RESUMO
Natural iron fertilization of the Southern Ocean by windblown dust has been suggested to enhance biological productivity and modulate the climate1-3. Yet, this process has never been quantified across the Southern Ocean and at annual timescales4,5. Here we combined 11 years of nitrate observations from autonomous biogeochemical ocean profiling floats with a Southern Hemisphere dust simulation to empirically derive the relationship between dust-iron deposition and annual net community production (ANCP) in the iron-limited Southern Ocean. Using this relationship, we determined the biological response to dust-iron in the pelagic perennially ice-free Southern Ocean at present and during the last glacial maximum (LGM). We estimate that dust-iron now supports 33% ± 15% of Southern Ocean ANCP. During the LGM, when dust deposition was 5-40-fold higher than today, the contribution of dust to Southern Ocean ANCP was much greater, estimated at 64% ± 13%. We provide quantitative evidence of basin-wide dust-iron fertilization of the Southern Ocean and the potential magnitude of its impact on glacial-interglacial timescales, supporting the idea of the important role of dust in the global carbon cycle and climate6-8.
Assuntos
Ciclo do Carbono , Clima , Poeira , Ferro , Oceanos e Mares , Água do Mar , Poeira/análise , Camada de Gelo , Ferro/análise , Nitratos/análise , Água do Mar/químicaRESUMO
Droughts and climate-change-driven warming are leading to more frequent and intense wildfires1-3, arguably contributing to the severe 2019-2020 Australian wildfires4. The environmental and ecological impacts of the fires include loss of habitats and the emission of substantial amounts of atmospheric aerosols5-7. Aerosol emissions from wildfires can lead to the atmospheric transport of macronutrients and bio-essential trace metals such as nitrogen and iron, respectively8-10. It has been suggested that the oceanic deposition of wildfire aerosols can relieve nutrient limitations and, consequently, enhance marine productivity11,12, but direct observations are lacking. Here we use satellite and autonomous biogeochemical Argo float data to evaluate the effect of 2019-2020 Australian wildfire aerosol deposition on phytoplankton productivity. We find anomalously widespread phytoplankton blooms from December 2019 to March 2020 in the Southern Ocean downwind of Australia. Aerosol samples originating from the Australian wildfires contained a high iron content and atmospheric trajectories show that these aerosols were likely to be transported to the bloom regions, suggesting that the blooms resulted from the fertilization of the iron-limited waters of the Southern Ocean. Climate models project more frequent and severe wildfires in many regions1-3. A greater appreciation of the links between wildfires, pyrogenic aerosols13, nutrient cycling and marine photosynthesis could improve our understanding of the contemporary and glacial-interglacial cycling of atmospheric CO2 and the global climate system.
Assuntos
Monitoramento Ambiental , Eutrofização , Fitoplâncton/crescimento & desenvolvimento , Fitoplâncton/isolamento & purificação , Incêndios Florestais/estatística & dados numéricos , Aerossóis/análise , Aerossóis/química , Atmosfera/química , Austrália , Clorofila A/análise , Imagens de Satélites , Estações do Ano , Fuligem/análiseRESUMO
The micronutrient iron is now recognized to be important in regulating the magnitude and dynamics of ocean primary productivity, making it an integral component of the ocean's biogeochemical cycles. In this Review, we discuss how a recent increase in observational data for this trace metal has challenged the prevailing view of the ocean iron cycle. Instead of focusing on dust as the major iron source and emphasizing iron's tight biogeochemical coupling to major nutrients, a more complex and diverse picture of the sources of iron, its cycling processes and intricate linkages with the ocean carbon and nitrogen cycles has emerged.
