Valorization of Spent Vetiver Roots for Biochar Generation.

Vetiver root is widely used to produce essential oils in the aromatherapy industry. After the extraction of oil, the roots are disposed of as waste. The central objective of this research was to explore the conversion of this waste into a resource using a circular economy framework. To generate biochar, vetiver roots were pyrolyzed at different temperatures (300, 500, and 700 °C) and residence times (30, 60, and 120 min). Analysis showed the root biochar generated at 500 °C and held for 60 min had the highest surface area of 308.15 m2/g and a yield of 53.76%, in addition to other favorable characteristics. Comparatively, the surface area and the yield of shoot biochar were significantly lower compared to those of the roots. Repurposing the spent root biomass for environmental and agronomic benefits, our circular economy concept prevents the plant tissue from entering landfills or the waste stream.

Building MOF Nanocomposites with Oxidized Graphitic Carbon Nitride Nanospheres: The Effect of Framework Geometry on the Structural Heterogeneity.

Composite of two MOFs, copper-based Cu-BTC (HKUST-1) and zirconium-based Zr-BDC (UiO-66), with oxidized graphitic carbon nitride nanospheres were synthesized. For comparison, pure MOFs were also obtained. The surface features were analyzed using x-ray diffraction (XRD), sorption of nitrogen, thermal analysis, and scanning electron microscopy (SEM). The incorporation of oxidized g-C3N4 to the Cu-BTC framework caused the formation of a heterogeneous material of a hierarchical pores structure, but a decreased surface area when compared to that of the parent MOF. In the case of UiO-66, functionalized nanospheres were acting as seeds around which the crystals grew. Even though the MOF phases were detected in both materials, the porosity analysis indicated that in the case of Cu-BTC, a collapsed MOF/nonporous and amorphous matter was also present and the MOF phase was more defectous than that in the case of UiO-66. The results suggested different roles of oxidized g-C3N4 during the composite synthesis, depending on the MOF geometry. While spherical units of UiO-66 grew undisturbed around oxidized and spherical g-C3N4, octahedral Cu-BTC units experienced geometrical constraints, leading to more defects, a disturbed growth of the MOF phase, and to the formation of mesopores at the contacts between the spheres and MOF units. The differences in the amounts of CO2 adsorbed between the MOFs and the composites confirm the proposed role of oxidized g-C3N4 in the composite formation.

TiO2/S-Doped Carbons Hybrids: Analysis of Their Interfacial and Surface Features.

Hybrids containing approximately equal amounts of P25 TiO2 and S-doped porous carbons were prepared using a water-based slurry mixing method. The materials were extensively characterized by adsorption of nitrogen, potentiometric titration, thermal analysis in air and in helium, XRD, XPS and SEM. The collected results showed the significant blockage of carbon micropores by TiO2 particles deposited on their outer surface. The formation of a new interface, especially for the S-rich samples, might also contribute to the porosity alteration. Analysis of surface chemistry suggested the presence of Ti-S bonds with an involvement of sulfur from thiophenic species in the carbon phase. The latter, especially when polymer-derived, was mainly deposited on the TiO2 nanoparticles. Formation of Ti-S stabilized sulfur and increased the ignition temperature of the hybrids, especially those with a high content of sulfur, in comparison with the ignition temperature of carbons. The surfaces of hybrid with S-containing carbons was also thermally very stable and of basic chemical nature. The formation of interfacial structures Ti-C was detected by XPS analysis suggesting a partial reduction of the Ti.

Oxidized g-C3 N4 Nanospheres as Catalytically Photoactive Linkers in MOF/g-C3 N4 Composite of Hierarchical Pore Structure.

