Biological activity and development of functional foods fortified with okra (Abelmoschus esculentus).

The Abelmoschus esculentus plant, better known as okra, is an interesting crop from a nutritional standpoint. The okra plant is native to the African region but can now be found throughout tropical and subtropical areas of the world. This plant, known for its healing abilities, has been used as a traditional medicine to treat several diseases and external ailments, such as wounds or boils. This article reviews the potential health benefits from okra consumption, as well as the bioactive compounds that are suggested to be responsible. Furthermore, the okra plant and its derivatives have been evaluated in the formulation and manufacture of new functional food products. The latest advances in this direction, which includes characterizing the technical properties of functional foods fortified with okra are also presented in this review. A series of bioactive compounds such as flavonoids and catechins have been found in the okra plant, which were associated with numerous biological properties observed in research studies that reported potential anti-diabetic, anti-cancer, anti-hypertensive, and antimicrobial effects, among others, as a result of their consumption. These potential health benefits contribute to the development of new and useful functional foods, with okra (or its derivatives) being used as the highlighted ingredient.

Improving oxidative stability of foods with apple-derived polyphenols.

Consumers demand healthy and natural food products. Thus, naturally derived antioxidants are emerging as a promising alternative to the use of present ingredients. Apples and apple derivative products (e.g., apple juice, apple cider, apple sauce, and others) are widely consumed throughout the world for a variety of different reasons and supply a large quantity of polyphenolic compounds. The extraction of polyphenolic compounds from apples and their incorporation into processed foods as naturally sourced ingredients could be a preferred alternative to commonly used commercial antioxidants that are used in many foods. In addition, they could have a positive impact on the environment and on the economy due to the utilization of byproducts generated during processing of apples, like apple pomace. In terms of the extraction procedures for the antioxidant compounds found in apples, the most efficient processes are methods that use ultrasound as the extraction tool. With this technique, greater yields are achieved, and less extraction time is required when compared with other, more conventional, extraction methods. However, parameters such as the extraction solvent, temperature during extraction, and extraction time must be suitably optimized in order to obtain the best performance and the highest antioxidant capacity. From an application standpoint, the use of apple-derived polyphenol extracts as a naturally derived food additive has documented applications for bread, meat, fish, cookies, and juices and there is evidence of increased antioxidant capacity, reduced rate of lipid oxidation, and increased storage time without compromising on sensory properties.

Recent Discoveries in the Field of Lipid Bio-Based Ingredients for Meat Processing.

Current culture and pace of lifestyle, together with consumer demand for ready-to-eat foods, has influenced the food industry, particularly the meat sector. However, due to the important role that diet plays in human health, consumers demand safe and healthy food products. As a consequence, even foods that meet expectations for convenience and organoleptic properties must also meet expectations from a nutritional standpoint. One of the main nutritionally negative aspects of meat products is the content and composition of fat. In this sense, the meat industry has spent decades researching the best strategies for the reformulation of traditional products, without having a negative impact in technological processes or in the sensory acceptance of the final product. However, the enormous variety of meat products as well as industrial and culinary processes means that a single strategy cannot be established, despite the large volume of work carried out in this regard. Therefore, taking all the components of this complex situation into account and utilizing the large amount of scientific information that is available, this review aims to comprehensively analyze recent advances in the use of lipid bio-based materials to reformulate meat products, as well as their nutritional, technological, and sensorial implications.

Review: Amino acid concentration of high protein food products and an overview of the current methods used to determine protein quality.

Quality of the dietary protein in foods rather than amount of dietary protein may be of greater importance from a human health and wellness standpoint. Various systems are in place to determine the value of dietary protein. Protein digestibility-corrected amino acid score (PDCAAS) and digestible indispensable amino acid score (DIAAS) are the two major protein standards used to determine the completeness of proteins by their unique concentration and digestibility of indispensable amino acids. The purpose of this review was to provide a comprehensive comparison of the amino acid concentration of high protein foods and provide the current status of the use and practicality of the PDCAAS and DIAAS system. This review builds upon previous research analyzing the total nutrient density of protein-rich foods and expands scientific research investigating the quality of proteins. In summary, the average sum of indispensable amino acids for meat and fish products is much more consistent than that of non-meat and plant-based food products. However, some non-meat products have relatively similar amounts of indispensable amino acids on a similar serving size basis. The overwhelming aspect of determining protein quality is that greater research is needed to determine protein digestibility of food products.

