Acceleration of Biexciton Radiative Recombination at Low Temperature in CdSe Nanoplatelets.

Colloidal semiconductor nanocrystals offer bandgap tunability, high photoluminescence quantum yield, and colloidal processing of benefit to optoelectronics, however rapid nonradiative Auger recombination (AR) deleteriously affects device efficiencies at elevated excitation intensities. AR is understood to transition from temperature-dependent behavior in bulk semiconductors to temperature-independent behavior in zero-dimensional quantum dots (QDs) as a result of discretized band structure that facilitates satisfaction of linear momentum conservation. For nanoplatelets (NPLs), two-dimensional morphology renders prediction of photophysical behaviors challenging. Here, we investigate and compare the temperature dependence of excited-stated lifetime and fluence-dependent emission of CdSe NPLs and QDs. For NPLs, upon temperature reduction, biexciton lifetime surprisingly decreases (even becoming shorter lived than trion emission) and emission intensity increases nearly linearly with fluence rather than saturating, consistent with dominance of radiative recombination rather than AR. CdSe NPLs thus differ fundamentally from core-only QDs and foster increased utility of photogenerated excitons and multiexcitons at low temperatures.

Elusive Double Perovskite Iodides: Structural, Optical, and Magnetic Properties.

Halide double perovskites [A2 MI MIII X6 ] are an important class of materials that have garnered substantial interest as non-toxic alternatives to conventional lead iodide perovskites for optoelectronic applications. While numerous studies have examined chloride and bromide double perovskites, reports of iodide double perovskites are rare, and their definitive structural characterization has not been reported. Predictive models have aided us here in the synthesis and characterization of five iodide double perovskites of general formula Cs2 NaLnI6 (Ln=Ce, Nd, Gd, Tb, Dy). The complete crystal structures, structural phase transitions, optical, photoluminescent, and magnetic properties of these compounds are reported.

Anisotropic Transient Disordering of Colloidal, Two-Dimensional CdSe Nanoplatelets upon Optical Excitation.

Nanoplatelets (NPLs)-colloidally synthesized, spatially anisotropic, two-dimensional semiconductor quantum wells-are of intense interest owing to exceptionally narrow transition line widths, coupled with solution processability and bandgap tunability. However, given large surface areas and undercoordinated bonding at facet corners and edges, excitation under sufficient intensities may induce anisotropic structural instabilities that impact desired properties. We employ time-resolved X-ray diffraction to study the crystal structure of CdSe NPLs in response to optical excitation. Photoexcitation induces greater out-of-plane than in-plane disordering in 4 and 5 monolayer (ML) NPLs, while 3 ML NPLs display the opposite behavior. Recovery dynamics suggest that out-of-plane cooling slightly outpaces in-plane cooling in 5 ML NPLs with recrystallization occurring on indistinguishable time scales. In comparison, for zero-dimensional CdSe nanocrystals, disordering is isotropic and recovery is faster. These results favor the use of NPLs in optoelectronic applications, where they are likely to exhibit superior performance over traditional, zero-dimensional nanocrystals.

Area and thickness dependence of Auger recombination in nanoplatelets.

The ability to control both the thickness and the lateral dimensions of colloidal nanoplatelets offers a test-bed for area and thickness dependent properties in 2D materials. An important example is Auger recombination, which is typically the dominant process by which multiexcitons decay in nanoplatelets. Herein, we uncover fundamental properties of biexciton decay in nanoplatelets by comparing the Auger recombination lifetimes based on interacting and noninteracting formalisms with measurements based on transient absorption spectroscopy. Specifically, we report that electron-hole correlations in the initial biexcitonic state must be included in order to obtain Auger recombination lifetimes in agreement with experimental measurements and that Auger recombination lifetimes depend nearly linearly on the lateral area and somewhat more strongly on the thickness of the nanoplatelet. We also connect these scalings to those of the area and thickness dependencies of single exciton radiative recombination lifetimes, exciton coherence areas, and exciton Bohr radii in these quasi-2D materials.

Single-crystal Ih ice surfaces unveil connection between macroscopic and molecular structure.

