Microstructural analysis of Au/TiO2-SBA-15 nanocomposite.

Properties of gold nanoparticles (AuNPs) are very different from bulk gold, in particular, highly dispersed AuNPs exhibit high catalytic activities on metal oxide supports. Catalytic activities of AuNPs are strongly dependent on: (i) size and morphology; (ii) synthesis methods; (iii) nature of the support; (iv) interaction between AuNPs and the support; and (v) oxidation state of AuNPs in the synthesized catalysts. A goal is to maintain the size and to prohibit aggregation of AuNPs, since aggregations deteriorate catalytic activities. Some strong interactions are therefore required between AuNPs and their supports to prevent the movement of AuNPs. SBA-15 is a promising material for the support of AuNPs since it has ordered two-dimensional hexagonal pore channels, uniform pore size ranging from 5 to 30 nm, narrow pore size distribution, thick amorphous walls ranging from 3 to 6 nm, and high surface area. In this study, SBA-15, TiO2-SBA-15 and TiO2-SBA-15-AuNP nanocomposites were synthesized by the sol-gel method and microstructural characterizations were carried out by both X-ray diffraction analysis and electron microscopy.

Interfacial structure and chemistry of GaN on Ge(111).

The interface of GaN grown on Ge(111) by plasma-assisted molecular beam epitaxy is resolved by aberration corrected scanning transmission electron microscopy. A novel interfacial structure with a 5∶4 closely spaced atomic bilayer is observed that explains why the interface is flat, crystalline, and free of GeN(x). Density functional theory based total energy calculations show that the interface bilayer contains Ge and Ga atoms, with no N atoms. The 5∶4 bilayer at the interface has a lower energy than a direct stacking of GaN on Ge(111) and enables the 5∶4 lattice-matching growth of GaN.

Organization of nanoparticles in polymer brushes.

We have demonstrated a facile infiltration process, in which gold nanoparticles are assembled into block copolymer brushes. After solvent annealing, the polymer-covered nanoparticles are either sequestered into the corresponding block copolymer domain or expulsed from the brush, depending on the shell density of the nanoparticles.

High-resolution scanning precession electron diffraction: Alignment and spatial resolution.

Methods are presented for aligning the pivot point of a precessing electron probe in the scanning transmission electron microscope (STEM) and for assessing the spatial resolution in scanning precession electron diffraction (SPED) experiments. The alignment procedure is performed entirely in diffraction mode, minimising probe wander within the bright-field (BF) convergent beam electron diffraction (CBED) disk and is used to obtain high spatial resolution SPED maps. Through analysis of the power spectra of virtual bright-field images extracted from the SPED data, the precession-induced blur was measured as a function of precession angle. At low precession angles, SPED spatial resolution was limited by electronic noise in the scan coils; whereas at high precession angles SPED spatial resolution was limited by tilt-induced two-fold astigmatism caused by the positive spherical aberration of the probe-forming lens.

Functional conductive nanomaterials via polymerisation in nano-channels: PEDOT in a MOF.

Reactions inside the pores of metal-organic frameworks (MOFs) offer potential for controlling polymer structures with regularity to sub-nanometre scales. We report a wet-chemistry route to poly-3,4-ethylenedioxythiophene (PEDOT)-MOF composites. After a two-step removal of the MOF template we obtain unique and stable macroscale structures of this conductive polymer with some nanoscale regularity.

Threading plasmonic nanoparticle strings with light.

Nanomaterials find increasing application in communications, renewable energies, electronics and sensing. Because of its unsurpassed speed and highly tuneable interaction with matter, using light to guide the self-assembly of nanomaterials can open up novel technological frontiers. However, large-scale light-induced assembly remains challenging. Here we demonstrate an efficient route to nano-assembly through plasmon-induced laser threading of gold nanoparticle strings, producing conducting threads 12±2 nm wide. This precision is achieved because the nanoparticles are first chemically assembled into chains with rigidly controlled separations of 0.9 nm primed for re-sculpting. Laser-induced threading occurs on a large scale in water, tracked via a new optical resonance in the near-infrared corresponding to a hybrid chain/rod-like charge transfer plasmon. The nano-thread width depends on the chain mode resonances, the nanoparticle size, the chain length and the peak laser power, enabling nanometre-scale tuning of the optical and conducting properties of such nanomaterials.