Carbon Nanoflakes and Nanotubes from Halloysite Nanoclays and their Superior Performance in CO2 Capture and Energy Storage.

Nanoporous carbon (HNC) with a flake and nanotubular morphology and a high specific surface area is prepared by using natural halloysite nanotubes (HNTs), a low-cost and naturally available clay material with a mixture of flaky and tubular morphology. A controlled pore-filling technique is used to selectively control the porosity, morphology, and the specific surface area of the HNC. Activated nanoporous carbon (AHNC) with a high specific surface area is also prepared by using HNT together with the activation process with zinc chloride (ZnCl2). HNC exhibits flakes and tubular morphologies, which offer a high specific surface area (837 m2/g). The specific surface area of AHNC is 1646 m2/g, 74 times greater than the specific surface area of pure HNT (22.5 m2/g). These data revealed that the single-step activation combined with the nanotemplating results in creating a huge impact on the specific surface area of the HNC. Both HNC and AHNC are employed as adsorbents for CO2 adsorption at different pressures and adsorption temperatures. The CO2 adsorption capacity of AHNC is 25.7 mmol/g at 0 °C, which is found to be significantly higher than that of activated carbon (AC), mesoporous carbon (CMK-3), mesoporous carbon nitride (MCN-1), and multiwalled carbon nanotube (MWCNT). AHNC is also tested as an electroactive material and demonstrates good supercapacitance, cyclic stability, and high capacitance retention. Specific capacitance of AHNC in the aqueous electrolyte is 197 F/g at 0.3 A/g, which is higher than that of AC, MWCNT, and CMK-3. The technique adopted for the preparation of both HNC and AHNC is quite unique and simple, has the potential to replace the existing highly expensive and sophisticated mesoporous silica-based nanotemplating strategy, and could also be applied for the fabrication of series of advanced nanostructures with unique functionalities.

Characterization and Hydrogen Storage Performance of Halloysite Nanotubes.

Here we report on the structural characterization and the hydrogen storage performance of naturally derived halloysite nanotubes (HNTs). HNTs were mined from different deposits in Australia and purified with different processes including crushing, blunging, reblunging, sedimentation and filtration. The clay materials were characterized by different techniques such as powder XRD, TGA, XPS, FTIR spectroscopy, SEM, TEM, and N2 sorption. Characterization results revealed that they are highly porous in nature with tubular morphology and exhibited excellent thermal stability. Among the halloysite materials studied, HNT1 which is having higher halloysite content and less kaolinite exhibited hydrogen uptake of 0.5 wt.% at 1 bar and -196 °C, which is increased to 1.33 wt.% when the pressure raised to 48 bar. High hydrogen uptake was linked with the high surface area, hollow tubular aluminosilicate structure and the large interlayer spacing of the HNTs as they favour physisorption of hydrogen. It was also demonstrated that HNT1 is considered to be better material than some of the materials reported so far in terms of their cost-effectiveness and environmental safety for the hydrogen storage.