Evaluation of the single and combined therapeutic effects of individually manufactured earplug therapy in patients with myogenous temporomandibular disorders: A randomized controlled clinical trial.

OBJECTIVE: To evaluate the effect of individually manufactured earplug therapy on pain intensity (PI), symptom severity (SS), and maximum mouth opening (MMO), in patients with myogenous temporomandibular disorders (TMD). METHODS: One-hundred-twenty patients were randomly allocated to six groups: Groups EP (earplug), OS (occlusal splint), EX (exercise), EPO (earplug with occlusal splint), EPE (earplug with exercise), and C (control). Outcomes were PI (assessed with a visual analog scale (VAS)), SS (assessed with the modified Symptom Severity Index Questionnaire (mSSI)), and MMO (evaluated with a digital caliper). Measurements were performed at T0 (before the therapy), T1 (1-month follow-up), and T2 (3-month follow-up). Data were analyzed using one-way analysis of variance (ANOVA), Tukey's HSD, and chi-square tests (alpha = 0.05). RESULTS: At T1 and T2, the greatest VAS and mSSI reduction was detected for the groups EPE (VAS = 5.3 ± 1.05, 3.3 ± 0.7; mSSI = 38.2 ± 2.27, 43.6 ± 3.94) and EPO (VAS = 5.2 ± 0.91, 3.2 ± 0.78; mSSI = 36.3 ± 3.97, 42.2 ± 3.19), respectively (p < 0.05). At T1, occlusal splint groups (groups OS (34.8 ± 2.97 mm) and EPO (33.8 ± 3.49 mm)) gave the highest MMO values, while T2 values did not constitute a significant difference with T1 (p > 0.05). CONCLUSIONS: The short-term use of combined earplug therapy resulted in a decrease in both PI and SS. Improvement in MMO in participants using occlusal splints was observed in the 1st month and was maintained through the 3rd month. CLINICAL RELEVANCE: Earplug therapy can be applied as a complementary therapy to occlusal splint and exercise treatments to decrease PI and SS in patients with myogenous TMD. To achieve functional recovery such as MMO, its combined use with splints should be taken into consideration by clinicians.

Ozone Therapy for a Soccer Player With Osteitis Pubis: A Case Report.

CONTEXT: Osteitis pubis (OP), which occurs as a result of excessive use of the symphysis pubis and parasymphysis bones, is more common in long-distance runners and kicking athletes, especially football players. Due to the poor results of commonly used treatments for OP, there is a need for investigation of more effective treatments, such as ozone therapy. Ozone therapy is used to treat a variety of diseases, including musculoskeletal conditions. CASE PRESENTATION: A 30-year-old amateur soccer player diagnosed with OP received conservative treatment with traditional physiotherapy and analgesic medications. After 6 months and no resolution of symptoms, the patient presented to the sports medicine outpatient clinic seeking alternative therapy options. MANAGEMENT AND OUTCOMES: The patient received ozone injections in 3 sessions administered at 10-day intervals. At 1, 3, 6 and 12 months after the treatment, the patient's complaints and pain levels were re-evaluated and examined. The patient was able to return to competition at the same level after the first injection. No recurrence was revealed at a minimum of 12 months of follow-up. CONCLUSION: In this article, we present a case in which OP was successfully treated with ozone injection.

Short-term effect of material type and thickness of occlusal splints on maximum bite force and sleep quality in patients with sleep bruxism: a randomized controlled clinical trial.

OBJECTIVE: To evaluate the short-term effects of hard and soft splints of different thicknesses on maximum bite force (MBF) and sleep quality (SQ) in participants with sleep bruxism (SB). METHODS: One-hundred-fifteen patients were randomly allocated to five groups: Groups H2(Hard splint-2 mm), H3(Hard splint-3 mm), S2(Soft splint-2 mm), S3(Soft splint-3 mm), and C (control). Outcomes were MBF (assessed with a digital gnathodynamometer) and SQ (assessed with the Pittsburgh Sleep Quality Index). Measurements were performed at T0 (before the splints), T1 (1-month follow-up), and T2 (2-months follow-up). Data were analyzed using one-way analysis of variance(ANOVA), Tukey's HSD, and chi-square tests (alpha = 0.05). RESULTS: At T1, the highest MBF values were observed in group H3 (658.01 ± 22.6 N), while the lowest in group S2 (585.45 ± 8.68 N). For T2, the highest values were obtained in H3 group (676.85 ± 21.9 N), and the lowest in group S2 (565.65 ± 10.9 N) (p < 0.05).For SQ, groups S2 and S3 revealed the lowest PSQI values at T1 (9.1; 9.6) and T2 (9; 9.5) (p < 0.001). CONCLUSIONS: The short-term use of both 2 and 3-mm thick soft splints resulted in a decrease in MBF. Improvement in SQ in patients using soft splints was observed in the 1st month and was maintained in the 2nd month. CLINICAL RELEVANCE: This study provides insights on short-term clinical effects as regards to increased sleep quality and regulated maximum bite force as a function of splint material type and the thickness of the splint.

