RESUMO
Exploring the surface organometallic chemistry on silica of highly electrophilic yttrium complexes is a relatively uncommon endeavor, particularly when focusing on tris-alkyl complexes characterized by Y-C σ-alkyl bonds. A drawback with this class of complexes once grafted on silica, is the frequent occurrence of alkyl transfer by ring opening of siloxane groups, resulting in a mixture of species. Herein, we employed a more stable homoleptic yttrium allyl complex bearing bulky η3-1,3-bis(trimethylsilyl)allyl ligand to limit this transfer reaction. This strategy has been validated by comparing the reactivity between [Y{η3-1,3-C3H3(SiMe3)2}3] and [Y(o-CH2PhNMe2)3] with SiO2-700, where the undesired alkyl transfer reaction occurred for [Y(o-CH2PhNMe2)3] leading to a bipodal [(≡SiO)2Y(o-CH2PhNMe2)] as major surface species, 2, while [Y{η3-1,3-C3H3(SiMe3)2}3] resulted selectively in a monopodal species, [(≡SiO)Y{η3-1,3-C3H3(SiMe3)2}2], 1. The materials obtained were characterized by DRIFT, solid state NMR, mass balance analysis and EXAFS. Catalyst 1 showed high activity compared to 2 in ethylene polymerization. The catalytic performance of this neutral catalyst 1 was extended to pre-industrial scale in the presence of hydrogen and 1-hexene. An unprecedented activity, up to 7400 gPE·gcat-1·h-1 was obtained even with very low concentration of scavenger AliBu3 (TIBA/Y = 1.2). The obtained HDPE exhibited desired spherical particle morphology with broad molar mass distribution.
RESUMO
Coordinative chain transfer polymerization (CCTP) of ethylene and its copolymerization with 1,3-butadiene is conducted in toluene at 80 °C using a combination of {(Me2Si(C13H8)2)Nd(µ-BH4)[(µ-BH4)Li(THF)]}2 (1) metal complex and various organomagnesium compounds used as chain transfer agents including n-butyl-n-octyl-magnesium (BOMAG), n-butyl-mesityl-magnesium (n-BuMgMes), n-butyl-magnesium chloride (n-BuMgCl), n-pentyl-magnesium bromide (n-C5H11MgBr), pentanediyl-1,5-di(magnesium bromide) (PDMB) and isobutyl-magnesium chloride (i-BuMgCl). Kinetics and performance in terms of control of the (co)polymerization are comparatively discussed particularly considering the presence of ether and the nature of the organomagnesium compounds employed. Taking advantage of the well-known reactivity between nitrile and molecular organomagnesium compounds, the functionalization of the chains is further carried out by deactivation of the polymerization medium with benzonitrile or methoxybenzonitrile compounds leading to ketone ω-functionalized chains. The success of the functionalizations is extended to coupling strategies using dinitrile reagents and to the functionalization of high molar mass ethylene butadiene rubber (EBR).
Assuntos
Butadienos , Nitrilas , Polimerização , Nitrilas/química , Butadienos/química , Estrutura Molecular , Etilenos/química , Polienos/química , CinéticaRESUMO
Introduction: In an effort to avoid travel and interpersonal contact, the COVID-19 health crisis was an opportunity to offer preanesthesia teleconsultation (TCs) to patients scheduled for surgery. Materials and Methods: We studied the technical feasibility and patient experiences of these TCs using a 4-point Likert scale questionnaire. Results: Eighty-six patients out of 139 responded. Technical difficulties (no connection, picture, or sound) occurred in 24% of cases. The patient's experience was considered very positive both in terms of feelings and understanding instructions: 4 (4-4). No deprogramming was required. Conclusion: TCs were approved by patients despite technical problems. Further studies are required to ensure that this type of consultation is not inferior to face-to-face consultations. NCT04920604.
Assuntos
COVID-19 , Consulta Remota , Telemedicina , Humanos , COVID-19/epidemiologia , Controle de Doenças Transmissíveis , Inquéritos e QuestionáriosRESUMO
The activity of various additives promoting siloxane equilibration reactions is examined and quantified on model compounds. We found in particular that the "superbase" phosphazene derivative P4 -t Bu can promote very fast exchanges (a few seconds at 90 °C) even at low concentration (<0.1â wt %). We demonstrate that permanent silicone networks can be transformed into reprocessable and recyclable dynamic networks by mere introduction of such additives. Annealing at high temperature degrades the additives and deactivates the dynamic features of the silicone networks, reverting them back into permanent networks. A simple rheological experiment and the corresponding model allow to extract the critical kinetic parameters to predict and control such deactivations.
