheral neuropathy. Standard root-end resection of upper central incisor was accompanied by retropreparation using ultrasonic retrotips to the depth of 3 mm and retrofilling with TSC. Post-operatively, the surgical wound healed uneventfully. However, the patient reported undefined dull pain in the operated area that could possibly be attributed to undiagnosed intraoral diabetic peripheral neuropathy, what was evaluated clinically. Conclusion: Although TSC presents a suitable material for apical root-end filling in the treatment of chronic periradicular lesions a possible presence of systemic diseases, like type 2 DM, has to be considered in the treatment outcome estimation.