RESUMO
Air-channel devices have a special advantage due to the promise of vacuum-like ballistic transport in air, radiation insensitivity, and nanoscale size. Here, achieving high current at low voltage along with considerable mechanical stability is a primary issue. The comparative analysis of four planar and metallic electrode-pair geometries at 10 nm channel length is presented. The impact of nano-electrode-pair geometries on overall device performance is investigated. Air-channel devices are operated at the ultra-low voltage of 5 mV to demonstrate the device dynamics of air-channel devices at low power. Investigations focus on the direct tunneling (DT) mechanism which is dominant in the low-voltage regime. Comparative analysis of different electrode-pair geometries reveals two orders of magnitude increment in the current just by modulating the electrode-pair structure. Theoretical analysis suggests that the emission current is directly related to the active junction area within the metal-air-metal interface at the direct tunneling regime. The geometry-dependent mechanical stability of different electrode pairs is compared by imaging biasing triggered nanoscale structural changes and pulsed biasing stress analysis. The results and claims are confirmed and consolidated with the statistical analysis. Experimental investigations provide strong directions for high-performance and stable devices. In-depth theoretical discussions will enable the accurate modeling of emerging low-power, high-speed, radiation-hardened nanoscale vacuum electronics.
Assuntos
Eletrônica , Transistores Eletrônicos , Metais/químicaRESUMO
We compared the outcome of COVID-19 in immunosuppressed solid organ transplant (SOT) patients to a transplant naïve population. In total, 10 356 adult hospital admissions for COVID-19 from March 1, 2020 to April 27, 2020 were analyzed. Data were collected on demographics, baseline clinical conditions, medications, immunosuppression, and COVID-19 course. Primary outcome was combined death or mechanical ventilation. We assessed the association between primary outcome and prognostic variables using bivariate and multivariate regression models. We also compared the primary endpoint in SOT patients to an age, gender, and comorbidity-matched control group. Bivariate analysis found transplant status, age, gender, race/ethnicity, body mass index, diabetes, hypertension, cardiovascular disease, COPD, and GFR <60 mL/min/1.73 m2 to be significant predictors of combined death or mechanical ventilation. After multivariate logistic regression analysis, SOT status had a trend toward significance (odds ratio [OR] 1.29; 95% CI 0.99-1.69, p = .06). Compared to an age, gender, and comorbidity-matched control group, SOT patients had a higher combined risk of death or mechanical ventilation (OR 1.34; 95% CI 1.03-1.74, p = .027).
Assuntos
COVID-19 , Transplante de Órgãos , Adulto , Humanos , Terapia de Imunossupressão , SARS-CoV-2 , TransplantadosRESUMO
The biomarker detection in human body fluids is crucial as biomarkers are important in diagnosing diseases. Conventional invasive techniques for biomarker detection are associated with infection, tissue damage, and discomfort. Non-invasive devices are an attractive alternative. Here, metal oxide (oxygen-deficient zinc oxide, ZnO) based conductometric sensors with two-terminal electrodes for rapid detection of biomarkers in real-time, are presented. This platform can be engineered for non-invasive, sensitive, and on-demand selective detection of biomarkers based on surface functionalization. The three novelties in this biosensing technique include an on-demand target selection device platform, short (<10 min) incubation times, and real-time monitoring of the biomarker of interest by electrical (resistance change) measurements. Cardiac inflammatory biomarkers interleukin 6 (IL-6) and C-reactive protein (CRP) are used as the model antigens. The devices can detect 100× lower concentration of IL-6 than healthy levels in human saliva and sweat and 1000× and ≈50× lower CRP concentrations than healthy levels in human saliva and sweat, respectively. The devices show high selectivity for IL-6 and CRP antigens when tested with a mixture of biomarkers. This sensor platform can be extended to selective measurements for viruses or DNA screening, which enables a new category of compact and rapid point-of-care medical devices.