Evaluation of Improvest effects on production parameters of gilts from two different genetic sire lines.

The objective was to evaluate the effects of Improvest on the performance and carcass characteristics of gilts from two different genetic sire lines and the performance of Improvest gilts with castrated male pigs. It was hypothesized that performance parameters observed for Improvest gilts would be similar to barrows, thus narrowing the performance gaps between traditionally managed gilts and barrows. Pigs were from Large White/Landrace dams and either Duroc-Pietrain (DP) or Duroc (D) sires. Females within each genetic sire line were randomized by weight to receive the first dose of Improvest (IMP) on day 25 of the study or to serve as a nontreated control (DP IMP gilt (n = 6 pens; 19 pigs/pen), D IMP gilt (n = 6 pens; 19 pigs/pen), DP CON gilt (n = 6 pens; 19 pigs/pen), D CON gilt (n = 6 pens; 19 pigs/pen). The second dose of Improvest was administered 6 wk later (i.e., day 67). Barrows did not receive Improvest (DP barrow [n = 10 pens; 19 to 20 pigs/pen], D barrow [n = 10 pens; 19 to 20 pigs/pen]). Average daily gain (ADG), average daily feed intake (ADFI), and gain-to-feed ratio (G:F) were measured at 21 d intervals throughout the duration of the study. The targeted weight for pigs to be marketed was 133 ±â€…2.5 kg. Carcass characteristics and loin quality parameters were evaluated on a subset of pigs (n = 283). Improvest-treated gilts of both genetic lines had increased (P ≤ 0.05) ADG and ADFI compared to untreated gilts during the post-second dose intervals with values exceeding that of barrows from day 84 to marketing. Overall, DP IMP gilts had increased (P ≤ 0.05) G:F post-second dose compared to DP CON gilts and DP barrows, yet all other treatments were similar. As pigs were marketed at a similar weight, there was no difference in the final weight, however, DP IMP gilts and DP barrows reached market weight sooner (P ≤ 0.05) than DP CON gilts (109.9 and 111.8 vs. 114.3 ±â€…0.8 d). Backfat and loin weight were greater (P < 0.01) in IMP gilts versus CON gilts, while IMP gilts and barrows had similar values within each respective genetic sire line. There were no differences between treatments (P ≥ 0.08) for pH and instrumental color of the loins. When the pass rate of loins (Japanese color score ≥ 3.0 and marbling ≥ 2.0) was evaluated, IMP gilts were at intermediate values between CON gilts and barrows for each respective genetic sire line. Overall, Improvest within a genetic line improved gilt carcass measurements so that they were more similar to barrows.

The effects of dietary net energy on grow-finish performance and carcass characteristics of market gilts managed with immunological suppression of ovarian function and estrus (Improvest).

The objective was to determine the effects of net energy (NE) during the grow-finish period on live performance and carcass characteristics of market gilts managed with immunological suppression of ovarian function and estrus (Improvest®; IMP) compared with market gilts not managed with Improvest (CON). The 104-d study began when 1,008 gilts (11 wk old; average starting weight of 30.8 kg) were allocated by weight to 48 pens with 21 gilts/pen. Half of the pens were randomly selected to be managed with Improvest while the other half of the pens were not managed with Improvest. Three dietary programs differing in their NE were formulated over five dietary phases (according to standardized ileal digestible lysine requirements) to provide an average of 2,218 kcal/kg (low NE), 2,343 kcal/kg (medium NE), or 2,468 kcal/kg (high NE). The experiment was designed as a 2 × 3 factorial with main effects of Improvest management and NE. For the overall study period, there were no significant interactions (P ≥ 0.20) for average daily feed intake (ADFI), average daily gain (ADG), or Gain:Feed (G:F). There were also no significant interactions between Improvest management and NE (P ≥ 0.30) for carcass characteristics. However, IMP gilts consumed more feed (6.8% greater ADFI; P < 0.01), grew faster (5.0% greater ADG; P < 0.01), were less efficient (1.8% lower G:F; P < 0.01), heavier (3.5 kg hot carcass weight; P < 0.01), and fatter (1.9 mm greater backfat thickness and 1.26% less predicted lean carcass yield; P < 0.01). No difference (P = 0.21) in carcass dressing percentage between IMP and CON gilts was reported. For the overall study period, gilts fed low NE and medium NE diets consumed more feed compared with gilts fed high NE diets (6.8% more ADFI for low NE and 5.7% more for medium NE; P < 0.01), and gilts fed low NE diets grew 2.5% slower (P < 0.01) than gilts fed medium NE diets, while gilts fed high NE diets were intermediate and not different from the other NE treatments. This resulted in gilts fed Low NE diets being the least efficient (3.8% lower G:F than medium NE and 7.1% lower G:F than High NE; P < 0.01). Overall, these data indicate that typical Improvest response levels were sustained at each of the NE treatments evaluated in this study as there were no significant interactions for Improvest management and NE; however, consideration should still be provided to the known production impacts of low NE diets.

