RESUMO
Midfacial morphology varies between hominoids, in particular between great apes and humans for which the face is small and retracted. The underlying developmental processes for these morphological differences are still largely unknown. Here, we investigate the cellular mechanism of maxillary development (bone modelling, BM), and how potential changes in this process may have shaped facial evolution. We analysed cross-sectional developmental series of gibbons, orangutans, gorillas, chimpanzees and present-day humans (n = 183). Individuals were organized into five age groups according to their dental development. To visualize each species's BM pattern and corresponding morphology during ontogeny, maps based on microscopic data were mapped onto species-specific age group average shapes obtained using geometric morphometrics. The amount of bone resorption was quantified and compared between species. Great apes share a highly similar BM pattern, whereas gibbons have a distinctive resorption pattern. This suggests a change in cellular activity on the hominid branch. Humans possess most of the great ape pattern, but bone resorption is high in the canine area from birth on, suggesting a key role of canine reduction in facial evolution. We also observed that humans have high levels of bone resorption during childhood, a feature not shared with other apes.
Assuntos
Reabsorção Óssea , Hominidae , Animais , Humanos , Hominidae/anatomia & histologia , Hylobates , Estudos Transversais , Gorilla gorilla , Pan troglodytes , Morfogênese , Evolução BiológicaRESUMO
Enamel mechanical properties vary across molar crowns, but the relationship among mechanical properties, tooth function, and phylogeny are not well understood. Fifteen primate lower molars representing fourteen taxa (catarrhine, n = 13; platyrrhine, n = 1) were sectioned in the lingual-buccal plane through the mesial cusps. Gradients of enamel mechanical properties, specifically hardness and elastic modulus, were quantified using nanoindentation from inner (near the enamel-dentine junction), through middle, to outer enamel (near the outer enamel surface) at five positions (buccal lateral, buccal cuspal, occlusal middle, lingual cuspal, lingual lateral). Cuspal positions had higher mechanical property values than lateral positions. Middle enamel had higher mean hardness and elastic modulus values than inner and outer locations in all five crown positions. Functionally, the thicker-enameled buccal cusps of lower molars did not show evidence of increased resistance to failure; instead, lingual cusps-which show higher rates of fracture-had higher average mechanical property values, with no significant differences observed between sides. Preliminary phylogenetic results suggest there is relatively little phylogenetic signal in gradients of mechanical properties through the enamel or across the crown. There appears to be common mechanical property patterns across molar crowns in Catarrhini and potentially among primates more broadly. These results may allow more precise interpretations of dental biomechanics and processes resulting in mechanical failure of enamel in primates, such as wear and fracture.
Assuntos
Dente , Animais , Filogenia , Primatas , Coroas , Cercopithecidae , Dureza , Esmalte DentárioRESUMO
The cyamella is a rare, generally asymptomatic, knee sesamoid bone located in the proximal tendon of the popliteal muscle. Only two studies have investigated cyamella presence/absence in humans, putting ossified prevalence rates at 0.57%-1.8%. We aim to (a) determine cyamella prevalence in a Korean population, (b) examine coincident development of the cyamella and fabella, and (c) perform a systematic review and meta-analysis on the cyamella in humans. Medical computed tomography scans of 106 individuals were reviewed. A systematic review and meta-analysis were performed following PRISMA guidelines. Cyamellae were found in 3/212 knees (1.4%), and presence/absence was uncorrelated to height, age, and sex. The cyamella was not found coincidentally with the fabella, although the statistical power was low. Our systematic review/meta-analysis revealed cyamellae were generally asymptomatic and ossification could occur at 14 years. Cyamellae were equally likely to be found in both sexes, knees, one or both knees, and there appeared to be no global variation in prevalence rates. Cyamellae were found in three distinct locations. There is little support for the role of intrinsic genetic and/or environmental factors in cyamella development in humans. However, the apparent phylogenetic signal in Primates suggests genetics plays a role in cyamella development. We propose a cyamella classification system based on cyamella location (Class I, popliteal sulcus; Class II, tibial condyle; Class III, fibular head) and hypothesize locations may correspond to distinct developmental pathways, and cyamella function may vary with location.