A unique composite of the copper-based metal-organic framework (Cu-benzene tricarboxylic acid (BTC)) with oxidized graphitic carbon nitride nanospheres is synthesized. For comparison, a hybrid material consisting of g-C3 N4 and Cu-BTC is also obtained. Their surface features are analyzed using Fourier transform infrared spectroscopy, X-ray diffraction, sorption of nitrogen, thermal analysis, scanning electron microscopy, photoluminescence, and diffuse reflectance UV-Vis spectroscopy. The results suggest that the formed nanospheres of oxidized g-C3 N4 act as linkers between the copper sites, playing a crucial role in the composite building process. Their incorporation to the Cu-BTC framework causes the development of new mesoporosity. Remarkable alterations in the optical properties, as a result of the coordination of oxygen containing functional groups of the oxidized graphitic carbon nitride to the copper atoms of the framework, suggest an increase in photoreactivity. On the other hand, for the hybrid material consisting of Cu-BTC and g-C3 N4 , the unaltered pore volume and optical properties support the formation of a physical mixture rather than of a composite. The tests on reactive adsorption and detoxification of G-series organophosphate nerve agent surrogate show the enhanced performance of the composite as catalysts and photocatalyst in visible light.

Mustard Gas Surrogate Interactions with Modified Porous Carbon Fabrics: Effect of Oxidative Treatment.

Removal of chemical warfare agent (CWA) surrogates by highly porous carbon textiles was investigated. The carbon cloth was modified by oxidation in a mixture of concentrated sulfuric and nitric acid. This process did not affect textile structural integrity. The surface properties of the modified textiles were investigated, and their capabilities to remove 2-chloroethyl ethyl sulfide (CEES) and diethylsulfide (EES), two mustard gas surrogates, were evaluated. The oxidized carbon textiles have a highly active surface that has the ability to form radical species. This enhances the degradation of the surrogates, and so the detoxification efficiency. The reaction products detected suggest differences in degradation mechanisms which depend on the type of fabric surface features. Thus, the oxidized surfaces eliminate CEES mainly through dehydrohalogenation, while the nonoxidized surfaces act via hydrolysis. Only the oxidized carbon has a surface active enough to react with the less reactive surrogate EES, by cleavage of the C-S bond. The surface functional groups promote not only the radical formation but also contribute to a strong adsorption of the CWA surrogates, which enhance the decomposition of these toxic species.

Nanoporous Carbons: Looking Beyond Their Perception as Adsorbents, Catalyst Supports and Supercapacitors.

The discovery of carbon nanoforms, and especially graphene, has opened up new directions of science and technology. Many applications are based on the unique properties of graphene, such as its high electrical and thermal conductivity, strength, flexibility, photoactivity and transparency. Inspired by the emerging graphene science, we directed our efforts to the exploration of new applications of nanoporous (microporous) carbons. Their matrix is built of distorted graphene layers, between which pores with sizes ranging from a fraction of a nanometer to hundreds of nanometers exist. This is a very unique feature of nanoporous carbons resulting in their developed surface areas. Moreover, there are vast possibilities to modify the surface chemistry of carbons and thus their surface properties. Even though the traditional applications of porous carbons focus mainly on adsorption and separation, we decided to explore them as photocatalysts, oxygen reduction catalysts and sensors. Related to their visible-light activity, their possible application in solar energy harvesting is also indicated. This Personal Account presents our paths leading to the exploration of these directions, describing the results collected and difficulties encountered, along with the challenges remaining to be addressed.

Role of surface chemistry and morphology in the reactive adsorption of H2S on iron (hydr)oxide/graphite oxide composites.

Composites of magnetite and two-line ferrihydrite with graphite oxide (GO) were synthesized and tested as hydrogen sulfide adsorbents. Exhausted and initial composites were characterized by the adsorption of nitrogen, X-ray diffraction, potentiometric titration, thermal analysis, and FTIR. The addition of GO increased the surface area of the composites due to the formation of new micropores. The extent of the increase depended on the nature of the iron (hydr)oxide and the content of GO. The addition of GO did not considerably change the crystal structure but increased the number of acidic functional groups. While for the magnetite composites an increase in the H2S adsorption capacity after GO addition was found, the opposite effect was recorded for the ferrihydrite composites. That increase in the adsorption capacity was linked to the affinity of the composites to adsorb water in mesopores of specific sizes in which the reaction with basic surface groups takes place. Elemental sulfur and ferric and ferrous sulfates were detected on the surface of the exhausted samples. A redox reactive adsorption mechanism is proposed to govern the retention of hydrogen sulfide on the surface of the composites. The incorporation of GO enhances the chemical retention of H2S due to the incorporation of OH reactive groups and an increase in surface heterogeneity.