Assuntos
Organismos Aquáticos/metabolismo , Ferro/metabolismo , Oceanos e Mares , Água do Mar/química , Ciclo do Carbono , Ciclo do Nitrogênio , Análise Espaço-Temporal , Oligoelementos/metabolismoRESUMO
The monosaccharide anhydrides levoglucosan, mannosan, and galactosan are known as 'fire sugars' as they are powerful proxies used to trace fire events. Despite their increasing use, their application is not completely understood, especially in the context of tracing past fire events using sediment samples. There are many uncertainties about fire sugar formation, partitioning, transport, complexation, and stability along all stages of the source-to-sink pathway. While these uncertainties exist, the efficacy of fire sugars as fire tracers remains limited. This study compared high-resolution fire sugar fluxes in freshwater sediment cores to known fire records in Tasmania, Australia. Past fire events correlated with fire sugar flux increases down-core, with the magnitude of the flux inversely proportional to the distance of the fires from the study site. For the first time, fire sugar ratios (levoglucosan/mannosan, L/M) in aerosols were compared with those in sediments from the same time-period. The L/M ratio in surface sediments (1.42-2.58) were significantly lower than in corresponding aerosols (5.08-15.62). We propose two hypotheses that may explain the lower average L/M of sediments. Firstly, the degradation rate of levoglucosan is higher than mannosan in the water column, sediment-water interface, and/or sediment. Secondly, the L/M ratio of non-atmospheric emissions during fires may be lower than that of atmospheric emissions from the same fire. Due to the uncertainties about transport partitioning (atmospheric versus non-atmospheric emissions) and fire sugar degradation along all stages of the source-to-sink pathway, we advise caution when inferring vegetation type (e.g. softwood, hardwood, or grasses) based purely on fire sugar ratios in sediments (e.g. L/M ratio). Future investigations are required to increase the efficacy of fire sugars as a complimentary, or standalone, fire tracer in sediments.
RESUMO
The ability to trace current and past biomass burning events is important for understanding the links between human activity, fire frequency, and climate. One method of tracing biomass burning is to measure the concentrations of certain monosaccharides anhydrides (MAs), specifically levoglucosan (LEV) and its isomers, mannosan (MAN) and galactosan (GAL), which are products of cellulose and hemicellulose pyrolysis. This work presents a simple extraction method allowing for the rapid, sensitive, and selective determination of MAs in sediments. MAs detection was performed using suppressed ion chromatography with electrospray - triple-stage quadrupole tandem mass spectrometry (IC-TSQ-MS). The extraction method involves ultrasound probe sonication using water as the solvent. Extraction time, amplitude, and sonication mode were optimised. Recoveries higher than 86% for all MAs tested were achieved by applying 70% amplitude in continuous mode for 60 s. Analytical performance of the method included instrumental LODs of 0.10, 0.12 and 0.50 µg L-1 for LEV, MAN and GAL, respectively. No carryover issues, no matrix effect and no co-elution of targeted MAs with other sugars likely present in sediments samples were observed. The developed extraction method was further validated by the analysis of LEV and MAN in NIST® 1649b urban dust reference material and the resulting concentrations were in excellent agreement with previously reported values. MAs quantification in 70 lake sediment samples were carried out with concentrations found to range from 0.009 to 0.390 µg g-1 for LEV and from 0.009 to 0.194 µg g-1 for MAN. Plotting MAs concentrations versus approximate sediment age allowed the reconstruction of recent fire events impacting two locations in the Central Highlands of Tasmania, Australia.
Assuntos
Glucose , Espectrometria de Massas em Tandem , Humanos , Espectrometria de Massas em Tandem/métodos , Glucose/análise , Cromatografia/métodos , Monossacarídeos/análiseRESUMO
A key Earth system science question is the role of atmospheric deposition in supplying vital nutrients to the phytoplankton that form the base of marine food webs. Industrial and vehicular pollution, wildfires, volcanoes, biogenic debris, and desert dust all carry nutrients within their plumes throughout the globe. In remote ocean ecosystems, aerosol deposition represents an essential new source of nutrients for primary production. The large spatiotemporal variability in aerosols from myriad sources combined with the differential responses of marine biota to changing fluxes makes it crucially important to understand where, when, and how much nutrients from the atmosphere enter marine ecosystems. This review brings together existing literature, experimental evidence of impacts, and new atmospheric nutrient observations that can be compared with atmospheric and ocean biogeochemistry modeling. We evaluate the contribution and spatiotemporal variability of nutrient-bearing aerosols from desert dust, wildfire, volcanic, and anthropogenic sources, including the organic component, deposition fluxes, and oceanic impacts.