The effects of dietary net energy on grow-finish performance and carcass characteristics of male market pigs managed with immunological castration (Improvest).

The objective was to determine the effects of dietary net energy (NE) during the grow-finish period on live performance and carcass characteristics of intact male pigs managed with immunological castration (Improvest) compared with physically castrated (PC) male pigs. The 101-d study began when 1,008 pigs (504 intact male pigs and 504 PC male pigs; 10 wk old) were allocated by weight to 48 pens with 21 intact males or 21 PC males per pen. Three dietary NE treatments were fed to pigs using five dietary phases (dietary programs were formulated according to standardized ileal digestible lysine requirements of Improvest males or PC males) to provide an average of 2,212 kcal/kg (low NE), 2,337 kcal/kg (medium NE), or 2,462 kcal/kg (high NE). The experiment was designed and analyzed as a 2 × 3 factorial with main effects of Improvest management and NE. For the overall study period, there were no significant interactions between Improvest management and NE (P ≥ 0.19) for average daily feed intake (ADFI), average daily gain (ADG), or gain:feed (G:F). There were also no significant interactions between Improvest management and NE (P ≥ 0.06) for carcass characteristics. Improvest males consumed less feed (5.3% lower ADFI; P < 0.01), grew faster (5.1% greater ADG; P < 0.01), and were more efficient (11.2% greater G:F; P < 0.01) compared with PC males. Hot carcass weight (HCW) did not differ (P = 0.16) between Improvest males and PC males (attributed to 1.6 percentage unit lower dressing percentage for Improvest males; P < 0.01); however, Improvest males were leaner (0.9 mm less backfat and 0.65% greater predicted lean yield; P < 0.01) compared with PC males. For the overall study period, pigs fed low NE and medium NE diets consumed 7.5% and 4.6% more feed (P < 0.01) than pigs fed high NE diets, respectively, and pigs fed low NE diets grew 1.7% slower (P < 0.02) than pigs fed medium NE and high NE diets. This resulted in pigs fed low NE diets having 4.4% lower G:F compared with pigs fed medium NE and 8.6% lower G:F compared with pigs fed high NE diets (P < 0.01). Pigs fed low NE had 3.0 kg lighter (P < 0.01) HCW compared with medium NE, while high NE had intermediate HCW that did not differ from the other two treatments. Overall, typical Improvest response levels for live performance and carcass characteristics when compared with PC males were achieved for each of the NE treatments evaluated in this study.

Do carcass traits influence consumer perception of pork eating quality?

The objective of this study was to assess carcass traits' influence on pork eating quality as evaluated by consumers. A total of 1360 pork chops were used, with 824 from the sirloin end and 536 from the butt end of the loin (Longissimuss thoracis et lumborum), to produce 340 packages, each containing four pork chops. Untrained participants received one package of either sirloin or butt chops, being two pork chops from barrows and two from gilts. Participants answered a survey rating the tenderness, juiciness, flavour, and overall acceptability of each chop on an 8-point scale. Correlation analysis was conducted between carcass traits and pork eating quality attributes. For the descriptive analysis, classes (low, medium, and high) for carcass traits, Warner-Bratzler shear force (WBSF) and cooking loss were created based on our consumer responses dataset for palatability attributes. No significant correlations (P > 0.05) were observed between carcass traits and pork eating quality traits. Tenderness and overall acceptability were negatively correlated (P < 0.05) with cooking loss and WBSF. Loin intramuscular fat (IMF) content showed a weak negative correlation (P < 0.05) with WBSF and cooking loss. Consumers rated chops from the high and medium/high backfat thickness and loin IMF classes slightly higher for tenderness and juiciness, respectively. Additionally, chops from the low and/or medium WBSF and cooking loss classes received slightly higher scores for tenderness and juiciness than pork chops in the high classes. In conclusion, the study indicated that carcass traits had minimal impact on overall acceptability of pork by consumers.

