Structure-Property Relationship of Amorphous Maltitol as Tableting Excipient.

Maltitol shows interesting properties compared with mannitol or sorbitol, two other polyols, which are widely used as a pharmaceutical excipients for tablet compaction. For this study, the properties of an amorphous polyol, maltitol, were investigated using a tablet press simulator. The aim of this study was to evaluate the behavior of amorphous maltitol compared to SweetPearl® P 200, a pure product, and SweetPearl® P 300 DC, a textured crystalline maltitol excipient for direct compression. The physicochemical and pharmacotechnical properties were compared, revealing a major change in properties after amorphization. The study of the tabletability, mean yield pressure, elastic properties, etc. shows that the compression behavior of amorphous powders has been significantly altered. The results showed specific properties of amorphous maltitol with good tabletability at low compaction pressure. The stability of the amorphous and the evolution of its behavior in compression were then studied, showing a direct link between its recrystallization and the change in its properties. The use of a stabilizing agent, maltotriitol, slowed down the recrystallization, maintaining the specific properties of the amorphous material in compression for a longer period of time.

Structure-Properties Relationship in the Evaluation of Alginic Acid Functionality for Tableting.

The aim of this study is to investigate the relationship between the structural, molecular, and particulate properties of alginic acid and its functional characteristics in direct compression (tabletability, compressibility, elasticity, deformation mechanism, and disintegration ability). Therefore, accurate characterization of two different batches of alginic acid was executed (X-ray powder diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electronic microscopy, 1H nuclear magnetic resonance, size exclusion chromatography - multi angle light scattering, viscosimetry, carboxylic acid titration, powder flowability, true density, laser granulometry). Results showed that molecular weight seems to affect tablet properties and that the alginic acid with the lowest molecular weight provides the hardest tablets with the lowest elastic recovery. Furthermore, these results show the potential interest of exploiting alginic acid as filler excipient in tablet formulation. Finally, disintegration properties of tested materials were found to be close to that of commercial superdisintegrants (Glycolys® and Kollidon Cl®) but not correlated to their swelling force. It can be concluded, for the first time, that the determination of alginic acid molecular weight seems key for applications in direct compression and in particular for obtaining tablets with reproducible strength.

Formulation of Direct Compression Zidovudine Tablets to Correlate the SeDeM Diagram Expert System and the Rotary Press Simulator Styl'ONE Results.

The SeDeM diagram expert system has been applied to study Zidovudine and some excipients. From the obtained diagrams, a pharmaceutical formula has been designed. SeDeM diagram ascertains the critical parameters that are suitable for a direct compression. The formula is compressed using a rotary tablet press simulator which emulates rotary tablet press' compression profiles. From these compressions, we study the formula behavior under different industrial production conditions but saving a huge amount of material. The study is done at different compression forces and compression speeds and taking into account the influence of the pre-compression force. The differences observed between the compression profiles are hereby described. The results indicate that the formulation is able to be compressed adequately with the emulated compression profiles and no differences are observed between the final products. Therefore, we can assure that the SeDeM diagram expert system is accurate and robust. Moreover, its results are comparable with the compression results in a rotary tablet press, which has never been described in the pharmaceutical literature before. From the obtained results, it is possible to select the best rotary press to scale-up this formulation.

Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

Evaluation of disintegrants functionality for orodispersible mini tablets.

OBJECTIVE: This work evaluates the functionalities of different superdisintegrants (SD) for manufacturing orodispersible mini tablets (ODMT) by direct compression. METHODS: Twenty-three formulations varying in SD type, concentration, and lubricant were used to manufacture ODMT. The ODMT were then characterized for the following properties: friability, porosity, tensile strength, in vivo and in vitro disintegration time (DT). RESULTS: The results show that the presence, type, and concentration of SD did not influence friability, porosity, or tablet tensile strength. With regards to in vivo DT, only cross-linked poly (vinyl pyrrolidone) improved DT in all the tested formulations. Results also showed that when using microcrystalline cellulose (MCC) above 20% in the formulation, DT is longer. Cross-linked carboxymethyl cellulose accelerates DT when the MCC content is less than 20%. As for cross-linked carboxymethyl starch and calcium alginate showed no improvement on DT. Results for in vitro DT were all shorter than in vivo results and there was no correlation with the in vivo evaluation. CONCLUSIONS: This study shows that there is a need to develop better in vitro testing that precisely simulates in vivo conditions and that are adapted to ODMT. This standardization of the test methods for ODMTs must be accompanied by an improvement in the comprehension of SD mechanisms.

Impact of physicochemical environment on the super disintegrant functionality of cross-linked carboxymethyl sodium starch: insight on formulation precautions.