Assuntos
Calcinose/epidemiologia , Articulação do Joelho , Ossos Sesamoides/anormalidades , Tendões/anormalidades , Humanos , Prevalência , República da Coreia/epidemiologiaRESUMO
The fabella is a sesamoid bone located in the gastrocnemius behind the lateral femoral condyle. In humans, fabellae are 3.5 times more common today than they were 100 years ago, with prevalence rates varying between and within populations. In particular, fabellae have been assumed to be more common in Asians than non-Asians, equally common in men and women, potentially more common in older individuals, and bilateral cases (one per knee) appear to be more common than unilateral ones. The roles of genetic and environmental factors in this phenotypic variation have been hypothesized, but not rigorously investigated. Given its clinical and evolutionary significance (i.e. being associated with several knee ailments, causing medical issues on its own, interfering with medical devices, and being less common in humans than in other mammals), it is important comprehensively to understand prevalence rate variation, and the roles of genetics and environmental factors in that variation. To address these questions, we performed a meta-analysis on data from studies published from 1875 to 2018 to investigate possible variation in sexual dimorphic (n = 22 studies, 7911 knees), ontogenetic (n = 10 studies, 4391 knees), and global (n = 65 studies, 21 626 knees) fabella prevalence rates. In addition, we investigated what proportion of cases are bilateral (n = 37 studies, 900 individuals), and among unilateral cases (n = 20 studies, 204 individuals), if fabellae are more common in the left or right knee. Our results show that, today, fabellae are 2.47-2.60% more common in men than women, and prevalence rates increase ontogenetically in old age (i.e. 70 years old), implying that fabellae can ossify early (i.e. 12 years old) or late in life. Approximately 72.94% of cases are bilateral, and among unilateral ones, fabellae are equally common in right and left knees. There is marked regional variation in fabella prevalence rates, with rates being highest in Asia, followed by Oceania, South America, Europe, Middle East, and North America, and lowest in Africa. Worldwide, an average of 36.80% of knees has ossified fabellae detectable by dissection. These results imply that, while the ability to form a fabella may be genetically controlled, the mechanisms that trigger fabella ossification may be environmentally controlled. What these environmental factors are, can only be speculated.
Assuntos
Articulação do Joelho/anatomia & histologia , Músculo Esquelético/anatomia & histologia , Ossos Sesamoides/anatomia & histologia , Evolução Biológica , Feminino , Humanos , MasculinoRESUMO
Diet plays an incontrovertible role in primate evolution, affecting anatomy, growth and development, behavior, and social structure. It should come as no surprise that a myriad of methods for reconstructing diet have developed, mostly utilizing the element that is not only most common in the fossil record but also most pertinent to diet: teeth. Twenty years ago, the union of traditional, anatomical analyses with emerging scanning and imaging technologies led to the development of a new method for quantifying tooth shape and reconstructing the diets of extinct primates. This method became known as dental topography.
Assuntos
Dente Molar/anatomia & histologia , Primatas/anatomia & histologia , Animais , Antropologia Física , Dieta , Comportamento Alimentar/fisiologia , Feminino , Humanos , Masculino , OdontometriaRESUMO
The fabella is a sesamoid bone located behind the lateral femoral condyle. It is common in non-human mammals, but the prevalence rates in humans vary from 3 to 87%. Here, we calculate the prevalence of the fabella in a Korean population and investigate possible temporal shifts in prevalence rate. A total of 52.83% of our individuals and 44.34% of our knees had fabellae detectable by computed tomography scanning. Men and women were equally likely to have a fabella, and bilateral cases (67.86%) were more common than unilateral ones (32.14%). Fabella presence was not correlated with height or age, although our sample did not include skeletally immature individuals. Our systematic review yielded 58 studies on fabella prevalence rate from 1875-2018 which met our inclusion criteria, one of which was an outlier. Intriguingly, a Bayesian mixed effects generalized linear model revealed a temporal shift in prevalence rates, with the median prevalence rate in 2000 (31.00%) being ~ 3.5 times higher than that in 1900 (7.64%). In all four countries with studies before and after 1960, higher rates were always found after 1960. Using data from two other systematic reviews, we found no increase in prevalence rates of 10 other sesamoid bones in the human body, indicating that the increase in fabella prevalence rate is unique. Fabella presence/absence is due to a combination of genetic and environmental factors: as the prevalence rates of other sesamoid bones have not changed in the last 100 years, we postulate the increase in fabella prevalence rate is due to an environmental factor. Namely, the global increase in human height and weight (due to improved nutrition) may have increased human tibial length and muscle mass. Increases in tibial length could lead to a larger moment arm acting on the knee and on the tendons crossing it. Coupled with the increased force from a larger gastrocnemius, this could produce the mechanical stimuli necessary to initiate fabella formation and/or ossification.
