Fracture strength of incisor crowns after intracoronal bleaching with sodium percarbonate.

OBJECTIVES: To compare the fracture resistance of bovine teeth after intracoronal bleaching with sodium percarbonate (SPC) or sodium perborate (SP) mixed with water or 20% hydrogen peroxide (HP). MATERIALS AND METHODS: Fifty extracted bovine teeth were divided into four experimental groups (G1-G4) and one control (n = 10) after endodontic treatment. Following root canal obturation, a glass ionomer barrier was placed at the cemento-enamel junction. After that, the pulp chambers were filled with: G1 - SP with water; G2 - SP with 20% HP; G3 - SPC with water; and G4 - SPC with 20% HP. No bleaching agent was used in the control group. Coronal access cavities were sealed with glass ionomer and specimens were immersed in artificial saliva. The bleaching agents were replaced after 7 days, and teeth were kept in artificial saliva for an additional 7 days, after which the pastes were removed and the coronal access cavities were restored with glass ionomer. Crowns were subjected to compressive load at a cross head speed of 0.5 mm min(-1) applied at 135° to the long axis of the root by an EMIC DL2000 testing machine, until coronal fracture. Data were statistically analysed by anova and Tukey test. RESULTS: No differences in fracture resistance were observed between the experimental groups (P > 0.05). However, all experimental groups presented lower fracture resistance than the control group (P < 0.05). CONCLUSION: SPC and SP led to equal reduction on fracture resistance of dental crowns, regardless of being mixed with water or 20% HP.

pH changes after manual or ultrasonic instrumentation and smear layer removal with EDTA or ultrasonic.

The purpose of the present study was to evaluate the influence of instrumentation techniques associated with the smear layer removal, in the pH changes of the root surface. Thirty mandibular humans premolars were divided into three groups: Group I - instrumentation by Ohio technique and final cleaning with EDTA (3 minutes); Group II - instrumentation by Ohio technique and final cleaning with ultrasonic (1 minute); Group III - instrumentation by the ultrasonic technique and final cleaning with ultrasonic (1 minute). The pH was measured in the cavities prepared in the cervical, middle and apical thirds of the lateral wall of each root. The teeth were evaluated at the initiation of the experiment, and 3, 7, 14, 21, 30 days after of the intracanal dressing of the calcium hydroxide with camphorated p-monochlorophenol (Calen/PMCC). All the groups presented increasing pH values; group III presented the highest average pH, followed by groups II and I; the values for the apical third were lower than those of the middle and cervical thirds (anova and Tukey test). The results showed that the biomechanical preparation by the ultrasonic technique and smear layer removal with ultrasonic showing the highest diffusion of the calcium and hydroxyl ions from the intracanal dressing (P < 0.05).

In vitro evaluation of the obturation ability, adaptation and compaction of gutta-percha in the root canal system employing different filling techniques.

The aim of this study was to evaluate the in vitro obturation quality of four filling methods: active lateral condensation, a modification of Tagger's hybrid technique, ENAC ultrasound technique and the Microseal technique. The study was performed on one hundred and sixteen single-rooted human teeth, divided into four groups of twenty nine teeth, embedded in resin, longitudinally sectioned and placed together on a wooden device with screws. After instrumentation, a cavity was made with a bur in the cervical, medium and apical thirds of the root canal in order to simulate lateral canals. The teeth were filled with the different techniques. Obturation quality was evaluated employing photographs and radiographs. The statistical analysis using the Chi square (chi2) test revealed that the Microseal technique reached the best results followed by the modified Tagger's hybrid technique, the ENAC ultrasound technique and the active lateral condensation technique.

Ytterbium Oxide as Radiopacifier of Calcium Silicate-Based Cements. Physicochemical and Biological Properties.

