Production of Volatile Compounds by a Variety of Fungi in Artificially Inoculated and Naturally Infected Aquilaria malaccensis.

Aquilaria malaccensis, the resinous agarwood, is highly valued in the perfumery and medicinal industry. The formation of fragrant agarwood resin inconsistently by various fungi is still not clearly understood. The current study investigated the agarwood quality and fungal diversity in artificially inoculated and naturally infected A. malaccensis. The chemical analysis of volatile compounds of agarwood was performed using the Solid Phase Micro Extraction (SPME) method, and the identification of fungi was made through a morphological observation using a light microscope. Gas chromatography analysis revealed the presence of essential compounds related to high-quality agarwood, such as 4-phenyl-2-butanone, ß-selinene, α-bulnesene, and agarospirol in both artificially inoculated and naturally infected agarwood but with some differences in the abundance. Further studies on the fungi associated with agarwood volatile compounds formation showed a total of ten fungal group isolates, which were identified based on morphological and molecular studies. The study revealed that agarwood from both artificial and natural sources were naturally infected with Fusarium, Botryosphaeria, Aspergillus, Schizophyllum, Phanerochaete, Lasiodiplodia, Polyporales, and Ceriporia species. This study has offered a potential opportunity to research further the promising development of fungal strains for artificial inducement of high-quality agarwood formation from A. malaccensis trees.

Advancement of fermentable sugars from fresh elephant ear plant weed for efficient bioethanol production.

Bioethanol is considered one of the most promising next-generation automotive fuels, as it is carbon neutral and can be produced from renewable resources, like lignocellulosic materials. The present research investigation aimed to utilize the elephant ear plant, a hazardous plant (weed) also considered an invasive species, as a font of non-edible lignocellulosic biomass for bioethanol production. The freshly collected elephant ear plant (leaves and stalk) was chopped into small pieces (1-2 cm) and then homogenized to a paste using a mechanical grinder. The sample pretreatment was done by flying ash for three different time durations (T1 = 0 min, T2 = 15 min, and T3 = 30 min) with 3 replications. All treatment samples were measured for total sugar and reducing sugar content. The concentration of reducing sugar archived was T1 = 0.771 ± 0.1 mg/mL, T2 = 0.907 ± 0.032 mg/mL, and T3 = 0.895 ± 0.039 mg/mL, respectively. The results revealed that the chemical composition was different among treatments. The hydrolysis was performed using cellulase enzymes at 35 °C for the hydrolysis process. The hydrolysate was inoculated with 1% of S. cerevisiae and maintained at room temperature without oxygen for 120 h. Bioethanol concentration was measured by using an ebulliometer. The efficient ethanol percentage was 1.052 ± 0.03 mg/mL achieved after the fermentation. Therefore, the elephant ear plant invasive weed could be an efficient feedstock plant for future bioethanol production.

Microalgae cultivation in wastewater effluent from tilapia culture pond for enhanced bioethanol production.

The large number of wastewaters are generated because of the various production processes. Vegetable and fish processing can be considered an important industry for wastewater generation. The essential method for completing this waste is to digest the organic matter using anaerobic digestion followed by aerobic wastewater treatment processes; however, wastewater from tilapia culture pond retains considerable quantities of inorganic substances, particularly nutrients like nitrogen and phosphorus. The optimal conditions for cultivating Chlorella vulgaris from wastewater treatment effluent from tilapia culture pond were investigated in this study. The appropriate conditions were found to be 10% initial stock suspension, 20 cm depth, and 12 days of culture conditions. C. vulgaris had an optical density of 0.649, a cell density of 17.68 × 105 cells/mL, and biomass of 0.376 ± 94.21 mg/L after cultivation. Discharged wastewater from the fishpond was utilized for the improved growth of microalgae and obtained biomass was used for bioethanol production. This study verified that fishpond wastewater is the best source of nutrients for algal mass production and biofuel applications.

Biomass generation and biodiesel production from macroalgae grown in the irrigation canal wastewater.