Assuntos
Prevalência , Ossos Sesamoides , Adulto , Feminino , Humanos , Articulação do Joelho/anatomia & histologia , Coreia (Geográfico) , Masculino , Pessoa de Meia-IdadeRESUMO
Though late Middle Pleistocene in age, Homo naledi is characterized by a mosaic of Australopithecus-like (e.g., curved fingers, small brains) and Homo-like (e.g., elongated lower limbs) traits, which may suggest it occupied a unique ecological niche. Ecological reconstructions inform on niche occupation, and are particularly successful when using dental material. Tooth shape (via dental topography) and size were quantified for four groups of South African Plio-Pleistocene hominins (specimens of Australopithecus africanus, Paranthropus robustus, H. naledi, and Homo sp.) on relatively unworn M2s to investigate possible ecological differentiation in H. naledi relative to taxa with similar known geographical ranges. H. naledi has smaller, but higher-crowned and more wear resistant teeth than Australopithecus and Paranthropus. These results are found in both lightly and moderately worn teeth. There are no differences in tooth sharpness or complexity. Combined with the high level of dental chipping in H. naledi, this suggests that, relative to Australopithecus and Paranthropus, H. naledi consumed foods with similar fracture mechanics properties but more abrasive particles (e.g., dust, grit), which could be due to a dietary and/or environmental shift(s). The same factors that differentiate H. naledi from Australopithecus and Paranthropus may also differentiate it from Homo sp., which geologically predates it, in the same way. Compared to the great apes, all hominins have sharper teeth, indicating they consumed foods requiring higher shear forces during mastication. Despite some anatomical similarities, H. naledi likely occupied a distinct ecological niche from the South African hominins that predate it.
Assuntos
Dieta , Fósseis/anatomia & histologia , Hominidae/anatomia & histologia , Hominidae/fisiologia , Dente Molar/anatomia & histologia , Animais , Evolução BiológicaRESUMO
Dental topography reflects diet accurately in several extant and extinct mammalian clades. However, dental topographic dietary reconstructions have high success rates only when closely related taxa are compared. Given the dietary breadth that exists among extant apes and likely existed among fossil hominins, dental topographic values from many species and subspecies of great apes are necessary for making dietary inferences about the hominin fossil record. Here, we present the results of one metric of dental topography, Dirichlet normal energy (DNE), for seven groups of great apes (Pongo pygmaeus pygmaeus, Pan paniscus, Pan troglodytes troglodytes and schweinfurthii, Gorilla gorilla gorilla, Gorilla beringei graueri and beringei). Dirichlet normal energy was inadequate at differentiating folivores from frugivores, but was adequate at predicting which groups had more fibrous diets among sympatric African apes. Character displacement analyses confirmed there is substantial dental topographic and relative molar size (M1:M2 ratio; length, width, and area) divergence in sympatric apes when compared to their allopatric counterparts, but character displacement is only present in relative molar size when DNE is also considered. Presence of character displacement is likely due to indirect competition over similar food resources. Assuming similar ecological conditions in the Plio-Pleistocene, the derived masticatory apparatuses of the robust australopiths and early Homo may be due to indirect competition over dietary resources between the taxa, causing dietary niche partitioning. Our results imply that dental topography cannot be used to predict dietary categories in fossil hominins without consideration of ecological factors, such as dietary and geographic overlap. In addition, our results may open new avenues for understanding the community compositions of early hominins and the formation of specific ecological niches among hominin taxa.
