RESUMO
Metal organic frameworks (MOFs), which constitute a new class of porous organic-inorganic hybrid materials, have gained considerable attention in the fields of electrochemical energy storage and conversion devices owing to their open topological structures, large surface areas, tunable morphologies, and extreme redox activity. A synthesis protocol that comprises coprecipitation followed by controlled calcination processes to design a battery-type electrode is used. This electrode consists of three-dimensional (3D), ant cave-like polyhedrons of nickel-cobalt alloy on graphitic carbon (GC; NiCo@GC) nanostructures; trimesic acid is used as a potential MOF-linker. The developed NiCo@GC sample exhibits mesoporous characteristics with the maximum surface area of 94.08 m2 g-1 at 77 K. In addition, the redox activity at different sweep rates reveals the battery-type charge storage behavior of the NiCo@GC electrode; its three-electrode assembly provides 444 C g-1 specific capacity at 2 A g-1 with long-term capacity retention. The constructed supercapattery (SC) devices (i.e., AC//NiCo@GC) achieved capacity, specific energy, and specific power are 74.3 mAh g-1 , 39.5 Wh kg-1 , and 665 W kg-1 , respectively. Owing to its reasonable electrochemical characteristics, the prepared NiCo@GC material is a promising candidate for supercapattery electrodes for portable electronic devices.
Assuntos
Estruturas Metalorgânicas , Eletroquímica , Eletrodos , Níquel , OxirreduçãoRESUMO
Water contamination by hazardous organic pollutants poses an extreme threat to the environment and globally endangers aquatic life and human health. Hence, the removal of toxic organic effluents from water sources is necessary to ensure a healthy green environment. To this end, a new class of emerging, visible-light-driven Zn- and Ni-based ternary metal-selenide (Zn1-xNixSe) nanophotocatalysts, with tunable nanostructures via regulation of the stoichiometric ratios of Zn and Ni, were synthesized for efficient water purification by a facile one-pot hydrothermal process. These catalysts exhibit outstanding porous properties, with large surface areas and average particle sizes of around 80 ± 10 nm. The as-prepared ternary Zn1-xNixSe catalysts enable improved optical properties, intrinsic conductivity, bandgap reductions, and large numbers of active sites compared with pristine materials, thereby exhibiting outstanding degradation properties against various dye molecules, including Congo red, methyl orange, and chrome-IV upon visible light irradiation. The improved photodegradation capabilities of the Zn1-xNixSe catalysts may be attributed to the synergistic combinations of Zn and Ni selenides, which in turn minimize the recombination rates of the photogenerated carriers compared to their individual constituents. These findings clearly demonstrate that the proposed ternary Zn1-xNixSe catalysts could be potentially used to remove toxic organic contaminants from industrial wastewater.
Assuntos
Vermelho Congo , Nanoestruturas , Compostos Azo , Corantes , Humanos , Águas Residuárias , ZincoRESUMO
Electrocatalytic splitting of water is the most convincing and straight forward path to extract hydrogen, but the efficiency of this process relies heavily on the catalyst employed. Here, molybdenum sulphoselenophosphide (MoS45.1 Se11.7 P6.1 ) spheroids are reported as an active catalyst for the hydrogen evolution reaction (HER) and this is the first attempt to study on ternary anion based molybdenum chalcogenides. As-prepared MoSx Sey Pz catalyst reveals a unique morphology of microspheroids capped by stretched-out nanoflakes that exhibits excellent electrocatalytic activity (ââ j-10 mA cm-2 @ 93 mV, Tafel slope of 50.1 mV dec-1 , TOF-0.40 s-1 ) fairly closer to the performance of platinum (Pt) and predominant to those of the pre-existing Mo-chalcogenides and phosphides. Such an increase in performance stems from the copious amount of active edge sites, the presence of nanoflakes, and high circumferential area exposed by the spheroids. Besides, the electrode with MoS45.1 Se11.7 P6.1 displays excellent stability in acidic medium over 10 h of continuous operation. This work paves way for improving the catalytic activity of existing Mo-chalcogenide compounds by doping suitable mixed anions and also reveals the integral role of anions as well as their synergetic effects on the surface physiochemical properties and the HER catalysis.
RESUMO
MoS2 is a promising material to replace the Pt catalyst in the electrochemical hydrogen evolution reaction (HER). It is well known that the activity of the MoS2 catalyst in the HER is significantly promoted by doping cobalt atoms. Recently, the Co-Mo-S phase, in which cobalt atoms decorate the edge positions of the MoS2 slabs, has been identified as a co-catalytic phase in the Co-doped MoS2 (Co-MoSx) with low Co content. Here, we report the effect of the incorporation of cobalt atoms in the chemical state of the Co-MoSx catalyst, which gives rise to the co-catalytic effect. Co-MoSx catalysts with various Co contents were prepared on carbon fiber paper by a simple hydrothermal process. On the Co-MoSx catalyst with high Co content (Co/Mo ≈ 2.3), a dramatically higher catalytic activity was observed compared to that for the catalyst with low Co content (Co/Mo ≈ 0.36). Furthermore, the co-catalytic phase in the Co-MoSx catalyst with the high Co content was found not to be the Co-Mo-S phase but was identified as CoS2 by Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and transmission electron microscopy. It is believed that CoS2 is an alternative choice to co-catalyze HER on MoS2-based catalysts.