The wastewater concentration is commonly acceptable for macroalgae growth; this process consumes water and is applicable for bioremediation. This study evaluated biodiesel's potential production from freshwater macroalga, Nitella sp., using batch experiment. Algae were collected from wastewater saturated from irrigation canals. Water quality and algae growth environment characteristics were monitored and analyzed. COD and BOD values were 18.67 ± 4.62 mg/L and 5.40 ± 0.30 mg/L, respectively. The chemical composition contents were high, demonstrating that water quality and sufficient nutrients could support algae growth. Oil extraction was estimated by the room temperature and heat extraction methods. The biodiesel in room temperature treatment was 0.0383 ± 0.014%, and in heat, extraction treatment was 0.0723 ± 0.029%. Results confirmed that the heat extraction treatment gave a high amount of oil and biodiesel yield. Gas chromatography/mass spectrometry (GC/MS) was used to analyze fatty acid methyl esters (FAME). Results revealed that 9-octadecane was a major portion of the substance. The obtained results confirmed that the wastewater contains many elements that can be utilized for dual-mode, like bioremediation and enhanced macroalgae growth for biodiesel production. Therefore, macroalgae grown in canal wastewater were highly feasible for use in sustainable biodiesel production.

Advancement of lignin into bioactive compounds through selective organic synthesis methods.

The conversion of lignin into bioactive compounds through selective organic synthesis methods represents a promising frontier in the pursuit of sustainable raw materials and green chemistry. This review explores the versatility of lignin-derived bioactive compounds, ranging from their application in drug discovery to their role in the development of biodegradable materials. Despite notable advancements, the synthesis routes and yields of highly bioactive molecules from lignin still require further exploration and improvement. This review provides an in-depth examination of the progress made in understanding the complex structure of lignin and developing innovative approaches to exploit its potential. Specifically, the types of lignins covered include softwood Kraft lignin, hardwood organosolv lignin, and soda lignin. This work is divided into three parts: first, the transformation of lignin into bioactive molecules with chemically active centres and functionalised hydroxyl groups through depolymerisation; second, kinetic modelling techniques essential for understanding the chemical kinetics of lignin and enabling significant scaling up in the conversion of organic molecules; third, efficient catalytic pathways for synthesising molecules with anticancer and antibacterial properties. In conclusion, this comprehensive review spurs further investigations into lignin-derived bioactive compounds, their applications, and the advancement of sustainable processes.

Characterisation of synthesised trimetallic nanoparticles and its influence on anaerobic digestion of palm oil mill effluent.

The augmentation of biogas production can be achieved by incorporating metallic nanoparticles as additives within anaerobic digestion. The objective of this current study is to examine the synthesis of Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles using the co-precipitation technique and assess its impact on anaerobic digestion using palm oil mill effluent (POME) as carbon source. The structural morphology and size of the synthesised trimetallic nanoparticles were analysed using a range of characterization techniques, such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDX) . The average size of Fe-Ni-Zn and Fe-Co-Zn were 19-25.5 nm and 19.1-30.5 nm respectively. Further, investigation focused on examining the diverse concentrations of trimetallic nanoparticles, ranging from 0 to 50 mgL-1. The biogas production increased by 55.55% and 60.11% with Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles at 40 mgL-1 and 20 mgL-1, respectively. Moreover, the lowest biogas of 11.11% and 38.11% were found with 10 mgL-1 of Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles. The findings of this study indicated that the trimetallic nanoparticles exhibited interactions with anaerobes, thereby enhancing the degradation process of palm oil mill effluent (POME) and biogas production. The study underscores the potential efficacy of trimetallic nanoparticles as a viable supplement for the promotion of sustainable biogas generation.

Phytochemistry of Medicinal Herbs Belongs to Asclepiadaceae Family for Therapeutic Applications: A Critical Review.