National Beef Quality Audit-2022: Transportation, mobility, live cattle, and hide assessments to determine producer-related defects that affect animal welfare and the value of market cows and bulls at processing facilities.

The National Beef Quality Audit (NBQA)-2022 serves as a benchmark of the current market cow and bull sectors of the U.S. beef industry and allows comparison to previous audits as a method of monitoring industry progress. From September 2021 through May 2022, livestock trailers (n = 125), live animals (n = 5,430), and post-slaughter hide-on animals (n = 6,674) were surveyed at 20 commercial beef processing facilities across the U.S. Cattle were transported in a variety of trailer types for an average distance of 490.6 km and a mean transport time of 6.3 h. During transit, cattle averaged 2.3 m2 of trailer space per animal indicating sufficient space was provided according to industry guidelines. Of all trailers surveyed, 55.3% transported cattle from an auction barn to a processing facility. When surveyed, 63.6% of all truck drivers reported to be Beef Quality Assurance certified. The majority (77.0%) of cattle were sound when evaluated for mobility. Mean body condition scores (9-point scale) for beef cows and bulls were 3.8 and 4.4, respectively, whereas mean body condition scores (5-point scale) for dairy cows and bulls were 2.3 and 2.6, respectively. Of the cattle surveyed, 45.1% had no visible live animal defects, and 37.9% had only a single defect. Of defects present in cows, 64.6% were attributed to an udder problem. Full udders were observed in 47.5% of all cows. Nearly all cattle were free of visible abscesses and knots (97.9% and 98.2%, respectively). No horns were observed in 89.4% of all cattle surveyed. Beef cattle were predominantly black-hided (68.9% and 67.4% of cows and bulls, respectively). Holstein was the predominant dairy animal observed and accounted for 85.7% of the cows and 98.0% of the bulls. Only 3.1% of all animals had no form of identification. Findings from the NBQA-2022 show improvements within the industry and identify areas that require continued education and research to improve market cow and bull welfare and beef quality.

The effects of feeding benzoic acid and/or active dry yeast (Saccharomyces cerevisiae) on fatty acid composition, sensory attributes, and retail shelf-life of beef longissimus thoracis.

Fifty-nine Angus-cross steers (492 ± SD 36 kg) were arranged in a randomized complete block design and assigned to the following dietary treatments for the final 106 days of the finishing phase: no supplementation (CON), 0.5% benzoic acid (ACD), 3 g/steer/d active dry Saccharomyces cerevisiae (YST), or both [0.5% benzoic acid and 3 g/steer/d S. cerevisiae (AY)]. Steers were slaughtered at a commercial facility where longissimus thoracis (IMPS #107 Beef Rib) samples were retrieved and evaluated for fatty acid composition, sensory attributes, and shelf-life during a simulated retail display period. Data (N = 57) were analyzed using dietary treatment as a fixed effect, blocking weight at the beginning of the study as a random effect, and steer as the experimental unit. Muscle pH and proximate composition (moisture and intramuscular lipid) for longissimus samples were not different (P ≥ 0.39) among dietary treatments. Most fatty acid profile values and calculations were not different among dietary treatments (P ≥ 0.10); however, the n-6:n-3 ratio differed (P = 0.01), with ACD samples having lower n-6:n-3 compared with CON and YST samples while AY samples were intermediate and not different from other dietary treatments. The trained sensory panel did not detect differences among dietary treatments (P ≥ 0.23) for juiciness, beef flavor intensity, or off-flavor intensity; however, they did score AY samples as chewier than ACD samples with CON and YST samples intermediate and not different from other dietary treatments. Yet, tenderness was not different when scored by trained panelists (P = 0.10) or measured instrumentally (P = 0.21). Total color change tended to differ (P = 0.09) during the 12-d simulated retail display period with AY samples experiencing less color change compared with YST samples, while CON and ACD samples were intermediate and not different from other dietary treatments. Lipid oxidation (as measured with TBARS) tended to differ (P = 0.08) following the 12-d simulated retail display period with ACD and AY samples experiencing lower levels of oxidation compared with CON, while YST samples were intermediate and not different from other dietary treatments. Overall, these results suggest there were no negative impacts on meat quality when finishing steers were supplemented with either benzoic acid or S. cerevisiae, and there may even be advantages for fatty acid composition and oxidative stability when steers were supplemented with benzoic acid.

