Rearrangement of Hydroxylated Pinene Derivatives to Fenchone-Type Frameworks: Computational Evidence for Dynamically-Controlled Selectivity.

An acid-catalyzed Prins/semipinacol rearrangement cascade reaction of hydroxylated pinene derivatives that leads to tricyclic fenchone-type scaffolds in very high yields and diastereoselectivity has been developed. Quantum chemical analysis of the selectivity-determining step provides support for the existence of an extremely flat potential energy surface around the transition state structure. This transition state structure appears to be ambimodal, i.e., the fenchone-type tricyclic scaffolds are formed in preference to the competing formation of a bornyl (camphor-type) skeleton under dynamic control via a post-transition state bifurcation (PTSB).

Switchable Access to Different Spirocyclopentane Oxindoles by N-Heterocyclic Carbene Catalyzed Reactions of Isatin-Derived Enals and N-Sulfonyl Ketimines.

A novel NHC-catalyzed annulation protocol for the asymmetric synthesis of biologically important ß-lactam fused spirocyclopentane oxindoles with four contiguous stereocenters, including two quaternary carbon centers, was developed. Alternatively, spirocyclopentane oxindoles containing an enaminone moiety can be achieved using the same starting materials, isatin-derived enals, and N-sulfonyl ketimines, in the presence of a slightly different NHC catalytic system. This switchable annulation strategy enables the selective assembly of both heterocyclic scaffolds with good yields and excellent enantioselectivities for a broad range of substrates.

Promotion of Organic Reactions by Non-Benzenoid Carbocyclic Aromatic Ions.

The first three primary members of the non-benzenoid carbocyclic aromatic ion family, namely cyclopropenium, cyclopentadienide, and cycloheptatrienium (tropylium) ions, have planar cyclic structures with (4n+2)π electrons in fully conjugated systems. They fulfill Hückel's rule for aromaticity and hence possess extraordinary stability. Since the historic discovery of tropylium bromide in the late 19th Century, these non-benzenoid aromatic ions have attracted a lot of attention because of their unique combination of stability and reactivity. The charge on the aromatic ions makes them more prone to nucleophilic/electrophilic reactions than the neutral benzenoid counterparts. Within the last seven years, there has been a large number of investigations in utilizing aromatic ions to mediate organic reactions. This Review highlights these recent developments and discusses the potential of aromatic ions in promoting synthetically useful organic transformations.

Catalytic Conia-ene and related reactions.

Since its initial inception, the Conia-ene reaction, known as the intramolecular addition of enols to alkynes or alkenes, has experienced a tremendous development and appealing catalytic protocols have emerged. This review fathoms the underlying mechanistic principles rationalizing how substrate design, substrate activation, and the nature of the catalyst work hand in hand for the efficient synthesis of carbocycles and heterocycles at mild reaction conditions. Nowadays, Conia-ene reactions can be found as part of tandem reactions, and the road for asymmetric versions has already been paved. Based on their broad applicability, Conia-ene reactions have turned into a highly appreciated synthetic tool with impressive examples in natural product synthesis reported in recent years.

Asymmetric Synthesis of Spirobenzazepinones with Atroposelectivity and Spiro-1,2-Diazepinones by NHC-Catalyzed [3+4] Annulation Reactions.

A strategy for the NHC-catalyzed asymmetric synthesis of spirobenzazepinones, spiro-1,2-diazepinones, and spiro-1,2-oxazepinones has been developed via [3+4]-cycloaddition reactions of isatin-derived enals (3C component) with in-situ-generated aza-o-quinone methides, azoalkenes, and nitrosoalkenes (4atom components). The [3+4] annulation strategy leads to the seven-membered target spiro heterocycles bearing an oxindole moiety in high yields and excellent enantioselectivities with a wide variety of substrates. Notably, the benzazepinone synthesis is atroposelective and an all-carbon spiro stereocenter is generated.

NHC-Catalyzed Asymmetric Synthesis of Functionalized Succinimides from Enals and α-Ketoamides.

The efficient asymmetric synthesis of highly substituted succinimides from α,ß-unsaturated aldehydes and α-ketoamides via NHC-catalyzed [3+2] cycloaddition has been developed. The new scalable protocol significantly expands the utility of NHC catalysis for the synthesis of heterocycles and provides easy access to assemble a wide range of succinimides from simple starting materials.