The world of pharmaceutical research has been increasingly turning its gaze toward the treasure trove of natural products in search of novel drugs and therapeutic agents. Amidst the vast array of medicinal plants that dot our planet, the Asclepiadaceae family unexplored species have piqued the interest of researchers. Both medicinal plants are indigenous to specific regions and have been integral to traditional medicine systems for centuries. This systematic review aims to provide a comprehensive summary of the current knowledge regarding the phytochemical profile of these plants and their potential implications in the pharmaceutical industry. These plants are rich in phytochemical constituents such as alkaloids, flavonoids, terpenoids, phenolic compounds, glycosides, and saponins. These constituents have been found to exhibit a range of pharmacological activities. They have antimicrobial properties, providing a defense against various microorganisms. They also show anti-inflammatory properties, helping to reduce inflammation in the body. In addition, these plants have antioxidant properties, which help protect cells from damage by harmful free radicals. They have shown anticancer activity, offering potential for cancer treatment. Their neuroprotective properties could be beneficial in treating neurological disorders. The analgesic properties of these plants could be harnessed for pain relief. Furthermore, they have antidiabetic properties, offering potential for diabetes management. The hope is that this review will stimulate further research into these fascinating plants and contribute to discovering new drugs from natural herbs.

Unlocking the growth potential: harnessing the power of synbiotics to enhance cultivation of Pleurotus spp. / é‡Šæ”¾ç”Ÿé•¿æ½œåŠ›ï¼šåˆ©ç”¨åˆç”Ÿå ƒçš„åŠ›é‡åŠ å¼ºä¾§è€³å±žæ¤ç‰©ç§æ¤.

The oyster mushroom (Pleurotus spp.) is one of the most widely cultivated mushroom species globally. The present study investigated the effect of synbiotics on the growth and quality of Pleurotus ostreatus and Pleurotus pulmonarius. Different synbiotics formulations were applied by spraying mushroom samples daily and measuring their growth parameters, yield, biological efficiency, proximate composition, mineral content, total phenolic content (TPC), and diphenyl-1-picryl-hydrazyl (DPPH) radical scavenging activity. Results demonstrated that the most significant yield of oyster mushrooms was harvested from synbiotics sprayed with inulin and Lactobacillus casei (56.92 g). Likewise, the highest biological efficiency obtained with a similar synbiotic was 12.65%. Combining inulin and L. casei was the most effective method of improving the mushrooms' growth performance and nutrient content in both samples. Furthermore, synbiotics that combined inulin and L. casei resulted in the highest TPC (20.550 mg gallic acid equivalent (GAE)/g dry extract (DE)) in white oyster mushrooms (P. ostreatus). In comparison, in grey mushroom (P. pulmonarius) the highest TPC was yielded by L. casei (1.098 mg GAE/g DE) followed by inulin and L. casei (1.079 mg GAE/g DE). The DPPH results indicated that the oyster mushroom could be an efficient antioxidant. The results revealed that applying synbiotics improved the mushrooms' quality by increasing their antioxidant capacity with higher amounts of phenolic compounds and offering better health benefits with the increased levels of mineral elements. Together, these studies demonstrated the potential of using synbiotics as a biofertilizer, which is helpful for mushroom cultivation; therefore, it might solve the challenge of inconsistent quality mushroom growers face.

Phytochemical and Pharmacological Properties of a Traditional Herb, Strobilanthes Cusia (Nees) Kuntze.