Mechanical and chemical characterization of contemporary occlusal splint materials fabricated with different methods: a systematic review.

OBJECTIVE: To systematically review studies on various occlusal splint materials and describe their mechanical and chemical properties. METHODS: MEDLINE (PubMed), Scopus, and Web of Science searches were conducted for in vitro studies focusing on occlusal splint materials. Two reviewers performed an assessment of the identified studies and data abstraction independently, and this was complimented by an additional hand search. The articles were limited to those in the English language that were published between January 1st, 2012, and December 1st, 2022. RESULTS: The initial search yielded 405 search results of which 274 were selected for full-text review following abstract evaluation. 250 articles that did not meet the inclusion criteria were excluded, and the remaining 25 articles (with 1 article identified from the reference lists of included articles) providing mechanical and chemical values were used in this review. Poly methyl methacrylate (PMMA) -based occlusal splint materials showed the highest values in terms of hardness, wear resistance, flexural strength, flexural modulus, e-modulus, and fracture toughness. The material group with the highest water sorption and water solubility was 3D printed (PR) splint materials. In addition, the lowest degree of double bond conversion was also observed in this group of materials. CONCLUSIONS: The outcome of this review suggests that mechanically and chemically acceptable properties can be attained with PMMA-based occlusal splint materials using both conventional and digital production methods. PR splint materials should not be considered as the primary choice for long-term treatments due to their low mechanical and chemical properties. CLINICAL RELEVANCE: This review provides clinical recommendations for selecting the appropriate material and fabrication method for occlusal splints while taking the patients' needs and the materials´ mechanical and chemical properties into account.

Orofacial manifestations and dental management of systemic lupus erythematosus: A review.

Systemic lupus erythematosus (SLE) is an autoimmune multisystem disease with numerous clinical manifestations. There is no consensus about the ideal oral management for this group of patients to date. This review aimed to describe the broad spectrum of orofacial and clinical manifestations and their therapeutic approaches. Studies concerning orofacial manifestations of SLE and dental treatment modalities were selected by a literature search (1978-2019) using Google Scholar, PubMed/MEDLINE electronic databases. The initial search strategy provided a total of 129 articles, and of these, 30 were included for qualitative synthesis. The reviewed studies revealed that SLE patients are more at risk of compromised oral and dental health exhibiting increased risk of periodontal diseases and temporomandibular joint disorders. The use of systemic drugs especially immunosuppressive and anticoagulants in SLE patients may also influence their oral management. Results emphasize the need to carry out, at an early stage of the disease, an appropriate oral management of these patients to improve oral health-related quality of life and to prevent the need of more invasive therapeutics. A multidisciplinary approach is needed for dental and medical management of such patients.

Cross-sectional areas of rectus abdominis and psoas muscles reduces following surgery in rectal cancer patients.

PURPOSE: To evaluate the trophic changes in rectus abdominis and psoas muscles in patients who underwent open or laparoscopic rectum resection for rectal cancer. METHODS: We retrospectively analyzed preoperative staging computerized tomographies (CT) and postoperative first oncological follow-up CTs of the patients who underwent low anterior resection (LAR) for rectal cancer from 2010 through 2015. We measured cross-sectional area of left and right rectus abdominis muscles from two levels (above and below umbilicus) where they are widest and psoas muscle at mid-level of the fourth lumbar vertebral body in axial CT images and compared preoperative and postoperative measurements. We investigated the effects of age, sex, administration of preoperative chemoradiotherapy (CRT), type of surgery (open or laparoscopic), or construction of a diverting ileostomy on cross-sectional muscle area changes. RESULTS: After applying inclusion and exclusion criteria 60 patients found to be eligible for the study. Muscle areas of all measurement sites were reduced postoperatively compared to paired preoperative values. There was no significant effect of age, sex, administration of preoperative CRT, type of surgery (open or laparoscopic), or construction of a diverting ileostomy to muscle cross-sectional area reductions. CONCLUSION: Cross-sectional areas of the rectus abdominis and the psoas muscles of rectal cancer patients reduces following rectum resection which indicates atrophy of these muscles. Clinicians should be aware of this problem and focus on prevention of muscle atrophy during the treatment of rectal cancer patients.

Surface characterization and bonding properties of milled polyetheretherketone dental posts.