Assuntos
Dieta , Hominidae/anatomia & histologia , Dente/anatomia & histologia , Animais , Evolução Biológica , Feminino , Humanos , MasculinoRESUMO
Interdisciplinary research has benefitted the fields of anthropology and engineering for decades: a classic example being the application of material science to the field of feeding biomechanics. However, after decades of research, discordances have developed in how mechanical properties are defined, measured, calculated, and used due to disharmonies between and within fields. This is highlighted by "toughness," or energy release rate, the comparison of incomparable tests (i.e., the scissors and wedge tests), and the comparison of incomparable metrics (i.e., the stress and displacement-limited indices). Furthermore, while material scientists report on a myriad of mechanical properties, it is common for feeding biomechanics studies to report on just one (energy release rate) or two (energy release rate and Young's modulus), which may or may not be the most appropriate for understanding feeding mechanics. Here, I review portions of materials science important to feeding biomechanists, discussing some of the basic assumptions, tests, and measurements. Next, I provide an overview of what is mechanically important during feeding, and discuss the application of mechanical property tests to feeding biomechanics. I also explain how 1) toughness measures gathered with the scissors, wedge, razor, and/or punch and die tests on non-linearly elastic brittle materials are not mechanical properties, 2) scissors and wedge tests are not comparable and 3) the stress and displacement-limited indices are not comparable. Finally, I discuss what data gathered thus far can be best used for, and discuss the future of the field, urging researchers to challenge underlying assumptions in currently used methods to gain a better understanding between primate masticatory morphology and diet.
Assuntos
Ecologia , Comportamento Alimentar/fisiologia , Frutas/fisiologia , Verduras/fisiologia , Animais , Antropologia Física , Módulo de Elasticidade , Mastigação , PrimatasRESUMO
Over 40 years ago, Clifford Jolly noted different ways in which Hadropithecus stenognathus converged in its craniodental anatomy with basal hominins and with geladas. The Malagasy subfossil lemur Hadropithecus departs from its sister taxon, Archaeolemur, in that it displays comparatively large molars, reduced incisors and canines, a shortened rostrum, and thickened mandibular corpus. Its molars, however, look nothing like those of basal hominins; rather, they much more closely resemble molars of grazers such as Theropithecus. A number of tools have been used to interpret these traits, including dental microwear and texture analysis, molar internal and external morphology, and finite element analysis of crania. These tools, however, have failed to provide support for a simple dietary interpretation; whereas there is some consistency in the inferences they support, dietary inferences (e.g., that it was graminivorous, or that it specialized on hard objects) have been downright contradictory. Cranial shape may correlate poorly with diet. But a fundamental question remains unresolved: why do the various cranial and dental convergences exemplified by Hadropithecus, basal hominins, and Theropithecus exist? In this paper we review prior hypotheses regarding the diet of Hadropithecus. We then use stable carbon and nitrogen isotope data to elucidate this species' diet, summarizing earlier stable isotope analyses and presenting new data for lemurs from the central highlands of Madagascar, where Hadropithecus exhibits an isotopic signature strikingly different from that seen in other parts of the island. We offer a dietary explanation for these differences. Hadropithecus likely specialized neither on grasses nor hard objects; its staples were probably the succulent leaves of CAM plants. Nevertheless, aspects of prior hypotheses regarding the ecological significance of its morphology can be supported. Am. J. Primatol. 78:1098-1112, 2016. © 2015 Wiley Periodicals, Inc.