The present investigation aimed to determine the effectiveness of bioactive components extracted from Hom herbs (Strobilanthes cusia (Nees) Kuntze) using the solvent-free microwave-assisted extraction (MAE) method. The obtained bioactive components were analyzed for total phenolic content (TPC) and active ingredient content. The Hom extracts were examined for antioxidant, antibacterial, anti-inflammatory, cytotoxic, and anticancer activities. The comparative analysis of extraction methods MAE was studied by using different solvents such as ethanol (EtOH), 50% ethanol (50EtOH) and distilled water (DW). The results obtained by the MAE method with DW as solvent show the TPC of 104.41±1.36 mg GAE/g crude and tryptanthrin 0.1138±0.0014 mg/g crude and indigo 0.0622±0.0015 mg/g crude. Comparatively, values ​​detected in the 50% EtOH extract were not significantly different at the 95% confidence level. At the same time, levels of indirubin were detected at levels equivalent to that of ethanol extracts. The DW extract from MAE had an IC50 value against the DPPH scavenging assay of 0.1927±0.0756 mg/ml, comparable to the test results of extracts of ethanol and 50% ethanol. The bioactive extracted using the MAE with water as solvent had minimum inhibitory concentration (MIC) and could suppress infection at 10 mg/disc. It was also observed that the extracts from the conventional extraction technique using ethanol as the solvent continued to be highly effective against Bacillus cereus even after employing the EtOH or 50% EtOH. Hom extract's MIC value representing inhibiting B. cereus was 0.625 mg/disc. Still, EtOH-extracted Hom demonstrated the highest cytotoxicity against 16HBEo- by reducing cell survival rate by less than 50% while the others did not. Interestingly, Hom that had been extracted using 50EtOH and DW with MAE had an anticancer impact on A549 by reducing the survival rate in a dose-dependent manner.

An Overview of Molecular Basis and Genetic Modification of Floral Organs Genes: Impact of Next-Generation Sequencing.

In plant development, flowering is the most widely studied process. Floral forms show large diversity in different species due to simple variations in basic architecture. To determine the floral gene expression during the past decade, MADS-box genes have identified as key regulators in both reproductive and vegetative plant development. Traditional genetics and functional genomics tools are now available to elucidate the expression and function of this complex gene family on a much larger scale. Moreover, comparative analysis of the MADS-box genes in diverse flowering and non-flowering plants, boosted by various molecular technologies such as ChIP and next-generation DNA sequencing, contributes to our understanding of how this important gene family has expanded during the evolution of land plants. Likewise, the big data analysis revealed combined activity of transcriptional regulators and floral organ identity factors regulate the flower developmental programs. Thus, with the help of cutting-edge technologies like RNA-Sequencing, sex determination is now better understood in few non-model plants Therefore, the recent advances in next-generation sequencing (NGS) should enable researchers to identify the full range of floral gene functions, which will significantly help to understand plant development and evolution. This review summarizes the floral homeotic genes in model and non-model species to understand the flower development genes and dioecy evolution.

A comprehensive review of the synthesis strategies, properties, and applications of transparent wood as a renewable and sustainable resource.

The uncertainties of the environment and the emission levels of nonrenewable resources have compelled humanity to develop sustainable energy savers and sustainable materials. One of the most abundant and versatile bio-based structural materials is wood. Wood has several promising advantages, including high toughness, low thermal conductivity, low density, high Young's modulus, biodegradability, and non-toxicity. Furthermore, while wood has many ecological and structural advantages, it does not meet optical transparency requirements. Transparent wood is ideal for use in various industries, including electronics, packaging, automotive, and construction, due to its high transparency, haze, and environmental friendliness. As a necessary consequence, current research on developing fine wood is summarized in this review. This review begins with an explanation of the history of fine wood. The concept and various synthesis strategies, such as delignification, refractive index measurement methods, and transparent lumber polymerization, are discussed. Approaches and techniques for the characterization of transparent wood are outlined, including microscopic, Fourier transform infrared (FTIR), and X-ray diffraction (XRD) analysis. Furthermore, the characterization, physical properties, mechanical properties, optical properties, and thermal conductivity of transparent wood are emphasized. Eventually, a brief overview of the various applications of fine wood is presented. The present review summarized the first necessary actions toward future transparent wood applications.

High Performance of Biohydrogen Production in Packed-Filter Bioreactor via Optimizing Packed-Filter Position.