PEEK has been used in many dental applications except intra-radicular post. The aim of this study is to test polyetheretherketone (PEEK) as a dental post material through tensile bond strength (TBS) and surface roughness (SR), and to compare it with glass-fiber and cast-metal posts. Thus, 60 human maxillary central incisors with a single root were endodontically treated and divided into three groups (n = 20) according to the type of post (Group P: PEEK, Group F: Glass-fiber, Group M: Cast-metal). Appropriate surface treatment was employed for each group and SR was determined by a three-dimensional non-contact profilometer before cementation. All posts were luted to the canal dentin using self-etch resin cement (Panavia F2.0). Pull-out test was performed on a universal testing machine at a speed of 0.5 mm/min crosshead speed until failure, and TBS were calculated. One-way ANOVA, Tukey's HSD, and Pearson chi-squared tests were performed for statistical analyses (α = 0.05). According to the results, group F demonstrated the highest SR (2.93 ± 0.18 µm) and lowest TBS values (10.05 ± 0.53 MPa), while group P exhibited lowest SR (1.37 ± 0.11 µm) and highest TBS values (14.33 ± 0.58 MPa) (p < 0.001). No significant differences in failure modes were identified among groups, mostly adhesive (p = 0.243). As conclusion, PEEK may be a reliable and contemporary option for dental post systems when used with appropriate surface treatment and luting agent. This high-performance polymer may be a novel candidate as a contemporary dental post system due to its superior mechanical, chemical, thermal, and esthetical properties with low risk of fracture.

Surface roughness and wear behavior of occlusal splint materials made of contemporary and high-performance polymers.

With the development of a digital technology of computer-assisted manufacturing (CAD/CAM) and new age materials, the use of new types of occlusal splint is to consider. The aim of the present study was to evaluate the surface roughness (Ra) and wear behavior of different CAD/CAM materials against enamel antagonist through a simulated chewing test. A total of 75 specimens made from ethylene vinyl acetate (EVA), polymethyl methacrylate (PMMA), polycarbonate (PC), polyetheretherketone (PEEK), and polyethyleneterephthalate (PETG) as a control were polished to evaluate the Ra before loading by optical profilometry and further analyzed by scanning electron microscopy (SEM). Specimens of each group were subjected to thermomechanical fatigue loading in a chewing simulator (60000 cycles at 49 N with 5-55 °C thermocycling). The wear volume loss and change in Ra of each specimen after the simulated chewing were analyzed. One-way ANOVA, paired samples t test, and Pearson correlation analysis were performed for statistical analyzes. The result showed that the volume loss and Ra varied among the materials tested. EVA exhibited the greatest amount of Ra and volume loss (p < 0.001), while PEEK had the lowest values for both (p < 0.001). In terms of volume loss, there was no significant difference between PC and PMMA (p > 0.05). SEM investigations revealed different wear behaviors, especially in EVA. As PEEK showed significantly more favorable results, PEEK splints should be considered as a new therapeutic option for occlusal splint.

MRI of pelvic endometriosis: evaluation of the mr#Enzian classification and the importance of adenomyosis subtypes.

PURPOSE: This study aimed to investigate the utility of the #Enzian classification in magnetic resonance imaging (MRI) for endometriosis assessment, focusing on inter-reader agreement, diagnostic accuracy, and the correlation of adenomyosis with deep endometriosis (DE). METHODS: This IRB- approved retrospective single-center study included 412 women who underwent MRI evaluation for endometriosis between February 2017 and June 2022. Two experienced radiologists independently analyzed MRI images using the #Enzian classification and assessed the type of adenomyosis, if any. The surgical #Enzian classification served as the gold standard for evaluating preoperative MRI results of 45 patients. Statistical analysis was performed to assess inter-reader agreement and diagnostic accuracy. RESULTS: Inter-reader agreement was substantial to excellent (Cohen's kappa 0.75-0.96) for most compartments except peritoneal involvement (0.39). The preoperative MRI showed mostly substantial to excellent accuracy (0.84-0.98), sensitivity (0.62-1.00), specificity (0.87-1.00), positive (0.58-1.00) and negative predictive values (0.86-1.00) for most compartments, except for peritoneal lesions (0.36, 0.17, 1.00, 1.00, 0.26 respectively). A trend with a higher prevalence of concordant DE in women with MR features of external adenomyosis compared to those with internal adenomyosis was visible (p = 0.067). CONCLUSIONS: The mr#Enzian showed mostly high inter-reader agreement and good diagnostic accuracy for various endometriosis compartments. MRI's role is particularly significant in the context of the current paradigm shift towards medical endometriosis treatment. The inclusion of information about the type of adenomyosis in the mr#Enzian classification could enhance diagnostic accuracy and inform treatment planning.