RESUMO
Development of high-performance, low-cost catalysts for electrochemical water splitting is key to sustainable hydrogen production. Herein, ultrafast synthesis of carbon-supported ruthenium-copper (RuCu/C) nanocomposites is reported by magnetic induction heating, where the rapid Joule's heating of RuCl3 and CuCl2 at 200 A for 10 s produces Ru-Cl residues-decorated Ru nanocrystals dispersed on a CuClx scaffold, featuring effective Ru to Cu charge transfer. Among the series, the RuCu/C-3 sample exhibits the best activity in 1 m KOH toward both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with an overpotential of only -23 and +270 mV to reach 10 mA cm-2, respectively. When RuCu/C-3 is used as bifunctional catalysts for electrochemical water splitting, a low cell voltage of 1.53 V is needed to produce 10 mA cm-2, markedly better than that with a mixture of commercial Pt/C+RuO2 (1.59 V). In situ X-ray absorption spectroscopy measurements show that the bifunctional activity is due to reduction of the Ru-Cl residues at low electrode potentials that enriches metallic Ru and oxidation at high electrode potentials that facilitates the formation of amorphous RuOx. These findings highlight the unique potential of MIH in the ultrafast synthesis of high-performance catalysts for electrochemical water splitting.
RESUMO
Metal chalcogenide nanoparticles play a vital role in a wide range of applications and are typically stabilized by organic derivatives containing thiol, amine, or carboxyl moieties, where the nonconjugated particle-ligand interfaces limit the electronic interactions between the inorganic cores and organic ligands. Herein, a wet-chemistry method is developed for the facile preparation of stable platinum chalcogenide (S, Se) nanoparticles capped with acetylene derivatives (e.g., 4-ethylphenylacetylene, EPA). The formation of Pt-C≡ conjugated bonds at the nanoparticle interfaces, which is confirmed by optical and X-ray spectroscopic measurements, leads to markedly enhanced electronic interactions between the d electrons of the nanoparticle cores and π electrons of the acetylene moiety, in stark contrast to the mercapto-capped counterparts with only nonconjugated Pt-S- interfacial bonds, as manifested in spectroscopic measurements and density functional theory calculations. This study underscores the significance of conjugated anchoring linkages in the stabilization and functionalization of metal chalcogenides, a unique strategy for diverse applications.
RESUMO
Electrochemical hydrogen generation is a rising prospect for future renewable energy storage and conversion. Platinum remains a leading choice of catalyst, but because of its high cost and low natural abundance, it is critical to optimize its use. In the present study, platinum oxide nanoparticles of approximately 2â nm in diameter are deposited on carbon nitride (C3N4) nanosheets by thermal refluxing of C3N4 and PtCl2 or PtCl4 in water. These nanoparticles exhibit apparent electrocatalytic activity toward the hydrogen evolution reaction (HER) in acid. Interestingly, the HER activity increases with increasing Pt4+ concentration in the nanoparticles, and the optimized catalyst even outperforms commercial Pt/C, exhibiting an overpotential of only -7.7â mV to reach the current density of 10â mA cm-2 and a Tafel slope of -26.3â mV dec-1 . The results from this study suggest that the future design of platinum oxide catalysts should strive to maximize the Pt4+ sites and minimize the formation of the less active Pt2+ species.
RESUMO
Hematite (α-Fe2O3) is a promising transition metal oxide for various energy conversion and storage applications due to its advantages of low cost, high abundance, and good chemical stability. However, its low carrier mobility and electrical conductivity have hindered the wide application of hematite-based devices. Fundamentally, this is mainly caused by the formation of small polarons, which show conduction through thermally activated hopping. Atomic doping is one of the most promising approaches for improving the electrical conductivity in hematite. However, its impact on the carrier mobility and electrical conductivity of hematite at the atomic level remains to be illusive. In this work, through a kinetic Monte-Carlo sampling approach for diffusion coefficients combined with carrier concentrations computed under charge neutrality conditions, we obtained the electrical conductivity of the doped hematite. We considered the contributions from individual Fe-O layers, given that the in-plane carrier transport dominates. We then studied how different dopants impact the carrier mobility in hematite using Sn, Ti, and Nb as prototypical examples. We found that the carrier mobility change is closely correlated with the local distortion of Fe-Fe pairs, i.e. the more stretched the Fe-Fe pairs are compared to the pristine systems, the lower the carrier mobility will be. Therefore, elements which limit the distortion of Fe-Fe pair distances from pristine are more desired for higher carrier mobility in hematite. The calculated local structure and pair distribution functions of the doped systems have remarkable agreement with the experimental EXAFS measurements on hematite nanowires, which further validates our first-principles predictions. Our work revealed how dopants impact the carrier mobility and electrical conductivity of hematite and provided practical guidelines to experimentalists on the choice of dopants for the optimal electrical conductivity of hematite and the performance of hematite-based devices.