Transient chemical and structural changes in graphene oxide during ripening.

Graphene oxide (GO)-the oxidized form of graphene-is actively studied in various fields, such as energy, electronic devices, separation of water, materials engineering, and medical technologies, owing to its fascinating physicochemical properties. One major drawback of GO is its instability, which leads to the difficulties in product management. A physicochemical understanding of the ever-changing nature of GO can remove the barrier for its growing applications. Here, we evidencde the presence of intrinsic, metastable and transient GO states upon ripening. The three GO states are identified using a [Formula: see text] transition peak of ultraviolet-visible absorption spectra and exhibit inherent magnetic and electrical properties. The presence of three states of GO is supported by the compositional changes of oxygen functional groups detected via X-ray photoelectron spectroscopy and structural information from X-ray diffraction analysis and transmission electron microscopy. Although intrinsic GO having a [Formula: see text] transition at 230.5 ± 0.5 nm is stable only for 5 days at 298 K, the intrinsic state can be stabilized by either storing GO dispersions below 255 K or by adding ammonium peroxydisulfate.

Regulating the spatial arrangement of CuO and MgO within activated carbon matrix to maximize their room temperature H2S removal.

Adsorbents with dual-component active phases have attracted much attention owing to their potential application in synergistic H2S removal. The influence of spatial arrangements of two components within a support matrix on their desulfurization performance was investigated through regulating the mutual arrangements of CuO and MgO on an activated carbon surface. Their spatial locations were found to remarkably affect interfacial interactions, local pH, the conductivity of adsorbents, and electronic structure of copper oxide. A close contact of CuO with the carbon surface led to strong interactions of both components, inhibiting the reduction of CuO and decreasing its reactivity with H2S. On the other hand, a proximity of MgO to the carbon surface increased local pH, promoting the oxidation of H2S into elemental S, instead of sulfates. Cu+ in the copper oxide phase increased the desulfurization performance due to its ability to activate oxygen and to accelerate a lattice diffusion. Enhanced surface conductivity due to the interfacial interactions improved the desulfurization efficiency and favored the formation of elemental S through promoting an electron transfer in redox reactions.

Structural and optical characterization of Zn(OH)2 and its composites with graphite oxides.

The optical properties of zinc (hydr)oxide and its porous composites with 2% and 5% graphite oxide (GO), thus forming ZnGO-2 and ZnGO-5, are investigated using reflectance spectroscopy and two-photon fluorescence (TPF) imaging. The bandgap energies for the Zn(OH)(2), ZnGO-2, and ZnGO-5 samples are determined to be in the range between 2.88 and 3.60 eV. The size of light-emitting regions (~from 4.5 to 45 µm) and pore size (~from 20 to 255 µm) are measured using the TPF imaging technique.

Time-resolved photoluminescence of Zn(OH)2 and its composites with graphite oxides.

Time-resolved photoluminescence is used to determine carrier recombination through radiative and nonradiative processes in zinc hydroxide Zn(OH)(2) and its porous composites with graphite oxide (GO). The decay times, measured by a streak camera, are found to be larger for zinc hydroxide (~1215±156 ps) than its composites (~976±81 ps for ZnGO-2 and 742±59 ps for ZnGO-5), but no significant changes in rise times (from 4.0 to 5.0 ps) are recorded. The dominant mechanism for the radiative process is attributed to free carrier recombination, while microporous networks present in these materials are found to be pathways for the nonradiative recombination process via multiphonon emission.