RESUMO
Block copolymers based on polyethylene (PE) and ethylene butadiene rubber (EBR) were obtained by successive controlled coordinative chain transfer polymerization (CCTP) of a mixture of ethylene and butadiene (80/20) and pure ethylene. EBR-b-PE diblock copolymers were synthesized using the {Me2 Si(C13 H8 )2 Nd(BH4 )2 Li(THF)}2 complex in combination with n-butyl,n-octyl magnesium (BOMAG) used as both the alkylating and chain transfer agent (CTA). Triblock and multiblock copolymers featuring highly semi-crystalline PE hard segments and soft EBR segments were further obtained by the development of a bimetallic CTA, the pentanediyl-1,5-di(magnesium bromide) (PDMB). These new block copolymers undergo crystallization-driven organization into lamellar structures and exhibit a variety of mechanical properties, including excellent extensibility and elastic recovery in the case of triblock and multiblock copolymers.
RESUMO
Block copolymers based on ethylene (E) and butadiene (B) were prepared using the ansa-bis(fluorenyl) complex {Me2 Si(C13 H8 )2 Nd(BH4 )2 Li(THF)}2 in combination with (n-Bu)(n-Oct)Mg (BOMAG) as a chain-transfer agent. The diblock copolymers incorporating a soft poly(ethylene-co-butadiene) segment, called ethylene butadiene rubber (EBR), and a hard polyethylene (PE) one were obtained by simply adjusting the different feeds of monomers during the polymerization. The soluble EBR block was formed first by feeding the catalytic system dissolved in toluene at 70 °C with a mixture of ethylene and butadiene (E/B molar ratio 80 : 20). Then the feeding was stopped leading to the consumption of a large part of the residual monomers. The reactor was finally fed with ethylene to form the PE block. By varying the molar mass of the latter, it is shown that the resulting soft-b-hard block copolymers can self-assemble simultaneously to the growth of the PE block in agreement with a polymerization-induced self-assembly (PISA) mechanism. The self-assembly is discussed considering the reaction conditions, the crystallization of the PE block, and the polymerization mechanism involved.
RESUMO
Anionic polymerization of butadiene or/and styrene is performed with lithium initiators, functional or not. The polymer chains are subsequently transferred to magnesium. The resulting polymeryl-magnesium compounds were combined with {(Me2 Si(C13 H8 )2 )Nd(µ-BH4 )[(µ-BH4 )Li(THF)]}2 metallocene complex to act as macromolecular chain transfer agents (macroCTAs) in coordinative chain transfer polymerization (CCTP) of ethylene (E) or its copolymerization (CCTcoP) with butadiene (B). Block copolymers were produced for the first time by this switch from anionic polymerization to CCTP. Hard and soft blocks such as PB, polystyrene (PS), poly(styrene-co-butadiene) (SBR) obtained by anionic polymerization and PE or poly(ethylene-co-butadiene) (EBR) produced by CCT(co)P were combined and the corresponding structures were characterized.
RESUMO
We report a full experimental comparison study on the injection of a Ti:Sa multi-terawatt amplifier chain with a standard 15 fs Ti:Sa oscillator and 35 fs frequency-doubled fiber oscillator. The study highlights that the Ti:Sa oscillator, with high performance in terms of pulse duration and spectral width, can be replaced by the frequency-doubled fiber oscillator to seed Ti:Sa amplifier chains almost without any compromise on the output pulse duration and picosecond contrast. Finally, we demonstrate for the first time to our knowledge a 30 TW and 33 fs Ti:Sa amplifier injected by a fiber oscillator.