Phosphate alternatives for meat processing and challenges for the industry: A critical review.

Meat and meat products provide high levels of nutrition and many health benefits to consumers, yet a controversy exists regarding the use of non-meat additives, such as the inorganic phosphates that are commonly used in meat processing, and particularly their relationship to cardiovascular health and kidney complications. Inorganic phosphates are salts of phosphoric acid (e.g., sodium phosphate, potassium phosphate, or calcium phosphate), whereas organic phosphates are ester compounds (e.g., the phospholipids found in cell membranes). In this sense, the meat industry remains active in its efforts to improve formulations for processed meat products with the use of natural ingredients. Despite efforts to improve formulations, many processed meat products still contain inorganic phosphates, which are used for their technological contributions to meat chemistry including improvements in water-holding capacity and protein solubilization. This review provides a thorough evaluation of phosphate substitutes in meat formulations and other processing technologies that can help eliminate phosphates from the formulations of processed meat products. In general, several ingredients have been evaluated as replacements for inorganic phosphates with varying degrees of success such as plant-based ingredients (e.g., starches, fibers, or seeds), fungi ingredients (e.g., mushrooms and mushroom extracts), algae ingredients, animal-based ingredients (e.g., meat/seafood, dairy, or egg materials), and inorganic compounds (i.e., minerals). Although these ingredients have shown some favorable effects in certain meat products, none have exactly matched the many functions of inorganic phosphates, so the support of extrinsic technologies, such as tumbling, ultrasound, high-pressure processing (HPP), and pulsed electric field (PEF), may be necessary to achieve similar physiochemical properties as conventional products. The meat industry should continue to investigate ways to scientifically innovate the formulations of, and the technologies used in, processed meat products while also listening to (and acting upon) the feedback from consumers.

Comparison of an advanced automated ultrasonic scanner (AutoFom III) and a handheld optical probe (Destron PG-100) to determine lean yield in pork carcasses.

This study compared the accuracy of two methods for predicting carcass leanness (i.e., predicted lean yield) with fat-free lean yields obtained by manual carcass side cut-out and dissection of lean, fat, and bone components. The two prediction methods evaluated in this study estimated lean yield by measuring fat thickness and muscle depth at one location with an optical grading probe (Destron PG-100) or by scanning the entire carcass with advanced ultrasound technology (AutoFom III). Pork carcasses (166 barrows and 171 gilts; head-on hot carcass weights (HCWs) ranging from 89.4 to 138.0 kg) were selected based on their fit within desired HCW ranges, their fit within specific backfat thickness ranges, and sex (barrow or gilt). Data (n = 337 carcasses) were analyzed using a 3 × 2 factorial arrangement in a randomized complete block design including the fixed effects of the method for predicting lean yield, sex, and their interaction, and random effects of producer (i.e., farm) and slaughter date. Linear regression analysis was then used to examine the accuracy of the Destron PG-100 and AutoFom III data for measuring backfat thickness, muscle depth, and predicted lean yield when compared with fat-free lean yields obtained with manual carcass side cut-outs and dissections. Partial least squares regression analysis was used to predict the measured traits from image parameters generated by the AutoFom III software. There were method differences (P < 0.01) for determining muscle depth and lean yield with no method differences (P = 0.27) for measuring backfat thickness. Both optical probe and ultrasound technologies strongly predicted backfat thickness (R2 ≥ 0.81) and lean yield (R2 ≥ 0.66), but poorly predicted muscle depth (R2 ≤ 0.33). The AutoFom III improved accuracy [R2 = 0.77, root mean square error (RMSE) = 1.82] for the determination of predicted lean yield vs. the Destron PG-100 (R2 = 0.66, RMSE = 2.22). The AutoFom III was also used to predict bone-in/boneless primal weights, which is not possible with the Destron PG-100. The cross-validated prediction accuracy for the prediction of primal weights ranged from 0.71 to 0.84 for bone-in cuts and 0.59 to 0.82 for boneless cut lean yield. The AutoFom III was moderately (r ≤ 0.67) accurate for the determination of predicted lean yield in the picnic, belly, and ham primal cuts and highly (r ≥ 0.68) accurate for the determination of predicted lean yield in the whole shoulder, butt, and loin primal cuts.

