pH Dependence of MRI Contrast in Magnetic Nanoparticle Suspensions Demonstrates Inner-Sphere Relaxivity Contributions and Reveals the Mechanism of Dissolution.

Superparamagnetic iron oxide nanoparticles, MNPs, are under investigation as stimulus-responsive nanocarriers that can be tracked by magnetic resonance imaging. However, fundamental questions remain, including the effect of differing surface chemistries on MR image contrast efficacy (relaxivity), both initially and over time in the biological environment. The effects of pH and ligand type on the relaxivity of electrostatically and sterically stabilized spherical 8.8 nm superparamagnetic MNP suspensions are described. It is shown for the first time that across the pH ranges, within which the particles are fully dispersed, increasing acidity progressively reduces relaxivity for all ligand types. This effect is stronger for electrostatically (citrate or APTES) than for sterically stabilized (PEG5000) MNPs. NMR relaxation profiles (relaxivity as a function of 1H Larmor frequency) identified an inner-sphere effect, arising from the protonation of bare oxide or low-molecular-weight-bound species, as the cause. The suppression is not accounted for by the accepted model (SPM theory) and is contrary to previous reports of increased relaxivity at lower pH for paramagnetic iron oxide nanoparticles. We propose that the suppression arises from the orientation of water molecules, with the oxygen atom facing the surface increasingly preferred with increasing surface protonation. For APTES-stabilized MNPs, pendant amines and the silane layer confer exceptional chemical and colloidal stability at low pH. Dissolution of these particles at pH 1.8 was monitored over several months by combining in situ measurements of relaxation profiles with dynamic light scattering. It was shown that particles are magnetically intact for extended periods until they rapidly dissolve, once the silane layer is breached, in a process that is apparently second order in particle concentration. The findings are of interest for tracking MNP fate, for quantitation, and for retention of magnetic responsiveness in biological settings.

Surface Potential Modulation in Boronate-Functionalized Magnetic Nanoparticles Reveals Binding Interactions: Toward Magnetophoretic Capture/Quantitation of Sugars from Extracellular Matrix.

Phenylboronic acids (BAs) are important synthetic receptors that bind reversibly to cis-diols enabling their use in molecular sensing. When conjugated to magnetic iron oxide nanoparticles, BAs have potential for application in separations and enrichment. Realizing this will require a new understanding of their inherent binding modes and measurement of their binding capacity and their stability in/extractability from complex environments. In this work, 3-aminophenylboronic acid was functionalized to superparamagnetic iron oxide nanoparticles (MNPs, core diameter 8.9 nm) to provide stable aqueous suspensions of functionalized particles (BA-MNPs). The progress of sugar binding and its impact on BA-MNP colloidal stability were monitored through the pH-dependence of hydrodynamic size and zeta potential during incubation with a range of saccharides. This provided the first direct observation of boronate ionization pKa in grafted BA, which in the absence of sugar shifted to a slightly more basic pH than free BA. On exposure to sugar solutions under MNP-limiting conditions, pKa moved progressively to lower pH as maximum capacity was gradually attained. The pKa shift is shown to be greater for sugars with greater BA binding affinity, and on-particle sugar exchange effects were inferred. Colloidal dispersion of BA-MNPs after binding was shown for all sugars at all pHs studied, which enabled facile magnetic extraction of glucose from agarose and cultured extracellular matrix expanded in serum-free media. Bound glucose, quantified following magnetophoretic capture, was found to be proportional to the solution glucose content under glucose-limiting conditions expected for the application. The implications for the development of MNP-immobilized ligands for selective magnetic biomarker capture and quantitation from the extracellular environment are discussed.

A holistic NMR framework to understand environmental impact: Examining the impacts of superparamagnetic iron oxide nanoparticles (SPIONs) in Daphnia magna via imaging, spectroscopy, and metabolomics.

Superparamagnetic iron oxide nanoparticles (SPIONs) are a contaminant of emerging interest, often used in the medical field as an imaging contrast agent, with additional uses in wastewater treatment and as food additives. Although the use of SPIONs is increasing, little research has been conducted on the toxic impacts to living organisms beyond traditional lethal concentration endpoints. Daphnia magna are model organisms for aquatic toxicity testing with a well understood metabolome and high sensitivity to SPIONs. Thus, as environmental concentrations continue to increase, it is becoming critical to understand their sub-lethal toxicity. Due to the paramagnetic nature of SPIONs, a range of potential nuclear magnetic resonance spectroscopy (NMR) experiments are possible, offering the potential to probe the physical location (via imaging), binding (via relaxation weighted spectroscopy), and the biochemical pathways impacted (via in vivo metabolomics). Results indicate binding to carbohydrates, likely chitin in the exoskeleton, along with a decrease in energy metabolites and specific biomarkers of oxidative stress. The holistic NMR framework used here helps provide a more comprehensive understanding of SPIONs impacts on D. magna and showcases NMR's versatility in providing physical, chemical, and biochemical insights.