RESUMO
Recently amorphous MoS2 thin film has attracted great attention as an emerging material for electrochemical hydrogen evolution reaction (HER) catalyst. Here we prepare the amorphous MoS2 catalyst on Au by atomic layer deposition (ALD) using molybdenum hexacarbonyl (Mo(CO)6) and dimethyl disulfide (CH3S2CH3) as Mo and S precursors, respectively. Each active site of the amorphous MoS2 film effectively catalyzes the HER with an excellent turnover frequency of 3 H2/s at 0.215 V versus the reversible hydrogen electrode (RHE). The Tafel slope (47 mV/dec) on the amorphous film suggests the Volmer-Heyrovsky mechanism as a major pathway for the HER in which a primary discharging step (Volmer reaction) for hydrogen adsorption is followed by the rate-determining electrochemical desorption of hydrogen gas (Heyrovsky reaction). In addition, the amorphous MoS2 thin film is electrically evaluated to be rather conductive (0.22 Ω(-1) cm(-1) at room temperature) with a low activation energy of 0.027 eV. It is one of origins for the high catalytic activity of the amorphous MoS2 catalyst.
RESUMO
Amorphous molybdenum sulfide (MoSx) has been identified as an excellent catalyst for the hydrogen evolution reaction (HER). It is still a challenge to prepare amorphous MoSx as a more active and stable catalyst for the HER. Here the amorphous MoSx catalysts are prepared on carbon fiber paper (CFP) substrates at 200 °C by a simple hydrothermal method using molybdic acid and thioacetamide. Because the CFP is intrinsically hydrophobic due to its graphene-like carbon structure, two kinds of hydrophilic pretreatment methods [plasma pretreatment (PP) and electrochemical pretreatment (EP)] are investigated to convert the hydrophobic surface of the CFP to be hydrophilic prior to the hydrothermal growth of MoSx. In the HER catalysis, the MoSx catalysts grown on the pretreated CFPs reach a cathodic current density of 10 mA/cm(2) at a much lower overpotential of 231 mV on the MoSx/EP-CFP and 205 mV on the MoSx/PP-CFP, compared to a high overpotential of 290 mV on the MoSx of the nonpretreated CFP. Turnover frequency per site is also significantly improved when the MoSx are grown on the pretreated CFPs. However, the Tafel slopes of all amorphous MoSx catalysts are in the range of 46-50 mV/dec, suggesting the Volmer-Heyrovsky mechanism as a major pathway for the HER. In addition, regardless of the presence or absence of the pretreatment, the hydrothermally grown MoSx catalyst on CFP exhibits such excellent stability that the degradation of the cathodic current density is negligible after 1000 cycles in a stability test, possibly due to the relatively high growth temperature.
RESUMO
The primary requirements for interfacial adsorption and corrosion inhibition are solubility and the existence of polar functional groups, particularly charges. Traditional organic inhibitors have a solubility issue due to the hydrophobic moieties they incorporate. Most documented organic inhibitors have aromatic rings, hydrocarbon chains, and a few functional groups. The excellent solubility and high efficacy of zwitterions and betaines make them the perfect replacements for insoluble corrosion inhibitors. Zwitterions and betaines are more easily soluble because of interactions between their positive and negative charges (-COO-, -PO3-, -NH3, -NHR2, -NH2R, -SO3- etc.) and the polar solvents. The positive and negative charges also aid these molecules' physical and chemical adsorption at the metal-electrolyte interfaces. They develop a corrosion-inhibiting layer through their adsorption. After becoming adsorbed at the metal-electrolyte interface, they act as mixed-type inhibitors, slowing both cathodic and anodic processes. They usually adsorb according to the Langmuir adsorption isotherm. In this article, the corrosion inhibition potential of zwitterions and betaines in the aqueous phase, as well as their mode of action, are reviewed. This article details the advantages and disadvantages of utilizing zwitterions and betaines for sustainable corrosion protection.
RESUMO
Green and renewable energy is the key to overcoming energy-related challenges such as fossil-fuel depletion and the worsening of environmental habituation. Among the different clean energy sources, hydrogen is considered the most impactful energy carrier and is touted as an alternate fuel for clean energy needs. Even though noble metal catalysts such as Pt, Pd, and Au exhibit excellent hydrogen evolution reaction (HER) activity in acid media, their earth abundance and capital costs are highly debatable. Hence, developing cost-effective, earth-abundant, and conductive electrocatalysts is crucial. In particular, various two-dimensional (2D) transition metal carbides and their compounds are gradually emerging as potential alternatives to noble metal-based catalysts. Owing to their improved hydrophilicity, good conductivity, and large surface areas, these 2D materials show superior stability and excellent catalytic performances during the HER process. This review article is a compilation of the different synthetic protocols, their impact, effects of doping on molybdenum and tungsten carbides and their derivatives, and their application in the HER process. The paper is more focused on the detailed strategies for improving the HER activity, highlights the limits of molybdenum and tungsten carbide-based electrocatalysts in electro-catalytic process, and elaborates on the future advancements expected in this field.
RESUMO
The use of lanthanum-anchored zinc oxide distorted hexagon (La@ZnO DH) nanoclusters as an active material for the photodegradation of rhodamine B (Rh-B) dye via hydrogen bonding, electrostatic, and π-π interactions is examined herein. The active photocatalyst is derived from porous zeolite imidazole frameworks (ZIF-8) via a combined ultrasonication and calcination process. The distorted hexagon nanocluster morphology with controlled surface area is shown to provide excellent catalytic activity, chemical stability and demarcated pore volume. In addition, the low bandgap (3.57 eV) of La@ZnO DH is shown to expand the degradation of Rh-B under irradiation of UV light as compared to the pristine ZIF-8-derived ZnO photocatalyst due to inhibited recombination of electrons and holes. The outstanding physicochemical stability and enhanced performance of La@ZnO DH could be ascribed to the synergistic interaction among La3+ particles and the ZnO nanoclusters and provide a route for their utilization as a promising catalyst for the detoxification of Rh-B.