Photonic chip-based low-noise microwave oscillator.

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low-noise microwave signals are generated by the down-conversion of ultrastable optical references using a frequency comb1-3. Such systems, however, are constructed with bulk or fibre optics and are difficult to further reduce in size and power consumption. In this work we address this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division4,5. Narrow-linewidth self-injection-locked integrated lasers6,7 are stabilized to a miniature Fabry-Pérot cavity8, and the frequency gap between the lasers is divided with an efficient dark soliton frequency comb9. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc Hz-1 at 100 Hz offset frequency that decreases to -135 dBc Hz-1 at 10 kHz offset-values that are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

3D integration enables ultralow-noise isolator-free lasers in silicon photonics.

Photonic integrated circuits are widely used in applications such as telecommunications and data-centre interconnects1-5. However, in optical systems such as microwave synthesizers6, optical gyroscopes7 and atomic clocks8, photonic integrated circuits are still considered inferior solutions despite their advantages in size, weight, power consumption and cost. Such high-precision and highly coherent applications favour ultralow-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format-that is, on a single chip-for photonic integrated circuits to replace bulk optics and fibres. There are two major issues preventing the realization of such envisioned photonic integrated circuits: the high phase noise of semiconductor lasers and the difficulty of integrating optical isolators directly on-chip. Here we challenge this convention by leveraging three-dimensional integration that results in ultralow-noise lasers with isolator-free operation for silicon photonics. Through multiple monolithic and heterogeneous processing sequences, direct on-chip integration of III-V gain medium and ultralow-loss silicon nitride waveguides with optical loss around 0.5 decibels per metre are demonstrated. Consequently, the demonstrated photonic integrated circuit enters a regime that gives rise to ultralow-noise lasers and microwave synthesizers without the need for optical isolators, owing to the ultrahigh-quality-factor cavity. Such photonic integrated circuits also offer superior scalability for complex functionalities and volume production, as well as improved stability and reliability over time. The three-dimensional integration on ultralow-loss photonic integrated circuits thus marks a critical step towards complex systems and networks on silicon.

Microcomb-driven silicon photonic systems.

Microcombs have sparked a surge of applications over the past decade, ranging from optical communications to metrology1-4. Despite their diverse deployment, most microcomb-based systems rely on a large amount of bulky elements and equipment to fulfil their desired functions, which is complicated, expensive and power consuming. By contrast, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner5-7, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh applications. Here we combine these two technologies by using a power-efficient and operationally simple aluminium-gallium-arsenide-on-insulator microcomb source to drive complementary metal-oxide-semiconductor SiPh engines. We present two important chip-scale photonic systems for optical data transmission and microwave photonics, respectively. A microcomb-based integrated photonic data link is demonstrated, based on a pulse-amplitude four-level modulation scheme with a two-terabit-per-second aggregate rate, and a highly reconfigurable microwave photonic filter with a high level of integration is constructed using a time-stretch approach. Such synergy of a microcomb and SiPh integrated components is an essential step towards the next generation of fully integrated photonic systems.

Extending the spectrum of fully integrated photonics to submicrometre wavelengths.

Integrated photonics has profoundly affected a wide range of technologies underpinning modern society1-4. The ability to fabricate a complete optical system on a chip offers unrivalled scalability, weight, cost and power efficiency5,6. Over the last decade, the progression from pure III-V materials platforms to silicon photonics has significantly broadened the scope of integrated photonics, by combining integrated lasers with the high-volume, advanced fabrication capabilities of the commercial electronics industry7,8. Yet, despite remarkable manufacturing advantages, reliance on silicon-based waveguides currently limits the spectral window available to photonic integrated circuits (PICs). Here, we present a new generation of integrated photonics by directly uniting III-V materials with silicon nitride waveguides on Si wafers. Using this technology, we present a fully integrated PIC at photon energies greater than the bandgap of silicon, demonstrating essential photonic building blocks, including lasers, amplifiers, photodetectors, modulators and passives, all operating at submicrometre wavelengths. Using this platform, we achieve unprecedented coherence and tunability in an integrated laser at short wavelength. Furthermore, by making use of this higher photon energy, we demonstrate superb high-temperature performance and kHz-level fundamental linewidths at elevated temperatures. Given the many potential applications at short wavelengths, the success of this integration strategy unlocks a broad range of new integrated photonics applications.

Integrated turnkey soliton microcombs.

