Development of a Novel, Ecologically Friendly Generation of pH-Responsive Alginate Nanosensors: Synthesis, Calibration, and Characterisation.

Measurement of the intracellular pH is particularly crucial for the detection of numerous diseases, such as carcinomas, that are characterised by a low intracellular pH. Therefore, pH-responsive nanosensors have been developed by many researchers due to their ability to non-invasively detect minor changes in the pH of many biological systems without causing significant biological damage. However, the existing pH-sensitive nanosensors, such as the polyacrylamide, silica, and quantum dots-based nanosensors, require large quantities of organic solvents that could cause detrimental damage to the ecosystem. As a result, this research is aimed at developing a new generation of pH-responsive nanosensors comprising alginate natural polymers and pH-sensitive fluorophores using an organic, solvent-free, and ecologically friendly method. Herein, we successfully synthesised different models of pH-responsive alginate nanoparticles by varying the method of fluorophore conjugation. The synthesised pH nanosensors demonstrated a low MHD with a relatively acceptable PDI when using the lowest concentration of the cross-linker Ca+2 (1.25 mM). All the pH nanosensors showed negative zeta potential values, attributed to the free carboxylate groups surrounding the nanoparticles' surfaces, which support the colloidal stability of the nanosensors. The synthesised models of pH nanosensors displayed a high pH-responsiveness with various correlations between the pH measurements and the nanosensors' fluorescence signal. In summation, pH-responsive alginate nanosensors produced using organic, solvent-free, green technology could be harnessed as potential diagnostics for the intracellular and extracellular pH measurements of various biological systems.

Smart Pellets for Controlled Delivery of 5-Fluorouracil.

This work aimed to develop a new one-pot and readily scaled-up formulation capable of retaining 5-fluorouracil and prolonging its release to obtain a site-specific medication delivery for the potential treatment of colorectal cancer. Six polymer-based formulations were successfully produced using a thermal bulk polymerization method and loaded with 5-fluorouracil, which is a chemotherapeutic agent used in the treatment of colorectal carcinoma. The pellets produced were characterized by measuring the glass transition temperature, tensile strength, Young's modulus, and tensile elongation at break. Studies on in vitro swelling and release were carried out in phosphate-buffered saline to evaluate the behaviour of the developed system. The Young's modulus, glass transition temperature, and tensile strength all increased significantly as the crosslinker concentration increased, but the fracture strain value reduced significantly. The in vitro swelling profile of the produced formulations was significantly reduced by increasing crosslinking density. Less than 27% cumulative drug release was achieved for all formulations after 5 h of starting the release study. The highest cumulative drug release reached after 24 h was 69%. The developed drug delivery system demonstrated the ability to delay the release of 5-fluorouracil in upper gastrointestinal tract-mimicking conditions, while permitting its release in a controlled way afterward, which makes it promising for the potential delivery of 5-fluorouracil to the colon.

Drying Using Supercritical Fluid Technology as a Potential Method for Preparation of Chitosan Aerogel Microparticles.

Supercritical fluid technology offers several advantages in preparation of microparticles. These include uniformity in particle size, morphology, and drug distribution without degradation of the product. One of the recent advantages is preparation of porous aerogel carrier with proper aerodynamic properties. In this study, we aimed to prepare chitosan aerogel microparticles using supercritical fluid (SCF) technology and compare that with microparticles produced by freeze drying (FD). Loading the prepared carriers with a model drug (salbutamol) was also performed. Comparisons of the particle properties and physicochemical characterizations were undertaken by evaluating particle size, density, specific surface area, and porosity. In vitro drug release studies were also investigated. The effect of many variables, such as molecular weight of chitosan oligomers, concentrations of chitosan, and concentrations of tripolyphosphate on the release, were also investigated. Chitosan aerogels were efficiently produced by SCF technology with an average particle size of 10 µm with a tapped density values around 0.12 g/mL, specific surface area (73-103) m(2)/g, and porosity (0.20-0.29) cc/g. Whereas, microparticles produced by FD method were characterized as cryogels with larger particle size (64 microns) with clear cracking at the surface. Sustained release profile was achieved for all prepared microparticles of salbutamol produced by the aforementioned methods as compared with pure drug. The results also demonstrates that chitosan molecular weight, polymer concentration, and tripolyphosphate concentration affected the release profile of salbutamol from the prepared microparticles. In conclusion, SCF technology was able to produce chitosan aerogel microparticles loaded with salbutamol that could be suitable for pulmonary drug delivery system.