Pork grading is a producer-feedback system that provides carcass trait information (i.e., carcass weight, fat/lean deposition) to determine the economic value of carcasses. Packing plants generally emphasize the optimization of carcass weight and leanness by providing premium or discounted prices using a grid system. Packing plants routinely collect carcass weights while carcass leanness can be more challenging to capture. Since the packing industry does not measure fat/lean deposition for each carcass or each meat cut within the carcass, various technologies are used to predict carcass leanness. These include optical probes, spectral imaging, artificial vision, and others that have been around for decades. A challenge with these technologies is that they often collect measurements at only one location on the carcass, providing information that is not necessarily representative of the entire carcass. The purpose of this study was to compare the accuracy of an advanced automated ultrasonic scanner (AutoFom III) that scans the entire carcass with that of a handheld optical probe (Destron PG-100) that collects measurements from one location on the carcass. In summary, the AutoFom III improved accuracy for determining lean yield with the additional advantage of predicting primal weights when compared with the Destron PG-100.

A comparison of carcass characteristics, carcass cutting yields, and meat quality of barrows and gilts.

Objectives of this research were to compare carcass characteristics, carcass cutting yields, and meat quality for market barrows and market gilts. Commercially-sourced carcasses from 168 market barrows and 175 market gilts weighing an average of 107.44 ± 7.37 kg were selected from 17 different slaughter groups representing approximately 3,950 carcasses. Each group was sorted into percentiles based on hot carcass weight with an equal number of barrows and gilts selected from each quartile so that weight minimally confounded parameters of interest. Carcass lean yield was determined for carcasses following fabrication (i.e. dissection of lean, fat, and bone tissue components) and meat quality measurements were evaluated at the time of fabrication (24 to 72 h postmortem) and following 14-d of postmortem storage. Data were analyzed as a randomized complete block design with carcass serving as the experimental unit, sex (barrow or gilt), the three hot carcass weight quantiles (light [<104 kg]; average [104 to 110 kg]; heavy [>110 kg]), and the interaction between sex and hot carcass weight quantile serving as fixed effects, and producer nested within slaughter event serving as a random effect. Results from the study demonstrated that gilt carcasses were leaner (3 mm less backfat thickness; 3.5 cm2 greater loin muscle area, 1.52% greater merchandized-cut yield, and 2.92% greater dissected carcass lean yield; P < 0.01) than barrow carcasses, while loins from barrows were higher quality (0.43% more intramuscular fat and slightly less shear force; P < 0.01) than loins from gilts. While this study confirms the well-known biological principle that barrow carcasses have greater levels of fat deposition and lower levels of carcass leanness when compared with gilt carcasses, this study provides a much-needed quantification of these differences for the commercial industry that will undoubtedly be useful as new technologies emerge in upcoming years.

Effects of a myostatin mutation in Japanese quail (Coturnix japonica) on the physicochemical and histochemical characteristics of the pectoralis major muscle.

The aim of this study was to compare the carcass, meat quality, and histochemical characteristics of pectoralis major (PM) muscle between wild type (WT) and myostatin (Mstn) homozygous mutant (HO) quail lines. The HO quail line exhibited significantly heavier body weight (HO vs. WT, 115.7 g vs. 106.2 g, approximately 110%) and PM muscle weight (HO vs. WT, 18.0 g vs. 15.2 g, approximately 120%) compared to the WT (p < 0.001). However, the two groups had similar traits (pH, redness, yellowness, and drip loss) for meat quality, although slightly higher lightness and cooking loss were observed in the mutant quail (103% and 141%, respectively, p < 0.05). For histochemical traits of PM muscle, Mstn mutant quail exhibited lower type IIA and higher type IIB percentage in the deep region than WT quail (p < 0.05), indicating a fiber conversion from the type IIA to IIB. However, the two quail lines had comparable histochemical traits in the superficial region (p > 0.05). These data suggest that Mstn mutation greatly increases muscle mass without significantly affecting meat quality.

An update of the predicted lean yield equation for the Destron PG-100 optical grading probe.