Physics and chemistry of ice surfaces are not only of fundamental interest but also have important impacts on biological and environmental processes. As ice surfaces-particularly the two prism faces-come under greater scrutiny, it is increasingly important to connect the macroscopic faces with the molecular-level structure. The microscopic structure of the ubiquitous ice Ih crystal is well-known. It consists of stacked layers of chair-form hexagonal rings referred to as molecular hexagons. Crystallographic unit cells can be assembled into a regular right hexagonal prism. The bases are labeled crystallographic hexagons. The two hexagons are rotated 30° with respect to each other. The linkage between the familiar macroscopic shape of hexagonal snowflakes and either hexagon is not obvious per se. This report presents experimental data directly connecting the macroscopic shape of ice crystals and the microscopic hexagons. Large ice single crystals were used to fabricate samples with the basal, primary prism, or secondary prism faces exposed at the surface. In each case, the same sample was used to capture both a macroscopic etch pit image and an electron backscatter diffraction (EBSD) orientation density function (ODF) plot. Direct comparison of the etch pit image and the ODF plot compellingly connects the macroscopic etch pit hexagonal profile to the crystallographic hexagon. The most stable face at the ice-water interface is the smallest area face at the ice-vapor interface. A model based on the molecular structure of the prism faces accounts for this switch.

Disphenoidal Zero-Dimensional Lead, Tin, and Germanium Halides: Highly Emissive Singlet and Triplet Self-Trapped Excitons and X-ray Scintillation.

Low-dimensional metal halides have been researched as optoelectronic materials for the past two decades. Zero-dimensional halides of ns2 elements (Sn, Pb, Sb) have recently gained attention as highly efficient broadband light emitters. These compounds comprise discrete metal halide centers, isolated by bulky organic cations. Herein, we report isostructural halide complexes of Ge(II), Sn(II), and Pb(II) with a 1-butyl-1-methyl-piperidinium cation (Bmpip), featuring unusual disphenoidal coordination with a highly stereoactive lone pair. Spectrally broad, bright emission from highly localized excitons, with quantum efficiencies of up to 75%, is observed in blue to red spectral regions for bromides (for Pb, Sn, and Ge, respectively) and extends into the near-infrared for Bmpip2SnI4 (peak at 730 nm). In the case of Sn(II) and Ge(II), both singlet and triplet excitonic emission bands have been observed. Furthermore, Bmpip2SnBr4 and Bmpip2PbBr4 exhibit X-ray-excited luminescence (radioluminescence) with brightness being commensurate with that of a commercial inorganic X-ray scintillator (NaI:Tl).

Synthesis of Type I PbSe/CdSe Dot-on-Plate Heterostructures with Near-Infrared Emission.

Zero-dimensional PbSe quantum dots are heterogeneously nucleated and grown onto two-dimensional zincblende CdSe nanoplatelets. Electron microscopy shows ad-grown dots predominantly decorate edges and corners of the nanoplatelets. Spectroscopic characterizations relate type I electronic alignment as demonstrated via photoluminescence excitation spectroscopy enhancement of near-infrared emission. Transient photoluminescence and absorption convey ultrafast transfer of excitons to the lower energy semiconductor dots. These structures combine benefits of large absorption cross sections of nanoplatelets and efficient near-infrared emission of PbSe with quantum confinement tuning of energy gap.

Emissive Single-Crystalline Boroxine-Linked Colloidal Covalent Organic Frameworks.

The synthesis of periodic two-dimensional (2D) polymers and characterization of their optoelectronic behaviors are challenges at the forefront of polymer chemistry and materials science. Recently, we showed that layered 2D polymers known as 2D covalent organic frameworks (COFs) can be synthesized as single crystals by preparing COF particles as colloidal suspensions. Here we expand this approach from the condensation of boronic acids and catechols to the dehydrative trimerization of polyboronic acids. The resulting boroxine-linked colloids are the next class of 2D COFs to be obtained as single-crystalline particles, as demonstrated here for four 2D COFs and one 3D COF. Colloidal stabilization enables detailed structural analysis by synchrotron X-ray diffraction and high-resolution transmission electron microscopy. Solution fluorescence spectroscopy revealed that the COF crystallites are highly emissive compared to their respective monomer solutions. Excitation-emission matrix fluorescence spectroscopy indicated that the origin of this enhanced emission can be attributed to through-space communication of chromophores between COF sheets. These observations will motivate the development of colloidal COF systems as a platform to organize functional aromatic systems into precise and predictable assemblies with emergent properties.

Homogeneous ice nucleation rates and crystallization kinetics in transiently-heated, supercooled water films from 188 K to 230 K.