RESUMO
BACKGROUND: Remote monitoring of mean arterial blood pressure (MAP), heart rate (HR) or oxygen saturation (SpO2) remains a challenge in outpatient surgery. This study evaluates a new digital technology (Smart Angel™) for remotely monitoring hemodynamic data in real time: data transmitted from the patient's home to a central server, using a dedicated web-based software package. METHODS: Adults scheduled for elective outpatient surgery were prospectively enrolled. In the first 5 postoperative days, patients completed a self-report questionnaire (pain, comfort, nausea, vomiting) and recorded SpO2, HR and MAP via two wireless Bluetooth monitors connected to a 4G tablet to transmit the data to a website, in real time, using Smart Angel™ software. Before transmission to the website, these data were also self-reported by the patient on a paper form. The primary outcome was the proportion of variables (self-monitored physiological data + questionnaire scores) correctly transmitted to the hospital via the system compared with the paper version. On Day 5, a system usability scale survey (SUS score 1-100) was also attributed. RESULTS: From May 2018 to September 2018, data were available for 29 out of 30 patients enrolled (1 patient was not discharged from hospital after surgery). The remote monitoring technology recorded 2038 data items (62%) compared with 2656 (82%) items recorded on the paper form (p = 0.001). The most common errors with the remote technology were software malfunctioning when starting the MAP monitor and malfunctioning between the tablet and the Bluetooth monitor. No serious adverse events were noted. The SUS score for the system was 85 (68-93) for 26 patients. CONCLUSION: This work evaluates the ability of a pilot system for monitoring remote physiological data using digital technology after ambulatory surgery and highlights the digital limitations of this technology. Technological improvements are required to reduce malfunctioning (4G access, transmission between apps). TRIAL REGISTRATION: ClinicalTrials.gov ( NCT03464721 ) (March 8, 2018).
Assuntos
Procedimentos Cirúrgicos Ambulatórios , Monitorização Fisiológica/instrumentação , Tecnologia de Sensoriamento Remoto/instrumentação , Tecnologia sem Fio , Adulto , Estudos de Viabilidade , Feminino , Hemodinâmica , Humanos , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Estudos ProspectivosRESUMO
BACKGROUND: Medication errors have a high prevalence in surgery and management of home medication is strongly involved in these errors. In scheduled surgery, the preoperative consultation is a privileged time to inform the patient about the management of her/his home medication before admission. This study assessed the impact of a pre-anesthesia best possible medication history (PA-BPMH) on admission. The PA-BPMH was performed by a clinical pharmacist prior to the anesthesia consultation for anesthesiologists to prescribe admission medical orders for scheduled orthopedic surgery patients. METHODS: This was a prospective observational study which was carried out in an orthopedic surgery department. All patients over 18 years old with an elective orthopedic surgery were eligible except ambulatory surgery patients. The pharmacist registered the PA-BPMH into the software making it available for anesthesiologists for the pre-admission medication order. Finally, a medication reconciliation was performed at admission. The main outcome was the percentage of patients with at least one unintended medication discrepancy (UMD) at admission. The nature, potential clinical impact and acceptance rate of each UMD detected were assessed. Also, the PA-BPMH process was described and patients and anesthesiologists satisfaction was evaluated. RESULTS: A total of 455 patients had a pharmaceutical consultation. Medication reconciliation was performed at admission for 360 patients. Overall, at least one UMD was observed in 13.0% of patients (n = 47). A total of 63 UMD were detected. The most common type of UMD was omission (25.4%) and incorrect drug (23.8%).Two UMD (3.2%) were evaluated as life threatening. All the UMD detected were corrected on the admission medication order. CONCLUSION: A preoperative pharmacist-anesthesiologist teamwork seems to improve the safety of perioperative management of home medication for scheduled orthopedic surgery patients. This process needs a randomized clinical trial across a wider range of surgeries before its implementation.
Assuntos
Procedimentos Ortopédicos , Serviço de Farmácia Hospitalar , Cuidados Pré-Operatórios , Encaminhamento e Consulta , Idoso , Feminino , Pesquisa sobre Serviços de Saúde , Humanos , Masculino , Erros de Medicação/prevenção & controle , Reconciliação de Medicamentos , Pessoa de Meia-Idade , Admissão do Paciente , Estudos ProspectivosRESUMO
While the introduction of polymers into aerogels strongly enhances their toughness, truly elastic monolithic aerogels which restore their dimensions upon extensive compression are still challenging to synthesize. In this context hydrophobic semi-crystalline polymers with low glass transition temperatures, and combined stiffness and flexibility, have only recently attracted attention. Shown here is that polyethylene aerogels with a low density, and combined chemical crosslinking and high crystallinity, display high moduli and excellent mechanical resilience. To maximize the crystallinity of these aerogels while maintaining a high crosslinking density, polyethylene networks with well-defined segments were synthesized by hydrosilylation crosslinking of telechelic, vinyl-functionalized oligomers obtained from catalyzed chain-growth polymerization. Recoverable deformations both above and below the melting temperature of polyethylene affords remarkable shape-memory properties.