RESUMO
Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. This is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.
RESUMO
Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.
RESUMO
When conducting EXAFS at the Cu K-edge for ZnS:Cu with very low Cu concentration (<0.04% Cu), a large background was present that increased with energy. This background arises from a Zn X-ray Raman peak, which moves through the Cu fluorescence window, plus the tail of the Zn fluorescence peak. This large background distorts the EXAFS and must be removed separately before reducing the data. A simple means to remove this background is described.
Assuntos
Fluorescência , Cobre/química , Análise Espectral Raman/métodos , Zinco/químicaRESUMO
Doped and alloyed germanium nanocrystals (Ge NCs) are potential candidates for a variety of applications such as photovoltaics and near IR detectors. Recently, bismuth (Bi) as an n-type group 15 element was shown to be successfully and kinetically doped into Ge NCs through a microwave-assisted solution-based synthesis, although Bi is thermodynamically insoluble in bulk crystalline Ge. To expand the composition manipulation of Ge NCs, another more common n-type group 15 element for semiconductors, antimony (Sb), is investigated. Oleylamine (OAm)- and OAm/trioctylphosphine (TOP)-capped Sb-doped Ge NCs have been synthesized by the microwave-assisted solution reaction of GeI2 with SbI3. Passivating the Ge surface with a binary ligand system of OAm/TOP results in formation of consistently larger NCs compared to OAm alone. The TOP coordination on the Ge surface is confirmed by 31P NMR and SEM-EDS. The lattice parameter of Ge NCs increases with increasing Sb concentration (0.00-2.0 mol %), consistent with incorporation of Sb. An increase in the NC diameter with higher content of SbI3 in the reaction is shown by TEM. XPS and EDS confirm the presence of Sb before and after removal of surface ligands with hydrazine and recapping the Ge NC surface with dodecanethiol (DDT). EXAFS analysis suggests that Sb resides within the NCs on highly distorted sites next to a Ge vacancy as well as on the crystallite surface. High Urbach energies obtained from photothermal deflection spectroscopy (PDS) of the films prepared from pristine Ge NC and Sb-doped Ge NCs indicate high levels of disorder, in agreement with EXAFS data. Electrical measurements on TiO2-NC electron- and hole-only devices show an increase in hole conduction, suggesting that the Sb-vacancy defects are behaving as a p-type dopant in the Ge NCs, consistent with the vacancy model derived from the EXAFS results.
RESUMO
Stable water-suspendable Cu+-doped ZnS nanocrystals (NCs) have been synthesized with mercaptopropionic acid (MPA) as a capping molecule. The nanocrystals have been characterized using a combination of experimental techniques including UV-vis and photoluminescence (PL) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), inductively coupled plasma (ICP), and extended X-ray absorption fine structure (EXAFS). The UV-vis electronic absorption spectrum shows an excitonic peak at 310 nm, characteristic of quantum-confined ZnS NCs. This excitonic peak does not change noticeably with Cu+ doping. XRD confirms the formation of ZnS nanocrystals, and the average size of the NCs has been determined to be around 6 nm by TEM. The incorporation of Cu+ into the ZnS is manifested as a substantial red-shift of the emission band in the PL spectra upon addition of Cu2+ that was reduced into Cu+ during the synthesis reaction. EXAFS data were obtained to confirm copper doping as well as determine the local structure about Cu+ and Zn2+ in the NCs. Fitting to the EXAFS data for Cu+ suggests that most Cu+ ions are located near the surface within the ZnS NCs and that a significant fraction may be in the form of CuS as found in bulk material. These combined optical and structural studies have provided important new insight into the relevant electronic energy levels and their correlation to the optical and structural properties of ZnS:Cu,Cl NCs. This has important implications in potential applications of this phosphor material for solid state lighting, imaging, and other photonic devices.
RESUMO
Extended x-ray absorption fine structure (EXAFS) is well-suited for investigations of structure and disorder of complex materials. Recently, experimental measurements and analysis of EXAFS have been carried out to elucidate the mechanisms responsible for the negative thermal expansion (NTE) in zirconium tungstate (ZrW2O8). In contrast to previous work suggesting that transverse O-displacements are largely responsible, the EXAFS analysis suggested that correlated rotations and translations of octahedra and tetrahedra within the structure are a major source. In an effort to resolve this controversy, we have carried out ab initio calculations of the structure, lattice vibrations, and EXAFS of ZrW2O8 based on real-space multiple-scattering calculations using the FEFF9 code and auxiliary calculations of structure and Debye-Waller factors. We find that the theoretical simulations are consistent with observed EXAFS, and show that both of the above mechanisms contribute to the dynamical structure of ZrW2O8.