The crystallization kinetics of transiently heated, nanoscale water films were investigated for 188 K < Tpulse < 230 K, where Tpulse is the maximum temperature obtained during a heat pulse. The water films, which had thicknesses ranging from approximately 15-30 nm, were adsorbed on a Pt(111) single crystal and heated with ∼10 ns laser pulses, which produced heating and cooling rates of ∼109-1010 K/s in the adsorbed water films. Because the ice growth rates have been measured independently, the ice nucleation rates could be determined by modeling the observed crystallization kinetics. The experiments show that the nucleation rate goes through a maximum at T = 216 K ± 4 K, and the rate at the maximum is 1029±1 m-3 s-1. The maximum nucleation rate reported here for flat, thin water films is consistent with recent measurements of the nucleation rate in nanometer-sized water drops at comparable temperatures. However, the nucleation rate drops rapidly at lower temperatures, which is different from the nearly temperature-independent rates observed for the nanometer-sized drops. At T ∼ 189 K, the nucleation rate for the current experiments is a factor of ∼104-5 smaller than the rate at the maximum. The nucleation rate also decreases for Tpulse > 220 K, but the transiently heated water films are not very sensitive to the smaller nucleation rates at higher temperatures. The crystallization kinetics are consistent with a "classical" nucleation and growth mechanism indicating that there is an energetic barrier for deeply supercooled water to convert to ice.

Semiconductor Nanoplatelet Excimers.

Excimers, a portmanteau of "excited dimer", are transient species that are formed from the electronic interaction of a fluorophore in the excited state with a neighbor in the ground state, which have found extensive use as laser gain media. Although common in molecular fluorophores, this work presents evidence for the formation of excimers in a new class of materials: atomically precise two-dimensional semiconductor nanoplatelets. Colloidal nanoplatelets of CdSe display two-color photoluminescence resolved at low temperatures with one band attributed to band-edge fluorescence and a second, red band attributed to excimer fluorescence. Previously reasonable explanations for two-color fluorescence, such as charging, are shown to be inconsistent with additional evidence. As with excimers in other materials systems, excimer emission is increased by increasing nanoplatelet concentration and the degree of cofacial stacking. Consistent with their promise as low-threshold gain media, amplified spontaneous emission emerges from the excimer emission line.

Material Dimensionality Effects on Electron Transfer Rates Between CsPbBr3 and CdSe Nanoparticles.

Films containing mixtures of zero- or two-dimensional nanostructures (quantum dots or nanoplatelets) were prepared in order to investigate the impacts of dimensionality on electronic interactions. Electron transfer from CsPbBr3 to CdSe was observed in all of the mixtures, regardless of particle dimensionality, and characterized via both static and transient absorption and photoluminescence spectroscopies. We find that mixtures containing nanoplatelets as the electron acceptor (CdSe) undergo charge transfer more rapidly than those containing quantum dots. We believe the faster charge transfer observed with nanoplatelets may arise from the extended spatial area of the CdSe nanoplatelets and/or the continuous density of acceptor states that are present in nanoplatelets. These results bolster the use of one- or two-dimensional nanomaterials in the place of zero-dimensional quantum dots in the design of related optoelectronic devices such as solar cells, light-emitting diodes, and photocatalysts and further offer the prospect of fewer required hopping events to transport carriers due to the larger spatial extent of the particles.

Producing desired ice faces.

The ability to prepare single-crystal faces has become central to developing and testing models for chemistry at interfaces, spectacularly demonstrated by heterogeneous catalysis and nanoscience. This ability has been hampered for hexagonal ice, Ih--a fundamental hydrogen-bonded surface--due to two characteristics of ice: ice does not readily cleave along a crystal lattice plane and properties of ice grown on a substrate can differ significantly from those of neat ice. This work describes laboratory-based methods both to determine the Ih crystal lattice orientation relative to a surface and to use that orientation to prepare any desired face. The work builds on previous results attaining nearly 100% yield of high-quality, single-crystal boules. With these methods, researchers can prepare authentic, single-crystal ice surfaces for numerous studies including uptake measurements, surface reactivity, and catalytic activity of this ubiquitous, fundamental solid.

Light-Induced Transient Lattice Dynamics and Metastable Phase Transition in CH3NH3PbI3 Nanocrystals.