Using individual-muscle specific instead of across-muscle mean data halves muscle simulation error.

Hill-type parameter values measured in experiments on single muscles show large across-muscle variation. Using individual-muscle specific values instead of the more standard approach of across-muscle means might therefore improve muscle model performance. We show here that using mean values increased simulation normalized RMS error in all tested motor nerve stimulation paradigms in both isotonic and isometric conditions, doubling mean simulation error from 9 to 18 (different at p < 0.0001). These data suggest muscle-specific measurement of Hill-type model parameters is necessary in work requiring highly accurate muscle model construction. Maximum muscle force (F (max)) showed large (fourfold) across-muscle variation. To test the role of F (max) in model performance we compared the errors of models using mean F (max) and muscle-specific values for the other model parameters, and models using muscle-specific F (max) values and mean values for the other model parameters. Using muscle-specific F (max) values did not improve model performance compared to using mean values for all parameters, but using muscle-specific values for all parameters but F (max) did (to an error of 14, different from muscle-specific, mean all parameters, and mean only F (max) errors at p ≤ 0.014). Significantly improving model performance thus required muscle-specific values for at least a subset of parameters other than F (max), and best performance required muscle-specific values for this subset and F (max). Detailed consideration of model performance suggested that remaining model error likely stemmed from activation of both fast and slow motor neurons in our experiments and inadequate specification of model activation dynamics.

Hill-type muscle model parameters determined from experiments on single muscles show large animal-to-animal variation.

Models built using mean data can represent only a very small percentage, or none, of the population being modeled, and produce different activity than any member of it. Overcoming this "averaging" pitfall requires measuring, in single individuals in single experiments, all of the system's defining characteristics. We have developed protocols that allow all the parameters in the curves used in typical Hill-type models (passive and active force-length, series elasticity, force-activation, force-velocity) to be determined from experiments on individual stick insect muscles (Blümel et al. 2012a). A requirement for means to not well represent the population is that the population shows large variation in its defining characteristics. We therefore used these protocols to measure extensor muscle defining parameters in multiple animals. Across-animal variability in these parameters can be very large, ranging from 1.3- to 17-fold. This large variation is consistent with earlier data in which extensor muscle responses to identical motor neuron driving showed large animal-to-animal variability (Hooper et al. 2006), and suggests accurate modeling of extensor muscles requires modeling individual-by-individual. These complete characterizations of individual muscles also allowed us to test for parameter correlations. Two parameter pairs significantly co-varied, suggesting that a simpler model could as well reproduce muscle response.

Determining all parameters necessary to build Hill-type muscle models from experiments on single muscles.

Characterizing muscle requires measuring such properties as force-length, force-activation, and force-velocity curves. These characterizations require large numbers of data points because both what type of function (e.g., linear, exponential, hyperbolic) best represents each property, and the values of the parameters in the relevant equations, need to be determined. Only a few properties are therefore generally measured in experiments on any one muscle, and complete characterizations are obtained by averaging data across a large number of muscles. Such averaging approaches can work well for muscles that are similar across individuals. However, considerable evidence indicates that large inter-individual variation exists, at least for some muscles. This variation poses difficulties for across-animal averaging approaches. Methods to fully describe all muscle's characteristics in experiments on individual muscles would therefore be useful. Prior work in stick insect extensor muscle has identified what functions describe each of this muscle's properties and shown that these equations apply across animals. Characterizing these muscles on an individual-by-individual basis therefore requires determining only the values of the parameters in these equations, not equation form. We present here techniques that allow determining all these parameter values in experiments on single muscles. This technique will allow us to compare parameter variation across individuals and to model muscles individually. Similar experiments can likely be performed on single muscles in other systems. This approach may thus provide a widely applicable method for characterizing and modeling muscles from single experiments.

Neural control of unloaded leg posture and of leg swing in stick insect, cockroach, and mouse differs from that in larger animals.