The aim of this work is to improve the understanding of the physicochemical mechanisms involved in the functionality of cross-linked carboxymethyl sodium starch (CCSS) as a tablet super disintegrant (SD). The behavior and properties of this SD (medium uptake, disintegration times, particle size, and rheology) was investigated in a wetting medium of different physicochemical properties. In particular, the relative permittivity (dielectric constant) of these media was intentionally modified for evaluating its effect on CCSS properties. Results showed different swelling behaviors of CCSS particles according to the relative permittivity of the tested media and allow to propose two underlying mechanisms that explain CCSS functionality. Both the intra-particular swelling and the inter-particular repulsion are affected by the relative permittivity of the media. Finally, disintegration test performed on tablets specially formulated with mannitol (used commonly as an excipient and known to modify relative permittivity) confirmed that the functionality of CCSS and therefore the disintegration of the tablet can be altered according to the mannitol content.

Fused Deposition Modelling 3D printing and solubility improvement of BCS II and IV active ingredients - A narrative review.

In the field of pharmaceutical research and development, Fused Deposition Modelling (FDM) 3D printing (3DP) has aroused growing interest within the last ten years. The use of thermoplastic polymers, combined with the melting process of the raw materials, offers the possibility of manufacturing amorphous solid dispersions (ASDs). In the pharmaceutical industry, the formulation of an ASD is a widely used strategy to improve the solubility of poorly soluble drugs (classified by the Biopharmaceutical Classification System (BCS) as class II and IV). In this review, an analysis of studies that have developed a FDM printed form containing a BCS class II or IV active substance was performed. The focus has been placed on the evaluation of the solid state of the active molecules (crystalline or amorphous) and on the study of their dissolution profile. Thus, the aim of this work is to highlight the interest of FDM 3DP to induce the amorphisation phenomenon of Class II and IV active substances by forming an ASD, and as result improving their solubility.

Sodium alginate and alginic acid as pharmaceutical excipients for tablet formulation: Structure-function relationship.

Alginic acid and its sodium salt are well-accepted pharmaceutical excipients fulfilling several roles in the development of solid oral dosage forms. Although they have attractive advantages as safety, abundance, relatively low cost and biodegradability, these natural polysaccharides possess a high variability that may limit their use as excipients for tablet formulation. Thus, to obtain robust formulations and high-quality drug products with consistent performance a complete understanding of the structure-property relationship becomes necessary as the structure of alginates affects both, technological and biopharmaceutical properties. This review compiles the compaction studies carried out that relate the structure of alginates to their mechanical and dissolution performances. The different analytical methods used to determine the chemical composition, primary structure and molecular weight distribution, major factors affecting the behavior of alginates in direct compression, are also exposed. Finally, different strategies reported to improve the properties of alginic acid as direct compression excipient are discussed.

Selective Laser Sintering (SLS), a New Chapter in the Production of Solid Oral Forms (SOFs) by 3D Printing.

3D printing is a new emerging technology in the pharmaceutical manufacturing landscape. Its potential advantages for personalized medicine have been widely explored and commented on in the literature over recent years. More recently, the selective laser sintering (SLS) technique has been investigated for oral drug-delivery applications. Thus, this article reviews the work that has been conducted on SLS 3D printing for the preparation of solid oral forms (SOFs) from 2017 to 2020 and discusses the opportunities and challenges for this state-of-the-art technology in precision medicine. Overall, the 14 research articles reviewed report the use of SLS printers equipped with a blue diode laser (445-450 nm). The review highlights that the printability of pharmaceutical materials, although an important aspect for understanding the sintering process has only been properly explored in one article. The modulation of the porosity of printed materials appears to be the most interesting outcome of this technology for pharmaceutical applications. Generally, SLS shows great potential to improve compliance within fragile populations. The inclusion of "Quality by Design" tools in studies could facilitate the deployment of SLS in clinical practice, particularly where Good Manufacturing Practices (GMPs) for 3D-printing processes do not currently exist. Nevertheless, drug stability and powder recycling remain particularly challenging in SLS. These hurdles could be overcome by collaboration between pharmaceutical industries and compounding pharmacies.

Performance Evaluation of a Novel Biosourced Co-Processed Excipient in Direct Compression and Drug Release.