RESUMO
Coherent beam combining in tiled-aperture configuration is demonstrated on seven femtosecond fiber amplifiers using an interferometric phase measurement technique. The residual phase error between two fibers is as low as λ/55 RMS and a combination efficiency of 48% has been achieved. The combined pulses are compressed to 216 fs, delivering 71 W average power at a repetition rate of 55 MHz. Operating the laser system in a nonlinear regime with an estimated B-integral of 5 rad yields a combining efficiency of 45% with the same phase stability. These results pave the way to very large high-power and high energy coherent beam combining systems.
RESUMO
Monofunctional or telechelic polyethylenes (PEs) carrying phosphonic acid end groups are obtained from functional PE produced by catalyzed chain growth (CCG) on magnesium. CCG is first used to produce iodo-end-functionalized PE (PE-I) that is efficiently turned into phosphonate end-functionalized PE (PE-P(O)(OEt)2 ) in the presence of triethylphosphite through the Michaelis-Arbuzov reaction. A simple treatment of the resulting PE-P(O)(OEt)2 with bromotrimethylsilane leads to the targeted phosphonic acid end-functionalized PE (PE-P(O)(OH)2 ) for the first time. Vinyl-end-functionalized analogs (Vin-PE-P(O)(OEt)2 ) are produced using vinyl-end-functionalized PE-I (Vin-PE-I) recently obtained through CCG. A cross-metathesis reaction is then employed to couple Vin-PE-P(O)(OEt)2 and produce after treatment with bromotrimethylsilane the corresponding unprecedented α-ω-(diphosphonic acid) telechelic PE ((OH)2 (O)P-PE-P(O)(OH)2 ).
Assuntos
Ácidos Fosforosos/química , Polietilenos/química , Polietilenos/síntese químicaRESUMO
Telechelic α,ω-iodo-vinyl-polyethylenes (Vin-PE-I) were obtained by catalytic ethylene polymerization in the presence of [(C5 Me5 )2 NdCl2 Li(OEt2 )2 ] in combination with a functionalized chain-transfer agent, namely, di(10-undecenyl)magnesium, followed by treatment of the resulting di(vinylpolyethylenyl)magnesium compounds ((vinyl-PE)2 Mg) with I2 . The iodo-functionalized vinylpolyethylenes (Vin-PE-I) were transformed into unique divinyl-functionalized polyethylenes (Vin-PE-Vin) by simple treatment with tBuOK in toluene at 95 °C. Thiol-ene reactions were then successfully performed on Vin-PE-Vin with functionalized thiols in the presence of AIBN. A range of homobifunctional telechelic polyethylenes were obtained on which a hydroxy, diol, carboxylic acid, amine, ammonium chloride, trimethoxysilyl, chloro, or fluoroalkyl group was installed quantitatively at each chain end.
RESUMO
The one-step polycondensation of diamines and diboranes triggered by the inâ situ deprotonation of the diammonium salts and concomitant reduction of bisboronic acids leads to the assembly of polymer chains through multiple Lewis pairing in their backbone. These new polyboramines are dihydrogen reservoirs that can be used for the hydrogenation of imines and carbonyl compounds. They also display a unique dihydrogen thermal release profile that is a direct consequence of the insertion of the amine-borane linkages in the polymeric backbone.
RESUMO
The various steps in the mechanism of olefin polymerizations mediated by neutral rare-earth metallocene complexes are discussed. The complexes are either trivalent hydride and alkyl rare-earth compounds or divalent metallocenes that are activated by the monomer via an oxidation step. The stereospecific polymerizations of conjugated dienes based on the association of a cationic metallocene complex and an alkylaluminum and the polymerization mechanism based on monomer insertion into an aluminum-carbon bond are also discussed. The exploitation of metallocene complexes for the copolymerization of olefins with conjugated dienes is the subject of a third part of this review. The synthesis of new elastomers called ethylene butadiene rubber (EBR) is highlighted. Finally, the use of rare-earth metallocenes in macromolecular engineering is detailed. This includes the synthesis of functional polyolefins and block copolymers including thermoplastic elastomers.