Assuntos
Técnicas Biossensoriais , Condutometria , Biomarcadores , Eletrodos , Humanos , SuorRESUMO
Limited levels of UV exposure can be beneficial to the human body. However, the UV radiation present in the atmosphere can be damaging if levels of exposure exceed safe limits which depend on the individual the skin color. Hence, UV photochromic materials that respond to UV light by changing their color are powerful tools to sense radiation safety limits. Photochromic materials comprise either organic materials, inorganic transition metal oxides, or a hybrid combination of both. The photochromic behavior largely relies on charge transfer mechanisms and electronic band structures. These factors can be influenced by the structure and morphology, fabrication, composition, hybridization, and preparation of the photochromic materials, among others. Significant challenges are involved in realizing rapid photochromic change, which is repeatable, reversible with low fatigue, and behaving according to the desired application requirements. These challenges also relate to finding the right synergy between the photochromic materials used, the environment it is being used for, and the objectives that need to be achieved. In this review, the principles and applications of photochromic processes for transition metal oxides and hybrid materials, photocatalytic applications, and the outlook in the context of commercialized sensors in this field are presented.
Assuntos
Elementos de Transição , Raios Ultravioleta , Humanos , ÓxidosRESUMO
This publisher's note contains corrections to Opt. Lett.46, 4164 (2021)OPLEDP0146-959210.1364/OL.431285.
RESUMO
Polarization conversion is useful for studies of chiral structures in biology and chemistry, and for polarization diversity in communications. It is conventionally realized with wave plates, which, however, present challenges due to limited material availability, as well as narrow bandwidth and low efficiency at terahertz frequencies. To enhance bandwidth and efficiency, the concept of the Huygens' metasurface is adopted here for a transmissive half-wave plate. The half-wave metasurface is designed following the optimal frequency-independent circuit parameters provided by a broadband semi-analytical approach. Simulation results of an optimal design suggest that a 15-dB extinction ratio can be sustained from 219 GHz to 334 GHz, corresponding to a fractional bandwidth of 41.6%. The measured results indicate that the fabricated structure enables a 15-dB extinction ratio from 220 GHz to 303 GHz, with a cross-polarization transmission efficiency above 76.7% for both linear and circular polarizations. This half-wave metasurface design can be readily integrated into compact terahertz systems for diverse applications.
RESUMO
BACKGROUND: Several studies have shown that transplanting a hepatitis C virus (HCV)-negative recipients with a HCV-positive donor is feasible in a research setting. In February 2018, we began transplanting HCV-negative recipients with HCV-positive donors as standard of care. METHODS: All patients, except those with previously cured HCV and those with cirrhosis, were consented for HCV NAT-positive donor kidneys. After transplantation, patients were tested for HCV RNA until viremic. A direct-acting antiviral (DAA) agent was prescribed based on genotype and insurance approval. Sustained virologic response (SVR) at weeks 4 and 12 was recorded. Renal function and death censored graft survival at 1 year were evaluated and compared to recipients of HCV NAT-negative kidneys. RESULTS: A total of 25 HCV NAT-positive donor kidney transplants from February to October 2018 were performed. All patients received basiliximab and maintained with tacrolimus, mycophenolate mofetil, and prednisone. Median time from viremia to start of DAA was 13 (8-22) days. The most common genotype was 1a (60%), followed by 3a (28%). The most commonly prescribed DAA was ledipasvir/sofosbuvir (56%), followed by velpatasvir/sofosbuvir (32%), and then glecaprevir/pibrentasvir (12%). All patients achieved initial SVR12, except one. One patient had a mixed-genotype infection requiring retreatment to achieve SVR12. Death censored graft survival was 96%. Recipients of HCV NAT-positive organs compared to HCV NAT-negative organs received younger donors (mean 35 ± 8.9 vs 45.1 ± 15.7 years; P < .01) and spent less time on the waitlist (median 479 (93-582) vs 1808 (567-2263) days; P = .02). CONCLUSION: HCV NAT-negative recipients can be safely and successfully transplanted with HCV NAT-positive donor kidneys outside of a research protocol. Access to DAA and timely administration of therapy is important and an insurance approval process within the transplant center can be beneficial to patients. A case of mixed-genotype infection was presented, and although not as common, can be successfully treated. HCV organs can expand the organ pool and should no longer be considered experimental. The use of these organs in HCV-negative recipient's decreases waiting time, have excellent outcomes, and should be considered standard of care.