Assuntos
Isótopos de Carbono , Dieta , Fósseis , Isótopos de Nitrogênio , Strepsirhini , Animais , Feminino , Hominidae , Lemur , MadagáscarRESUMO
Legg-Calvé-Perthes' (Perthes') disease is a developmental disease of the hip joint that may result in numerous short and long term problems. The etiology of the disease remains largely unknown, but the mechanism is believed to be vascular and/or biomechanical in nature. There are several anatomical characteristics that tend to be prevalent in children with Perthes' disease, namely: skeletal immaturity, reduced height, and rostral sparing. We present an overview of the literature, summarizing the current understanding of the pathogenesis, particularly related to how the formation of the vasculature to the femoral epiphysis places children aged 5-8 at a higher risk for Perthes' disease, how skeletal immaturity and rostral sparing could increase the probability of developing Perthes' disease, and how animal models have aided our understanding of the disease. In doing so, we also explore why Perthes' disease is correlated to latitude, with populations at higher latitudes having higher incidence rates than populations closer to the Equator. Finally, we present five hypotheses detailing how Perthes' disease could have a biomechanical cause. Clin. Anat. 29:759-772, 2016. © 2016 Wiley Periodicals, Inc.
Assuntos
Doença de Legg-Calve-Perthes/etiologia , Animais , Epífises/irrigação sanguínea , Humanos , Incidência , Doença de Legg-Calve-Perthes/epidemiologia , Esqueleto/crescimento & desenvolvimento , Fatores Socioeconômicos , Poluição por Fumaça de Tabaco/efeitos adversosRESUMO
Mammalian molars have undergone heavy scrutiny to determine correlates between morphology and diet. Here, the relationship between one aspect of occlusal morphology, tooth cusp radius of curvature (RoC), and two broad dietary categories, folivory and frugivory, is analyzed in apes. The author hypothesizes that there is a relationship between tooth cusp RoC and diet, and that folivores have sharper teeth than frugivores, and further test the correlation between tooth cusp RoC and tooth cusp size. Eight measures of tooth cusp RoC (two RoCs per cusp) were taken from 53 M(2) s from four species and subspecies of frugivorous apes (Pongo pygmaeus, Pan troglodytes troglodytes, Pan troglodytes schweinfurthii, and Gorilla gorilla gorilla) and two subspecies of folivorous apes (Gorilla beringei beringei, and Gorilla beringei graueri). Phylogenetically corrected ANOVAs were run on the full dataset and several subsets of the full dataset, revealing that, when buccolingual RoCs are taken into account, tooth cusp RoCs can successfully differentiate folivores and frugivores. PCAs revealed that folivores consistently had duller teeth than frugivores. In addition, a weak, statistically significant positive correlation exists between tooth cusp size and tooth cusp RoC. The author hypothesizes differences in tooth cusp RoC are correlated with wear rates, where, per vertical unit of wear, duller cusps will have a longer length of exposed enamel ridge than sharper cusps. More data need to be gathered to determine if the correlation between tooth cusp RoC and tooth cusp size holds true when small primates are considered.
Assuntos
Hominidae/anatomia & histologia , Dente Molar/anatomia & histologia , Coroa do Dente/anatomia & histologia , Animais , Antropologia Física , Dieta , Comportamento Alimentar , Hominidae/classificação , Modelos EstatísticosRESUMO
Dental topographic analysis has proved a valuable tool for quantifying dental morphology. Established workflows often use proprietary software for pre-processing dental surfaces, rendering the method expensive and inaccessible to many. This study explores the use of freeware pre-processing alternatives. We tested 4 decimation tools and 13 smoothing tools across 7 different freeware packages. Surfaces generated via proprietary software could not be replicated, but it was possible to obtain statistically similar measurements using freeware. Based on this investigation, we propose a freeware workflow for researchers to conduct dental topographic analysis, with the expectation that their results will be comparable to that obtained through proprietary methods.