Optical frequency combs have a wide range of applications in science and technology1. An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators2-9. Such soliton microcombs10 have been applied to spectroscopy11-13, the search for exoplanets14,15, optical frequency synthesis16, time keeping17 and other areas10. In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs18,19. However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits-as is required in nearly all comb systems-have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si3N4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production.

Heterogeneous quantum dot lasers on low-confinement silicon nitride with reduced-bending architecture.

Low-confinement silicon nitride (SiN) waveguides offer ultra-low losses but require wide bend radii to avoid radiative losses. To realize the benefits of silicon nitride in a heterogeneous laser while maintaining a small footprint, we employ metal-coated etched facets and transversely coupled Fabry-Perot resonators as mirrors. Heterogeneous quantum dot lasers are fabricated using an on-chip facet plus adiabatic taper coupler, and Fabry-Perot cavities are defined by metal mirrors and post-grating-distributed Bragg reflectors (DBRs). Threshold current densities below 250 A/cm2 are observed, and a power >15 mW is measured in an integrating sphere. A laser linewidth of <5 MHz is measured by tuning two lasers to about 50 MHz apart and measuring their beatnote on a photodiode. The total device footprint is <1 mm2.

Coprocessed heterogeneous near-infrared lasers on thin-film lithium niobate.

Thin-film lithium niobate (TFLN) is an attractive platform for photonic applications on account of its wide bandgap, its large electro-optic coefficient, and its large nonlinearity. Since these characteristics are used in systems that require a coherent light source, size, weight, power, and cost can be reduced and reliability enhanced by combining TFLN processing and heterogeneous laser fabrication. Here, we report the fabrication of laser devices on a TFLN wafer and also the coprocessing of five different GaAs-based III-V epitaxial structures, including InGaAs quantum wells and InAs quantum dots. Lasing is observed at wavelengths near 930, 1030, and 1180 nm, which, if frequency-doubled using TFLN, would produce blue, green, and orange visible light. A single-sided power over 25 mW is measured with an integrating sphere.

Investigation of Q degradation in low-loss Si3N4 from heterogeneous laser integration.

High-performance, high-volume-manufacturing Si3N4 photonics requires extremely low waveguide losses augmented with heterogeneously integrated lasers for applications beyond traditional markets of high-capacity interconnects. State-of-the-art quality factors (Q) over 200 million at 1550 nm have been shown previously; however, maintaining high Qs throughout laser fabrication has not been shown. Here, Si3N4 resonator intrinsic Qs over 100 million are demonstrated on a fully integrated heterogeneous laser platform. Qi is measured throughout laser processing steps, showing degradation down to 50 million from dry etching, metal evaporation, and ion implant steps, and controllable recovery to over 100 million from annealing at 250 ∘C-350 ∘C.

An optical-frequency synthesizer using integrated photonics.

Optical-frequency synthesizers, which generate frequency-stable light from a single microwave-frequency reference, are revolutionizing ultrafast science and metrology, but their size, power requirement and cost need to be reduced if they are to be more widely used. Integrated-photonics microchips can be used in high-coherence applications, such as data transmission 1 , highly optimized physical sensors 2 and harnessing quantum states 3 , to lower cost and increase efficiency and portability. Here we describe a method for synthesizing the absolute frequency of a lightwave signal, using integrated photonics to create a phase-coherent microwave-to-optical link. We use a heterogeneously integrated III-V/silicon tunable laser, which is guided by nonlinear frequency combs fabricated on separate silicon chips and pumped by off-chip lasers. The laser frequency output of our optical-frequency synthesizer can be programmed by a microwave clock across 4 terahertz near 1,550 nanometres (the telecommunications C-band) with 1 hertz resolution. Our measurements verify that the output of the synthesizer is exceptionally stable across this region (synthesis error of 7.7 × 10-15 or below). Any application of an optical-frequency source could benefit from the high-precision optical synthesis presented here. Leveraging high-volume semiconductor processing built around advanced materials could allow such low-cost, low-power and compact integrated-photonics devices to be widely used.

Athermal, fabrication-tolerant Si-SiN FIR filters for a silicon photonics foundry platform.