Assuntos
Hepatite C , Transplante de Rim , Antivirais/uso terapêutico , Hepacivirus , Hepatite C/tratamento farmacológico , Humanos , Doadores de TecidosRESUMO
There is minimal information on coronavirus disease 2019 (COVID-19) in immunocompromised individuals. We have studied 10 patients treated at 12 adult care hospitals. Ten kidney transplant recipients tested positive for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by polymerase chain reaction, and 9 were admitted. The median age was 57 (interquartile range [IQR] 47-67), 60% were male, 40% Caucasian, and 30% Black/African American. Median time from transplant to COVID-19 testing was 2822 days (IQR 1272-4592). The most common symptom was fever, followed by cough, myalgia, chills, and fatigue. The most common chest X-ray and computed tomography abnormality was multifocal patchy opacities. Three patients had no abnormal findings. Leukopenia was seen in 20% of patients, and allograft function was stable in 50% of patients. Nine patients were on tacrolimus and a mycophenolic antimetabolite, and 70% were on prednisone. Hospitalized patients had their antimetabolite agent stopped. All hospitalized patients received hydroxychloroquine and azithromycin. Three patients died (30%), and 5 (50%) developed acute kidney injury. Kidney transplant recipients infected with COVID-19 should be monitored closely in the setting of lowered immunosuppression. Most individuals required hospitalization and presenting symptoms were similar to those of nontransplant individuals.
Assuntos
Infecções por Coronavirus/complicações , Falência Renal Crônica/cirurgia , Transplante de Rim , Pneumonia Viral/complicações , Transplantados , Idoso , Betacoronavirus , COVID-19 , Teste para COVID-19 , Técnicas de Laboratório Clínico , Infecções por Coronavirus/diagnóstico , Infecções por Coronavirus/mortalidade , Cuidados Críticos , Registros Eletrônicos de Saúde , Feminino , Hospitalização , Humanos , Hospedeiro Imunocomprometido , Terapia de Imunossupressão/efeitos adversos , Falência Renal Crônica/complicações , Falência Renal Crônica/virologia , Masculino , Pessoa de Meia-Idade , New York/epidemiologia , Pandemias , Pneumonia Viral/mortalidade , SARS-CoV-2RESUMO
Far-infrared absorbers exhibiting wideband performance are in great demand in numerous applications, including imaging, detection, and wireless communications. Here, a nonresonant far-infrared absorber with ultra-wideband operation is proposed. This absorber is in the form of inverted pyramidal cavities etched into moderately doped silicon. By means of a wet-etching technique, the crystallinity of silicon restricts the formation of the cavities to a particular shape in an angle that favors impedance matching between lossy silicon and free space. Far-infrared waves incident on this absorber experience multiple reflections on the slanted lossy silicon side walls, being dissipated towards the cavity bottom. The simulation and measurement results confirm that an absorption beyond 90% can be sustained from 1.25 to 5.00 THz. Furthermore, the experiment results suggest that the absorber can operate up to at least 21.00 THz with a specular reflection less than 10% and negligible transmission.
RESUMO
The translation of biological synapses onto a hardware platform is an important step toward the realization of brain-inspired electronics. However, to mimic biological synapses, devices till-date continue to rely on the need for simultaneously altering the polarity of an applied electric field or the output of these devices is photonic instead of an electrical synapse. As the next big step toward practical realization of optogenetics inspired circuits that exhibit fidelity and flexibility of biological synapses, optically-stimulated synaptic devices without a need to apply polarity-altering electric field are needed. Utilizing a unique photoresponse in black phosphorus (BP), here reported is an all-optical pathway to emulate excitatory and inhibitory action potentials by exploiting oxidation-related defects. These optical synapses are capable of imitating key neural functions such as psychological learning and forgetting, spatiotemporally correlated dynamic logic and Hebbian spike-time dependent plasticity. These functionalities are also demonstrated on a flexible platform suitable for wearable electronics. Such low-power consuming devices are highly attractive for deployment in neuromorphic architectures. The manifestation of cognition and spatiotemporal processing solely through optical stimuli provides an incredibly simple and powerful platform to emulate sophisticated neural functionalities such as associative sensory data processing and decision making.