Assuntos
Ecossistema , Vento , Aerossóis/análise , Atmosfera , Nutrientes , Oceanos e MaresRESUMO
Biomass burning (BB) emissions are a significant source of particles to the atmosphere, especially in the Southern Hemisphere, where the occurrence of anthropogenic and natural wild fires is common. These emissions can threaten human health through increased exposure, whilst simultaneously representing a significant source of trace metals and nutrients to the ocean. One well known method to track BB emissions is through monitoring the atmospheric concentration of specific monosaccharide anhydrides (MAs), specifically levoglucosan and its isomers, mannosan and galactosan. Herein, a new method for the determination of levoglucosan and its isomers in marine and terrestrial aerosol samples is presented, which delivers both high selectivity and sensitivity, through the coupling of ion chromatography and triple quadrupole tandem mass spectrometry. Optimal chromatographic conditions, providing baseline separation for target anhydrosugars in under 8â¯min, were obtained using a Dionex CarboPacâ PA-1 column with an electrolytically generated KOH gradient. To improve the ionisation efficiency for MS detection, an organic make-up solvent was fed into the IC column effluent before the ESI source, and to further increase both sensitivity and selectivity, cationisation of levoglucosan was investigated by adding salts into the make-up solvent, namely, sodium, ammonium and lithium salts. Using positive lithium cationisation with 0.5â¯mM lithium chloride in methanol as the make-up solvent, delivered at a flow rate of 0.02â¯mL min-1, the levoglucosan response was improved by factors of 100 and 10, comparing to negative ionisation and positive sodium cationisation, respectively. Detection was carried out in SRM mode for quantitation and identification, achieving an instrumental LOD of 0.10, 0.12 and 0.5⯵g L-1 for levoglucosan, mannosan and galactosan, respectively. Finally, the method was applied to the analysis of 41 marine and terrestrial aerosol samples from Australia, its surrounding coastal waters and areas within the remote Southern Ocean, covering a large range of BB marker concentrations.
Assuntos
Atmosfera/química , Cromatografia/métodos , Glucose/análogos & derivados , Lítio/química , Espectrometria de Massas em Tandem/métodos , Anidridos/análise , Atmosfera/análise , Austrália , Cátions , Monitoramento Ambiental/métodos , Galactose/análogos & derivados , Galactose/análise , Glucose/análise , Isomerismo , Limite de Detecção , Manose/análogos & derivados , Manose/análise , Monossacarídeos/análise , Padrões de ReferênciaRESUMO
Atmospheric deposition of aerosols to the ocean provides an important pathway for the supply of vital micronutrients, including trace metals. These trace metals are essential for phytoplankton growth, and therefore their delivery to marine ecosystems can strongly influence the ocean carbon cycle. The solubility of trace metals in aerosols is a key parameter to better constrain their potential impact on phytoplankton growth. To date, a wide range of experimental approaches and nomenclature have been used to define aerosol trace metal solubility, making data comparison between studies difficult. Here we investigate and discuss several laboratory leaching protocols to determine the solubility of key trace metals in aerosol samples, namely iron, cobalt, manganese, copper, lead, vanadium, titanium and aluminium. Commonly used techniques and tools are also considered such as enrichment factor calculations and air mass back-trajectory projections and recommendations are given for aerosol field sampling, laboratory processing (including leaching and digestion) and analytical measurements. Finally, a simple 3-step leaching protocol combining commonly used protocols is proposed to operationally define trace metal solubility in aerosols. The need for standard guidelines and protocols to study the biogeochemical impact of atmospheric trace metal deposition to the ocean has been increasingly emphasised by both the atmospheric and oceanographic communities. This lack of standardisation currently limits our understanding and ability to predict ocean and climate interactions under changing environmental conditions.