RESUMO
Homoleptic benzyl derivatives of titanium and zirconium have been grafted onto silica that was dehydroxylated at 200 and 700 °C, thereby affording bi-grafted and mono-grafted single-site species, respectively, as shown by a combination of experimental techniques (IR, MAS NMR, EXAFS, and elemental analysis) and theoretical calculations. Marked differences between these compounds and their neopentyl analogues are discussed and rationalized by using DFT. These differences were assigned to the selectivity of the grafting process, which, depending on the structure of the molecular precursors, led to different outcomes in terms of the mono- versus bi-grafted species for the same surface concentration of silanol species. The benzylzirconium derivatives were active towards ethylene polymerization in the absence of an activator and the bi-grafted species displayed higher activity than their mono-grafted analogues. In contrast, the benzyltitanium and neopentylzirconium counterparts were not active under similar reaction conditions.
RESUMO
CONTEXT: Blood transfusion has increased significantly during the last decade and blood wastage reduction is a medical and economic challenge in hospital practice and for institutional quality, particularly in the ICU and operating theatre. OBJECTIVE: To evaluate the impact of multiple strategies in one hospital to reduce red blood cell wastage. DESIGN: Multicentre, prospective, comparative, observational study. SETTING: Over 10 years, the study was conducted over two time periods. During the first period (2000 to 2003), information was given to medical professionals about blood wastage, and audits (reasons for wastage) were performed, in a large teaching institution (more than 4% wastage in 1999). The second period (2004 to 2010) was designed to analyse the impact of seven strategies intended to minimise blood wastage. Blood wastage reduction in the local centre was compared with regional (64 institutions) and national centres (1470 institutions). Reduction was compared using the Mann-Kendall non-parametric trend test. PATIENTS: Local centre (22,572 transfused patients, Nîmes, France), regional centre (South France, 64 institutions, 208,525 transfused patients) and national centres (France, 1470 institutions). INTERVENTIONS: Medical and surgical procedures. MAIN OUTCOME MEASURES: The primary end-point was to describe the percentage of blood wastage for two periods in a local centre. The secondary objective was to compare the percentage of blood wastage in the local centre with wastage at regional and national centres. RESULTS: Over the 10 year study period the percentage of blood wastage in the local centre decreased, with a significant reduction in the second period, from more than 4% (1999) to less than 1% (2010; P < 0.05). Blood wastage at regional and national centres was never less than 1%. Inadequate containers for transport, absence of a temperature analyser in the ICU and inadequate intraoperative blood strategies (excessive orders of blood) were the main causes of wastage. Correction of these points affected the outcome favourably in the second period, but transfusion information was poor in the first period. CONCLUSION: Seven simple strategies (including transport containers with an effective temperature analyser and audits) decreased blood wastage, especially in the ICU and operating theatre.
Assuntos
Preservação de Sangue , Transfusão de Sangue , França , Humanos , Estudos Prospectivos , TemperaturaRESUMO
A route to fully miscible polyethylene (PE) nanocomposites has been established based on polymer-brush-coated nanoparticles. These nanoparticles can be mixed with PE at any ratio, with homogeneous dispersion, and without aggregation. This allowed a first systematic study of the thermomechanical properties of PE nanocomposites without interference from aggregation effects. We observe that the storage modulus in the semicrystalline state and the softening temperature increase significantly with increasing nanoparticle content, whereas the melt viscosity is unaltered by the presence of nanoparticles. We show that the complete miscibility with the semicrystalline polymer matrix and the improvement of thermomechanical properties in the solid state is caused by the PE-coated nanoparticles being nucleating agents for the crystallization of PE. This provides a general route to fully miscibility nanocomposites with semicrystalline polymers.
RESUMO
Transverse parasitic lasing is well known for limiting the signal gain and the pulse energy that can be extracted from Ti:sapphire petawatt amplifiers. We have developed a technique for suppressing these parasitic lasing modes based on perfect refractive index-matching liquid doped with a broad-bandwidth absorber to suppress the transverse lasing while ensuring proper heat removal from the Ti:sapphire crystal. The 800 nm laser output with a bandwidth of 41 nm (FWHM) and peak energy of 22.7 J at a repetition rate of 1 Hz is demonstrated.