This study evaluated physicochemical properties, cytotoxicity and bioactivity of MTA Angelus (MTA), calcium silicate-based cement (CSC) and CSC with 30% Ytterbium oxide (CSC/Yb2O3). Setting time was evaluated using Gilmore needles. Compressive strength was evaluated in a mechanical machine. Radiopacity was evaluated using radiographs of materials and an aluminum scale. Solubility was evaluated after immersion in water. Cell viability was evaluated by means of MTT assay and neutral red staining, and the mineralization activity by using alkaline phosphatase activity and Alizarin Red staining. The data were submitted to ANOVA, Tukey and Bonferroni tests (5% significance). The bioactive potential was evaluated by scanning electron microscopy. The materials presented similar setting time. MTA showed the lowest compressive strength. MTA and CSC/Yb2O3 presented similar radiopacity. CSC/Yb2O3 showed low solubility. Saos-2 cell viability tests showed no cytotoxic effect, except to 1:1 dilution in NR assay which had lower cell viability when compared to the control. ALP at 1 and 7 days was similar to the control. MTA and CSC had greater ALP activity at 3 days when compared to control. All the materials present higher mineralized nodules when compared with the control. SEM analysis showed structures suggesting the presence of calcium phosphate on the surface of materials demonstrating bioactivity. Ytterbium oxide proved to be a properly radiopacifying agent for calcium silicate-based cement since it did not affected the physicochemical and biological properties besides preserving the bioactive potential of this material.

Radiographic and micro-computed tomography classification of root canal morphology and dentin thickness of mandibular incisors.

CONTEXT: Root canal anatomy is evaluated using different methodologies. AIMS: The aim of this study is to evaluate and classify root canal morphology and dentin thicknesses (DT), comparing radiographic and micro-computed tomography (CT) analysis. MATERIALS AND METHODS: Canal diameter and DT of mandibular incisors (n = 520) were evaluated using digital radiographs in buccolingual (BL) and mesiodistal (MD) directions. The diameter ratio (DR) BL/MD was classified: flattened (FL, DR >4); oval (OV, 2≤ DR ≥4); rounded (RN, 1.1< DR >2); round (RO, 0.9≤ DR ≥1.1); and with BL flatness (BL, DR <0.9). OV (n = 110) were subjected to micro-CT. DT and DR were evaluated at 3, 6, and 9 mm. ANOVA, Tukey, and paired Wilcoxon tests (P < 0.05) were used. RESULTS: Radiographic classification was 23.3% FL, 41.3% OV, 27.3% RN, 4.5% RO, and 3.6% BL. DT was similar. Radiographic DT at 3 and 9 mm was greater than micro-CT (P < 0.05) and was similar at 6 mm (P > 0.05). DR differed between the analyses. Oval canals were predominant at all levels radiographically and at 9 and 6 mm in micro-CT analysis, with greater variation at 3 mm. CONCLUSION: Oval root canals are predominant in mandibular incisors at 9 mm. Radiographic DT is larger than observed in micro-CT at 3 and 9 mm, and the classification differed in each root level. The classification at 9 mm is indicated.

A Novel Model for Evaluating the Flow of Endodontic Materials Using Micro-computed Tomography.

INTRODUCTION: Flow and filling ability are important properties of endodontic materials. The aim of this study was to propose a new technique for evaluating flow using micro-computed tomographic (µCT) imaging. METHODS: A glass plate was manufactured with a central cavity and 4 grooves extending out horizontally and vertically. The flow of MTA-Angelus (Angelus, Londrina, PR, Brazil), zinc oxide eugenol (ZOE), and Biodentine (BIO) (Septodont, Saint Maur des Fossés, France) was evaluated using International Standards Organization (ISO) 6876/2002 and a new technique as follows: 0.05 ± 0.005 mL of each material was placed in the central cavity, and another glass plate and metal weight with a total mass of 120 g were placed over the material. The plate/material set was scanned using µCT imaging. The flow was calculated by linear measurement (mm) of the material in the grooves. Central cavity filling was calculated in mm3 in the central cavity. Lateral cavity filling (LCF) was measured by LCF mean values up to 2 mm from the central cavity. Data were analyzed statistically using analysis of variance and Tukey tests with a 5% significance level. RESULTS: ZOE showed the highest flow rate determined by ISO methodology (P < .05). Analysis performed using µCT imaging showed MTA-Angelus and ZOE had higher linear flow rates in the grooves. Central cavity filling was similar for the materials. However, LCF was higher for BIO versus ZOE. CONCLUSIONS: Although ZOE presented better flow determined by ISO methodology, BIO showed the best filling ability. The model of the technique proposed for evaluating flow using µCT imaging showed proper and reproducible results and could improve flow analysis.

