Carbodiimide/NHS derivatization of COOH-terminated SAMs: activation or byproduct formation?

COOH-terminated self-assembled monolayers (SAMs) are widely used in biosensor technology to bind different amine-containing biomolecules. A covalent amide bond, however, can be achieved only if the carboxylic acids are activated. This activation process usually consists of forming an N-hydroxysuccinimidyl ester (NHS-ester) by consecutively reacting carboxylic acids with a carbodiimide and NHS. Though many papers report using this method,1-8 the experimental conditions vary greatly between them and chemical characterization at this stage is often omitted. Evidence of an efficient activation is therefore rarely shown. Furthermore, recent publications9-11 have highlighted the complexity of this process, with the possible formation of different byproducts. In this paper, we have conducted a study on NHS activation under different conditions with chemical characterization by polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Our results indicate that the nature of the solvent and carbodiimide and the reactant concentrations play crucial roles in activation kinetics and efficiency.

High Performance All-Polymer Photodetector Comprising a Donor-Acceptor-Acceptor Structured Indacenodithiophene-Bithieno[3,4-c]Pyrroletetrone Copolymer.

The synthesis of an acceptor polymer PIDT-2TPD, comprising indacenodithiophene (IDT) as the electron-rich unit and an interconnected bithieno[3,4-c]pyrrole-4,4',6,6'-tetrone (2TPD) as the electron-deficient unit, and its application for all-polymer photodetectors is reported. The optical, electrochemical, charge transport, and device properties of a blend of poly(3-hexylthiophene) and PIDT-2TPD are studied. The blend shows strong complementary absorption and balanced electron and hole mobility, which are desired properties for a photoactive layer. The device exhibits dark current density in the order of 10-5 mA/cm2, external quantum efficiency broadly above 30%, and nearly planar detectivity over the entire visible spectral range (maximum of 1.1 × 1012 Jones at 610 nm) under -5 V bias. These results indicate that PIDT-2TPD is a highly functional new type of acceptor and further motivate the use of 2TPD as a building block for other n-type materials.

High-Performance Organic Photodetectors from a High-Bandgap Indacenodithiophene-Based π-Conjugated Donor-Acceptor Polymer.

A conjugated donor-acceptor polymer, poly[4,4,9,9-tetrakis(4-hexylphenyl)-4,9-dihydro- s-indaceno[1,2- b:5,6- b']dithiophene-2,7-diyl- alt-5-(2-ethylhexyl)-4 H-thieno[3,4- c]pyrrole-4,6(5 H)-dione-1,3-diyl] (PIDT-TPD), is blended with the fullerene derivative [6,6]phenyl-C61-butyric acid methyl ester (PC61BM) for the fabrication of thin and solution-processed organic photodetectors (OPDs). Systematic screening of the concentration ratio of the blend and the molecular weight of the polymer is performed to optimize the active layer morphology and the OPD performance. The device comprising a medium molecular weight polymer (27.0 kg/mol) in a PIDT-TPD:PC61BM 1:1 ratio exhibits an external quantum efficiency of 52% at 610 nm, a dark current density of 1 nA/cm2, a detectivity of 1.44 × 1013 Jones, and a maximum 3 dB cutoff frequency of 100 kHz at -5 V bias. These results are remarkable among the state-of-the-art red photodetectors based on conjugated polymers. As such, this work presents a functional organic active material for high-speed OPDs with a linear photoresponse at different light intensities.