The objective was to update the equation used for prediction of pork carcass leanness with the Destron PG-100 optical grading probe. A recent cutout study (completed in 2020-2021) consisting of 337 pork carcasses was used for this research. An updated equation was generated using a calibration dataset (N = 188 carcasses) and prediction precision and prediction accuracy of the new equation was evaluated using a validation dataset (N = 149 carcasses). The updated equation was generated using forward stepwise multiple regression selection techniques in PROC REG of SAS, and the same parameters as the existing equation were used to fit the model. The updated Destron equation [89.16298 - (1.63023 × backfat thickness) - (0.42126 × muscle depth) + (0.01930 × backfat thickness2) + (0.00308 × muscle depth2) + (0.00369 × backfat thickness × muscle depth)] and the existing Destron equation [68.1863 - (0.7833 × backfat thickness) + (0.0689 × muscle depth) + (0.0080 × backfat thickness2) - (0.0002 × muscle depth2) + (0.0006 × backfat thickness × muscle depth)] were similar in their prediction precision for determination of carcass lean yield (LY), with the updated equation R2 = 0.75 and root mean square error (RMSE) = 1.97 and the existing equation R2 = 0.75 and RMSE = 1.94. However, when prediction accuracy was evaluated using the variance explained by predictive models based on cross-validation (VEcv) and Legates and McCabe's efficiency coefficient (E1), the updated equation (VEcv = 67.97%; E1 = 42.41%) was much more accurate compared with the existing equation (VEcv = -117.53%; E1 = -69.24%). Furthermore, when accuracy was evaluated by separating carcasses into 3% carcass LY groupings ranging from less than 50% LY to greater than 62% LY, the existing equation correctly estimated carcass LY 8.1% of the time, while the updated equation correctly estimated carcass LY 47.7% of the time. In an effort to further compare the abilities of the updated equation, comparisons were made with an advanced automated ultrasonic scanner (AutoFom III), which scans the entire carcass. The prediction precision of the AutoFom III was R2 = 0.83 and RMSE = 1.61, while the AutoFom III correctly estimated carcass LY 38.2% of the time and prediction accuracy calculations for the AutoFom III were VEcv = 44.37% and E1 = 21.34%). Overall, refinement of the Destron PG-100 predicted LY equation did not change prediction precision, but substantially improved prediction accuracy.

In the swine industry, optical grading probes are used to collect measurements at one location on the carcass (i.e., the grading site); this information is used to predict carcass leanness with an established multiple regression equation. For the Destron PG-100 optical probe, the equation currently used by the industry was established using the 1992 Canadian National Cutout Study. The objective of the current study was to update the equation by utilizing a recent cutout study consisting of 337 pork carcasses (N = 188 for the calibration dataset; N = 149 for the validation dataset). A multiple regression equation was generated with the calibration dataset using stepwise techniques and the same parameters as the existing equation were used to fit the model. When the validation dataset was tested for prediction precision, the existing Destron predicted lean yield (LY) equation (R2 = 0.75) and the updated Destron predicted LY equation (R2 = 0.75) were strikingly similar in their abilities to predict carcass LY. However, when prediction accuracy was evaluated by separating carcasses into six 3% LY groupings, the existing Destron predicted LY equation correctly estimated LY 8.1% of the time, while the updated Destron predicted LY equation correctly estimated LY 47.7% of the time.

Can In-Line Iodine Value Predictions (NitFomTM) Be Used for Early Classification of Pork Belly Firmness?

Commercial technologies for assessing meat quality may be useful for performing early in-line belly firmness classification. This study used 207 pork carcasses to measure predicted iodine value (IV) at the clear plate region of the carcass with an in-line near-infrared probe (NitFomTM), calculated IV of belly fat using wet chemistry methods, determined the belly bend angle (an objective method to measure belly firmness), and took dimensional belly measurements. A regression analysis revealed that NitFomTM predicted IV (R2 = 0.40) and belly fat calculated IV (R2 = 0.52) separately contributed to the partial variation of belly bend angle. By testing different NitFomTM IV classification thresholds, classifying soft bellies in the 15th percentile resulted in 5.31% false negatives, 5.31% false positives, and 89.38% correctly classified soft and firm bellies. Similar results were observed when the classification was based on belly fat IV calculated from chemically analyzed fatty acid composition. By reducing the level of stringency on the percentile of the classification threshold, an increase in false positives and decrease in false negatives was observed. This study suggests the IV predicted using the NitFomTM may be useful for early in-line presorting of carcasses based on expected belly firmness, which could optimize profitability by allocating carcasses to specific cutout specifications.

Effects of maternal dietary fatty acids during mid-gestation on growth, glucose metabolism, carcass characteristics, and meat quality of lamb progeny that were fed differing levels of dry matter of intake.