Cytocompatibility, physical properties, and antibiofilm activity of endodontic sealers with amoxicillin.

The aim was to evaluate the cytocompatibility of the AH Plus and Sealapex associated with amoxicillin (AA) in a quantity of 10% by total weight of the sealers, the flow and setting time of these sealers with 10%-0.25% AA and antibiofilm activity of these sealers associated with AA in a concentration that does not alter their physical properties (1%). Cytocompatibility was assessed by MTT, neutral red and cytoskeletal fluorescence assays. Setting time and flow was evaluated using the specifications of ISO 6876/2012. For the antibiofilm evaluation, materials were placed in direct contact with E. faecalis biofilm induced on dentin blocks. The incorporation of AA into the sealers did not diminish the viability of the fibroblasts and did not cause structural changes in the cytoskeletal. The flow of AH Plus + AA at 1.0; 0.5 and 0.25%, and of Sealapex + AA at 5.5; 2.5; 1.0; 0.5 and 0.25% were within the specifications of the ISO 6876. AH Plus, and AH Plus + AA at 1.0; 0.50 and 0.25% presented a setting time of 730, 439, 455, and 474 min., respectively. Sealapex - pure or associated with AA did not set completely. The addition of 1% AA to the sealers did not increase their antibiofilm activity. It was concluded that the incorporation of 10% AA caused no toxic effects on fibroblasts, but harmed the physical properties. The addition of AA in concentration that does not affect the physical properties of the sealers did not increase their antibiofilm activity.

Effect of ProTaper and Reciproc preparation and gutta-percha cone on cold lateral compaction.

CONTEXT: The effectiveness of cold lateral compaction depends on the root canal preparation and used gutta-percha cone. AIMS: The aim of this study is to evaluate finger spreader penetration into root canals prepared with ProTaper (PT) or Reciproc (Rec) systems and filled with gutta-percha cones with different tapers. MATERIALS AND METHODS: Twenty-four simulated root canals in resin blocks with 30° curvature were prepared up to PT F2 or Rec R25. They were divided into four experimental groups according to the master gutta-percha cone and preparation (25.02 or F2/PT, and 25.02 or R25/Rec). Cold lateral compaction was performed using a stainless steel finger spreader size B. The set cone-finger spreader-resin block was placed in a universal test machine, and a load up to 1.5 kg was applied on the finger spreader. The final distance between the finger spreader and apical preparation after load application was obtained. For comparison among the groups, data were submitted to ANOVA and Tukey's tests, with a significance level of 5%. RESULTS: Greater finger spreader penetration was observed for 0.02/Rec and 0.02/PT, followed by F2/PT and R25/Rec. CONCLUSION: The use of cones associated with PT and Rec preparations does not allow the finger spreader penetration up to the apical third.

Surface characteristics of reciprocating instruments before and after use--a SEM analysis.

The presence of debris, defects and deformations of endodontic reciprocating instruments before and after chemical-mechanical preparation (MCP) was analyzed using scanning electron microscopy (SEM). The following 26 instruments were divided into 2 groups: Waveone (n=13) and Reciproc (n=13) and examined by SEM (150 x magnification) prior to canal preparation at 2 and 4 mm from the tip. The instruments were used in the preparation of mesial root canals of 26 extracted human permanent mandibular molars. The instruments were then washed in ultrasonic bath and subjected to new microscopic analysis of debris and deformation by a score that used the presence or absence of irregular edges, grooves, microcavities and burrs as criteria. After the SEM analysis and with the scores of the examiners, the collected data were subjected to descriptive statistical analysis using the Kruskall-Walis and Mann Whitney test at a 5% significance level. All instruments examined presented debris before and after use. A statistically significant difference was found for defects and deformation between the groups (p<0.05). The presence of defects and deformities was higher in the WaveOne instruments, and Reciproc instruments presented a lower rate.