Stick insect (Carausius morosus) leg muscles contract and relax slowly. Control of stick insect leg posture and movement could therefore differ from that in animals with faster muscles. Consistent with this possibility, stick insect legs maintained constant posture without leg motor nerve activity when the animals were rotated in air. That unloaded leg posture was an intrinsic property of the legs was confirmed by showing that isolated legs had constant, gravity-independent postures. Muscle ablation experiments, experiments showing that leg muscle passive forces were large compared with gravitational forces, and experiments showing that, at the rest postures, agonist and antagonist muscles generated equal forces indicated that these postures depended in part on leg muscles. Leg muscle recordings showed that stick insect swing motor neurons fired throughout the entirety of swing. To test whether these results were specific to stick insect, we repeated some of these experiments in cockroach (Periplaneta americana) and mouse. Isolated cockroach legs also had gravity-independent rest positions and mouse swing motor neurons also fired throughout the entirety of swing. These data differ from those in human and horse but not cat. These size-dependent variations in whether legs have constant, gravity-independent postures, in whether swing motor neurons fire throughout the entirety of swing, and calculations of how quickly passive muscle force would slow limb movement as limb size varies suggest that these differences may be caused by scaling. Limb size may thus be as great a determinant as phylogenetic position of unloaded limb motor control strategy.

N-Heterocyclic olefins as efficient phase-transfer catalysts for base-promoted alkylation reactions.

N-Heterocyclic olefins (NHOs) have very recently emerged as efficient promoters for several chemical reactions due to their strong Brønsted/Lewis basicities. Here we report the novel application of NHOs as efficient phase-transfer organocatalysts for synthetically important alkylation reactions on a wide range of substrates, further demonstrating the great potential of NHOs in organic chemistry.

Development and Applications of Transesterification Reactions Catalyzed by N-Heterocyclic Olefins.

A novel method to utilize N-heterocyclic olefins (NHOs), the alkylidene derivatives of N-heterocycic carbenes, as organocatalysts to promote transesterification reactions has been developed. Because of their strong Brønsted/Lewis basicity, NHOs can enhance the nucleophilicity of alcohols for their acylation reactions with carboxylic esters. This transformation can be employed in industrially relevant processes such as the production of biodiesel, the depolymerization of polyethylene terephthalate (PET) from plastic bottles for recycling purposes, and the ring-opening polymerization of cyclic esters to form biodegradable polymers such as polylactide (PLA) and polycaprolactone (PCL).

Asymmetric synthesis of tetrahydropyridines via an organocatalytic one-pot multicomponent Michael/aza-Henry/cyclization triple domino reaction.

A low loading of a quinine-derived squaramide efficiently catalyzes the triple-domino Michael/aza-Henry/cyclization reaction between 1,3-dicarbonyl compounds, ß-nitroolefins, and aldimines to provide tetrahydropyridines bearing three contiguous stereogenic centers in good yields, excellent enantiomeric excesses, and up to high diastereomeric ratios.

Dynamic simulation of insect walking.

Insect walking relies on a complex interaction between the environment, body segments, muscles and the nervous system. For the stick insect in particular, previous investigations have highlighted the role of specific sensory signals in the timing of activity of central neural networks driving the individual leg joints. The objective of the current study was to relate specific sensory and neuronal mechanisms, known from experiments on reduced preparations, to the generation of the natural sequence of events forming the step cycle in a single leg. We have done this by simulating a dynamic 3D-biomechanical model of the stick insect coupled to a reduced model of the neural control system, incorporating only the mechanisms under study. The neural system sends muscle activation levels to the biomechanical system, which in turn provides correctly timed propriosensory signals back to the neural model. The first simulations were designed to test if the currently known mechanisms would be sufficient to explain the coordinated activation of the different leg muscles in the middle leg. Two experimental situations were mimicked: restricted stepping where only the coxa-trochanteral joint and the femur-tibia joint were free to move, and the unrestricted single leg movements on a friction-free surface. The first of these experimental situations is in fact similar to the preparation used in gathering much of the detailed knowledge on sensory and neuronal mechanisms. The simulations show that the mechanisms included can indeed account for the entire step cycle in both situations. The second aim was to test to what extent the same sensory and neuronal mechanisms would be adequate also for controlling the front and hind legs, despite the large differences in both leg morphology and kinematic patterns. The simulations show that front leg stepping can be generated by basically the same mechanisms while the hind leg control requires some reorganization. The simulations suggest that the influence from the femoral chordotonal organs on the network controlling levation-depression may have a reversed effect in the hind legs as compared to the middle and front legs. This, and other predictions from the model will have to be confirmed by additional experiments.