Assuntos
Fósforo/química , Sinapses/metabolismo , Luz , Microscopia Eletrônica de Transmissão , Plasticidade Neuronal/efeitos da radiação , Espectroscopia Fotoeletrônica , Sinapses/químicaRESUMO
Human Herpes Virus-8 (HHV-8) may reactivate in immunocompromised patients including recipients of solid organ transplants. Reactivation of HHV-8 may result in Kaposi sarcoma (KS). KS typically occurs with dermatologic involvement but can affect virtually any other organ; most commonly the gastrointestinal tract. We present a diagnostically challenging case of KS in a South American woman 7 months after kidney transplant. She presented with recurrent urinary tract infection manifested by pelvic pain and dysuria. Imaging studies revealed bladder thickening with pelvic lymphadenopathy. Findings on tissue biopsied from the bladder and lymph nodes were consistent with KS. Her skin was not affected. This case illustrates that KS and other HHV-8-related diseases should be on the differential diagnosis as a cause of mass lesions as well as lymphadenopathy in transplant recipients. The case exemplifies the need to pursue a tissue diagnosis in immunocompromised patients when a diagnosis is uncertain.
Assuntos
Cistite/virologia , Transplante de Rim/efeitos adversos , Sarcoma de Kaposi/diagnóstico , Transplantados , Adulto , Cistite/diagnóstico , Diagnóstico Diferencial , Feminino , Infecções por Herpesviridae/diagnóstico , Herpesvirus Humano 8/patogenicidade , Humanos , Hospedeiro Imunocomprometido , Terapia de Imunossupressão/efeitos adversos , Linfadenopatia/virologia , Bexiga Urinária/patologia , Bexiga Urinária/virologiaRESUMO
Scattering-free transport in vacuum tubes has always been superior to solid-state transistors. It is the advanced fabrication with mass production capability at low cost which drove solid-state nanoelectronics. Here, we combine the best of vacuum tubes with advanced nanofabrication technology. We present nanoscale, metal-based, field emission air channel transistors. Comparative analysis of tungsten-, gold-, and platinum-based devices is presented. Devices are fabricated with electron beam lithography, achieving channel lengths less than 35 nm. With this small channel length, vacuum-like carrier transport is possible in air under room temperature and pressure. Source and drain electrodes have planar, symmetric, and sharp geometry. Because of this, devices operate in bidirection with voltages <2 V and current values in few tens of nanoamperes range. The experimental data shows that influential operation mechanism is Fowler-Nordheim tunnelling in tungsten and gold devices, while Schottky emission in platinum device. The presented work enables a technology where metal-based switchable nanoelectronics can be created on any dielectric surface with low energy requirements.
RESUMO
Polarization conversion of terahertz waves is important for applications in imaging and communications. Conventional wave plates used for polarization conversion are inherently bulky and operate at discrete wavelengths. As a substitute, we employ reflective metasurfaces composed of subwavelength resonators to obtain similar functionality but with enhanced performance. More specifically, we demonstrate low-order dielectric resonators in place of commonly used planar metallic resonators to achieve high radiation efficiencies. As a demonstration of the concept, we present firstly, a quarter-wave mirror that converts 45° incident linearly polarized waves into circularly polarized waves. Next, we present a half-wave mirror that preserves the handedness of circularly polarized waves upon reflection, and in addition, rotates linearly polarized waves by 90° upon reflection. Both metasurfaces operate with high efficiency over a measurable relative bandwidth of 49% for the quarter-wave mirror and 53% for the half-wave mirror. This broadband and high efficiency capabilities of our metasurfaces will allow to leverage maximum benefits from a vast terahertz bandwidth.
RESUMO
As an alternative to metallic resonators, dielectric resonators can increase radiation efficiencies of metasurfaces at terahertz frequencies. Such subwavelength resonators made from low-loss dielectric materials operate on the basis of oscillating displacement currents. For full control of electromagnetic waves, it is essential that dielectric resonators operate around their resonant modes. Thus, understanding the nature of these resonances is crucial towards design implementation. To this end, an array of silicon resonators on a quartz substrate is designed to operate in transmission at terahertz frequencies. The resonator dimensions are tailored to observe their low-order modes of resonance at 0.58 THz and 0.61 THz respectively. We employ a terahertz near-field imaging technique to measure the complex near-fields of this dielectric resonator array. This unique method allows direct experimental observation of the first two fundamental resonances.