Methylammonium lead iodide (MAPbI3) perovskite nanocrystals (NCs) offer desirable optoelectronic properties with prospective utility in photovoltaics, lasers, and light-emitting diodes (LEDs). Structural rearrangements of MAPbI3 in response to photoexcitation, such as lattice distortions and phase transitions, are of particular interest, as these engender long carrier lifetime and bolster carrier diffusion. Here, we use variable temperature X-ray diffraction (XRD) and synchrotron-based transient X-ray diffraction (TRXRD) to investigate lattice response following ultrafast optical excitation. MAPbI3 NCs are found to slowly undergo a phase transition from the tetragonal to a pseudocubic phase over the course of 1 ns under 0.02-4.18 mJ/cm2 fluence photoexcitation, with apparent nonthermal lattice distortions attributed to polaron formation. Lattice recovery exceeds time scales expected for both carrier recombination and thermal dissipation, indicating meta-stability likely due to the proximal phase transition, with symmetry-breaking along equatorial and axial directions. These findings are relevant for fundamental understanding and applications of structure-function properties.

Gain roll-off in cadmium selenide colloidal quantum wells under intense optical excitation.

Colloidal quantum wells, or nanoplatelets, show among the lowest thresholds for amplified spontaneous emission and lasing among solution-cast materials and among the highest modal gains of any known materials. Using solution measurements of colloidal quantum wells, this work shows that under photoexcitation, optical gain increases with pump fluence before rolling off due to broad photoinduced absorption at energies lower than the band gap. Despite the common occurrence of gain induced by an electron-hole plasma found in bulk materials and epitaxial quantum wells, under no measurement conditions was the excitonic absorption of the colloidal quantum wells extinguished and gain arising from a plasma observed. Instead, like gain, excitonic absorption reaches a minimum intensity near a photoinduced carrier sheet density of 2 × 1013 cm-2 above which the absorption peak begins to recover. To understand the origins of these saturation and reversal effects, measurements were performed with different excitation energies, which deposit differing amounts of excess energy above the band gap. Across many samples, it was consistently observed that less energetic excitation results in stronger excitonic bleaching and gain for a given carrier density. Transient and static optical measurements at elevated temperatures, as well as transient X-ray diffraction of the samples, suggest that the origin of gain saturation and reversal is a heating and disordering of the colloidal quantum wells which produces sub-gap photoinduced absorption.

Compositionally Tuning Electron Transfer from Photoexcited Core/Shell Quantum Dots via Cation Exchange.

It is critical to find methods to control the thermodynamic driving force for photoexcited charge transfer from quantum dots (QDs) and explore how this affects charge transfer rates, since the efficiency of QD-based photovoltaic and photocatalysis technologies depends on both this rate and the associated energetic losses. In this work, we introduce a single-pot shell growth and Cu-catalyzed cation exchange method to synthesize CdxZn1-xSe/CdyZn1-yS QDs with tunable driving forces for electron transfer. Functionalizing them with two molecular electron acceptors─naphthalenediimide (NDI) and anthraquinone (AQ)─allowed us to probe nearly 1 eV of driving forces. For AQ, at lower driving forces, we find that higher Zn content results in a 130-fold increase of electron transfer rate constants. However, at higher driving forces electron transfer dynamics are unaltered. The data are understood using an Auger-assisted electron transfer model and analyzed with computational work to determine approximate binding geometries of these electron acceptors. Our work provides a method to tune QD reducing power and produces useful metrics for optimizing QD charge transfer systems that maximize rates of electron transfer while minimizing energetic losses.

Nonequilibrium Lattice Dynamics in Photoexcited 2D Perovskites.

Interplay between structural and photophysical properties of metal halide perovskites is critical to their utility in optoelectronics, but there is limited understanding of lattice response upon photoexcitation. Here, 2D perovskites butylammonium lead iodide, (BA)2 PbI4 , and phenethylammonium lead iodide, (PEA)2 PbI4 , are investigated using ultrafast transient X-ray diffraction as a function of optical excitation fluence to discern structural dynamics. Both powder X-ray diffraction and time-resolved photoluminescence linewidths narrow over 1 ns following optical excitation for the fluence range studied, concurrent with slight redshifting of the optical bandgaps. These observations are attributed to transient relaxation and ordering of distorted lead iodide octahedra stimulated mainly by electron-hole pair creation. The c axis expands up to 0.37% over hundreds of picoseconds; reflections sampling the a and b axes undergo one tenth of this expansion with the same timescale. Post-photoexcitation appearance of the (110) reflection in (BA)2 PbI4 would suggest a transient phase transition, however, through new single-crystal XRD, reflections are found that violate glide plane conditions in the reported Pbca structure. The static structure space group is reassigned as P21 21 21 . With this, a nonequilibrium phase transition is ruled out. These findings offer increased understanding of remarkable lattice response in 2D perovskites upon excitation.