Interactions of NO2 with Zr-based MOF: effects of the size of organic linkers on NO2 adsorption at ambient conditions.

Zirconium-based metal organic framework (Zr-MOF), UiO-66 and UiO-67, were synthesized and used as adsorbents of NO(2) at ambient temperatures in either dry or moist conditions. The samples were characterized before and after exposure to NO(2) by X-ray diffraction, scanning electron microscopy, N(2)-adsorption at 77 K, thermal analysis, and infrared spectroscopy. The results indicate the important effect of a ligand size on the adsorption of NO(2) on Zr-MOF materials. While the large size of the 4,4-benzenebiphenyldicarboxylic acid (BDPC) ligand has a positive impact on the adsorption of NO(2) on UiO-67 in moist conditions, the opposite effect is found in dry conditions. The large pore volume of UiO-67 enhances the adsorption of moisture and formation of nitric and nitrous acids. The small pore sizes of UiO-66 favor the NO(2) removal in dry conditions via dispersive forces. Upon interaction of NO(2) molecules with the Zr-MOF in dry conditions, the bond between the organic linker and metallic oxide center is broken, leading to the formation of nitrate and nitrite species. Moreover, organic ligands also contribute to the NO(2) reactive adsorption via nitration reaction.

Effects of carbon phase deposition in silica gel pores on NO2 reactive adsorption at ambient conditions on carbon/silica composites.

Silica-carbon composite samples containing various carbon contents deposited within a silica gel matrix were synthesized. The composites were evaluated as nitrogen dioxide adsorbents at ambient conditions in either wet (70% RH) or dry air streams. The surface chemistry and textural features of the initial and exposed samples were characterized using nitrogen adsorption, potentiometric titration, thermal analysis, and FT-IR. The deposition of the carbon phase significantly increased the amount of NO2 adsorbed in comparison with that adsorbed on the silica gel. With an increase in the amount of carbon an increase in the performance was found. The positive effect was especially noticed when water was present in the system. An oxidation of the surface and release of NO was observed. The acidification/oxidation of the surface is more pronounced in moist conditions, and it is linked to the formation of nitric acid adsorbed in the pore system. The carbon phase besides providing some level of hydrophobicity also brings phenolic groups to the system, on which immobilization of NO2 takes place via nitrification reactions.

Reactive adsorption of ammonia and ammonia/water on CuBTC metal-organic framework: a ReaxFF molecular dynamics simulation.

We report ReaxFF molecular dynamics simulations for reactive adsorption of NH(3) on dehydrated CuBTC metal-organic framework. If the temperature is moderate (up to 125 °C), the dehydrated CuBTC demonstrates a good hydrostatic stability for water concentrations up to 4.0 molecules per copper site. However, if the temperature increases to 550 K, the dehydrated CuBTC will collapse even at a small water concentration, 1.0 H(2)O molecule per copper site. When NH(3) molecules are adsorbed in the channel and micropores of CuBTC, they prefer to chemisorb to the copper sites rather than forming a dimer with another NH(3) molecule. The formation of equimolar Cu(2)(NH(2))(4) and (NH(4))(3)BTC structures is observed at 348 K, which is in good agreement with previous experimental findings. The dehydrated CuBTC framework is partially collapsed upon NH(3) adsorption, while the Cu-Cu dimer structure remains stable under the investigated conditions. Further calculations reveal that the stability of CuBTC is related to the ammonia concentration. The critical NH(3) concentration after which the dehydrated CuBTC starts to collapse is determined to be 1.0 NH(3) molecule per copper site. Depending on whether NH(3) concentration is below or above the critical value, the dehydrated CuBTC can be stable to a higher temperature, 378 K, or can collapse at a lower temperature, 250 K. H(2)O∕NH(3) mixtures have also been studied, and we find that although water molecules do not demonstrate a strong interaction with the copper sites of CuBTC, the existence of water molecules can substantially prevent ammonia from interacting with CuBTC, and thus reduce the amount of chemisorbed NH(3) molecules on CuBTC and stabilize the CuBTC framework to some extent.