This study exposes the potential usefulness of a new co-processed excipient, composed of alginic acid and microcrystalline cellulose (Cop AA-MCC), for the preparation of immediate drug release tablets by direct compression. Evaluation of the physical and mechanical properties as well as the disintegration behavior of Cop AA-MCC in comparison to commercial co-processed excipients (Cellactose®, Ludipress®, Prosolv® SMCC HD90 and Prosolv® ODT) and to the physical mixture of the native excipients (MCC and AA), was carried out. The obtained results illustrate the good performance of Cop AA-MCC in terms of powder flowability, tablet tensile strength, compressibility, and disintegration time. Although, this new co-processed excipient showed a slightly high lubricant sensitivity, which was explained by its more plastic than fragmentary deformation behavior, it presented a low lubricant requirement due to the remarkably low ejection force observed during compression. Compression speed and dwell time seemed not to affect significantly the tabletability of Cop AA-MCC. The study exposed evenly the performance of Cop AA-MCC compared to Prosolv® ODT, in terms of tabletability and dissolution rate of Melatonin. Cop AA-MCC presented comparable hardness, lower dilution potential, higher lubricant sensitivity, lower ejection force, and faster Melatonin's release time than Prosolv® ODT. In summary, Cop AA-MCC exhibited interesting physical, mechanical, and biopharmaceutical properties, which demonstrate its concurrence to commercially available co-processed excipients. Furthermore, the simplicity of its composition and the scalability of its elaboration makes this multifunctional excipient highly recommended for direct compression.

Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines.

Over the last few years, conventional medicine has been increasingly moving towards precision medicine. Today, the production of oral pharmaceutical forms tailored to patients is not achievable by traditional industrial means. A promising solution to customize oral drug delivery has been found in the utilization of 3D Printing and in particular Fused Deposition Modeling (FDM). Thus, the aim of this systematic literature review is to provide a synthesis on the production of pharmaceutical solid oral forms using FDM technology. In total, 72 relevant articles have been identified via two well-known scientific databases (PubMed and ScienceDirect). Overall, three different FDM methods have been reported: "Impregnation-FDM", "Hot Melt Extrusion coupled with FDM" and "Print-fill", which yielded to the formulation of thermoplastic polymers used as main component, five families of other excipients playing different functional roles and 47 active ingredients. Solutions are underway to overcome the high printing temperatures, which was the initial brake on to use thermosensitive ingredients with this technology. Also, the moisture sensitivity shown by a large number of prints in preliminary storage studies is highlighted. FDM seems to be especially fitted for the treatment of rare diseases, and particular populations requiring tailored doses or release kinetics. For future use of FDM in clinical trials, an implication of health regulatory agencies would be necessary. Hence, further efforts would likely be oriented to the use of a quality approach such as "Quality by Design" which could facilitate its approval by the authorities, and also be an aid to the development of this technology for manufacturers.

Investigating the Potential Plasticizing Effect of Di-Carboxylic Acids for the Manufacturing of Solid Oral Forms with Copovidone and Ibuprofen by Selective Laser Sintering.

In selective laser sintering (SLS), the heating temperature is a critical parameter for printability but can also be deleterious for the stability of active ingredients. This work aims to explore the plasticizing effect of di-carboxylic acids on reducing the optimal heating temperature (OHT) of polymer powder during SLS. First, mixtures of copovidone and di-carboxylic acids (succinic, fumaric, maleic, malic and tartaric acids) as well as formulations with two forms of ibuprofen (acid and sodium salt) were prepared to sinter solid oral forms (SOFs), and their respective OHT was determined. Plasticization was further studied by differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR). Following this, the printed SOFs were characterized (solid state, weight, hardness, disintegration time, drug content and release). It was found that all acids (except tartaric acid) reduced the OHT, with succinic acid being the most efficient. In the case of ibuprofen, only the acid form demonstrated a plasticizing effect. DSC and FTIR corroborated these observations showing a decrease in the glass transition temperature and the presence of interactions, respectively. Furthermore, the properties of the sintered SOFs were not affected by plasticization and the API was not degraded in all formulations. In conclusion, this study is a proof-of-concept that processability in SLS can improve with the use of di-carboxylic acids.

A QbD Approach for Evaluating the Effect of Selective Laser Sintering Parameters on Printability and Properties of Solid Oral Forms.