RESUMO
Lattice distortions corresponding to Ba displacements with respect to the FeAs sublattice are revealed to break the room-temperature tetragonal symmetry in Ba(Fe1-x Cox)2 As2. The displacements yield twin domains of the size of ≈10 nm. The domain size correlates with the magnitude of the local Fe magnetic moment and its non-monotonic dependence on Co concentration.
RESUMO
A local structure study of ZnS nanocrystals, doped with very low concentrations of Cu, was carried out using the EXAFS technique to better understand how Cu substitutes into the host lattice and forms Cu luminescence centers. We show that a large fraction of the Cu have three nearest neighbor S atoms and the Cu-S bond is significantly shortened compared to Zn-S, by â¼0.08 Å. In addition, the second neighbor Cu-Cu peak is extremely small. We propose that Cu occupies an interior site next to a S(2-) vacancy, with the Cu displaced towards the remaining S(2-) and away from the vacancy; such a displacement immediately explains the lack of a significant Cu-Cu peak in the data. There is no evidence for interstitial Cu sites (Cu(i)), indicating that no more than 2% of the Cu are Cu(i.) This study provides new insights into the local structure of the Cu dopant in ZnS without the presence of CuS nanoprecipitates that are present at higher Cu doping levels.
Assuntos
Cobre/química , Nanopartículas Metálicas/química , Sulfetos/química , Compostos de Zinco/química , Espectrometria de Fluorescência , Espectroscopia por Absorção de Raios XRESUMO
We report detailed degradation and rejuvenation studies of AC electroluminescence (EL) of the phosphor ZnS:Cu,Cl, aiming to better understand the physical mechanisms that control EL emission. We find that the AC EL emission spectra vary considerably with the AC driving frequency but all spectra can be fit to a sum of four Gaussians. During degradation, although there is a large overall decrease in amplitude, the shape of the emission spectra measured at a given AC frequency does not change. Annealing the samples after they are significantly degraded can rejuvenate the phosphors with a maximum rejuvenation occurring (for fixed annealing times) near 180 °C. Further, these test cells can be degraded and rejuvenated multiple times. However studies at slightly higher annealing temperatures (240 °C) show significant thermal degradation and, perhaps more importantly, a change in the spectral shape; this likely indicates that two distinct mechanisms are then operative. In extended x-ray absorption fine structure (EXAFS) experiments we find that the CuS nanoprecipitates in the ZnS host (â¼ 75% of the Cu is in the CuS precipitates) do not change significantly after the 240 °C anneal; these experiments also provide a more detailed comparison of the local structure about Cu in pure CuS, and in ZnS:Cu,Cl. In addition, the EXAFS experiments also place an upper limit on the fraction of possible interstitial Cu sites, proposed as a blue emission center, at less than 10%. The combined experiments place strong constraints on the mechanisms for degradation and rejuvenation and suggest that EL degradation is most likely caused by either Cu or Cl diffusion under high E-fields, while thermal diffusion at slightly elevated temperatures without E-fields present, re-randomizes the (isolated) dopant distributions. Higher T anneals appear to damage the sharp tips on the precipitates.
RESUMO
ZnS : Cu,Cl/ZnS core-shell nanocrystals (NCs) have been synthesized via a facile aqueous synthesis method. The shell growth of the NCs was observed via a red-shift in the UV-Vis absorption spectra with increasing NC size. The Cu photoluminescence (PL) emission was enhanced by capping with a thin ZnS shell. The ZnS : Cu (0.2%) and ZnS : Cu (0.5%) show a more pronounced red-shift in the apparent PL peak position as well as a 37% and 67% increase in emission intensity, respectively, in comparison to the undoped NCs. The observed red-shift is mainly due to an increase in intensity of the Cu PL emission. The 1% Cu-doped NCs exhibit very little red-shift because the observed emission is dominated by the Cu-dopant and thus nearly independent of the size of the NCs. The increase in Cu emission is evidence that Cu atoms occupying non-emissive surface sites in doped ZnS NCs were encapsulated by the ZnS shell. Extended X-Ray Absorption Fine Structure (EXAFS) data also suggests that the Cu had slightly more neighbors upon growth of a ZnS shell, indicating its encapsulation into the core of the NCs. The EXAFS Zn edge data also indicate greater disorder in the ZnS structure when the shell is grown, which may be attributed to the ZnS shell being more amorphous than the core NCs. This study demonstrates that core-shell structures can be used as a simple and yet powerful strategy to enhance PL properties of doped semiconductor NCs.