Assuntos
Anemia Hemolítica , Deficiência de Glucosefosfato Desidrogenase , Transplante de Rim , Anemia Hemolítica/induzido quimicamente , Anemia Hemolítica/diagnóstico , Dapsona/efeitos adversos , Glucose-6-Fosfato , Deficiência de Glucosefosfato Desidrogenase/complicações , Deficiência de Glucosefosfato Desidrogenase/diagnóstico , Humanos , TransplantadosRESUMO
We demonstrate a narrow-band plasmonic absorber based on a uniform array of nanoscale cylindrical dielectric resonators (DRs) on a metallic substrate at visible frequencies. Under a normally incident plane-wave excitation, the DRs resonate in their horizontal magnetic dipolar mode, which can be seen as localized plasmonic hot spots. Such a localized resonance also couples incident waves into surface plasmon polaritons (SPPs) bidirectionally, and perfect absorption is achieved by creating SPP standing waves. The simulation shows perfect absorption at 633 nm and 1.8% relative bandwidth with >90% absorption, while the measurement demonstrates maximum absorption of 90% at 636 nm. Both simulation and measurement results are analyzed with coupled mode theory. An additional numerical study elaborates on the dependence of absorption on the resonator size, period, and incidence angle.
RESUMO
Donor doping of perovskite oxides has emerged as an attractive technique to create high performance and low energy non-volatile analog memories. Here, we examine the origins of improved switching performance and stable multi-state resistive switching in Nb-doped oxygen-deficient amorphous SrTiO3 (Nb:a-STO x ) metal-insulator-metal (MIM) devices. We probe the impact of substitutional dopants (i.e., Nb) in modulating the electronic structure and subsequent switching performance. Temperature stability and bias/time dependence of the switching behavior are used to ascertain the role of substitutional dopants and highlight their utility to modulate volatile and non-volatile behavior in a-STO x devices for adaptive and neuromorphic applications. We utilized a combination of transmission electron microscopy, photoluminescence emission properties, interfacial compositional evaluation, and activation energy measurements to investigate the microstructure of the nanofilamentary network responsible for switching. These results provide important insights into understanding mechanisms that govern the performance of donor-doped perovskite oxide-based memristive devices.
RESUMO
The exhibition of plasmon resonances in two-dimensional (2D) semiconductor compounds is desirable for many applications. Here, by electrochemically intercalating lithium into 2D molybdenum disulfide (MoS2) nanoflakes, plasmon resonances in the visible and near UV wavelength ranges are achieved. These plasmon resonances are controlled by the high doping level of the nanoflakes after the intercalation, producing two distinct resonance peak areas based on the crystal arrangements. The system is also benchmarked for biosensing using bovine serum albumin. This work provides a foundation for developing future 2D MoS2 based biological and optical units.
Assuntos
Dissulfetos/química , Molibdênio/química , Ressonância de Plasmônio de SuperfícieRESUMO
The fascinating electronic and optoelectronic properties of free-standing graphene has led to the exploration of alternative two-dimensional materials that can be easily integrated with current generation of electronic technologies. In contrast to 2D oxide and dichalcogenides, elemental 2D analogues of graphene, which include monolayer silicon (silicene), are fast emerging as promising alternatives, with predictions of high degree of integration with existing technologies. This article reviews this emerging class of 2D elemental materials - silicene, germanene, stanene, and phosphorene--with emphasis on fundamental properties and synthesis techniques. The need for further investigations to establish controlled synthesis techniques and the viability of such elemental 2D materials is highlighted. Future prospects harnessing the ability to manipulate the electronic structure of these materials for nano- and opto-electronic applications are identified.
RESUMO
The concept of realizing electronic applications on elastically stretchable "skins" that conform to irregularly shaped surfaces is revolutionizing fundamental research into mechanics and materials that can enable high performance stretchable devices. The ability to operate electronic devices under various mechanically stressed states can provide a set of unique functionalities that are beyond the capabilities of conventional rigid electronics. Here, a distinctive microtectonic effect enabled oxygen-deficient, nanopatterned zinc oxide (ZnO) thin films on an elastomeric substrate are introduced to realize large area, stretchable, transparent, and ultraportable sensors. The unique surface structures are exploited to create stretchable gas and ultraviolet light sensors, where the functional oxide itself is stretchable, both of which outperform their rigid counterparts under room temperature conditions. Nanoscale ZnO features are embedded in an elastomeric matrix function as tunable diffraction gratings, capable of sensing displacements with nanometre accuracy. These devices and the microtectonic oxide thin film approach show promise in enabling functional, transparent, and wearable electronics.