In this present investigation, a packed-filter bioreactor was employed to produce hydrogen utilizing an expired soft drink as a substrate. The effects of feeding substrate concentrations ranging from 19.51, 10.19, 5.34, 3.48, to 2.51 g total sugar/L were examined, and the position of the packed filter installed in the bioreactor at dimensionless heights (h/H) of 1/4, 2/4, 3/4, and 4/4 was studied. The results revealed that with a substrate concentration of 20 g total sugar/L and a hydraulic retention time (HRT) of 1 h, a packed filter placed at the half-height position of the bioreactor (h/H 2/4) has the optimal hydrogen production rate, hydrogen yield, and average biomass concentration in the bioreactor, resulting in 55.70 ± 2.42 L/L/d, 0.90 ± 0.06 mol H2/mol hexose, and 17.86 ± 1.09 g VSS/L. When feeding substrate concentrations varied from 20, 10, to 5 g total sugar/L with the packed-filter position at h/H 2/4, Clostridium sp., Clostridium tyrobutyricum, and Bifidobacterium crudilactis were the predominant bacteria community. Finally, it was discovered that the packed-filter bioreactor can produce stable hydrogen in high-strength organic effluent.

Stimulation of natural enzymes for germination of mimosa weed seeds to enhanced bioethanol production.

Depleting fossil fuels target plant weeds which have the potential to be converted into efficient biofuels. In this study, mimosa seeds were utilized as a substrate for bioethanol production. This investigation was divided into three parts: breaking dormancy of seeds, mimosa seeds germination, and bioethanol production from mimosa seeds. Seed dormancy breaking was initiated by seeds soaked in hot distilled water to analyze the sugar quantity. Sugar content was measured relevance with root length results. According to results, root length obtained revealed that at 0.5-1.0 cm for root size has the most sugar availability. It was revealed that the total sugar 548.21 g/L and reducing sugar has a concentration of 248.67 g/L. Therefore, the broken dormancy of seeds using hot water at 95 °C for 10 min with a root length of 0.5-1 cm was used for ethanol fermentation. Ethanol fermentation was done by free yeast cell and immobilized yeast by injecting yeast directly. The ethanol yield was measured on the 3rd day of every fermentation. Results showed that the free cell yeast during the 1st day of fermentation afforded an ethanol production of 57.574 g/L, while the yield for immobilized yeast was 60.714 g/L. Consequently, the ethanol yield on the 2nd day of fermentation from the directly injected immobilized yeast was 60.088 g/L. Results revealed that the immobilization of yeast cells in fermentation provided a higher probability for bioethanol yield and could be utilized as a baseline for future bioethanol production. Stimulation of natural enzymes by germination of seeds for enhanced bioethanol production will be a novel approach towards next-generation biofuels.

Effects of light intensity and nutrients on the lipid content of marine microalga (diatom) Amphiprora sp. for promising biodiesel production.

In this research investigation, three microalgal species were screened (Pleurosigma sp., Amphora sp., and Amphiprora sp.) for lipid content before choosing the potential microalgae for biodiesel production. It was found that the lipid content of Amphiprora sp. was 41.48 ± 0.18%, which was higher than the Pleurosigma sp. (27.3 ± 0.8%) and Amphora sp. (22.49 ± 0.21%). The diatom microalga, Amphiprora sp. was isolated and exposed to a controlled environment. Two different media were prepared, and the main research was on the SiO2-NP medium as the cell wall of diatom was made up of silica. Essential growth parameters were studied such as dry cell weight and chlorophyll a content. The results revealed that Amphiprora sp. cultured in the modified medium showed a higher biomass yield and growth rate in all the analyses. In Soxhlet extraction method, biodiesel yield of Amphiprora sp. in modified medium under 24 µmol m-2 s-1 of light intensity was 81.47 ± 1.59% when using 2% of catalyst amount with 1.5:1 volume ratio of methanol/oil in 3 h reaction time at 65 °C. Results reveled that Amphiprora sp. diatom has a higher yield of oil 52.94 ± 0.42% and can be efficiently optimized with further studies with modified nanomaterial culture medium. The present research revealed the series of experiments on microalgal lipid transesterification and in future investigation different types of nanomaterials should be used in culture medium to identify the lipid production in microalgal cells.