A means of athermalizing unbalanced Mach-Zehnder interferometers on a 300 mm silicon photonics foundry platform utilizing Si and SiN layers to produce the path imbalance is demonstrated. This technique can be applied to all other forms of finite impulse response filters, such as arrayed waveguide gratings. Wafer scale performance of fabricated devices is analyzed for their expected performance in the target application: odd-even channel (de)-interleavers for dense wavelength division multiplexing links. Finally, a method is proposed to improve device performance to be more robust to fabrication variations while simultaneously maintaining athermality.

Subspace tracking for phase noise source separation in frequency combs.

It is widely acknowledged that the phase noise of an optical frequency comb primarily stems from the common mode (carrier-envelope) and the repetition rate phase noise. However, owing to technical noise sources or other intricate intra-cavity factors, residual phase noise components, distinct from the common mode and the repetition rate phase noise, may also exist. We introduce a measurement technique that combines subspace tracking and multi-heterodyne coherent detection for the separation of different phase noise sources. This method allows us to break down the overall phase noise sources associated with a specific comb-line into distinct phase noise components associated with the common mode, the repetition rate and the residual phase noise terms. The measurement method allow us, for the first time, to identify and measure residual phase noise sources of a frequency modulated mode-locked laser.

Heterogeneous integration of a III-V quantum dot laser on high thermal conductivity silicon carbide.

Heat accumulation prevents semiconductor lasers from operating at their full potential. This can be addressed through heterogeneous integration of a III-V laser stack onto non-native substrate materials with high thermal conductivity. Here, we demonstrate III-V quantum dot lasers heterogeneously integrated on silicon carbide (SiC) substrates with high temperature stability. A large T0 of 221 K with a relatively temperature-insensitive operation occurs near room temperature, while lasing is sustained up to 105°C. The SiC platform presents a unique and ideal candidate for realizing monolithic integration of optoelectronics, quantum, and nonlinear photonics.

AlGaAs soliton microcombs at room temperature.

Soliton mode locking in high-Q microcavities provides a way to integrate frequency comb systems. Among material platforms, AlGaAs has one of the largest optical nonlinearity coefficients, and is advantageous for low-pump-threshold comb generation. However, AlGaAs also has a very large thermo-optic effect that destabilizes soliton formation, and femtosecond soliton pulse generation has only been possible at cryogenic temperatures. Here, soliton generation in AlGaAs microresonators at room temperature is reported for the first time, to the best of our knowledge. The destabilizing thermo-optic effect is shown to instead provide stability in the high-repetition-rate soliton regime (corresponding to a large, normalized second-order dispersion parameter D2/κ). Single soliton and soliton crystal generation with sub-milliwatt optical pump power are demonstrated. The generality of this approach is verified in a high-Q silica microtoroid where manual tuning into the soliton regime is demonstrated. Besides the advantages of large optical nonlinearity, these AlGaAs devices are natural candidates for integration with semiconductor pump lasers. Furthermore, the approach should generalize to any high-Q resonator material platform.

The sunflower genome provides insights into oil metabolism, flowering and Asterid evolution.

The domesticated sunflower, Helianthus annuus L., is a global oil crop that has promise for climate change adaptation, because it can maintain stable yields across a wide variety of environmental conditions, including drought. Even greater resilience is achievable through the mining of resistance alleles from compatible wild sunflower relatives, including numerous extremophile species. Here we report a high-quality reference for the sunflower genome (3.6 gigabases), together with extensive transcriptomic data from vegetative and floral organs. The genome mostly consists of highly similar, related sequences and required single-molecule real-time sequencing technologies for successful assembly. Genome analyses enabled the reconstruction of the evolutionary history of the Asterids, further establishing the existence of a whole-genome triplication at the base of the Asterids II clade and a sunflower-specific whole-genome duplication around 29 million years ago. An integrative approach combining quantitative genetics, expression and diversity data permitted development of comprehensive gene networks for two major breeding traits, flowering time and oil metabolism, and revealed new candidate genes in these networks. We found that the genomic architecture of flowering time has been shaped by the most recent whole-genome duplication, which suggests that ancient paralogues can remain in the same regulatory networks for dozens of millions of years. This genome represents a cornerstone for future research programs aiming to exploit genetic diversity to improve biotic and abiotic stress resistance and oil production, while also considering agricultural constraints and human nutritional needs.

Chromosome number is key to longevity of polyploid lineages.