The aim of this work was to investigate the effect of process parameters on the printability of a formulation containing copovidone and paracetamol, and on the properties of solid oral forms 3D-printed through selective laser sintering. Firstly, the influence of the heating temperature was evaluated individually, and it was revealed that this parameter was critical for printability, as a sufficiently high temperature (100 °C) is necessary to avoid curling. Secondly, the effects of laser power, scan speed, and layer thickness were determined using a Box-Behnken design. The measured responses, printing yield, height, weight, hardness, disintegration time, and percentage of drug release at 10 min showed the following ranges of values: 55.6-100%, 2.92-3.96 mm, 98.2-187.2 mg, 9.2-83.4 N, 9.7-997.7 s, and 25.8-99.9%, respectively. Analysis of variance (ANOVA) proved that the generated quadratic models and the effect of the three-process parameters were significant (p < 0.05). Yield improved at high laser power, low scan speed, and increased layer thickness. Height was proportional to laser power, and inversely proportional to scan speed and layer thickness. Variations in the other responses were related to the porosity of the SOFs, which were dependent on the value of energy density. Low laser power, fast scan speed, and high layer thickness values favored a lower energy density, resulting in low weight and hardness, rapid disintegration, and a high percentage of drug release at 10 min. Finally, an optimization was performed, and an additional experiment validated the model. In conclusion, by applying a Quality by Design approach, this study demonstrates that process parameters are critical for printability, but also offer a way to personalize the properties of the SOFs.

Selective Laser Sintering of Solid Oral Dosage Forms with Copovidone and Paracetamol Using a CO2 Laser.

Material suitability needs to be considered for the 3D printing of solid oral dosage forms (SODFs). This work aims to assess the suitability of a CO2 laser (λ = 10.6 µm) for selective laser sintering of SODFs containing copovidone and paracetamol. First, physicochemical characterization of powders (two grades of copovidone, two grades of paracetamol and their mixtures at various proportions) was conducted: particle size distribution, morphology, infrared absorbance, flowability, and compactness. Then, printing was launched, and printability of the powders was linked to their physicochemical characteristics. The properties of the sintered SODFs were evaluated (solid state, general aspect, porosity, hardness, drug content and release). Hence, it was found that as copovidone absorbs at the laser's wavelength, sintering was feasible without using an absorbance enhancer. Also, flowability, which mainly depends on the particle size, represents the first control line for "sinterability" as a fair flow is at least required. Low compactness of copovidone and mixtures reduces the mechanical properties of the SODFs but also increases porosity, which can modulate drug release. Moreover, the drug did not undergo degradation and demonstrated a plasticizer effect by lowering the heating temperature. In conclusion, this work proves the applicability of CO2 laser SLS printer to produce SODFs.

High-amylose sodium carboxymethyl starch matrices for oral, sustained drug release: development of a spray-drying manufacturing process.

CONTEXT: High-amylose sodium carboxymethyl starch (HASCA) was recently proposed as a material for oral, sustained drug-release tablets prepared by direct compression. It was produced on a pilot scale, but appeared to be unsuitable for tableting and sustained drug release. Pilot-scale dry powder HASCA was dispersed in hot water and then precipitated with ethanol to give a dry powder presenting the required properties, but very high volumes of ethanol were used to recover the product. OBJECTIVE: A process was therefore designed to transform totally amorphous pregelatinized HASCA by spray-drying into a suitable sustained drug-release excipient for matrix tablets while decreasing ethanol quantities. RESULTS AND DISCUSSION: During the first manufacturing step, that is, heating of the initial hydro-alcoholic suspension, powder and water concentrations are key parameters for the acquisition of excellent binding properties. Hence, a variable ratio of amylose Vh, a crystalline polymorph of amylose, to the amorphous form, is observed depending on the key parameter values. As the most crystalline samples give the weakest tablets, binding properties do not appear to be linked to the presence of a Vh form of amylose. On the other hand, a high water concentration results in excessive tablet strength, that is, inverse conditions leading to the appearance of a Vh form of amylose. Finally, variations in hydro-alcoholic composition appear to affect only tableting properties and do not influence the drug-release rate. CONCLUSION: A process designed to transform totally amorphous pregelatinized HASCA by spray-drying is proposed for easier, economical industrial HASCA production.

Development of alginate esters as novel multifunctional excipients for direct compression.

Methyl ester derivatives of alginic acid have been evaluated as potential multifunctional excipients for pharmaceutical direct compression. The use of alginic acid as an excipient in tablet formulation is limited because of certain drawbacks such as low tablet hardness and poor compressibility. The objective of this work is to improve these properties through esterification of alginic acid, chemical modification commonly used for enhancing the functionality of tableting excipients. It has been observed that the degree of methylation (DM) has a profitable impact in the physico-chemical and mechanical properties of the obtained materials. In general, an increase in the degree of methylation yielded tablets with higher tensile strength and better compressibility. Furthermore, modified alginates exhibited extended disintegration times compared to native alginic acid due to the introduced hydrophobicity. Finally, the functional versatility of the modified alginates as disintegrating and filling/binding agents was tested by formulating them with microcrystalline cellulose and lactose.

