Development of a Nanostructured Electrochemical Genosensor for the Detection of the K-ras Gene.

In the scientific literature, it has been documented that electrochemical genosensors are novel analytical tools with proven clinical diagnostic potential for the identification of carcinogenic processes due to genetic and epigenetic alterations, as well as infectious diseases due to viruses or bacteria. In the present work, we describe the construction of an electrochemical genosensor for the identification of the k12p.1 mutation; it was based on use of Screen-Printed Gold Electrode (SPGE), Cyclic Voltammetry (CV), and Atomic Force Microscopy (AFM), for the monitoring the electron transfer trough the functionalized nanostructured surface and corresponding morphological changes. The sensitivity of the genosensor showed a linear response for the identification of the k12p.1 mutation of the K-ras gene in the concentration range of 10 fM to 1 µM with a detection limit of 7.96 fM in the presence of doxorubicin (Dox) as DNA intercalating agent and indicator of the hybridization reaction. Thus, the electrochemical genosensor developed could be useful for the identification of diseases related with the K-ras oncogene.

Non-Genomic Actions of Estrogens on the DNA Repair Pathways Are Associated With Chemotherapy Resistance in Breast Cancer.

Estrogens have been implicated in the etiology of breast cancer for a long time. It has been stated that long-term exposure to estrogens is associated with a higher incidence of breast cancer, since estradiol (E2) stimulates breast cell growth; however, its effect on DNA damage/repair is only starting to be investigated. Recent studies have documented that estrogens are able to modify the DNA damage response (DDR) and DNA repair mechanisms. On the other hand, it has been proposed that DDR machinery can be altered by estrogen signaling pathways, that can be related to cancer progression and chemoresistance. We have demonstrated that E2 promotes c-Src activation and breast cancer cell motility, through a non-genomic pathway. This review discusses scientific evidence supporting this non-genomic mechanism where estrogen modifies the DNA repair pathways, and its relationship to potential causes of chemoresistance.

Enzymatically assisted isolation of high-quality cellulose nanoparticles from water hyacinth stems.

High quality cellulose nanoparticles (CNP) were isolated from water hyacinth stem cellulose (Cel-WH) extracted via successive thermochemical and alkaline-peroxide treatments, and further enzymatically hydrolysed using the commercial cellulase complex, NS22086, at 50ºC. The maximum CNP concentration was reached after 120 min of enzymatic hydrolysis, with a hydrodynamic diameter in the order of 200-250 nm and an increase of 5% in crystallinity as compared with Cel-WH. The obtained rod-shaped cellulose nanocrystals, as revealed by atomic force microscopy (AFM), exhibited a nominal diameter of 15.6-29.4 nm, a length of 56-184.8 nm, and a height of 2.85-6.43 nm, indicating a low tendency to form aggregates. In the present study, it was found that water hyacinth stems are a valuable source for the isolation of high-quality CNP using an environmentally friendly procedure, with potential applications in nanomedicine and nanopharmacology.

Gold nanoparticle uptake is enhanced by estradiol in MCF-7 breast cancer cells.

Purpose: In the present study, we investigated the effects of 17ß-estradiol (E2) on membrane roughness and gold nanoparticle (AuNP) uptake in MCF-7 breast cancer cells. Methods: Estrogen receptor (ER)-positive breast cancer cells (MCF-7) were exposed to bare 20 nm AuNPs in the presence and absence of 1×10-9 M E2 for different time intervals for up to 24 hrs. The effects of AuNP incorporation and E2 incubation on the MCF-7 cell surface roughness were measured using atomic force microscopy (AFM). Endocytic vesicle formation was studied using confocal laser scanning microscopy (CLSM). Finally, the results were confirmed by hyperspectral optical microscopy. Results: High-resolution AFM images of the surfaces of MCF-7 membranes (up to 250 nm2) were obtained. The incubation of cells for 12 hrs with AuNP and E2 increased the cell membrane roughness by 95% and 30% compared with the groups treated with vehicle (ethanol) or AuNPs only, respectively. This effect was blocked by an ER antagonist (7α,17ß-[9-[(4,4,5,5,5-Pentafluoropentyl)sulfinyl]nonyl]estra-1,3,5(10)-triene-3,17-diol [ICI] 182,780). Higher amounts of AuNPs were localized inside MCF-7 cells around the nucleus, even after 6 hrs of E2 incubation, compared with vehicle-treated cells. Endolysosome formation was induced by E2, which may be associated with an increase in AuNP-uptake. Conclusions: E2 enhances AuNP incorporation in MCF-7 cells by modulating of plasma membrane roughness and inducing lysosomal endocytosis. These findings provide new insights into combined nanotherapies and hormone therapies for breast cancer.

