RESUMO
High-field magic angle spinning (MAS) dynamic nuclear polarization (DNP) is becoming a common technique for improving the sensitivity of solid-state nuclear magnetic resonance (SSNMR) by the hyperpolarization of nuclear spins. Recently, we have shown that gamma irradiation is capable of creating long-lived free radicals that are amenable to MAS DNP in quartz and a variety of organic solids. Here, we demonstrate that ball milling is able to generate millimolar concentrations of stable radical species in diverse materials such as polystyrene, cellulose, borosilicate glass, and fused quartz. High-field electron paramagnetic resonance (EPR) was used to obtain further insight into the nature of the radicals formed in ball milled quartz and borosilicate glass. We further show that radicals generated in quartz by ball milling can be used for solid-effect DNP. We obtained 29Si DNP enhancements of approximately 114 and 33 at 110 K and room temperature, respectively, from a sample of ball milled quartz.
RESUMO
The COVID-19 pandemic has claimed millions of lives worldwide, sickened many more, and has resulted in severe socioeconomic consequences. As society returns to normal, understanding the spread and persistence of SARS CoV-2 on commonplace surfaces can help to mitigate future outbreaks of coronaviruses and other pathogens. We hypothesize that such an understanding can be aided by studying the binding and interaction of viral proteins with nonbiological surfaces. Here, we propose a methodology for investigating the adhesion of the SARS CoV-2 spike glycoprotein on common inorganic surfaces such as aluminum, copper, iron, silica, and ceria oxides as well as metallic gold. Quantitative adhesion was obtained from the analysis of measured forces at the nanoscale using an atomic force microscope operated under ambient conditions. Without imposing further constraints on the measurement conditions, our preliminary findings suggest that spike glycoproteins interact with similar adhesion forces across the majority of the metal oxides tested with the exception to gold, for which attraction forces â¼10 times stronger than all other materials studied were observed. Ferritin, which was used as a reference protein, was found to exhibit similar adhesion forces as SARS CoV-2 spike protein. This study results show that glycoprotein adhesion forces for similar ambient humidity, tip shape, and contact surface are nonspecific to the properties of metal oxide surfaces, which are expected to be covered by a thin water film. The findings suggest that under ambient conditions, glycoprotein adhesion to metal oxides is primarily controlled by the water capillary forces, and they depend on the surface tension of the liquid water. We discuss further strategies warranted to decipher the intricate nanoscale forces for improved quantification of the adhesion.
Assuntos
COVID-19 , Humanos , Microscopia de Força Atômica , Pandemias , SARS-CoV-2 , Glicoproteína da Espícula de Coronavírus , Propriedades de SuperfícieRESUMO
Misfit layered compounds (MLCs) MX-TX2, where M, T = metal atoms and X = S, Se, or Te, and their nanotubes are of significant interest due to their rich chemistry and unique quasi-1D structure. In particular, LnX-TX2 (Ln = rare-earth atom) constitute a relatively large family of MLCs, from which nanotubes have been synthesized. The properties of MLCs can be tuned by the chemical and structural interplay between LnX and TX2 sublayers and alloying of each of the Ln, T, and X elements. In order to engineer them to gain desirable performance, a detailed understanding of their complex structure is indispensable. MLC nanotubes are a relative newcomer and offer new opportunities. In particular, like WS2 nanotubes before, the confinement of the free carriers in these quasi-1D nanostructures and their chiral nature offer intriguing physical behavior. High-resolution transmission electron microscopy in conjunction with a focused ion beam are engaged to study SmS-TaS2 nanotubes and their cross-sections at the atomic scale. The atomic resolution images distinctly reveal that Ta is in trigonal prismatic coordination with S atoms in a hexagonal structure. Furthermore, the position of the sulfur atoms in both the SmS and the TaS2 sublattices is revealed. X-ray photoelectron spectroscopy, electron energy loss spectroscopy, and X-ray absorption spectroscopy are carried out. These analyses conclude that charge transfer from the Sm to the Ta atoms leads to filling of the Ta 5d z 2 level, which is confirmed by density functional theory (DFT) calculations. Transport measurements show that the nanotubes are semimetallic with resistivities in the range of 10-4 Ω·cm at room temperature, and magnetic susceptibility measurements show a superconducting transition at 4 K.
RESUMO
A new family of heterostructured transition-metal dichalcogenides (TMDCs) with incommensurate ("misfit") spatial arrangements of well-defined layers was prepared from structurally dissimilar single-phase 2H-MoS2 and 1T-HfS2 materials. The experimentally observed heterostructuring is energetically favorable over the formation of homogeneous multi-principle element dichalcogenides observed in related dichalcogenide systems of Mo, W, and Ta. The resulting three-dimensional (3D) heterostructures show semiconducting behavior with an indirect band gap around 1 eV, agreeing with values predicted from density functional theory. Results of this joint experimental and theoretical study open new avenues for generating unexplored metal-dichalcogenide heteroassemblies with incommensurate structures and tunable physical properties.
RESUMO
Three-dimensional heterostructures are usually created either by assembling two-dimensional building blocks into hierarchical architectures or using stepwise chemical processes that sequentially deposit individual monolayers. Both approaches suffer from a number of issues, including lack of suitable precursors, limited reproducibility, and poor scalability of the preparation protocols. Therefore, development of alternative methods that enable preparation of heterostructured materials is desired. We create heterostructures with incommensurate arrangements of well-defined building blocks using a synthetic approach that comprises mechanical disassembly and simultaneous reordering of layered transition-metal dichalcogenides, MX2, and non-layered monochalcogenides, REX, where M = Ta, Nb, RE = Sm, La, and X = S, Se. We show that the discovered solid-state processes are rooted in stochastic mechanochemical transformations directed by electronic interaction between chemically and structurally dissimilar solids toward atomic-scale ordering, and offer an alternative to conventional heterostructuring. Details of composition-structure-properties relationships in the studied materials are also highlighted.
