RESUMO
Accurate knowledge of transport properties of Li-insertion materials in application-relevant temperature ranges is of crucial importance for the targeted optimization of Li-ion batteries (LIBs). Galvanostatic intermittent titration technique (GITT) is a widely applied method to determine Li-ion diffusion coefficients of electrode materials. The well-known calculation formulas based on Weppner's and Huggins' approach, imply a square-root time dependence of the potential during a GITT pulse. Charging the electrochemical double layer capacitance at the beginning of a GITT pulse usually takes less than one second. However, at lower temperatures down to -40 °C, the double layer charging time strongly increases due to an increase of the charge transfer resistance. The charging time can become comparable with the pulse duration, impeding the conventional GITT diffusion analysis. We propose a model to describe the potential change during a galvanostatic current pulse, which includes an initial, relatively long-lasting double layer charging, and analyze the accuracy of the lithium diffusion coefficient, derived by using the Weppner-Huggins method within a suitably chosen time interval of the pulse. Effects leading to an inaccurate determination of the diffusion coefficient are discussed and suggestions to improve GITT analyses at low temperature are derived.
RESUMO
Understanding the molecular interactions between inorganic phases such as silica and organic material is fundamental for chromatographic applications, for tailoring silica-enzyme interactions, and for elucidating the mechanisms of biomineralization. The formation, structure, and properties of the organic/inorganic interface is crucial in this context. Here, we investigate the interaction of selectively 13C-labeled choline with 29Si-labeled monosilicic acid/silica at the molecular level. Silica/choline nanocomposites were analyzed by solid-state NMR spectroscopy in combination with extended molecular dynamics (MD) simulations to understand the silica/organic interface. Cross-polarization magic angle spinning (CP MAS)-based NMR experiments like 1H-13C CP-REDOR (rotational-echo double resonance), 1H-13C HETCOR (heteronuclear correlation), and 1H-29Si-1H double CP are employed to determine spatial parameters. The measurement of 29Si-13C internuclear distances for selectively 13C-labeled choline provides an experimental parameter that allows the direct verification of MD simulations. Atomistic modeling using classical MD methodologies is performed using the INTERFACE force field. The modeling results are in excellent agreement with the experimental data and reveal the relevant molecular conformations as well as the nature and interplay of the interactions between the choline cation and the silica surface. Electrostatic interactions and hydrogen bonding are both important and depend strongly on the hydration level as well as the charge state of the silica surface.
RESUMO
Here we present electrochemically grown ultrathin platinum nanowires and demonstrate that their morphology and crystalline structure can be tuned by the waveform of the alternating voltage applied to the microelectrodes. The structure of the nanowires was analyzed by scanning and transmission electron microscopy. The voltage signal, applied to grow the nanowires, consisted of several Fourier components of a square-shaped wave. We observed that, depending on the number of Fourier components, the morphology of the nanowires changed from branched dendritic-like patterns to straight wires and the wire crystallinity changed from polycrystalline to highly oriented growth with the [111] direction of platinum crystallites along the nanowire axis. We propose a simple model to explain this intriguing observation.
Assuntos
Eletroquímica/métodos , Nanotecnologia/métodos , Nanofios/química , Platina/químicaRESUMO
The force balance between the extracellular microenvironment and the intracellular cytoskeleton controls the cell fate. We report a new (to our knowledge) mechanism of receptor force control in cell adhesion originating from friction between cell adhesion ligands and the supporting substrate. Adherent human endothelial cells have been studied experimentally on polymer substrates noncovalently coated with fluorescent-labeled fibronectin (FN). The cellular traction force correlated with the mobility of FN during cell-driven FN fibrillogenesis. The experimental findings have been explained within a mechanistic two-dimensional model of the load transfer at focal adhesion sites. Myosin motor activity in conjunction with sliding of FN ligands noncovalently coupled to the surface of the polymer substrates is shown to result in a controlled traction force of adherent cells. We conclude that the friction of adhesion ligands on the supporting substrate is important for mechanotransduction and cell development of adherent cells in vitro and in vivo.
Assuntos
Fricção , Modelos Biológicos , Adesão Celular , Fenômenos Químicos , Difusão , Matriz Extracelular/metabolismo , Adesões Focais/metabolismo , Células Endoteliais da Veia Umbilical Humana/citologia , Humanos , LigantesRESUMO
Based on experimental studies on tube formation during self-assembly of bacterial surface (S)-layers, a mechanistic model for describing the underlying basic mechanisms is proposed and the effect of process parameters on growth velocity and tube radius is investigated. The S-layer is modeled as a curved sheet with discrete binding sites for the association of monomers distributed along the S-layer edges. Reported changes of the tube radius owing to genetic protein modifications are explained within the framework of continuum mechanics. S-layer growth velocity and shape development are analyzed by Monte Carlo simulation in their dependence on the attachment and detachment frequencies of monomers at the S-layer. For curved S-layer patches, a criterion for the formation of S-layer tubes is derived. Accordingly, tubes can form only within a certain range of the initial monomer concentration. Furthermore, the effect of calcium ion concentration on tube formation is discussed, including recent experimental findings on the calcium effect.