Assuntos
Software , Fluxo de TrabalhoRESUMO
We employed a probabilistic finite element analysis (FEA) method to determine how variability in material property values affects stress and strain values in a finite model of a Macaca fascicularis cranium. The material behavior of cortical bone varied in three ways: isotropic homogeneous, isotropic non-homogeneous, and orthotropic non-homogeneous. The material behavior of the trabecular bone and teeth was always treated as isotropic and homogeneous. All material property values for the cranium were randomized with a Gaussian distribution with either coefficients of variation (CVs) of 0.2 or with CVs calculated from empirical data. Latin hypercube sampling was used to determine the values of the material properties used in the finite element models. In total, four hundred and twenty six separate deterministic FE simulations were executed. We tested four hypotheses in this study: (1) uncertainty in material property values will have an insignificant effect on high stresses and a significant effect on high strains for homogeneous isotropic models; (2) the effect of variability in material property values on the stress state will increase as non-homogeneity and anisotropy increase; (3) variation in the in vivo shear strain values reported by Strait et al. (2005) and Ross et al. (2011) is not only due to variations in muscle forces and cranial morphology, but also due to variation in material property values; (4) the assumption of a uniform coefficient of variation for the material property values will result in the same trend in how moderate-to-high stresses and moderate-to-high strains vary with respect to the degree of non-homogeneity and anisotropy as the trend found when the coefficients of variation for material property values are calculated from empirical data. Our results supported the first three hypotheses and falsified the fourth. When material properties were varied with a constant CV, as non-homogeneity and anisotropy increased the level of variability in the moderate-to-high strains decreased while the level of variability in the moderate-to-high stresses increased. However, this is not the pattern observed when CVs calculated from empirical data were applied to the material properties where the lowest level of variability in both stresses and strains occurred when the cranium was modeled with a low level of non-homogeneity and anisotropy. Therefore, when constant material property variability is assumed, inaccurate trends in the level of variability present in modest-to-high magnitude stresses and strains are produced. When the cranium is modeled with the highest level of accuracy (high non-homogeneity and anisotropy) and when randomness in the material properties is calculated from empirical data, there is a large level of variability in the significant strains (CV=0.369) and a low level of variability in the modest-to-high magnitude stresses (CV=0.150). This result may have important implications with regard to the mechanical signals driving bone remodeling and adaptation through natural selection.
Assuntos
Macaca fascicularis/anatomia & histologia , Modelos Biológicos , Crânio/anatomia & histologia , Animais , Anisotropia , Cefalometria/métodos , Elasticidade , Análise de Elementos Finitos , Macaca fascicularis/fisiologia , Crânio/fisiologia , Estresse MecânicoRESUMO
Size and shape variation of molar crowns in primates plays an important role in understanding how species adapted to their environment. Gorillas are commonly considered to be folivorous primates because they possess sharp cusped molars which are adapted to process fibrous leafy foods. However, the proportion of fruit in their diet can vary significantly depending on their habitats. While tooth morphology can tell us what a tooth is capable of processing, tooth wear can help us to understand how teeth have been used during mastication. The objective of this study is to explore if differences in diet at the subspecies level can be detected by the analysis of molar macrowear. We analysed a large sample of second lower molars of Grauer's, mountain and western lowland gorilla by combining the Occlusal Fingerprint Analysis method with other dental measurements. We found that Grauer's and western lowland gorillas are characterised by a macrowear pattern indicating a larger intake of fruit in their diet, while mountain gorilla's macrowear is associated with the consumption of more folivorous foods. We also found that the consumption of herbaceous foods is generally associated with an increase in dentine and enamel wear, confirming the results of previous studies.
Assuntos
Gorilla gorilla , Desgaste dos Dentes , Animais , Frutas , Mastigação , Dente Molar , Desgaste dos Dentes/veterináriaRESUMO
Treating open fractures in long bones can be challenging and if not performed properly can lead to poor outcomes such as mal/non-union, deformity, and amputation. One of the most common methods of treating these fracture types is temporary external fixation followed by definitive fixation. The shortage of high-quality affordable external fixators is a long-recognised need, particularly in Low- and Middle-Income Countries (LMICs). This research aimed to develop a low-cost device that can be manufactured locally to international standards. This can provide surge capacity for conflict zones or in response to unpredictable incidents and situations. The fixator presented here and developed by us, the Imperial external fixator, was tested on femur and tibia specimens under 100 cycles of 100 N compression-tension and the results were compared with those of the Stryker Hoffmann 3 frame. The Imperial device was stiffer than the Stryker Hoffmann 3 with a lower median interfragmentary motion (of 0.94 vs. 1.48â mm). The low-cost, easy to use, relatively lightweight, and easy to manufacture (since minimum skillset and basic workshop equipment and materials are needed) device can address a critical shortage and need in LMICs particularly in conflict-affected regions with unpredictable demand and supply. The device is currently being piloted in three countries for road traffic accidents, gunshot wounds and other conflict trauma-including blast cohorts.