The Prevalence of Risk Factors for Cardiovascular Diseases in Najran Region, Saudi Arabia.

The primary goal of this study was to investigate the knowledge, prevalence, and risk factors of cardiovascular diseases among individuals in the Najran region of Saudi Arabia. In the Najran region of Saudi Arabia, an online cross-sectional survey was conducted. Between September and October 2023, a self-administered questionnaire was distributed to a random sample of the general population aged 18 and up. The survey instrument asked about history and exposure, physician-diagnosed illnesses, cardiovascular diseases (CVDs), medication use, and other risk factors. This research had a total of 2046 individuals. Around one-fifth of the study participants reported that they or a family member suffered from CVD, and arrhythmia was the most commonly reported; blood tests, cardiac catheterization, and ECG were the most commonly reported tests performed for CVD patients, around one-tenth of CVD patients reported that they do not have any chronic diseases other than CVD, and the vast majority of the patients confirmed their regular medical appointments. This is one of the first studies to investigate the knowledge, prevalence, and use of CVD drugs among individuals in the Najran region of Saudi Arabia. The study participants' lack of knowledge about CVD could lead to ineffective preventive measures and poor patient outcomes. The study's findings underscore the crucial need for more extensive and efficient educational initiatives that consider the targeted population's talents, attitudes, and perceptions.

Dual stimuli-responsive delivery system for self-regulated colon-targeted delivery of poorly water-soluble drugs.

Inflammatory bowel disease (IBD) are chronic inflammatory conditions which cause significant patient morbidity. Local drug delivery to the colon can improve treatment efficacy and reduce side effects associated with IBD treatment. Smart drug delivery systems are designed to regulate the release of therapeutic agents at the desired site of action. pH-responsive drug carriers have been previously utilised for improved oral drug delivery beyond stomach harsh conditions. Additionally, the colon possesses a diverse microbiome secreting bioactive molecules e.g., enzymes, that can be exploited for targeted drug delivery. We herein synthesised and characterised a 2-hydroxyethyl methacrylate and methacrylic acid copolymer, crosslinked with an azobenzyl crosslinker, that displayed pH- and enzyme-responsive properties. The swelling and drug release from hydrogel were analysed in pH 1.2, 6.5 and 7.4 buffers, and in the presence of rat caecal matter using metronidazole and mesalamine as model BCS Class I and IV drugs, respectively. Swelling studies displayed pH-responsive swelling behaviour, where swelling was maximum at pH 7.4 and minimum at pH 1.2 (69 % versus 32 %). Consequently, drug release was limited in gastric and small intestinal conditions but increased significantly when exposed to colonic conditions containing caecal matter. This system displays promising capacity for achieving colon-targeted drug delivery with enhanced dissolution of poorly water-soluble drugs for local treatment of IBD and other colon-targeted therapies.

Development and Characterization of Econazole Topical Gel.

The purpose of this work was to develop a novel topical formulation of econazole nitrate based on gel that can be easily scaled up in one pot for the potential treatment of fungal and yeast infections. Econazole nitrate, a topical antifungal, is used to treat tinea versicolor, tinea pedis, and tinea cruris. Compared to applying cream or ointment, topical gels offer numerous advantages, one of which is that the drug is released more quickly to the intended site of action. A viscous mixture of propylene glycol, Capmul® MCM C8, methyl and propyl paraben, and econazole nitrate were mixed together before being formulated into the optimized Carbopol® gel bases. The gel's color, appearance, and homogeneity were assessed visually. For every formulation, the drug content, pH, viscosity, spreadability, and gel strength were characterized. The cup plate diffusion method was used to evaluate the anti-fungal activity of the prepared formulations. To assess the behavior of the developed system, studies on in vitro release and mechanism were conducted. The manufactured formulations were transparent, pale yellow, and exhibited excellent homogeneity. The pH of each formulation was roughly 6.0, making them suitable for topical use. The concentration of Carbopol® 940 resulted in a significant increase in viscosity and gel strength but a significant decrease in spreadability. It was demonstrated that the prepared formulations inhibited the growth of Candida albicans and Aspergillus fumigatus. In contrast, the standard blank gel showed no signs of antifungal action. By increasing the concentration of Carbopol® 940, the in vitro release profile of econazole nitrate significantly decreased. Following the Korsmeyer-Peppas model fitting, all formulations exhibited n values greater than 0.5 and less than 1, indicating that diffusion and gel swelling control econazole nitrate release.