RESUMO
The isotopes of thorium (Th) and neodymium (Nd) are used as tracers in oceanography, and are key parameters in the international GEOTRACES program. The very low concentrations of Th and Nd as well as the reactive nature of Th isotopes makes the analysis of seawater samples a complex process. Analysis requires time-consuming pre-concentration from over 5â¯L of seawater. We describe a method to simultaneously pre-concentrate dissolved Th and Nd from acidified seawater samples using the Nobias® PA1L chelating resin. Prior to pre-concentration, hydrofluoric acid is added to the sample to stabilise Th, ammonium acetate buffer added (0.05â¯M), pH adjusted to 4.75, and then finally the prepared sample is pumped through the Nobias resin at a rate of 15â¯mlâ¯min-1. Up to 6 samples can be processed simultaneously. Following elution in 3â¯M HNO3, both elements are chromatographically separated and determined using Inductively Coupled Plasma Mass Spectrometry. Oxidation of the sample between all column separation steps, including after the initial Nobias resin, is important for obtaining maximum elemental recoveries. The method has >90% recovery with blank levels typically <10â¯pg for 232Th and <70â¯pg for Nd. Accuracy is excellent, as our reported values generally agree within 1% of the GEOTRACES intercalibration standards. The long-term analysis of these materials also indicates excellent reproducibility. The pre-concentration of Th and Nd using the Nobias resin is a time saving option compared to the widely used iron co-precipitation technique. Sample handling is also reduced, decreasing the risk of sample contamination. The simplicity of our suggested pre-concentration procedure makes it possible to be applied at sea.
RESUMO
Heme b is an iron-containing co-factor in hemoproteins. Heme b concentrations are low (<1 pmol L-1) in iron limited phytoplankton in cultures and in the field. Here, we determined heme b in marine particulate material (>0.7 µm) from the North Atlantic Ocean (GEOVIDE cruise - GEOTRACES section GA01), which spanned several biogeochemical regimes. We examined the relationship between heme b abundance and the microbial community composition, and its utility for mapping iron limited phytoplankton. Heme b concentrations ranged from 0.16 to 5.1 pmol L-1 (median = 2.0 pmol L-1, n = 62) in the surface mixed layer (SML) along the cruise track, driven mainly by variability in biomass. However, in the Irminger Basin, the lowest heme b levels (SML: median = 0.53 pmol L-1, n = 12) were observed, whilst the biomass was highest (particulate organic carbon, median = 14.2 µmol L-1, n = 25; chlorophyll a: median = 2.0 nmol L-1, n = 23) pointing to regulatory mechanisms of the heme b pool for growth conservation. Dissolved iron (DFe) was not depleted (SML: median = 0.38 nmol L-1, n = 11) in the Irminger Basin, but large diatoms (Rhizosolenia sp.) dominated. Hence, heme b depletion and regulation is likely to occur during bloom progression when phytoplankton class-dependent absolute iron requirements exceed the available ambient concentration of DFe. Furthermore, high heme b concentrations found in the Iceland Basin and Labrador Sea (median = 3.4 pmol L-1, n = 20), despite having similar DFe concentrations to the Irminger Basin, were attributed to an earlier growth phase of the extant phytoplankton populations. Thus, heme b provides a snapshot of the cellular activity in situ and could both be used as indicator of iron limitation and contribute to understanding phytoplankton adaptation mechanisms to changing iron supplies.