Controllable atomistic graphene oxide model and its application in hydrogen sulfide removal.

The determination of an atomistic graphene oxide (GO) model has been challenging due to the structural dependence on different synthesis methods. In this work we combine temperature-programmed molecular dynamics simulation techniques and the ReaxFF reactive force field to generate realistic atomistic GO structures. By grafting a mixture of epoxy and hydroxyl groups to the basal graphene surface and fine-tuning their initial concentrations, we produce in a controllable manner the GO structures with different functional groups and defects. The models agree with structural experimental data and with other ab initio quantum calculations. Using the generated atomistic models, we perform reactive adsorption calculations for H2S and H2O∕H2S mixtures on GO materials and compare the results with experiment. We find that H2S molecules dissociate on the carbonyl functional groups, and H2O, CO2, and CO molecules are released as reaction products from the GO surface. The calculation reveals that for the H2O∕H2S mixtures, H2O molecules are preferentially adsorbed to the carbonyl sites and block the potential active sites for H2S decomposition. The calculation agrees well with the experiments. The methodology and the procedure applied in this work open a new door to the theoretical studies of GO and can be extended to the research on other amorphous materials.

Converting carbon black into an efficient and multi-site ORR electrocatalyst: the importance of bottom-up construction parameters.

To boost efficient energy transitions, alternatives to expensive and unsustainable noble metal-based electrocatalysts for the oxygen reduction reaction (ORR) are needed. Having this in mind, carbon black - Black Pearls 2000 (BP) was enriched in active nitrogen-containing centers, including single-atom Fe-N sites surrounded by Fe nanoclusters, through a synthesis methodology employing only broadly available precursors. The methodical approach taken to optimize the synthesis conditions highlighted the importance of (1) a proper choice of the Fe precursor; (2) melamine as an N source to limit the formation of magnetite crystals and modulate the charge density nearby the active sites, and glucose to chelate/isolate Fe atoms and thus allow the Fe-N coordination to be established, with a limiting formation of Fe0 clusters; and (3) a careful dosing of the Fe load. The ORR on the optimized electrocatalyst (Fe0.06-N@BP) proceeds mostly through a four-electron pathway, having an onset potential (0.912 V vs. RHE) and limiting current density (4.757 mA cm-2) above those measured on Pt/C (0.882 V and 4.657 mA cm-2, respectively). Moreover, the current density yielded by Fe0.06-N@BP after 24 h at 0.4 V vs. RHE was still above that of Pt/C at t = 0 (4.44 mA cm-2), making it a promising alternative to noble metal-containing electrocatalysts in fuel cells.

Visible-light-enhanced interactions of hydrogen sulfide with composites of zinc (oxy)hydroxide with graphite oxide and graphene.

Composites of zinc(oxy)hydroxide-graphite oxide and of zinc(oxy)hydroxide-graphene were used as adsorbents of hydrogen sulfide under ambient conditions. The initial and exhausted samples were characterized by XRD, FTIR, potentiometric titration, EDX, thermal analysis, and nitrogen adsorption. An increase in the amount of H(2)S adsorbed/oxidized on their surfaces in comparison with that of pure Zn(OH)(2) is linked to the structure of the composite, the relative number of terminal hydroxyls, and the kind of graphene-based phase used. Although terminal groups are activated by a photochemical process, the graphite oxide component owing to the chemical bonds with the zinc(oxy)hydroxide phase and conductive properties helps in electron transfer, leading to more efficient oxygen activation via the formation of superoxide ions. Elemental sulfur, zinc sulfide, sulfite, and sulfate are formed on the surface. The formation of sulfur compounds on the surface of zinc(oxy)hydroxide during the course of the breakthrough experiments and thus Zn(OH)(2)-ZnS heterojunctions can also contribute to the increased surface activity of our materials. The results show the superiority of graphite oxide in the formation of composites owing to its active surface chemistry and the possibility of interface bond formation, leading to an increase in the number of electron-transfer reactions.