This experiment evaluated growth, glucose metabolism, carcass characteristics, and meat quality of market lambs that were offered ad libitum or restricted (85% of ad libitum) feed intake following two different maternal fatty acid (FA) supplementations while in-utero. Ewes received either a diet supplemented with polyunsaturated FA or saturated/monounsaturated FA during mid- to late-gestation. Following weaning, progeny wethers were fed either ad libitum or a restricted level of feed intake. Ewe FA supplementation did not affect (P ≥ 0.11) growth, meat quality, nor plasma glucose or insulin concentrations of the progeny. Carcass body fat and yield grade of the progeny were affected (P = 0.01) by maternal FA supplementation and restricted feed intake. In summary, maternal FA supplementation did not affect progeny growth, while feed restriction during finishing did not affect meat quality. The interaction between maternal FA supplementation and finishing strategy for body fat accretion indicates that metabolism and the supply of FA during gestation may warrant further investigation.

The Relationship between Lipid Content in Ground Beef Patties with Rate of Discoloration and Lipid Oxidation during Simulated Retail Display.

The relationships between the lipid content, lipid oxidation, and discoloration rate of ground beef during a simulated retail display were characterized in this study. A total of 276 batches of ground beef were manufactured with inside rounds and subcutaneous fat from 138 beef carcasses at different targeted levels of lean:fat. There was a total of four different targeted grind levels during the manufacture of the ground beef, and the lipid content for the samples used in this study ranged from 2% to 32% total lipid. Fatty acid composition was determined based on subcutaneous fat, whereas the proximate composition of moisture and total lipids, instrumental color, visual discoloration, and lipid oxidation measured as thiobarbituric acid reactive substances were evaluated on ground beef patties during 7 days of simulated retail at 4 °C display under LED lights. Analysis for the correlation and the creation of linear regression models indicated that lipid content played a more critical role in the discoloration rate compared to lipid oxidation and fatty acid composition. Lipid oxidation could be more reliably predicted by lipid content and instrumental color compared to visual discoloration. Overall, ground beef formulated with greater lipid content is expected to experience greater rates of lipid oxidation and discoloration during retail display.

The effect of extruded breadfruit flour on structural and physicochemical properties of beef emulsion modeling systems.

The objective was to determine structural and physicochemical properties of beef emulsion modeling systems prepared with native breadfruit flour and four different extruded breadfruit flours. Extrusion conditions for the flours were summarized as two different specific mechanical energies (74 or 145 kJ/kg) and four unique melt temperatures (83 °C, 100 °C, 105 °C, or 126 °C). Meat emulsions formulated at 3% replacement of beef with native or extruded breadfruit flours were compared with control (no additional flour) formulations. Replacement of beef with breadfruit flour (either native or extruded) did not significantly change cooking loss or instrumental redness values of cooked meat emulsions. Interestingly, replacement of beef with the fully gelatinized extruded breadfruit flours altered viscosity during heating as indicated by lower values for storage modulus (44.75% to 62.53% decrease compared with control) and lower values for loss modulus (25.90% to 52.54% decrease compared with control). This resulted in meat emulsions with a significant reduction in textural hardness (28.78% to 37.62% decrease compared with control).

The Effect of Dietary Supplementation with Inorganic or Organic Selenium on the Nutritional Quality and Shelf Life of Goose Meat and Liver.

Ninety-six male goslings were allocated and assigned to treatment using a completely randomized design. Dietary treatments included a basal diet consisting of corn, wheat, and soybean meal with either no additional selenium (CON), 0.3 mg/kg of inorganic selenium (I-Se; sodium selenite), or 0.3 mg/kg of organic selenium (O-Se; selenium-enriched yeast). After a 56-day feeding period, geese were slaughtered on a common ending day and two geese per pen (n = 24) were used for the analyses conducted in this study. Meat (equal portions of the breast and thigh meat) and liver were collected and evaluated for proximate composition, fatty acid profile, pH, phenolic content, thiobarbituric acid reactive substances (TBARS), and total volatile basic nitrogen (TVB-N) over a 9-day storage period at 4 °C. The meat and liver samples from geese supplemented I-Se or O-Se had greater (p < 0.01) lipid content compared with geese not supplemented with additional selenium. At the conclusion of the 9-day storage period, meat and liver samples from geese supplemented I-Se or O-Se had lower (p < 0.05) pH values, greater (p < 0.05) phenolic content, lower (p < 0.05) TBARS values, and lower (p < 0.05) TVB-N compared with geese not supplemented with additional selenium (CON).