Influence of sealer placement technique on the quality of root canal filling by lateral compaction or single cone.

The aim of this study was to evaluate the influence of the sealer placement technique on the quality of root canal filling using Lateral Compaction (LC) or Single Cone (SC). In order to do that, 60 mesial roots of mandibular first molars were prepared and divided into 2 groups (n=30), according to the filling technique: LC and SC. Each group was subdivided into 3 subgroups (n=10), according to the different sealer placement methods: A: Master gutta-percha (GP) cone; B: Lentulo spiral; C: File. The roots were sectioned at 2, 4 and 6 mm from the apex and photographed with the aid of a digital microscope. Then, areas of GP, endodontic sealer and voids were measured, and these data were subjected to statistical analysis. LC technique showed no statistically difference (p>0.05) in the percentage of GP area, sealer and voids between the subgroups at any of the three levels. After use of SC, higher percentages of sealer area were found at all levels (p<0.01) when the sealer was placed with a file. At 2 mm, higher percentage of void areas (p<0.05) was observed when the cone was used, lower percentage with K-file and the lowest percentage with Lentulo. At 4 mm, cone showed higher percentage of void areas (p<0.05). At 6 mm, there were no significant differences (p>0.05) between the three methods. Considering these results, using an instrument for sealer placement was important in the SC technique to reduce voids. Regarding LC, the sealer placement techniques provided similar results.

Evaluation of flow and filling of root canal sealers using different methodologies / Avaliação do escoamento e preenchimento de cimentos obturadores utilizando diferentes metodologias

Abstract Introduction Flow and filling ability of root canal sealers are indispensable for hermetic sealing of the root canal. Micro-computed tomography (micro-CT) can be used as a complementary methodology to evaluate such properties. Objective To evaluate the flow and filling ability of AH Plus, Endofill and Sealapex by conventional methodology and micro-CT. Material and method The flow of the sealers was analyzed according to ISO 6876/2012 and complemented by the area evaluation. Glass plates were manufactured with diameters of 1×1×2 mm and 1×1×1 mm (length, width and height), with a central cavity and four grooves in the horizontal and vertical directions. Each material was placed in the central cavity. Another glass plate and a metal weight were placed on the cement and kept for 10 minutes. The glass plate/sealer set was scanned using micro-CT. The flow was calculated by linear measurement of the material in the grooves. The central filling (mm3) was calculated in the central cavity and the lateral filling was measured up to 2 mm from the central cavity. Data were submitted to ANOVA/Tukey tests (α=0.05). Result All evaluated sealers presented flow according to ISO 6876 standards. The materials showed central cavity filling capacity higher than 80% and lateral filling greater than 75%. There was no difference in flow (mm and mm2) and in the filling ability (mm3) provided by the materials (p>0.05). Conclusion All evaluated root canal sealers showed adequate flow and filling capacity, suggesting their clinical application.