Spatiotemporally Resolved Heat Dissipation in 3D Patterned Magnetically Responsive Hydrogels.

Multifunctional nanocomposites that exhibit well-defined physical properties and encode spatiotemporally controlled responses are emerging as components for advanced responsive systems, for example, in soft robotics or drug delivery. Here an example of such a system, based on simple magnetic hydrogels composed of iron oxide magnetic nanoflowers and Pluronic F127 that generates heat upon alternating magnetic field irradiation is described. Rules for heat-induction in bulk hydrogels and the heat-dependence on particle concentration, gel volume, and gel exposed surface area are established, and the dependence on external environmental conditions in "closed" as compared to "open" (cell culture) system, with controllable heat jumps, of ∆T 0-12°C, achieved within ≤10 min and maintained described. Furthermore the use of extrusion-based 3D printing for manipulating the spatial distribution of heat in well-defined printed features with spatial resolution <150 µm, sufficiently fine to be of relevance to tissue engineering, is presented. Finally, localized heat induction in printed magnetic hydrogels is demonstrated through spatiotemporally-controlled release of molecules (in this case the dye methylene blue). The study establishes hitherto unobserved control over combined spatial and temporal induction of heat, the applications of which in developing responsive scaffold remodeling and cargo release for applications in regenerative medicine are discussed.

Enhanced Stability and Emission Properties of Perylene Dyes by Surface Tethering: Preparation of Fluorescent Ru Nanoparticle Suspensions by Alkyne Linker Chemistry.

Spherical ruthenium nanoparticles (NPs) with a narrow size distribution were synthesised in ethanol by a facile low-temperature solvothermal process without the assistance of templates, structure-directing agents or post annealing/reduction treatments. Surface passivation with a fluorescent perylene dye (EP), and with silane ligands (ETMS), both initially bearing alkyne groups and subsequently forming vinylidene linkages, provided stable suspensions of the marginally soluble free EP. Quantitative analysis of the suspension gave an estimated EP surface coverage of 15 %, corresponding to an EP/ETMS mole ratio of ≈1:6. Photophysical evaluation of the bound and free dye revealed similar absorption bands and extinction coefficients and improved properties for the bound state, including enhanced fluorescence in the visible range for the bound dye, an extended absorption range into the near-UV providing strong emission in the visible, and significantly improved photostability. The physical basis of the enhanced photophysical properties, potential routes to further improvements and the implications for applications are discussed.

Size-Controlled Nanoparticle Clusters of Narrow Size-Polydispersity Formed Using Multiple Particle Types Through Competitive Stabilizer Desorption to a Liquid-Liquid Interface.

A novel colloidal approach is presented for preparing fully dispersed nanoparticle (NP) assemblies (clusters) of narrow size-polydispersity over a wide range of sizes through irreversible depletion of stabilizing ligands onto a liquid-liquid interface. Unusually, the relative monodispersity of the assemblies continuously improves throughout the process. A detailed kinetics study into the assembly of iron oxide NP clusters shows that the assembly rate decreases with NP concentration, pinpointing the role of the interface in size focusing. A new protocol for identifying initial conditions that enable controlled assembly is described, which allows extension of the approach to multiple NP types, opening up a general route to colloidally processed materials. The process uses cheap materials, it is reproducible, robust, and scaleable, and it allows for selection of both particle and cluster size. In the case of assemblies of magnetic iron oxide NPs, these advantages enable tuning of the magnetic properties of the assemblies for applications such as magnetically targetable MRI-trackable agents in biomedicine.

Polypeptide Polymer Brushes by Light-Induced Surface Polymerization of Amino Acid N-Carboxyanhydrides.