RESUMO
A seawater preconcentration system (seaFAST) with offline sector-field inductively coupled plasma mass spectrometry (SF-ICP-MS) detection was critically evaluated for ultra-low trace elemental analysis of Southern Ocean samples over a four-year period (2015-2018). The commercially available system employs two Nobias PA1 resin columns for buffer cleaning and sample preconcentration, allowing salt matrix removal with simultaneous extraction of a range of trace elements. With a primary focus on method simplicity and practicality, a range of experimental parameters relevant to oceanographic analysis were considered, including reduction of blank levels (over weeks and years), instrument conditioning, extraction efficiencies over different pH ranges (5.8-6.4), and preconcentration factors (~10-70 times). Conditions were optimised for the analysis of ten important trace elements (Cd, Co, Cu, Fe, Ga, Mn, Ni, Pb, Ti and Zn) in open ocean seawater samples, and included initial pre-cleaning and conditioning of the seaFAST unit for one week before each separate analytical sequence; a controlled narrow buffer pH of 6.20⯱â¯0.02 used for extraction; and a sample preconcentration factor of 10 for (relatively) concentrated rainwater or sea ice, 40 for typical seawater samples, and up to 67 times for seawater samples collected in the remote open ocean such as the Southern Ocean. Method accuracy (both short - days to weeks - and long term - months to years) were evaluated through extensive analysis of a range of oceanographic standard reference samples including SAFe D1 (nâ¯=â¯20), D2 (nâ¯=â¯3), S (nâ¯=â¯15), GEOTRACES GD (nâ¯=â¯6), GSC (nâ¯=â¯42) and GSP (nâ¯=â¯42), as well as NASS-6 (nâ¯=â¯6). Measured values for oceanographic samples were found to agree with consensus values to within ±â¯6% for Cd, Cu, Fe, Ni, Pb and Zn. Offsets were noted for Co (labile fraction only; no UV oxidation), Mn (difference also noted in other recent studies) and Ti (limited reference values). No consensus values currently exist for Ga. Iron and Mn in Southern Ocean samples were also independently verified via flow injection analysis methods (R2 = 0.95, nâ¯=â¯244 (Fe) and 0.92, nâ¯=â¯85 (Mn), paired t-test, pâ¯âª0.05). Precisions over four years were evaluated through analysis of community seawater samples as well as a range of bulk in-house seawaters (3 sources, each n~100) and acid blanks (nâ¯=â¯250), and were typically found to be within 5-8%, depending on analyte and concentration. Values presented here represent one of the largest independent data sets for these reference samples, as well as the most documented comprehensive suite of GSP and GSC values currently available (consensus values have not yet been released). Samples covering a range of salinities (0-60) were investigated to demonstrate method versatility, with excellent recoveries noted using the seaFAST Nobias PA1 column (>98% for most elements, with 70-80% for Ga and Ti). By way of example, data is presented showing the application of the method to samples collected on the Kerguelen plateau in the Indian sector of the Southern Ocean (HEOBI voyage, January-February 2016) and in land-fast ice and brine collected near Davis station, Antarctica, in austral summer 2015 (with a salinity range from 0 to 73â¯gâ¯kg-1). Finally, a range of recommendations for successful implementation of a seaFAST system are provided, along with considerations for future investigation.
RESUMO
Despite recent advances in observational data coverage, quantitative constraints on how different physical and biogeochemical processes shape dissolved iron distributions remain elusive, lowering confidence in future projections for iron-limited regions. Here we show that dissolved iron is cycled rapidly in Pacific mode and intermediate water and accumulates at a rate controlled by the strongly opposing fluxes of regeneration and scavenging. Combining new data sets within a watermass framework shows that the multidecadal dissolved iron accumulation is much lower than expected from a meta-analysis of iron regeneration fluxes. This mismatch can only be reconciled by invoking significant rates of iron removal to balance iron regeneration, which imply generation of authigenic particulate iron pools. Consequently, rapid internal cycling of iron, rather than its physical transport, is the main control on observed iron stocks within intermediate waters globally and upper ocean iron limitation will be strongly sensitive to subtle changes to the internal cycling balance.