Simultaneous recording of electrical activity and the underlying ionic currents in NG108-15 cells cultured on gold substrate.

This paper shows the simultaneous recording of electrical activity and the underlying ionic currents by using a gold substrate to culture NG108-15 cells. Cells grown on two different substrates (plastic Petri dishes and gold substrates) were characterized quantitatively through scanning electron microscopy (SEM) as well as qualitatively by optical and atomic force microscopy (AFM). No significant differences were observed between the surface area of cells cultured on gold substrates and Petri dishes, as indicated by measurements performed on SEM images. We also evaluated the electrophysiological compatibility of the cells through standard patch-clamp experiments by analyzing features such as the resting potential, membrane resistance, ionic currents, etc. Cells grown on both substrates showed no significant differences in their dependency on voltage, as well as in the magnitude of the Na+ and K+ current density; however, cells cultured on the gold substrate showed a lower membrane capacitance when compared to those grown on Petri dishes. By using two separate patch-clamp amplifiers, we were able to record the membrane current with the conventional patch-clamp technique and through the gold substrate simultaneously. Furthermore, the proposed technique allowed us to obtain simultaneous recordings of the electrical activity (such as action potentials firing) and the underlying membrane ionic currents. The excellent conductivity of gold makes it possible to overcome important difficulties found in conventional electrophysiological experiments such as those presented by the resistance of the electrolytic bath solution. We conclude that the technique here presented constitutes a solution to the problem of the simultaneous recording of electrical activity and the underlying ionic currents, which for decades, had been solved only partially.

Development of a Nanostructured Platform for Identifying HER2-Heterogeneity of Breast Cancer Cells by Surface-Enhanced Raman Scattering.

Biosensor technology has great potential for the detection of cancer through tumor-associated molecular biomarkers. In this work, we describe the immobilization of the recombinant humanized anti-HER2 monoclonal antibody (trastuzumab) on a silver nanostructured plate made by pulsed laser deposition (PLD), over a thin film of Au(111). Immobilization was performed via 4-mercapto benzoic acid self-assembled monolayers (4-MBA SAMs) that were activated with coupling reagents. A combination of immunofluorescence images and z-stack analysis by confocal laser scanning microscopy (CLSM) allowed us to detect HER2 presence and distribution in the cell membranes. Four different HER2-expressing breast cancer cell lines (SKBR3 +++, MCF-7 +/-, T47D +/-, MDA-MB-231 -) were incubated during 24 h on functionalized silver nanostructured plates (FSNP) and also on Au(111) thin films. The cells were fixed by means of an ethanol dehydration train, then characterized by atomic force microscopy (AFM) and surface-enhanced Raman scattering (SERS). SERS results showed the same tendency as CLSM findings (SKBR3 > MCF-7 > T47D > MDA-MB-231), especially when the Raman peak associated with phenylalanine amino acid (1002 cm-1) was monitored. Given the high selectivity and high sensitivity of SERS with a functionalized silver nanostructured plate (FSNP), we propose this method for identifying the presence of HER2 and consequently, of breast cancer cells.

The relationship between the surface composition and electrical properties of corrosion films formed on carbon steel in alkaline sour medium: an XPS and EIS study.

This work studies the evolution of 1018 carbon steel surfaces during 3-15 day immersion in alkaline sour medium 0.1 M (NH4)2S and 10 ppm CN(-) as (NaCN). During this period of time, surfaces were jointly characterized by electrochemical techniques in situ (electrochemical impedance spectroscopy, EIS) and spectroscopic techniques ex situ (X-ray photoelectron spectroscopy, XPS). The results obtained by these techniques allowed for a description of electrical and chemical properties of the films of corrosion products formed at the 1018 steel surface. There is an interconversion cycle of chemical species that form films of corrosion products whose conversion reactions favor two different types of diffusions inside the films: a chemical diffusion of iron cations and a typical diffusion of atomic hydrogen. These phenomena jointly control the passivity of the interface attacked by the corrosive medium.

Patterning highly ordered arrays of complex nanofeatures through EUV directed polarity switching of non chemically amplified photoresist.