Resumo Introdução Escoamento e capacidade de preenchimento de cimentos obturadores são indispensáveis para um selamento hermético do canal radicular. Microtomografia computadorizada (micro-CT) pode ser utilizada como uma metodologia complementar para avaliação de tais propriedades. Objetivo Avaliar escoamento e capacidade de preenchimento de AH Plus, Endofill e Sealapex, por meio de metodologia convencional e micro-CT. Material e método O escoamento dos cimentos foi analisado de acordo com as normas ISO 6876/2012 e complementado pela avaliação em área. Placas de vidro foram confeccionadas nos diâmetros de 1×1×2 mm e 1×1×1 mm (comprimento, largura e altura), com uma cavidade central e quatro canaletas nas direções horizontal e vertical. Cada material foi colocado na cavidade central. Outra placa de vidro e um peso de metal foram colocados sobre o cimento e mantidos por 10 minutos. O conjunto placa de vidro/cimento foi escaneado usando micro-CT. O escoamento foi calculado por medição linear do material nas canaletas. O preenchimento (mm3) central foi calculado na cavidade central e o preenchimento lateral foi medido até 2 mm a partir da cavidade central. Os dados foram submetidos aos testes ANOVA/Tukey (α=0.05). Resultado Todos os cimentos avaliados apresentaram escoamento de acordo com as normas ISO 6876. Os materiais mostraram capacidade de preenchimento da cavidade central superior a 80% e preenchimento lateral superior a 75%. Não houve diferença no escoamento (mm e mm2) e na capacidade de preenchimento (mm3) proporcionada pelos materiais (p>0.05). Conclusão Todos os cimentos obturadores avaliados mostraram adequado escoamento e capacidade de preenchimento, sugerindo a aplicação clínica dos mesmos.

Comparison of cyclic fatigue and torsional resistance in reciprocating single-file systems and continuous rotary instrumentation systems.

As compared with continuous rotary systems, reciprocating motion is believed to increase the fatigue resistance of NiTi instruments. We compared the cyclic fatigue and torsional resistance of reciprocating single-file systems and continuous rotary instrumentation systems in simulated root canals. Eighty instruments from the ProTaper Universal, WaveOne, MTwo, and Reciproc systems (n = 20) were submitted to dynamic bending testing in stainless-steel simulated curved canals. Axial displacement of the simulated canals was performed with half of the instruments (n = 10), with back-and-forth movements in a range of 1.5 mm. Time until fracture was recorded, and the number of cycles until instrument fracture was calculated. Cyclic fatigue resistance was greater for reciprocating systems than for rotary systems (P < 0.05). Instruments from the Reciproc and WaveOne systems significantly differed only when axial displacement occurred (P < 0.05). Instruments of the ProTaper Universal and MTwo systems did not significantly differ (P > 0.05). Cyclic fatigue and torsional resistance were greater for reciprocating systems than for continuous rotary systems, irrespective of axial displacement.

The efficacy of the self-adjusting file and ProTaper for removal of calcium hydroxide from root canals.

OBJECTIVE: The goal of this study was to evaluate the efficacy of the Self-Adjusting File (SAF) and ProTaper for removing calcium hydroxide [Ca(OH)2] from root canals. MATERIAL AND METHODS: Thirty-six human mandibular incisors were instrumented with the ProTaper system up to instrument F2 and filled with a Ca(OH)2-based dressing. After 7 days, specimens were distributed in two groups (n=15) according to the method of Ca(OH)2 removal. Group I (SAF) was irrigated with 5 mL of NaOCl and SAF was used for 30 seconds under constant irrigation with 5 mL of NaOCl using the Vatea irrigation device, followed by irrigation with 3 mL of EDTA and 5 mL of NaOCl. Group II (ProTaper) was irrigated with 5 mL of NaOCl, the F2 instrument was used for 30 seconds, followed by irrigation with 5 mL of NaOCl, 3 mL of EDTA, and 5 mL of NaOCl. In 3 teeth Ca(OH)2 was not removed (positive control) and in 3 teeth canals were not filled with Ca(OH)2 (negative control). Teeth were sectioned and prepared for the scanning electron microscopy. The amounts of residual Ca(OH)2 were evaluated in the middle and apical thirds using a 5-score system. RESULTS: None of the techniques completely removed the Ca(OH)2 dressing. No difference was observed between SAF and ProTaper in removing Ca(OH)2 in the middle (P=0.11) and the apical (P=0.23) thirds. CONCLUSION: The SAF system showed similar efficacy to rotary instrument for removal of Ca(OH)2 from mandibular incisor root canals.

