Mechanochemical Degradation of Biopolymers.

Mechanochemical treatment of various organic molecules is an emerging technology of green processes in biofuel, fine chemicals, or food production. Many biopolymers are involved in isolating, derivating, or modifying molecules of natural origin. Mechanochemistry provides a powerful tool to achieve these goals, but the unintentional modification of biopolymers by mechanochemical manipulation is not always obvious or even detectable. Although modeling molecular changes caused by mechanical stresses in cavitation and grinding processes is feasible in small model compounds, simulation of extrusion processes primarily relies on phenomenological approaches that allow only tool- and material-specific conclusions. The development of analytical and computational techniques allows for the inline and real-time control of parameters in various mechanochemical processes. Using artificial intelligence to analyze process parameters and product characteristics can significantly improve production optimization. We aim to review the processes and consequences of possible chemical, physicochemical, and structural changes.

Reaction of oxiranes with cyclodextrins under high-energy ball-milling conditions.

This work presents a proof of concept for a green cyclodextrin derivatisation method that uses low-boiling epoxide reagents in a high-energy ball mill (HEBM). The simplified preparation and purification of low substitution-degree common (2-hydroxy)propylated ß- and γ-cyclodextrins (ß/γ-CDs) has been realised. The intelligent use of propylene oxide has also facilitated the more effective synthesis of highly substituted γ-CD. Epichlorohydrin-crosslinked CD-polymers (CDPs) have also been effectively prepared in the ball mill. The unoptimised preparations of soluble and insoluble CDPs displayed very small particle size distributions, while the prepared polymers currently have different complexation properties to those of their classically prepared analogues.

Ultrasound-Driven Deposition of Au and Ag Nanoparticles on Citrus Pectin: Preparation and Characterisation of Antimicrobial Composites.

Pectin is a renewable, non-toxic and biodegradable polymer made of galacturonic acid units. Its polar groups make it suitable for complexing and supporting metallic nanoparticles (NPs). This work aimed to produce antibacterial nanocomposites using pectin and acoustic cavitation. The metal NPs (Au or Ag) were deposited using ultrasound (US, 21 kHz, 50 W) and compared with those achieved with mechanical stirring. The impact of the reducing agents (NaBH4, ascorbic acid) on the dispersion and morphology of the resulting NPs was also assessed. Characterization by diffuse reflectance (DR) UV-Vis-NIR spectroscopy and field emission scanning electron microscopy (FESEM) showed that the use of US improves the dispersion and decreases the size of both Au and Ag NPs. Moreover, with Au NPs, avoiding external reductants led to smaller NPs and more uniform in size. The prepared NPs were functionalized with oxytetracycline in water and tested against Escherichia coli (gram negative) and Staphylococcus epidermidis (gram positive) via the Kirby-Bauer test. The results show a better antibacterial activity of the functionalized nanoparticles compared to antibiotic-free NPs and pure oxytetracycline, advising the potential of the nanoparticles as drug carriers. These findings underscore the significance of US-assisted synthesis, paving the way to new environmentally friendly antimicrobial materials.

Microwave-Assisted Reductive Amination of Aldehydes and Ketones Over Rhodium-Based Heterogeneous Catalysts.

Microwave (MW)-assisted reductive aminations of aldehydes and ketones were carried out in the presence of commercial and homemade heterogeneous Rh-based catalysts. Ultrasound (US) was used to improve dispersion and stability of metal nanoparticles, while commercial activated carbon and carbon nanofibers were used as supports. Moreover, various bio-derived molecules were selected as substrates, and aqueous ammonia was used as a cheap and non-toxic reagent. MW combined with heterogeneous Rh catalysts gave a 98.2 % yield in benzylamine at 80 °C with 10 bar H2 for 1 h; and a 43.3 % yield in phenylethylamine at 80 °C and 5 bar H2 for 2 h. Carbon nanofibers proved to be a better support for the metal active phase than simple activated carbon, since a limited yield in benzylamine (10.6 %) but a high selectivity for the reductive amination of ketones was obtained. Thus, raspberry ketone was converted to raspberry amine in a 63.0 % yield.

Simultaneous hydrodynamic cavitation and glow plasma discharge for the degradation of metronidazole in drinking water.

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10-6 mol L-1 MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10-6 S cm-1. The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10-3 mol H2O2 L-1 in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10-3 molH2O2L-1. Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.

Microwave-Assisted, One-Pot Synthesis of Doxycycline under Heterogeneous Catalysis in Water.

The selective synthesis of active pharmaceutical molecules is a challenging issue, particularly when attempting to make the reactions even more sustainable. The present work focuses on the microwave-assisted hydrogenolysis of oxytetracycline to selectively produce α-doxycycline. Although the combination of microwave irradiation and a heterogeneous rhodium catalyst provided good conversions, the selective synthesis of active α-doxycycline was only achieved when an oxytetracycline-cyclodextrin complex was used as the starting material, giving the desired product at 34.0% yield in a one-step reaction under very mild conditions.

Green Enabling Technologies for Competitive Synthesis of Pharmaceutical Lead Compounds.

Combinations of different technologies are at the heart of the development and implementation of new, innovative processes and approaches for Industry 4.0 in the field of medicinal chemistry and drug discovery. Process intensification and advances in high-throughput synthetic techniques can dramatically improve reaction rates in processes for which slow kinetics represents a bottleneck. Easier access to target-based chemical library collections offers wider access to new leads for drug development. Green enabling technologies are a reliable ally for the design of environmentally friendly synthetic processes and more highly competitive pharmaceutical production. Mechanochemistry, microwaves, ultrasound and flow chemistry are mature techniques that can boast drug synthesis when properly integrated into the production chain. In this review, we selected examples from the literature of the last five years related to medicinal chemistry.