Development of a Polyherbal Topical Gel for the Treatment of Acne.

The present work aimed to formulate and evaluate a polyherbal gel using Aloe barbadensis and extract of Vigna radiata for the treatment of acne, a disorder of the skin in which hair follicles and sebaceous glands are blocked, causing inflammation and redness of the skin. Aloe barbadensis pulp was collected and mixed with the extract of Vigna radiata and formulated into a gel using Carbopol 940, triethanolamine, and propylene glycol as the gelling agent, viscosity modifier, and pH modifier, respectively. The gel was evaluated for its antimicrobial properties against Staphylococcus aureus, Escherichia coli, and Candida albicans. Antimicrobial agents, such as gentamycin and fluconazole, were used as the standards. The developed formulation showed promising zone of inhibition. The gel was further evaluated for its physicochemical properties. The formulation showed a promising effect on acne together with the additive effect of Aloe barbadensis on skin.

Target protein degradation by protacs: A budding cancer treatment strategy.

Cancer is one of the most common causes of death. So, its lethal effect increases with time. Near about hundreds of cancers are known in humans. Cancer treatment is done to cure or prolonged remission, and shrinkage of the tumor. Cytotoxic agents, biological agents/targeted drugs, hormonal drugs, surgery, radiotherapy/proton therapy, chemotherapy, immunotherapy, and gene therapy are currently used in the treatment of cancer but their cost is high and cause various side effects. Seeing this, some new targeted strategies such as PROTACs are the need of the time. Proteolysis targeting chimera (PROTAC) has become one of the most discussed topics regarding cancer treatment. Few of the PROTAC molecules are in the trial phases. PROTACs have many advantages over other strategies such as modularity, compatibility, sub-stoichiometric activity, acting on undruggable targets, molecular design, and acts on intracellular targets, selectivity and specificity can be recruited for any cancer, versatility, and others. PROTACs are having some unclear questions on their pharmacokinetics, heavy-molecular weight, etc. PROTACs are anticipated to bring about a conversion in current healthcare and will emerge as booming treatments. In this review article we summarize PROTACs, their mechanism of action, uses, advantages, disadvantages, challenges, and future aspects for the successful development of potent PROTACs as a drug strategy.

Combating Microbial Infections Using Metal-Based Nanoparticles as Potential Therapeutic Alternatives.

The nature of microorganisms and the efficiency of antimicrobials have witnessed a huge co-dependent change in their dynamics over the last few decades. On the other side, metals and metallic compounds have gained popularity owing to their effectiveness against various microbial strains. A structured search of both research and review papers was conducted via different electronic databases, such as PubMed, Bentham, Springer, and Science Direct, among others, for the present review. Along with these, marketed products, patents, and Clinicaltrials.gov were also referred to for our review. Different microbes such as bacteria, fungi, etc., and their diverse species and strains have been reviewed and found to be sensitive to metal-carrying formulations. The products are observed to restrict growth, multiplication, and biofilm formation effectively and adequately. Silver has an apt use in this area of treatment and recovery, and other metals like copper, gold, iron, and gallium have also been observed to generate antimicrobial activity. The present review identified membrane disruption, oxidative stress, and interaction with proteins and enzymes to be the primary microbicidal processes. Elaborating the action, nanoparticles and nanosystems are shown to work in our favor in well excelled and rational ways.

Development and Characterization of Gel-Based Buccoadhesive Bilayer Formulation of Nifedipine.

A promising controlled drug delivery system has been developed based on polymeric buccoadhesive bilayered formulation that uses a drug-free backing layer and a polymeric hydrophilic gel buccoadhesive core layer containing nifedipine. The DSC thermogravimetric analysis confirms the drug's entrapment in the gel layer and reveals no evidence of a potential interaction. Various ratios of bioadhesive polymers, including HPMC K100, PVP K30, SCMC, and CP 934, were combined with EC as an impermeable backing layer to ensure unidirectional drug release towards the buccal mucosa. The polymeric compositions of hydrophilic gel-natured HPMC, SCMC, and CP formed a matrix layer by surrounding the core nifedipine during compression. Preformulation studies were performed for all of the ingredients in order to evaluate their physical and flow characteristics. Ex vivo buccoadhesive strength, surface pH, swelling index, in vitro and in vivo drug release, and ex vivo permeation investigations were performed to evaluate the produced gel-based system. Rapid temperature variations had no appreciable impact on the substance's physical properties, pharmacological content, or buccoadhesive strength during stability testing using actual human saliva. It was clear from a histological examination of the ex vivo mucosa that the developed system did not cause any irritation or inflammation at the site of administration. The formulation NT5 was the best one, with a correlation coefficient of 0.9966. The in vitro and in vivo drug release profiles were well correlated, and they mimic the in vitro drug release pattern via the biological membrane. Thus, the developed gel-based formulation was found to be novel, stable, and useful for the targeted delivery of nifedipine.