Ex-vivo effect of intracanal medications based on ozone and calcium hydroxide in root canals contaminated with Enterococcus faecalis.

This ex vivo study evaluated the antibacterial effect of intracanal medications in root canals contaminated with Enterococcus faecalis. Fifty single-rooted human teeth were contaminated with E. faecalis (ATCC 29212) and incubated at 37°C for 21 days. The specimens were randomly divided into 5 groups according to the intracanal medication used: OZ-PG: ozonized propylene glycol; CH/CPMC: calcium hydroxide/camphorated paramonochlorophenol; OZ-PG/CH ozonized PG/CH; PC: positive control group (no medication); and NC: negative control group (no contamination). The samples were collected after 7 days (post-medication) and 14 days (final). Bacterial growth was checked by counting the colony-forming units (CFU). OZ-PG and CH/CPMC reduced significantly the CFU counts compared with PC in the post-medication and final samples, with no statistically significant differences among them. On the other hand, OZ-PG/CH did not reduce significantly the number of bacteria compared with PC. In conclusion, among the evaluated medications OZ-PG and CH/CPMC were the most effective against E. faecalis.

Ytterbium oxide as radiopacifier of calcium silicate-based cements. physicochemical and biological properties

Abstract This study evaluated physicochemical properties, cytotoxicity and bioactivity of MTA Angelus (MTA), calcium silicate-based cement (CSC) and CSC with 30% Ytterbium oxide (CSC/Yb2O3). Setting time was evaluated using Gilmore needles. Compressive strength was evaluated in a mechanical machine. Radiopacity was evaluated using radiographs of materials and an aluminum scale. Solubility was evaluated after immersion in water. Cell viability was evaluated by means of MTT assay and neutral red staining, and the mineralization activity by using alkaline phosphatase activity and Alizarin Red staining. The data were submitted to ANOVA, Tukey and Bonferroni tests (5% significance). The bioactive potential was evaluated by scanning electron microscopy. The materials presented similar setting time. MTA showed the lowest compressive strength. MTA and CSC/Yb2O3 presented similar radiopacity. CSC/Yb2O3 showed low solubility. Saos-2 cell viability tests showed no cytotoxic effect, except to 1:1 dilution in NR assay which had lower cell viability when compared to the control. ALP at 1 and 7 days was similar to the control. MTA and CSC had greater ALP activity at 3 days when compared to control. All the materials present higher mineralized nodules when compared with the control. SEM analysis showed structures suggesting the presence of calcium phosphate on the surface of materials demonstrating bioactivity. Ytterbium oxide proved to be a properly radiopacifying agent for calcium silicate-based cement since it did not affected the physicochemical and biological properties besides preserving the bioactive potential of this material.

Resumo Este estudo avaliou as propriedades físico-químicas, citotoxicidade e bioatividade do MTA Angelus (MTA), cimento à base de silicato de cálcio (CSC) e CSC com 30% de óxido de itérbio (CSC/Yb2O3). O tempo de presa foi avaliado usando agulhas Gilmore. A resistência à compressão foi avaliada em uma máquina mecânica. A radiopacidade foi avaliada utilizando radiografias dos materiais e uma escala de alumínio. A solubilidade foi avaliada após imersão em água. A viabilidade celular foi avaliada por meio do ensaio MTT e coloração de vermelho neutro (NR), e a atividade de mineralização por meio da atividade da fosfatase alcalina e a coloração com Vermelho de Alizarina. Os dados foram submetidos aos testes ANOVA, Tukey e Bonferroni (5% de significância). O potencial bioativo foi avaliado por microscopia eletrônica de varredura. Os materiais apresentaram tempo de presa semelhante. O MTA mostrou menor resistência à compressão. MTA e CSC/Yb2O3 apresentaram radiopacidade semelhante. CSC/Yb2O3 apresentou menores valores de solubilidade. A viabilidade celular realizada pelos ensaios de MTT e NR não revelaram efeitos ctotóxicos em todas as diluições, exceto na diluição 1:1 no NR, o qual mostrou baixa viabilidade celular (p<0.05) em todos materiais testados quando comparado ao controle. A atividade de ALP em 1 e 7 dias foi similar ao controle (p>0.05). MTA e CSC tiveram significante aumento na atividade de ALP aos 3 dias quando comarados ao controle (p>0.05). Todos os materiais apresentaram grande produção de nódulos mineralizados quando comparados ao controle (P<0.05). A análise da SEM mostrou estruturas que sugerem a presença de depósitos de fosfato de cálcio na superfície dos materiais demonstrando bioatividade. O Yb2O3 mostrou ser um agente radiopacificador adequado em cimentos à base de silicato de cálcio uma vez que não afetou as propriedades físico-químicas e biológicas e ainda preservou o potencial bioativo desse material.