Assuntos
Bacillus/metabolismo , Materiais Biocompatíveis/metabolismo , Geobacillus stearothermophilus/metabolismo , Glicoproteínas de Membrana/metabolismo , Nanotecnologia/métodos , Bacillus/química , Materiais Biocompatíveis/química , Cálcio/metabolismo , Simulação por Computador , Geobacillus stearothermophilus/química , Concentração de Íons de Hidrogênio , Glicoproteínas de Membrana/química , Glicoproteínas de Membrana/ultraestrutura , Microscopia Eletrônica de Varredura , Método de Monte Carlo , TermodinâmicaRESUMO
The degradation mechanism of human trabecular bone harvested from the central part of the femoral head of a patient with a fragility fracture of the femoral neck under conditions of senile osteoporosis was investigated by high-resolution electron microscopy. As evidenced by light microscopy, there is a disturbance of bone metabolism leading to severe and irreparable damages to the bone structure. These defects are evoked by osteoclasts and thus podosome activity. Podosomes create typical pit marks and holes of about 300-400 nm in diameter on the bone surface. Detailed analysis of the stress field caused by the podosomes in the extracellular bone matrix was performed. The calculations yielded maximum stress in the range of few megapascals resulting in formation of microcracks around the podosomes. Disintegration of hydroxyapatite and free lying collagen fibrils were observed at the edges of the plywood structure of the bone lamella. At the ultimate state, the disintegration of the mineralized collagen fibrils to a gelatinous matrix comes along with a delamination of the apatite nanoplatelets resulting in a brittle, porous bone structure. The nanoplatelets aggregate to big hydroxyapatite plates with a size of up to 10 x 20 µm2. The enhanced plate growth can be explained by the interaction of two mechanisms in the ruffled border zone: the accumulation of delaminated hydroxyapatite nanoplatelets near clusters of podosomes and the accelerated nucleation and random growth of HAP nanoplatelets due to a nonsufficient concentration of process-directing carboxylated osteocalcin cOC.
Assuntos
Osteoporose , Podossomos , Apatitas , Osso e Ossos/diagnóstico por imagem , Humanos , OsteoclastosRESUMO
For assessing mechanical properties of osteoporotic bone, biomechanical testing combined with in silico modeling plays a key role. The present study focuses on microscopic mechanical bone properties in a rat model of postmenopausal osteoporosis. Female Sprague-Dawley rats were (1) euthanized without prior interventions, (2) sham-operated, and (3) subjected to ovariectomy combined with a multi-deficiencies diet. Rat vertebrae (corpora vertebrae) were imaged by micro-CT, their stiffness was determined by compression tests, and load-induced stress states as well as property changes due to the treatment were analyzed by finite-element modeling. By comparing vertebra stiffness measurements with finite-element calculations of stiffness, an overall microscopic Young's modulus of the bone was determined. Macroscopic vertebra stiffness as well as the microscopic modulus diminish with progression of osteoporosis by about 70 %. After strong initial changes of bone morphology, further decrease in macroscopic stiffness is largely due to decreasing microscopic Young's modulus. The micromechanical stress calculations reveal particularly loaded vertebra regions prone to failure. Osteoporosis-induced changes of the microscopic Young's modulus alter the fracture behavior of bone, may influence bone remodeling, and should be considered in the design of implant materials.
Assuntos
Fenômenos Biomecânicos/fisiologia , Osteoporose/fisiopatologia , Coluna Vertebral/fisiopatologia , Animais , Força Compressiva , Módulo de Elasticidade , Feminino , Análise de Elementos Finitos , Osteoporose/diagnóstico por imagem , Ovariectomia , Radiografia , Ratos , Ratos Sprague-Dawley , Coluna Vertebral/diagnóstico por imagemRESUMO
Formation of fibrillar fibronectin networks is a major process during embryogenesis and tissue formation, but the molecular details of fibril assembly remain poorly understood. Based on current ideas of fibronectin fibrillogenesis, a stochastic model was developed to enlighten the mechanism of the formation of paired fibronectin nanofibrils by adherent endothelial cells, which has been observed recently. The development of fibronectin clusters and fibrils was investigated by means of Monte Carlo simulations, including diffusion-controlled aggregation and myosin-driven transport of fibronectin-integrin complexes in the vicinity of a focal adhesion. Different evolving growth patterns were summarized in a morphological diagram as a function of the fibronectin substrate and fibronectin-fibronectin interaction energies. The formation of paired nanofibrils was found to occur in a certain region of interaction parameters. Beyond this region branched fibronectin clusters as well as tear-off of fibronectin fibrils were observed.