Interactions of NO2 with amine-functionalized SBA-15: effects of synthesis route.

SBA-15 mesoporous silica was modified using (3-aminopropyl)trimethoxysilane (APTMS) following co-condensation or grafting methods and then used as a NO(2) adsorbent at room temperature. The samples were characterized before and after exposure to NO(2) by SEM-EDX, N(2) adsorption at 77 K, potentiometric titration, thermal analysis, and FTIR spectroscopy. Even though, regardless of the synthesis route, the addition of propylamine groups leads to a significant enhancement in the amount of NO(2) adsorbed (from 21 to 124 mg(NO(2))/g), a higher retention of NO(2) and NO (released as a result of surface reactions) was measured on the grafted silica than on all of the co-condensed samples. In the case of the latter materials, improvements in both NO(2) adsorption capacity and NO retention were found for the samples treated with NaOH. This behavior is related to the higher reactivity of deprotonated propylamine groups (formed during NaOH treatment) with NO(2), the presence of silanol groups, and the residual amount of sodium present in the samples. The mechanism of NO(2) adsorption on propylamine groups involves the formation of nitramine and/or nitrosamine. Analysis of the spent materials indicates that the porosity of co-condensed materials is not affected to the same extent by adsorption of NO(2) as that of the grafted silica.

ReaxFF molecular dynamics simulation of thermal stability of a Cu3(BTC)2 metal-organic framework.

The thermal stability of a dehydrated Cu(3)(BTC)(2) (copper(II) benzene 1,3,5-tricarboxylate) metal-organic framework was studied by molecular dynamics simulation with a ReaxFF reactive force field. The results show that Cu(3)(BTC)(2) is thermally stable up to 565 K. When the temperature increases between 600 K and 700 K, the framework starts to partially collapse. The RDF analysis shows that the long range correlations between Cu dimers disappear, indicating the loss of the main channels of Cu(3)(BTC)(2). When the temperature is above 800 K, we find the decomposition of the Cu(3)(BTC)(2) framework. CO is the major product, and we also observe the release of CO(2), O(2), 1,3,5-benzenetricarboxylate (C(6)H(3)(CO(2))(3), BTC) and glassy carbon. The Cu dimer is stable up to 1100 K, but we find the formation of new copper oxide clusters at 1100 K. These results are consistent with experimental findings, and provide valuable information for future theoretical investigations of Cu(3)(BTC)(2) and its application in adsorption, separation and catalytic processes.

Carbon Surface-Influenced Heterogeneity of Ni and Co Catalytic Sites as a Factor Affecting the Efficiency of Oxygen Reduction Reaction.

Highly porous carbon black and micro/mesoporous activated carbon were impregnated with cobalt and nickel nitrates, followed by heat treatment at 850 °C in nitrogen. Detailed information about chemistry and porosity was obtained using XPS, XRD, TEM/EDX, and nitrogen adsorption. The samples were used as ORR catalysts. Marked differences in the performance were found depending on the type of carbon. Differences in surface chemistry and porosity affected the chemistry of the deposited metal species that governed the O2 reduction efficiency along with other features of the carbon supports, including electrical conductivity and porosity. While dissociating surface acidic groups promoted the high dispersion of small metal species, carbon reactivity with oxygen and acidity limited the formation of the most catalytically active Co3O4. Formation of Co3O4 on the highly conductive carbon black resulted in an excellent performance with four electrons transferred and a current density higher than that on Pt/C. When Co3O4 was not formed in a sufficient quantity, nickel metal nanoparticles promoted ORR on the Ni/Co-containing samples. The activity was also significantly enhanced by small pores that increased the ORR efficiency by strongly adsorbing oxygen, which led to its bond splitting, followed by the acceptance of four electrons.