Effect of the root canal final rinse protocols on the debris and smear layer removal and on the push-out strength of an epoxy-based sealer.

The aim of the present study was to evaluate the efficacy of QMiX, SmearClear, and 17% EDTA for the debris and smear layer removal from the root canal and its effects on the push-out bond strength of an epoxy-based sealer by scanning electron microscopy (SEM). Forty extracted human canines (n = 10) were assigned to the following final rinse protocols: G1-distilled water (control), G2-17% EDTA, G3-SmearClear, and G4-QMiX. The specimens were submitted to a SEM analysis to evaluate the presence of debris and smear layer, respectively, in the apical or cervical segments. In sequence, forty extracted human maxillary canines with the root canals instrumented were divided into four groups (n = 10) similar to the SEM analysis study. After the filling with AH Plus, the roots were transversally sectioned to obtain dentinal slices. The specimens were submitted to a push-out bond strength test using an electromechanical testing machine. The statistical analysis for the SEM and push-out bond strength studies were performed using the Kruskal-Wallis and Dunn tests (α = 5%). There was no difference among the G2, G3, and G4 efficacy in removing the debris and smear layer (P > 0.05). The efficacy of these groups was superior to the control group. The push-out bond strength values of G2, G3, and G4 were superior to the control group. The ability to remove the debris and smear layer by SmearClear and QMiX was as effective as the 17% EDTA. The final rinse with these solutions promoted similar push-out bond strength values.

Persistence of epoxy-based sealer residues in dentin treated with different chemical removal protocols.

The presence of residual endodontic sealer in the pulp chamber may cause discoloration of the dental crown and interfere with the adhesion of restorative materials. The aim of this study was to compare the efficacy of different solvents in removing residues of an epoxy resin-based sealer (AH Plus) from the dentin walls of the pulp chamber, by scanning electron microscopy (SEM). Forty-four bovine incisor dental crown fragments were treated with 17% EDTA and 2.5% NaOCl. Specimens received a coating of AH Plus and were left undisturbed for 5 min. Then, specimens were divided in four groups (n = 10) and cleaned with one of the following solutions: isopropyl alcohol, 95% ethanol, acetone solution, or amyl acetate solution. Negative controls (n = 2) did not receive AH Plus, while in positive controls (n = 2) the sealer was not removed. AH Plus removal was evaluated by SEM, and a score system was applied. Data were analyzed by Kruskal-Wallis and Dunn tests. None of the solutions tested was able to completely remove AH Plus from the dentin of the pulp chamber. Amyl acetate performed better than 95% ethanol and isopropyl alcohol (p < 0.05), but not better than acetone (p > 0.05) in removing the sealer from dentin. No significant differences were observed between acetone, 95% ethanol, and isopropyl alcohol (p > 0.05). It was concluded that amyl acetate and acetone may be good options for cleaning the pulp chamber after obturation with AH Plus.

Percentage of gutta-percha in mesial canals of mandibular molars obturated by lateral compaction or single cone techniques.