Development of Coprocessed Chitin-Calcium Carbonate as Multifunctional Tablet Excipient for Direct Compression, Part 2: Tableting Properties.

The use of multifunctional excipients is gaining interest as it simplifies formulations by replacing the need of multiple monofunctional excipients. In previous work, coprocessed chitin-calcium carbonate (CC) showed to have good potential as a multifunctional excipient for fast disintegrating tablets produced by direct compression. It allowed for good tablet strength, enhanced powder flowability, and higher true and bulk densities with fast disintegrating properties. The objective of this work is to gain insight on CC tableting properties under different tablet manufacturing conditions (different lubrication levels, compression speeds, and dwell times) and in formulations with drug models: ibuprofen and paracetamol. Results showed that CC exhibited good tabletability, compressibility, and compactibility profiles. CC does not require the addition of lubricant and can be used at high compression speeds and different dwell times. When included in formulations with ibuprofen and paracetamol at different percentages, CC enhanced tablets strength and promoted fast disintegration and drug dissolution. In conclusion, this study shows that CC can be used as a multifunctional excipient (filler-disintegrant-binder) for fast disintegrating tablets produced by direct compression.

Flexible heteroionic calcium-magnesium alginate beads for controlled drug release.

In the present work heteroionic calcium-magnesium alginate beads have been prepared by ionotropic gelation using different Ca:Mg ratios. This simple and straightforward approach allowed the obtention of CaMg-alginate beads presenting different mechanical performance depending on the Mg:Ca ratio. The dynamic swelling behavior of the beads was investigated. Increase in the quantity of Mg2+ incorporated in the beads increased the rate of swelling at pH 1.2 and pH 7.2. Finally, the release of ibuprofen was investigated. It was found that increasing the Mg2+ present in the beads raised the drug release rate.

Subcoating with Kollidon VA 64 as water barrier in a new combined native dextran/HPMC-cetyl alcohol controlled release tablet.

A novel oral controlled delivery system for propranolol hydrochloride (PPL) was developed and optimized using wet granulation process. We are studying the ability of subcoating with Kollidon VA 64 as a barrier to water penetration in matrix cores combined hydrophilic (native dextran-HPMC)/hydrophobic (cetyl alcohol) prior to film coating with Opradry II-YS-30-18056. The copovidone (i.e., Kollidon VA 64) not only increases the mechanical properties of tablets (less friability) but also reduces the amount of absorbed water from the air in tropical stability condition (25 degrees C and 75% relative humidity). The in vitro dissolution profiles of coated sustained-release matrix tablets of racemic PPL were determined and compared with uncoated tablet cores according to the United States Pharmacopeia (USP) Tolerance Specifications for Propranolol Hydrochloride Extended-Release Capsules. A comparative kinetic study of the present matrix tablets (coated and uncoated cores) and commercial SUMIAL RETARD capsules (reference formulation (R) (Spain) was established). The values for the similarity factor (f2=61.756, f2=72.326 and f2=88.509 for initial time, one year and two years, respectively (uncoated cores vs. capsule) and f2=63.904, f2=69.502 and f2=76.348 (coated tablets vs. capsule) for initial time, one year and 2 two years, respectively) suggested that the dissolution profiles of the present three sustained-release oral dosage forms are similar and stable during two years under stability condition.

A sugar cane native dextran as an innovative functional excipient for the development of pharmaceutical tablets.

We reported the physical chemical characterization of a new series of native dextran (B110-1-2). The chemical structure of the polymer was characterized by IR, (1)H and (13)C NMR spectroscopy and compared with that of a commercial native dextran B512-F obtained from Sigma Company. Molecular weights of the product and different commercial dextran fractions of Leuconostoc mesenteroides from 43000 to 170000 average molecular weight (M(w)) were established by the analysis of intrinsic viscosity in aqueous solutions and compared with those obtained by gel permeation chromatography (GPC). The critical overlap concentration around 9g/L was obtained. No interactions of powder mixtures with different commercial excipients (lactose, cetyl alcohol, HPMC) and drugs (propranolol hydrochloride, acetyl salicyclic acid, isosorbide dinitrate, lobenzarit disodium, and nifedipine) were demonstrated by differential scanning calorimetry (DSC) analysis. Tablets obtained by direct compression showed good physical-mechanical and technological properties. Dextran B110-1-2 has similar physical chemical properties as commercial Sigma B512-F. Water uptake, erosion and dissolution profile studies for dextran tablets established that glucose polymer with molecular weight M(w) > or = 2x10(6) is suitable for the development of controlled release solid dosage forms (soluble drugs). Fraction of dextran (M(w) 40000-170000) could be more useful for immediate release tablets.