RESUMO
Three metal-organic framework (MOF) compounds, Ln0.5Gd0.5{C6H3(COO)3}; Ln = Eu, Tb, and Dy with a MIL-78 structure, have been synthesized by a solvent-free mechanochemical method from stoichiometric mixtures of benzene 1,3,5-tricarboxylic acid, C6H3(COOH)3, also known as trimesic acid, and the respective lanthanide carbonates, Ln2(CO3)3·xH2O, Ln = Eu, Gd, Tb and Dy. MIL-78 (Ln0.5Gd0.5) shows the characteristic red, green, and yellow luminescence of Eu3+, Tb3+, and Dy3+, respectively. Efficient intramolecular energy transfer from the ligand triplet state to the excited states of Ln3+ ions can be observed. The lifetimes and quantum yields of these compounds are studied and discussed in detail. Among the three compounds, the Tb3+ containing compound shows the longest lifetime and highest quantum yield due to a smaller contribution from non-radiative decay pathways and better matching of the lowest triplet energy level of the benzenetricarboxylate ligand and the resonance level of Tb3+.
RESUMO
Transition metal dichalcogenides combining multiple principal elements in their structures are synthesized via mechanochemical exfoliation and spontaneous reassembly of binary precursors into 3D-heterostructures that are converted into single-phase layered materials by high-temperature reactive fusion. Physical and chemical events enabling these transformations are summarized in the form of a conceivable reaction mechanism.
RESUMO
Cis-(Ph3P)2PtCl2 and cis-(Ph3P)2PtCO3 were prepared mechanochemically from solid reactants in the absence of a solvent; cis-(Ph3P)2PtCl2 was obtained in 98% yield after ball-milling of polycrystalline PtCl2 and Ph3P; the mechanically induced solid-state reaction of cis-(Ph3P)2PtCl2 with an excess of anhydrous K2CO3 produced cis-(Ph3P)2PtCO3 in 70% yield; the formation of transition metal complexes as a result of mechanochemical solvent-free reactions has been confirmed by means of solid-state 31P MAS NMR spectroscopy, X-ray powder diffraction and differential thermal analysis.
RESUMO
Phosphonium salts have been prepared during high-energy ball-milling of triphenylphosphine with solid organic bromides; the reactions occur at ambient conditions without a solvent; in the case of 2-bromo-2-phenylacetophenone the reaction in a solution usually produces a mixture containing both the C-phosphorylated and O-phosphorylated compounds, while the solvent-free mechanically induced transformation results in the thermodynamically favorable C-phosphorylated product; the occurrence of the observed transformations during mechanical processing of solid reactants is confirmed by the solid-state 31P NMR spectroscopy and X-ray powder diffraction.
Assuntos
Compostos Organofosforados/síntese química , Química Farmacêutica/métodos , Resíduos Industriais/prevenção & controle , MecânicaRESUMO
For the first time a metal hydride has been used for the preparation of a metal-organic framework. MIL-78 has been synthesized by the solid-state mechanochemical reaction between yttrium hydride and trimesic acid. The process does not involve solvents and does not generate liquid by-products, thus proving the viability of the solid-state approach to the synthesis of MOFs.
Assuntos
Compostos Organometálicos/síntese química , Ácidos Tricarboxílicos/química , Ítrio/química , Estrutura Molecular , Compostos Organometálicos/químicaRESUMO
Self-assembled monolayer (SAM) structures and properties are dominated by two interactions: those between the substrate and adsorbate and those between the adsorbates themselves. We have fabricated self-assembled monolayers of m-1-carboranethiol (M1) and m-9-carboranethiol (M9) on Au[111]. The two isomers are nearly identical geometrically, but calculated molecular dipole moments show a sizable difference at 1.06 and 4.08 D for M1 and M9 in the gas phase, respectively. These molecules provide an opportunity to investigate the effect of different dipole moments within SAMs without altering the geometry of the assembly. Pure and co-deposited SAMs of these molecules were studied by scanning tunneling microscopy (STM). The molecules are indistinguishable in STM images, and the hexagonally close-packed adlayer structures were found to have ((square root of 19) x (square root of 19))R23.4 degrees unit cells. Both SAMs display rotational domains without the protruding or depressed features in STM images associated with domain boundaries in other SAM systems. Differing orientations of molecular dipole moments influence SAM properties, including the stability of the SAM and the coverage of the carboranethiolate in competitive binding conditions. These properties were investigated by dynamic contact angle goniometry, Kelvin probe force microscopy, and grazing incidence Fourier transform infrared spectroscopy.
RESUMO
The paper discusses some unresolved issues in the solid state chemistry of alkali metal aluminohydrides (alanates) relevant to high-capacity hydrogen storage. Analysis of experimental data available in chemical and materials science literature suggests a one-step mechanism for the thermal decomposition of both pure and Ti-doped aluminohydrides. Most likely, the presence of a titanium hydride phase in the catalyst is responsible for the catalytic effect of Ti-additives. Furthermore, ball-milling promotes chemical and phase transformations of solid alanates by enhancing mass transfer in the material and creating high-pressure spots where pressure-driven chemical reactions can take place.
RESUMO
We describe the nearly quantitative preparation of phosphorus ylides and the Wittig reaction occurring in the solid sate during high-energy mechanochemical processing. Initial insights into the details of the discovered chemical transformations indicate that high-energy mechanical processing supports the interaction of reacting centers by breaking crystallinity of the reactants and by providing mass transfer without a solvent.