The aim of this study was to compare the percentage of gutta-percha (PGP) in mesial root canals of mandibular molars obturated with LC (Lateral Compaction) or SC (Single Cone) ProTaper Universal System techniques at different levels of the root. Mesial root canals of 20 human permanent molars with similar anatomical characteristics were instrumented using the ProTaper Universal rotary system technique until the F2 instrument, with 20 canals filled by SC ProTaper Universal technique and 20 canals by the LC technique. The mesial roots were sectioned transversely to 3, 5, and 7 mm from the root apex. Digital images of specimens were obtained at MIC-D digital microscope in increases of 30 to 35X. The gutta-percha area was measured using ImageTool software. Data were analyzed using two-way ANOVA and Bonferroni test (α = 0.05). The SC technique provided greater PGP than the LC technique in the apical third (3 mm) (P < 0.001). In the other thirds (5 and 7 mm) there was no statistical difference between the two techniques regarding the PGP (P > 0.05). There was no statistically significant difference between thirds of the root canal for both techniques (P > 0.05). It was concluded that SC technique provided greater PGP than the LC technique in the apical third of mesial root canals of mandibular molars. There was no difference between the two techniques regarding the PGP in the cervical and middle thirds.

Biocompatibility of intracanal medications based on calcium hydroxide.

Objective. The aim of this study was to evaluate the rat subcutaneous tissue reaction to calcium hydroxide-based intracanal medicaments, UltraCal XS (calcium hydroxide, barium sulphate, aqueous matrix), Hydropast (calcium hydroxide, barium sulphate, and propyleneglycol), and Calen (Calcium hydroxide, zinc oxide, colophony, and polyethyleneglycol), used as a control. Methods. Forty-eight rats (Rattus Norvegicus Holtzman) were distributed in three groups: Calen, UltraCal XS, and Hydropast. Polyethylene tubes filled with one of the medicaments were implanted in the dorsal subcutaneous. After 7 and 30 days, the implants were removed and the specimens were fixed and embedded in paraffin. Morphological and quantitative analyses were carried out in the HE-stained sections. The numerical density of inflammatory cells in the capsule was evaluated and statistical analyses were performed (P ≤ 0.05). Results. At 7 days, all materials induced an inflammatory reaction in the subcutaneous tissue adjacent to the implants. In all groups, a significant reduction in the number of inflammatory cells and giant cells was verified in the period of 30 days. Conclusion. These results indicate that the calcium hydroxide-based medicaments evaluated present biocompatibility similar to Calen.

Physicochemical properties of endodontic sealers of different bases.

OBJECTIVE: To assess the setting time (ST), flow (FL), radiopacity (RD), solubility (SB) and dimensional change following setting (DC) of different sealers (AH Plus®, Polifil, Apexit Plus®, Sealapex®, Endométhasone® and Endofill®) according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. MATERIAL AND METHODS: Five samples of each material were used for each test. For ST, cast rings were filled with sealers and tested with a Gilmore needle. For FL, the sealer was placed on a glass plate. After 180 s, another plate with 20 g and a load of 100 g were applied on the material, and the diameters of the discs formed were measured. In RD, circular molds were filled with the sealers, radiographed and analyzed using Digora software. For SB, circular molds were filled with the sealers, a nylon thread was placed inside the material and another glass plate was positioned on the set, pressed and stored at 37°C. Samples were weighed, placed in water, dried and reweighed. The water used for SB was analyzed by atomic absorption spectrometry. For DC, circular molds were filled with the sealers, covered by glass plates and stored at 37°C. Samples were measured and stored in water for 30 days. After this period, they were dryed and measured again. RESULTS: Regarding ST, AH Plus®, Apexit® and Endofil® sealers are in accordance with ANSI/ADA standards. Endométhasone's manufacturer did not mention the ST; Polifil is an experimental sealer and Sealapex® did not set. Considering RD, SB and DC, all sealers were in accordance with ANSI/ADA. The spectrometric analysis showed that a significant amount of K+ and Zn2+ ions was released from Apexit Plus® and Endofill®, respectively. CONCLUSION: Except for DC, all other physicochemical properties of the tested sealers conformed to ANSI/ADA requirements.