RESUMO
Hypotheses regarding patterns of stress, strain and deformation in the craniofacial skeleton are central to adaptive explanations for the evolution of primate craniofacial form. The complexity of craniofacial skeletal morphology makes it difficult to evaluate these hypotheses with in vivo bone strain data. In this paper, new in vivo bone strain data from the intraorbital surfaces of the supraorbital torus, postorbital bar and postorbital septum, the anterior surface of the postorbital bar, and the anterior root of the zygoma are combined with published data from the supraorbital region and zygomatic arch to evaluate the validity of a finite-element model (FEM) of a macaque cranium during mastication. The behavior of this model is then used to test hypotheses regarding the overall deformation regime in the craniofacial haft of macaques. This FEM constitutes a hypothesis regarding deformation of the facial skeleton during mastication. A simplified verbal description of the deformation regime in the macaque FEM is as follows. Inferior bending and twisting of the zygomatic arches about a rostrocaudal axis exerts inferolaterally directed tensile forces on the lateral orbital wall, bending the wall and the supraorbital torus in frontal planes and bending and shearing the infraorbital region and anterior zygoma root in frontal planes. Similar deformation regimes also characterize the crania of Homo and Gorilla under in vitro loading conditions and may be shared among extant catarrhines. Relatively high strain magnitudes in the anterior root of the zygoma suggest that the morphology of this region may be important for resisting forces generated during feeding.
Assuntos
Ossos Faciais/anatomia & histologia , Crânio/anatomia & histologia , Animais , Feminino , Análise de Elementos Finitos/normas , Macaca mulatta , Mastigação/fisiologia , Modelos Anatômicos , Reprodutibilidade dos Testes , Estresse MecânicoRESUMO
Diet is a driving force in human evolution. Two species of Plio-Pleistocene hominins, Paranthropus robustus and Australopithecus africanus, have derived craniomandibular and dental morphologies which are often interpreted as P. robustus having a more biomechanically challenging diet. While dietary reconstructions based on dental microwear generally support this, they show extensive dietary overlap between species, and craniomandibular and dental biomechanical analyses can yield contradictory results. Using methods from anthropology and engineering (i.e. anthroengineering), we quantified the molar biomechanical performance of these hominins to investigate possible dietary differences between them. Thirty-one lower second molars were 3D printed and used to fracture gelatine blocks, and Bayesian generalized linear models were used to investigate the relationship between species and tooth wear, size and shape, and biomechanical performance. Our results demonstrate that P. robustus required more force and energy to fracture blocks but had a higher force transmission rate. Considering previous dietary reconstructions, we propose three evolutionary scenarios concerning the dietary ecologies of these hominins. These evolutionary scenarios cannot be reached by investigating morphological differences in isolation, but require combining several lines of evidence. This highlights the need for a holistic approach to reconstructing hominin dietary ecology.
RESUMO
In recent decades, funding agencies, institutes and professional bodies have recognized the profound benefits of transdisciplinarity in tackling targeted research questions. However, once questions are answered, the previously abundant support often dissolves. As such, the long-term benefits of these transdisciplinary approaches are never fully achieved. Over the last several decades, the integration of anthropology and engineering through inter- and multidisciplinary work has led to advances in fields such as design, human evolution and medical technologies. The lack of formal recognition, however, of this transdisciplinary approach as a unique entity rather than a useful tool or a subfield makes it difficult for researchers to establish laboratories, secure permanent jobs, fund long-term research programmes and train students in this approach. To facilitate the growth and development and witness the long-term benefits of this approach, we propose the integration of anthropology and engineering be recognized as a new, independent field known as anthroengineering. We present a working definition for anthroengineering and examples of how anthroengineering has been used. We discuss the necessity of recognizing anthroengineering as a unique field and explore potential novel applications. Finally, we discuss the future of anthroengineering, highlighting avenues for moving the field forward.