Signatures of Coherent Phonon Transport in Ultralow Thermal Conductivity Two-Dimensional Ruddlesden-Popper Phase Perovskites.

An emerging class of methylammonium lead iodide (MAPbI3)-based Ruddlesden-Popper (RP) phase perovskites, BA2MAn-1PbnI3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI3, yet still degrade at elevated temperatures. We experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m·K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m·K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m·K reported for single-crystal MAPbI3. Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.

Very Robust Spray-Synthesized CsPbI3 Quantum Emitters with Ultrahigh Room-Temperature Cavity-Free Brightness and Self-Healing Ability.

Although colloidal lead halide perovskite quantum dots (PQDs) exhibit desirable emitter characteristics with high quantum yields and narrow bandwidths, instability has limited their applications in devices. In this paper, we describe spray-synthesized CsPbI3 PQD quantum emitters displaying strong photon antibunching and high brightness at room temperature and stable performance under continuous excitation with a high-intensity laser for more than 24 h. Our PQDs provided high single-photon emission rates, exceeding 9 × 106 count/s, after excluding multiexciton emissions and strong photon antibunching, as confirmed by low values of the second-order correlation function g(2)(0) (reaching 0.021 and 0.061 for the best and average PQD performance, respectively). With such high brightness and stability, we applied our PQDs as quantum random number generators, which demonstrably passed all of the National Institute of Standards and Technology's randomness tests. Intriguingly, all of the PQDs exhibited self-healing behavior and restored their PL intensities to greater than half of their initial values after excitation at extremely high intensity. Half of the PQDs even recovered almost all of their initial PL intensity. The robust properties of these spray-synthesized PQDs resulted from high crystallinity and good ligand encapsulation. Our results suggest that spray-synthesized PQDs have great potential for use in future quantum technologies (e.g., quantum communication, quantum cryptography, and quantum computing).

Photothermal behaviour of titanium nitride nanoparticles evaluated by transient X-ray diffraction.

The photothermal properties of metal nitrides have recently received significant attention owing to diverse applications in solar energy conversion, photothermal therapies, photoreactions, and thermochromic windows. Here, the photothermal response of titanium nitride nanoparticles is examined using transient X-ray diffraction, in which optical excitation is synchronized with X-ray pulses to characterize dynamic changes in the TiN lattice. Photoinduced diffraction data is quantitatively analyzed to determine increases in the TiN lattice spacing, which are furthermore calibrated against static, temperature-dependent diffraction patterns of the same samples. Measurements of 20 nm and 50 nm diameter TiN nanoparticles reveal transient lattice heating from room temperature up to ∼175 °C for the highest pump fluences investigated here. Increasing excitation intensity drives sublinear increases in lattice temperature, due to increased heat capacity at the higher effective temperatures achieved at higher powers. Temporal dynamics show that higher excitation intensity drives not only higher lattice temperatures, but also unexpectedly slower cooling of the TiN nanoparticles, which is attributed to heating of the solvent proximal to the nanoparticle surface.

Transient Lattice Response upon Photoexcitation in CuInSe2 Nanocrystals with Organic or Inorganic Surface Passivation.

CuInSe2 nanocrystals offer promise for optoelectronics including thin-film photovoltaics and printed electronics. Additive manufacturing methods such as photonic curing controllably sinter particles into quasi-continuous films and offer improved device performance. To gain understanding of nanocrystal response under such processing conditions, we investigate impacts of photoexcitation on colloidal nanocrystal lattices via time-resolved X-ray diffraction. We probe three sizes of particles and two capping ligands (oleylamine and inorganic S2-) to evaluate resultant crystal lattice temperature, phase stability, and thermal dissipation. Elevated fluences produce heating and loss of crystallinity, the onset of which exhibits particle size dependence. We find size-dependent recrystallization and cooling lifetimes ranging from 90 to 200 ps with additional slower cooling on the nanosecond time scale. Sulfide-capped nanocrystals show faster recrystallization and cooling compared to oleylamine-capped nanocrystals. Using these lifetimes, we find interfacial thermal conductivities from 3 to 28 MW/(m2 K), demonstrating that ligand identity strongly influences thermal dissipation.