Facile Fabrication of Methyl Gallate Encapsulated Folate ZIF-L Nanoframeworks as a pH Responsive Drug Delivery System for Anti-Biofilm and Anticancer Therapy.

Zeolitic imidazole frameworks are emerging materials and have been considered an efficient platform for biomedical applications. The present study highlights the simple fabrication of methyl gallate encapsulated folate-ZIF-L nanoframeworks (MG@Folate ZIF-L) by a simple synthesis. The nanoframeworks were characterized by different sophisticated instruments. In addition, the drug-releasing mechanism was evidenced by in vitro releasing kinetics at various pH conditions. The anti-biofilm potential confirmed by the biofilm architectural deformations against human infectious pathogens MRSA and N7 clinical strains. Furthermore, anticancer efficacy assessed against A549 lung cancer cells. The result reveals that the MG@Folate ZIF-L exposed a superior cytotoxic effect due to the pH-responsive and receptor-based drug-releasing mechanism. Based on the unique physicochemical and biological characteristics of nanoframeworks, it has overcome the problems of undesired side effects and uncontrolled drug release of existing drug delivery systems. Finally, the in vitro toxicity effect of MG@Folate ZIF-L was tested against the Artemia salina (A. salina) model organism, and the results show enhanced biocompatibility. Overall, the study suggested that the novel MG@Folate ZIF-L nanoframeworks is a suitable material for biomedical applications. It will be very helpful to the future design for targeted drug delivery systems.

Development of Polymeric-Based Formulation as Potential Smart Colonic Drug Delivery System.

Conventional oral formulations are mainly absorbed in the small intestine. This limits their use in the treatment of some diseases associated with the colon, where the drug has to act topically at the inflammation site. This paved the way for the development of a smart colonic drug delivery system, thereby improving the therapeutic efficacy, reducing the dosing frequency and potential side effects, as well as improving patient acceptance, especially in cases where enemas or other topical preparations may not be effective alone in treating the inflammation. In healthy individuals, it takes an oral medication delivery system about 5 to 6 h to reach the colon. A colonic drug delivery system should delay or prohibit the medication release during these five to six hours while permitting its release afterward. The main aim of this study was to develop a smart drug delivery system based on pH-sensitive polymeric formulations, synthesized by a free-radical bulk polymerization method, using different monomer and crosslinker concentrations. The formulations were loaded with 5-amino salicylic acid as a model drug and Capmul MCM C8 as a bioavailability enhancer. The glass transition temperature (Tg), tensile strength, Young's modulus, and tensile elongation at break were all measured as a part of the dried films' characterization. In vitro swelling and release studies were performed to assess the behavior of the produced formulations. The in vitro swelling and release evaluation demonstrated the potential ability of the developed system to retard the drug release at conditions mimicking the stomach and small intestine while triggering its release at conditions mimicking the colon, which indicates its promising applicability as a potential smart colonic drug delivery system.

Mucilage of Coccinia grandis as an Efficient Natural Polymer-Based Pharmaceutical Excipient.

Natural eco-friendly materials are recently employed in products to replace synthetic materials due to their superior benefits in preserving the environment. The herb Coccinia grandis is widely distributed in continents like Asia and Africa and used traditionally to treat fever, leprosy, asthma, jaundice, and bronchitis. Mucilage of Coccinia grandis was accordingly extracted, isolated by a maceration technique, and precipitated. The mucilage was evaluated for its physicochemical, binding, and disintegrant properties in tablets using paracetamol as a model drug. The crucial physicochemical properties such as flow properties, solubility, swelling index, loss on drying, viscosity, pH, microbial load, cytotoxicity was evaluated and the compatibility was analyzed using sophisticated instrumental methods (TGA, DTA, DSC, and FTIR). The binding properties of the mucilage was used at three different concentrations and compared with starch and PVP as examples of standard binders. The disintegrant properties of mucilage were used at two different concentrations and compared with standard disintegrants MCCP, SSG, and CCS. The tablets were punched and evaluated for their hardness, friability, assay, disintegration time, in vitro dissolution profiles. In vitro cytotoxicity studies of the mucilage were performed in a human embryonic kidney (HEK) cell line. The outcome of the study indicated that the mucilage had good performance compared with starch and PVP. Further, the mucilage acts as a better disintegrant than MCCP, SSG and CCS for paracetamol tablets. Use of a concentration of 3% or less demonstrated the ability of the mucilage to act as a super disintegrating agent and showed faster disintegration and dissolution, which makes it as an attractive, promising disintegrant in formulating solid dosage forms to improve the therapeutic efficacy and patient compliance. Moreover, the in vitro cytotoxicity evaluation results demonstrated that the mucilage is non-cytotoxic to human cells and is safe.