Silicon wafers are decorated with photoamine generator 4,5-dimethoxy-2-nitrobenzyl 3-(triethoxysilyl)propyl carbamate. UV-irradiation in the presence of benzyl-l-glutamate N-carboxyanhydride is carried out, resulting in the release of the surface-bound primary amines, making them viable N-carboxyanhydride (NCA) polymerization initiators. Successful polypeptide grafting is confirmed by water contact angle measurements as well as by ellipsometry, revealing a poly(benzyl-l-glutamate) (PBLG) layer of ≈3 nm. X-ray photoelectron spectroscopy confirms the presence of amide groups in the grafted PBLG while time-of-flight secondary ion mass spectroscopy provides additional evidence for the presence of PBLG on the surface. Evaluation of negative control samples confirms successful UV surface grafting. The approach is thus established as a viable general method for light exposure directable polypeptide functionalization of silicon surfaces.

Development of a silica monolith modified with Fe3O4 nano-particles in centrifugal spin column format for the extraction of phosphorylated compounds.

In this study, citrate-stabilised iron oxide nano-particles (∼16 nm) have been immobilised on commercial silica monolithic centrifugal spin columns (MonoSpin) for the extraction of phosphorylated compounds. Two alternative strategies were adopted involving either direct electrostatic attachment to an aminated MonoSpin (single-layer method) in the first instance, or the use of a layer-by-layer method with poly(diallyldimethylammonium) chloride. Field-emission scanning electron spectroscopy and energy-dispersive X-ray spectroscopy was used for confirming notably higher coverage of nano-particles using the layer-by-layer method (2.49 ± 0.53 wt%) compared with the single-layer method (0.43 ± 0.30 wt%). The modified monolith was used for the selective separation/extraction of adenosine monophosphate, adenosine diphosphate and adenosine triphosphate with elution using a phosphate buffer. A reversed-phase liquid chromatographic assay was used for confirming that adenosine, as a non-phosphorylated control was not retained on the modified MonoSpin devices, whereas recovery of 80% for adenosine monophosphate, 86% for adenosine diphosphate and 82% for adenosine triphosphate was achieved.

The effect of cholesterol on membrane dynamics on different timescales in lipid bilayers from fast field-cycling NMR relaxometry studies of unilamellar vesicles.

The general applicability of fast field-cycling nuclear magnetic resonance relaxometry in the study of dynamics in lipid bilayers is demonstrated through analysis of binary unilamellar liposomes composed of 1,2-dioleoyl-sn-glycero-3-posphocholine (DOPC) and cholesterol. We extend an evidence-based method to simulating the NMR relaxation response, previously validated for single-component membranes, to evaluate the effect of the sterol molecule on local ordering and dynamics over multiple timescales. The relaxometric results are found to be most consistent with the partitioning of the lipid molecules into affected and unaffected portions, rather than a single averaged phase. Our analysis suggests that up to 25 mol%, each cholesterol molecule orders three DOPC molecules, providing experimental backup to the findings of many molecular dynamics studies. A methodology is established for studying dynamics on multiple timescales in unilamellar membranes of more complex compositions.

Structure-dynamics correlations in composite PF127-PEG-based hydrogels; cohesive/hydrophobic interactions determine phase and rheology and identify the role of micelle concentration in controlling 3D extrusion printability.

A library of composite polymer networks (CPNs) were formed by combining Pluronic F127, as the primary gelator, with a range of di-acrylate functionalised PEG polymers, which tune the rheological properties and provide UV crosslinkability. A coarse-grained sol-gel room temperature phase diagram was constructed for the CPN library, which identifies PEG-dependent disruption of micelles as leading to liquefication. Small angle X-ray scattering and rheological measurements provide detailed insight into; (i) micelle-micelle ordering; (ii) micelle-micelle disruption, and; (iii) acrylate-micelle disruption; with contributions that depend on composition, including weak PEG chain length and end group effects. The influence of composition on 3D extrusion printability through modulation of the cohesive/hydrophobic interactions was assessed. It was found that only micelle content provides consistent changes in printing fidelity, controlled largely by printing conditions (pressure and feed rate). Finally, the hydrogels were shown to be UV photo-crosslinkable, which further improves fidelity and structural integrity, and usefully reduces the mesh size. Our results provide a guide for design of 3D-printable CPN inks for future biomedical applications.

Reproducible Synthesis of Biocompatible Albumin Nanoparticles Designed for Intra-articular Administration of Celecoxib to Treat Osteoarthritis.