Given the importance of complex nanofeatures in the filed of micro-/nanoelectronics particularly in the area of high-density magnetic recording, photonic crystals, information storage, micro-lens arrays, tissue engineering and catalysis, the present work demonstrates the development of new methodology for patterning complex nanofeatures using a recently developed non-chemically amplified photoresist (n-CARs) poly(4-(methacryloyloxy)phenyl)dimethylsulfoniumtriflate) (polyMAPDST) with the help of extreme ultraviolet lithography (EUVL) as patterning tool. The photosensitivity of polyMAPDST is mainly due to the presence of radiation sensitive trifluoromethanesulfonate unit (triflate group) which undergoes photodegradation upon exposure with EUV photons, and thus brings in polarity change in the polymer structure. Integration of such radiation sensitive unit into polymer network avoids the need of chemical amplification which is otherwise needed for polarity switching in the case of chemically amplified photoresists (CARs). Indeed, we successfully patterned highly ordered wide-raging dense nanofeatures that include nanodots, nanowaves, nanoboats, star-elbow etc. All these developed nanopatterns have been well characterized by FESEM and AFM techniques. Finally, the potential of polyMAPDST has been established by successful transfer of patterns into silicon substrate through adaptation of compatible etch recipes.

Unequal-sphere packing model for simulation of the uniaxially compressed iodine adlayer on Au(111).

A simple unequal-sphere packing (USP) model, based on pure geometrical principles, was applied to study the centered-rectangular iodine c(px radical3)R30 degrees adlayer on the Au(111) surface, well-known from surface X-ray structure (SXS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM) experiments. To reproduce the exact patterns observed in experiments, two selective conditions-minimum average adsorbate height and minimum adlayer roughness-were imposed. As a result, a series of adlayer patterns with c(px radical3)R30 degrees symmetry (2.3 < p < 3), with precise structural details, including atomic registry and identification of the p-bisector as the most likely trajectory for the iodine adatom movement during the so-called uniaxial compression phenomenon, were identified. In addition, using the same model, the difference between the iodine adlayer arranged in hexagonal and centered-rectangular c(px radical3)R30 degrees patterns, as in the case of Pt(111) and Au(111) surfaces, was investigated. Qualitative and quantitative comparison shows that iodine adatoms in these two arrangements differ significantly in atomic registry, distance from the substrate, and the adlayer corrugation. Our findings could be of special interest in the study of the nature of the iodine adatom bonding to different substrates (i.e., Au vs Pt).

Classification of hexagonal adlayer arrangements by means of collective geometrical properties.

Unequal-sphere packing model is applied for the simulation of large number of hexagonal adlayer structures with surface coverage between theta=13 and theta=1 on the hexagonal substrate, with atomic radius of the adsorbate and substrate atoms as the only input. Each structure is characterized with respect to collective adlayer properties: the average adlayer height and the adlayer roughness. The distribution of hexagonal arrangements is presented in a special plot, which can be used for identification and characterization of hexagonal adlayers of different surface coverages and atomic registries. The most likely structures are related to the extreme values of our model parameters. The usefulness of this methodology is successfully demonstrated by comparison with some real adsorbate-substrate systems, i.e., halogens and rare gases adsorbed on (111) surface. Besides the agreement with experimental results, our model offers new insight into the formation of atomic adlayers and detailed analysis of the atomic registry. We believe that our approach will be of use for identification of probable structures among the large number of combinatorial possibilities in theoretical studies and for better interpretation of experimental results (i.e., scanning-tunneling microscopy images of atomic adlayers).

Potential energy landscape of monolayer-surface systems governed by repulsive lateral interactions: the case of (3 x 3)-I-Pt(111).

Combined density functional theory (DFT) and Monte Carlo (MC) approach is applied to study the potential energy landscape of four iodine atoms adsorbed on the Pt(111) surface in a (3 x 3) unit cell. Three critical points were identified: (3 x 3)-sym and (3 x 3)-asym, corresponding to structures well known from experimental studies, while the third one (3 x 3)-zigzag is a new structure not reported before. An interaction model fitted to DFT calculations allows us to explain the difference between arrangements of iodine monolayer in vacuum, air, and solution environments as a result of different repulsion regimes.

Detailed characterization of (3 x 3) iodine adlayer on Pt(111) by unequal-sphere packing model.

A simple unequal-sphere packing model is applied to study the iodine (3x3) adlayer on the Pt(111) surface. By using a newly introduced parameter, defined as the average adsorbate height, three characteristic adlattices, (3x3)-sym, (3x3)-asym, and (3x3)-lin, have been selected and characterized in great detail, including the exact adatom registry. The (3x3)-sym iodine adlattice, observed in many experimental studies, appears to be, on average, the closest one to the substrate surface. A special contour plot of average adsorbate height vs X and Y positions of the (3x3) iodine unit cell indicates the existence of two local minima, which are related to preferential formation of (3x3)-sym and (3x3)-asym iodine adlattices. Our model gives good agreement with experimental findings, and explains the mechanism of preferential appearance of (3x3)-sym and (3x3)-asym structures.