In silico Screening of Natural Phytocompounds Towards Identification of Potential Lead Compounds to Treat COVID-19.

COVID-19 is one of the members of the coronavirus family that can easily assail humans. As of now, 10 million people are infected and above two million people have died from COVID-19 globally. Over the past year, several researchers have made essential advances in discovering potential drugs. Up to now, no efficient drugs are available on the market. The present study aims to identify the potent phytocompounds from different medicinal plants (Zingiber officinale, Cuminum cyminum, Piper nigrum, Curcuma longa, and Allium sativum). In total, 227 phytocompounds were identified and screened against the proteins S-ACE2 and M pro through structure-based virtual screening approaches. Based on the binding affinity score, 30 active phytocompounds were selected. Amongst, the binding affinity for beta-sitosterol and beta-elemene against S-ACE2 showed -12.0 and -10.9 kcal/mol, respectively. Meanwhile, the binding affinity for beta-sitosterol and beta-chlorogenin against M pro was found to be -9.7 and -8.4 kcal/mol, respectively. Further, the selected compounds proceeded with molecular dynamics simulation, prime MM-GBSA analysis, and ADME/T property checks to understand the stability, interaction, conformational changes, binding free energy, and pharmaceutical relevant parameters. Moreover, the hotspot residues such as Lys31 and Lys353 for S-ACE2 and catalytic dyad His41 and Cys145 for M pro were actively involved in the inhibition of viral entry. From the in silico analyses, we anticipate that this work could be valuable to ongoing novel drug discovery with potential treatment for COVID-19.

Production, immunogenicity, stability, and safety of a vaccine against Clostridium perfringens beta toxins.

BACKGROUND AND AIM: The beta toxin is causing the most severe Clostridium perfringens-related diseases. This work was dedicated to developing a vaccine against beta toxin using C. perfringens type C (NCTC 3180). MATERIALS AND METHODS: The crude toxoid harvest contained 710 limits of flocculation (Lf)/mL. The vaccine was formulated. Each 1 mL of the final vaccine product contained at least 50 Lf/mL of beta toxoids, 0.2 mL 3% aluminum hydroxide gel (equivalent to 5.18 mg of aluminum), <0.001% W/V thiomersal, formaldehyde <0.05% W/V, and ~0.7 mL phosphate-buffered saline (pH 7.2). The efficacy of the vaccine was evaluated by potency, stability, and safety tests. RESULTS: The vaccine demonstrated 24.36 IU/mL (standard deviation, ±0.56) and 14.74 IU/mL (±0.36) of neutralizing antibodies in rabbits and cattle, respectively. Indeed, these levels were above the minimum recommended by international protocols since the obtained antibody levels had 2.43- and 1.47-fold increase in both rabbits and cattle, respectively, over the minimum antitoxin level suggested by the United States Department of Agriculture. Interestingly, our formulation was capable of inducing 1.65-fold higher immune responses in rabbits than that stimulated in cattle (65% increase) with a significant difference (p<0.0001). The vaccine was stable up to 30 months. The vaccinated rabbits were suffered from a temporarily slight increase in temperatures in the first 10 h without any significant difference (p>0.05). CONCLUSION: The research showed a procedure for the manufacturing process of the vaccine against C. perfringens beta toxins with a feasible quantity and the vaccine described here showed to be effective in eliciting levels of neutralizing antibodies higher than required by international standards. In addition, The vaccine was stable up to 30 months. Thus, it may represent an effective and safe for preventing C. perfringens-related diseases in rabbits and cattle, although further studies to prove its efficacy in the field on other farm animals are still needed.