Osteoarthritis (OA) is the most common form of arthritis, with intra-articular (IA) delivery of therapeutics being the current best option to treat pain and inflammation. However, IA delivery is challenging due to the rapid clearance of therapeutics from the joint and the need for repeated injections. Thus, there is a need for long-acting delivery systems that increase the drug retention time in joints with the capacity to penetrate OA cartilage. As pharmaceutical utility also demands that this is achieved using biocompatible materials that provide colloidal stability, our aim was to develop a nanoparticle (NP) delivery system loaded with the COX-2 inhibitor celecoxib that can meet these criteria. We devised a reproducible and economical method to synthesize the colloidally stable albumin NPs loaded with celecoxib without the use of any of the following conditions: high temperatures at which albumin denaturation occurs, polymer coatings, oils, Class 1/2 solvents, and chemical protein cross-linkers. The spherical NP suspensions were biocompatible, monodisperse with average diameters of 72 nm (ideal for OA cartilage penetration), and they were stable over 6 months at 4 °C. Moreover, the NPs loaded celecoxib at higher levels than those required for the therapeutic response in arthritic joints. For these reasons, they are the first of their kind. Labeled NPs were internalized by primary human articular chondrocytes cultured from the knee joints of OA patients. The NPs reduced the concentration of inflammatory mediator prostaglandin E2 released by the primaries, an indication of retained bioactivity following NP synthesis. Similar results were observed in lipopolysaccharide-stimulated human THP-1 monocytes. The IA administration of these NPs is expected to avoid side-effects associated with oral administration of celecoxib and to maintain a high local concentration in the knee joint over a sustained period. They are now ready for evaluation by IA administration in animal models of OA.

pH control of the electrostatic binding of gold and iron oxide nanoparticles to tobacco mosaic virus.

We report the binding of nanoparticles (NPs) to wild type (unmodified) tobacco mosaic virus (TMV). The viruses are simply mixed with citrate-coated, negatively charged gold and iron oxide nanoparticles (IONPs) in acidic solution. This results in TMV decorated along its whole length by the respective particles. Such a decoration usually requires chemical modification or mutation of TMV (e.g., cysteine residues), but here we simply reduce TMV's natural negative charge by protonation. The particles are protonated to a much smaller extent. This charge-based mechanism does not operate for neutral particles.

Long-circulating magnetoliposomes as surrogates for assessing pancreatic tumour permeability and nanoparticle deposition.

Nanocarriers are candidates for cancer chemotherapy delivery, with growing numbers of clinically-approved nano-liposomal formulations such as Doxil® and Onivyde® (liposomal doxorubicin and irinotecan) providing proof-of-concept. However, their complex biodistribution and the varying susceptibility of individual patient tumours to nanoparticle deposition remains a clinical challenge. Here we describe the preparation, characterisation, and biological evaluation of phospholipidic structures containing solid magnetic cores (SMLs) as an MRI-trackable surrogate that could aid in the clinical development and deployment of nano-liposomal formulations. Through the sequential assembly of size-defined iron oxide nanoparticle clusters with a stabilizing anionic phospholipid inner monolayer and an outer monolayer of independently-selectable composition, SMLs can mimic physiologically a wide range of nano-liposomal carrier compositions. In patient-derived xenograft models of pancreatic adenocarcinoma, similar tumour deposition of SML and their nano-liposomal counterparts of identical bilayer composition was observed in vivo, both at the tissue level (fluorescence intensities of 1.5 × 108 ± 1.8 × 107 and 1.2 × 108 ± 6.3 × 107, respectively; ns, 99% confidence interval) and non-invasively using MR imaging. We observed superior capabilities of SML as a surrogate for nano-liposomal formulations as compared to other clinically-approved iron oxide nano-formulations (ferumoxytol). In combination with diagnostic and therapeutic imaging tools, SMLs have high clinical translational potential to predict nano-liposomal drug carrier deposition and could assist in stratifying patients into treatment regimens that promote optimal tumour deposition of nanoparticulate chemotherapy carriers. STATEMENT OF SIGNIFICANCE: Solid magnetoliposomes (SMLs) with compositions resembling that of FDA-approved agents such as Doxil® and Onivyde® offer potential application as non-invasive MRI stratification agents to assess extent of tumour deposition of nano-liposomal therapeutics prior to administration. In animals with pancreatic adenocarcinoma (PDAC), SML-PEG exhibited (i) tumour deposition comparable to liposomes of the same composition; (ii) extended circulation times, with continued tumour deposition up to 24 hours post-injection; and (iii) MRI capabilities to determine tumour deposition up to 1 week post-injection, and confirmation of patient-to-patient variation in nanoparticulate deposition in tumours. Hence SMLs with controlled formulation are a step towards non-invasive MRI stratification approaches for patients, enabled by evaluation of the extent of deposition in tumours prior to administration of nano-liposomal therapeutics.