Polyploidy is ubiquitous and often recursive in plant lineages, most frequently resulting in extinction but occasionally associated with great evolutionary success. However, instead of chromosome numbers exponentially increasing due to recurrent polyploidy, most angiosperm species have fewer than 14 chromosome pairs. Following genome duplication, diploidisation can render one copy of essential genes nonfunctional without fitness cost. In isolated subpopulations, alternate (homoeologous) gene copies can be lost, creating incompatibilities that reduce fitness of hybrids between subpopulations, constraining exchange of favourable genetic changes and reducing species fitness. When multiple sets of incompatible genes are genetically linked, their deleterious effects are not independent. The effective number of independently acting sets of incompatible loci in hybrids is limited by chromosome number and recombination. Therefore, species with many chromosomes are subject to a higher fitness penalty during diploidisation. Karyotypic changes, especially fusions, that reduce gene flow are normally fitness disadvantages, but during the diploidisation process, can increase fitness by reducing mixing of differentially diploidised alleles. Fitness penalties caused by diploidisation favour accelerated karyotypic change, with each change increasing barriers to gene flow, contributing to speciation. Lower chromosome numbers and increased chromosome fusions confer advantages to surviving the diploidisation process following polyploid formation, by independent mechanisms.

Integrated photonic high extinction short and long pass filters based on lateral leakage.

In this contribution we present a new approach to achieve high extinction short and long pass wavelength filters in the integrated photonic platform of lithium niobate on insulator. The filtering of unwanted wavelengths is achieved by employing lateral leakage and is related to the bound state in the continuum phenomenon. We show that it is possible to control the filter edge wavelength by adjusting the waveguide dimensions and that an extinction of hundreds of dB/cm is readily achievable. This enabled us to design a pump wavelength suppression of more than 100 dB in a 3.5 mm long waveguide, which is essential for on-chip integration of quantum-correlated photon pair sources. These findings pave the way to integrate multi wavelength experiments on chip for the next generation of photonic integrated circuits.

Seamless multi-reticle photonics.

While Moore's law predicted shrinking transistors would enable exponential scaling of electronic circuits, the footprint of photonic components is limited by the wavelength of light. Thus, future high-complexity photonic integrated circuits (PICs) such as petabit-per-second transceivers, thousand-channel switches, and photonic quantum computers will require more area than a single reticle provides. In our novel approach, we overlay and widen waveguides in adjacent reticles to stitch a smooth transition between misaligned exposures. In SiN waveguides, we measure ultralow loss of 0.0004 dB per stitch, and produce a stitched delay line 23 m in length. We extend the design to silicon channel waveguides, and predict 50-fold lower loss or 50-fold smaller footprint versus a multimode-waveguide-based method. Our approach enables large-scale PICs to scale seamlessly beyond the single-reticle limit.

Scalable multicast hybrid broadband-crossbar wavelength selective switch: proposal and analysis.

In this Letter, we present a new hybrid broadband-crossbar switching network that can switch multiple wavelengths on demand and can also multicast. This switch fabric is an improvement over our previous design in both switch footprint and power consumption, as it reduces the number of switching elements by approximately 50%. We compare the switch loss and crosstalk with that of a multiwavelength selective crossbar switch. We also comment on fabrication tolerance of second-order ring resonators based on experimental results of 64 second-order ring resonators, and more than 250 heaters.

Reaching fiber-laser coherence in integrated photonics.

We self-injection-lock a diode laser to a 1.41 m long, ultra-high Q integrated resonator. The hybrid integrated laser reaches a frequency noise floor of 0.006Hz2/Hz at 4 MHz offset, corresponding to a Lorentzian linewidth below 40 mHz-a record among semiconductor lasers. It also exhibits exceptional stability at low-offset frequencies, with frequency noise of 200Hz2/Hz at 100 Hz offset. Such performance, realized in a system comprised entirely of integrated photonic chips, marks a milestone in the development of integrated photonics; and, for the first time, to the best of our knowledge, exceeds the frequency noise performance of commercially available, high-performance fiber lasers.

Multimode description of self-mode locking in a single-section quantum-dot laser.

This paper describes a theory for mode locking and frequency comb generation by four-wave mixing in a semiconductor quantum-dot active medium. The derivation uses a multimode semiclassical laser theory that accounts for fast carrier collisions within an inhomogeneous distribution of quantum dots. Numerical simulations are presented to illustrate the role of active medium nonlinearities in mode competition, gain saturation, carrier-induced refractive index and creation of combination tones that lead to locking of beat frequencies among lasing modes in the presence of cavity material dispersion.