RESUMO
Atmospheric deposition is a source of potentially bioavailable iron (Fe) and thus can partially control biological productivity in large parts of the ocean. However, the explanation of observed high aerosol Fe solubility compared to that in soil particles is still controversial, as several hypotheses have been proposed to explain this observation. Here, a statistical analysis of aerosol Fe solubility estimated from four models and observations compiled from multiple field campaigns suggests that pyrogenic aerosols are the main sources of aerosols with high Fe solubility at low concentration. Additionally, we find that field data over the Southern Ocean display a much wider range in aerosol Fe solubility compared to the models, which indicate an underestimation of labile Fe concentrations by a factor of 15. These findings suggest that pyrogenic Fe-containing aerosols are important sources of atmospheric bioavailable Fe to the open ocean and crucial for predicting anthropogenic perturbations to marine productivity.
Assuntos
Ferro/química , Aerossóis , Oceano Atlântico , Atmosfera/química , Poeira , Óxido Ferroso-Férrico/química , Oceano Índico , Modelos Químicos , Concentração Osmolar , Solo/química , SolubilidadeRESUMO
Iron limits phytoplankton growth in large areas of the Southern Ocean. A new study shows that Antarctic krill play a crucial role in the recycling of iron in the iron-limited waters.
Assuntos
Euphausiacea , Ferro/análise , Animais , Regiões Antárticas , Alimentos , FitoplânctonRESUMO
The availability of micronutrients is a key factor that affects primary productivity in High Nutrient Low Chlorophyll (HNLC) regions of the Southern Ocean. Nutrient supply is governed by a range of physical, chemical and biological processes, and there are significant feedbacks within the ecosystem. It has been suggested that baleen whales form a crucial part of biogeochemical cycling processes through the consumption of nutrient-rich krill and subsequent defecation, but data on their contribution are scarce. We analysed the concentration of iron, cadmium, manganese, cobalt, copper, zinc, phosphorus and carbon in baleen whale faeces and muscle, and krill tissue using inductively coupled plasma mass spectrometry. Metal concentrations in krill tissue were between 20 thousand and 4.8 million times higher than typical Southern Ocean HNLC seawater concentrations, while whale faecal matter was between 276 thousand and 10 million times higher. These findings suggest that krill act as a mechanism for concentrating and retaining elements in the surface layer, which are subsequently released back into the ocean, once eaten by whales, through defecation. Trace metal to carbon ratios were also higher in whale faeces compared to whale muscle indicating that whales are concentrating carbon and actively defecating trace elements. Consequently, recovery of the great whales may facilitate the recycling of nutrients via defecation, which may affect productivity in HNLC areas.
Assuntos
Ecossistema , Euphausiacea/metabolismo , Micronutrientes/metabolismo , Baleias/metabolismo , Animais , Carbono/análise , Carbono/metabolismo , Fezes/química , Espectrometria de Massas/métodos , Metais/análise , Metais/metabolismo , Micronutrientes/análise , Músculos/química , Fósforo/análise , Fósforo/metabolismo , Água do Mar/química , Oligoelementos/análise , Oligoelementos/metabolismoRESUMO
A series of laboratory culture experiments was used to investigate the effect of selenium (Se, 0-10 nM) on the growth, cellular volume, photophysiology, and pigments of two temperate and four polar oceanic phytoplankton species [coccolithophore Emiliania huxleyi (Lohmann) W. W. Hay et H. P. Mohler, cyanobacterium Synechococcus sp., prymnesiophyte Phaeocystis sp., and three diatoms-Fragilariopsis cylindrus (Grunow) Kriegar, Chaetoceros sp., and Thalassiosira antarctica G. Karst.]. Only Synechoccocus sp. and Phaeocystis sp. did not show any requirement for Se. Under Se-deficient conditions, the growth rate of E. huxleyi was decreased by 1.6-fold, whereas cellular volume was increased by 1.9-fold. Se limitation also decreased chl a (2.5-fold), maximum relative electron transport rate (1.9-fold), and saturating light intensity (2.8-fold), suggesting that Se plays a role in photosynthesis or high-light acclimation. Pigment analysis for Antarctic taxa provided an interesting counterpoint to the physiology of E. huxleyi. For all Se-dependent Antarctic diatoms, Se limitation decreased growth rate and chl a content, whereas cellular volume was not affected. Pigment analysis revealed that other pigments were affected under Se deficiency. Photoprotective pigments increased by 1.4-fold, while diadinoxanthin:diatoxanthin ratios decreased by 1.5- to 4.9-fold under Se limitation, supporting a role for Se in photoprotection. Our results demonstrate an Se growth requirement for polar diatoms and indicate that Se could play a role in the biogeochemical cycles of other nutrients, such as silicic acid in the Southern Ocean. Se measurements made during the austral summer in the Southern Ocean and Se biological requirement were used to discuss possible Se limitation in phytoplankton from contrasting oceanographic regions.