An In Vitro and Ex Vivo Analysis of the Potential of GelMA Hydrogels as a Therapeutic Platform for Preclinical Spinal Cord Injury.

Spinal cord injury (SCI) is a devastating condition with no curative therapy currently available. Immunomodulation can be applied as a therapeutic strategy to drive alternative immune cell activation and promote a proregenerative injury microenvironment. Locally injected hydrogels carrying immunotherapeutic cargo directly to injured tissue offer an encouraging treatment approach from an immunopharmacological perspective. Gelatin methacrylate (GelMA) hydrogels are promising in this regard, however, detailed analysis on the immunogenicity of GelMA in the specific context of the SCI microenvironment is lacking. Here, the immunogenicity of GelMA hydrogels formulated with a translationally relevant photoinitiator is analyzed in vitro and ex vivo. 3% (w/v) GelMA, synthesized from gelatin type-A, is first identified as the optimal hydrogel formulation based on mechanical properties and cytocompatibility. Additionally, 3% GelMA-A does not alter the expression profile of key polarization markers in BV2 microglia or RAW264.7 macrophages after 48 h. Finally, it is shown for the first time that 3% GelMA-A can support the ex vivo culture of primary murine organotypic spinal cord slices for 14 days with no direct effect on glial fibrillary acidic protein (GFAP+ ) astrocyte or ionized calcium-binding adaptor molecule 1 (Iba-1+ ) microglia reactivity. This provides evidence that GelMA hydrogels can act as an immunotherapeutic hydrogel-based platform for preclinical SCI.

Nuclear spin relaxation in aqueous paramagnetic ion solutions.

A Brownian shell model describing the random rotational motion of a spherical shell of uniform particle density is presented and validated by molecular dynamics simulations. The model is applied to proton spin rotation in aqueous paramagnetic ion complexes to yield an expression for the Larmor-frequency-dependent nuclear magnetic resonance spin-lattice relaxation rate T_{1}^{-1}(ω) describing the dipolar coupling of the nuclear spin of the proton with the electronic spin of the ion. The Brownian shell model provides a significant enhancement to existing particle-particle dipolar models without added complexity, allowing fits to experimental T_{1}^{-1}(ω) dispersion curves without arbitrary scaling parameters. The model is successfully applied to measurements of T_{1}^{-1}(ω) from aqueous manganese(II), iron(III), and copper(II) systems where the scalar coupling contribution is known to be small. Appropriate combinations of Brownian shell and translational diffusion models, representing the inner and outer sphere relaxation contributions, respectively, are shown to provide excellent fits. Quantitative fits are obtained to the full dispersion curve of each aquoion with just five fit parameters, with the distance and time parameters each taking a physically justifiable numerical value.

Growth and differentiation of human induced pluripotent stem cell (hiPSC)-derived kidney organoids using fully synthetic peptide hydrogels.

Human induced pluripotent stem cell (hiPSC)-derived kidney organoids have prospective applications ranging from basic disease modelling to personalised medicine. However, there remains a necessity to refine the biophysical and biochemical parameters that govern kidney organoid formation. Differentiation within fully-controllable and physiologically relevant 3D growth environments will be critical to improving organoid reproducibility and maturation. Here, we matured hiPSC-derived kidney organoids within fully synthetic self-assembling peptide hydrogels (SAPHs) of variable stiffness (storage modulus, G'). The resulting organoids contained complex structures comparable to those differentiated within the animal-derived matrix, Matrigel. Single-cell RNA sequencing (scRNA-seq) was then used to compare organoids matured within SAPHs to those grown within Matrigel or at the air-liquid interface. A total of 13,179 cells were analysed, revealing 14 distinct clusters. Organoid compositional analysis revealed a larger proportion of nephron cell types within Transwell-derived organoids, while SAPH-derived organoids were enriched for stromal-associated cell populations. Notably, differentiation within a higher G' SAPH generated podocytes with more mature gene expression profiles. Additionally, maturation within a 3D microenvironment significantly reduced the derivation of off-target cell types, which are a known limitation of current kidney organoid protocols. This work demonstrates the utility of synthetic peptide-based hydrogels with a defined stiffness, as a minimally complex microenvironment for the selected differentiation of kidney organoids.

Magnetic Chitosan Bionanocomposite Films as a Versatile Platform for Biomedical Hyperthermia.

Responsive magnetic nanomaterials offer significant advantages for innovative therapies, for instance, in cancer treatments that exploit on-demand delivery on alternating magnetic field (AMF) stimulus. In this work, biocompatible magnetic bionanocomposite films are fabricated from chitosan by film casting with incorporation of magnetite nanoparticles (MNPs) produced by facile one pot synthesis. The influence of synthesis conditions and MNP concentration on the films' heating efficiency and heat dissipation are evaluated through spatio-temporal mapping of the surface temperature changes by video-thermography. The cast films have a thickness below 100 µm, and upon exposure to AMF (663 kHz, 12.8 kA m-1 ), induce exceptionally strong heating, reaching a maximum temperature increase of 82 °C within 270 s irradiation. Further, it is demonstrated that the films can serve as substrates that supply heat for multiple hyperthermia scenarios, including: i) non-contact automated heating of cell culture medium, ii) heating of gelatine-based hydrogels of different shapes, and iii) killing of cancerous melanoma cells. The films are versatile components for non-contact stimulus with translational potential in multiple biomedical applications.

Self-assembly of LiMo3Se3 nanowire networks from nanoscale building-blocks in solution.

LiMo(3)Se(3) is a highly anisotropic solid comprised of a regular pattern of quasi-1-D wire-like structures. Solutions of LiMo(3)Se(3) deposited on substrates and TEM grids reveal the presence of two-dimensional network morphologies. High resolution STEM imaging reveals that the junctions within these networks are not formed by discrete overlying LiMo(3)Se(3) fibers or wires. Rather the junctions are continuous in that the wires are seamlessly interwoven from one bundle to the next. We investigated network formation by dynamic light scattering and AFM and demonstrate that the networks are not pre-existent in solution but rather form via self-assembly of nanoscale building blocks that is driven by solvent evaporation.

Emerging Magnetic Fabrication Technologies Provide Controllable Hierarchically-Structured Biomaterials and Stimulus Response for Biomedical Applications.

Multifunctional nanocomposites which exhibit well-defined physical properties and encode spatiotemporally-controlled responses are emerging as components for advanced responsive systems. For biomedical applications magnetic nanocomposite materials have attracted significant attention due to their ability to respond to spatially and temporally varying magnetic fields. The current state-of-the-art in development and fabrication of magnetic hydrogels toward biomedical applications is described. There is accelerating progress in the field due to advances in manufacturing capabilities. Three categories can be identified: i) Magnetic hydrogelation, DC magnetic fields are used during solidification/gelation for aligning particles; ii) additive manufacturing of magnetic materials, 3D printing technologies are used to develop spatially-encoded magnetic properties, and more recently; iii) magnetic additive manufacturing, magnetic responses are applied during the printing process to develop increasingly complex structural arrangement that may recapitulate anisotropic tissue structure and function. The magnetic responsiveness of conventionally and additively manufactured magnetic hydrogels are described along with recent advances in soft magnetic robotics, and the categorization is related to final architecture and emergent properties. Future challenges and opportunities, including the anticipated role of combinatorial approaches in developing 4D-responsive functional materials for tackling long-standing problems in biomedicine including production of 3D-specified responsive cell scaffolds are discussed.

Functional hydrogels as therapeutic tools for spinal cord injury: New perspectives on immunopharmacological interventions.

Spinal cord injury (SCI) is a complex medical and psychological challenge for which there is no curative therapy currently available. Despite major progress in pharmacological and surgical approaches, clinical trials for SCI patients have been uniformly disappointing thus far as there are many practical and biological issues yet to be resolved. Neuroinflammation is a critical event of the secondary injury phase after SCI, and recent research strategies have focused on modulating the immune response after injury to provide a more favorable recovery environment. Biomaterials can serve this purpose by providing physical and trophic support to the injured spinal cord after SCI. Of all potential biomaterials, functional hydrogels are emerging as a key component in novel treatment strategies for SCI, including controlled and localized delivery of immunomodulatory therapies to drive polarization of immune cells towards a pro-regenerative phenotype. Here, we extensively review recent developments in the use of functional hydrogels as immunomodulatory therapies for SCI. We briefly describe physicochemical properties of hydrogels and demonstrate how advanced fabrication methods lead to the required heterogeneity and hierarchical arrangements that increasingly mimic complex spinal cord tissue. We then summarize potential SCI therapeutic modalities including: (i) hydrogels alone; (ii) hydrogels as cellular or (iii) bioactive molecule delivery vehicles, and; (iv) combinatorial approaches. By linking the structural properties of hydrogels to their functions in treatment with particular focus on immunopharmacological stimuli, this may accelerate further development of functional hydrogels for SCI, and indeed next-generation central nervous system regenerative therapies.