RESUMO
Trace elements often limit phytoplankton growth in the ocean, and the quantification of particulate forms is essential to fully understand their biogeochemical cycling. There is presently a lack of reliable measurements on the trace elemental content of marine particles, in part due to the inadequacies of the sampling and analytical methods employed. Here we report on the development of a series of state-of-the-art trace metal clean methods to collect and process oceanic particulate material in open-ocean and sea ice environments, including sampling, size-fractionated filtration, particle digestions and analysis by magnetic sector inductively coupled plasma-mass spectrometry (ICP-MS). Particular attention was paid to the analysis of certified reference materials (CRMs) and field blanks, which are typically the limiting factor for the accurate analysis of low concentrations of trace metals in marine particulate samples. Theoretical detection limits (3 s of the blank) were low for all 17 elements considered, and varied according to filter material and porosity (sub-microg L(-1) for polycarbonate filters and 1-2 microg L(-1) for quartz and polyester filters). Analytical accuracy was verified using fresh water CRMs, with excellent recoveries noted (93-103%). Digestion efficiencies for various acid combinations were assessed using sediment and plankton CRMs. Using nitric acid only, good recoveries (79-90%) were achieved for Mo, Cd, Ba, Pb, Mn, Fe, Co, Ni, Cu, Zn and Ga. The addition of HF was necessary for the quantitative recovery of the more refractory trace elements such as U, Al, V and Cr. Bioactive elements such as P can also be analysed and used as a biomass normaliser. Our developed sampling and analytical methods proved reliable when applied during two major field programs in both the open Southern Ocean and Antarctic sea ice environments during the International Polar Year in 2007. Trace elemental data are presented for particulate samples collected in both suspended and sinking marine material, and also within sea ice cores.
RESUMO
The atmospheric deposition of terrestrial dust into the ocean is an important factor in controlling Earth's climate. Aluminium can be used as a tracer for the magnitude and location of dust transported from the land to surface ocean. The element is ideal for this purpose since its primary input is via aeolian dust deposition and it has a short surface water residence time. The accurate determination of dissolved aluminium in seawater is difficult due to the complexity of the matrix and the trace (nanomolar) concentrations at which the metal exists. This paper presents a critical review of the different sampling and analytical methods for the determination of the concentration of aluminium in natural waters, with particular focus on techniques successfully applied to shipboard analysis of seawater.
RESUMO
A flow-injection (FI)-based instrument under LabVIEW control for monitoring iron in marine waters is described. The instrument incorporates a miniature, low-power photomultiplier tube (PMT), and a number of microelectric and solenoid actuated valves and peristaltic pumps. The software allows full control of all flow injection components and processing of the data from the PMT. The optimised system is capable of 20 injections per hour, including preconcentration and wash steps. The detection limit (3 sd of the blank) is 21 pM at sea and the linear range is 21-2000 pM with a 60-second sample load time. Typical precision between replicate FI peaks is 5.9 +/- 3.2 % (n =4) over the linear range.