Tensile strained direct bandgap GeSn microbridges enabled in GeSn-on-insulator substrates with residual tensile strain.

Despite having achieved drastically improved lasing characteristics by harnessing tensile strain, the current methods of introducing a sizable tensile strain into GeSn lasers require complex fabrication processes, thus reducing the viability of the lasers for practical applications. The geometric strain amplification is a simple technique that can concentrate residual and small tensile strain into localized and large tensile strain. However, the technique is not suitable for GeSn due to the intrinsic compressive strain introduced during the conventional epitaxial growth. In this Letter, we demonstrate the geometrical strain amplification in GeSn by employing a tensile strained GeSn-on-insulator (GeSnOI) substrate. This work offers exciting opportunities in developing practical wavelength-tunable lasers for realizing fully integrated photonic circuits.

Triaxially strained suspended graphene for large-area pseudo-magnetic fields.

Strain-engineered graphene has garnered much attention recently owing to the possibilities of creating substantial energy gaps enabled by pseudo-magnetic fields (PMFs). While theoretical works proposed the possibility of creating large-area PMFs by straining monolayer graphene along three crystallographic directions, clear experimental demonstration of such promising devices remains elusive. Herein, we experimentally demonstrate a triaxially strained suspended graphene structure that has the potential to possess large-scale and quasi-uniform PMFs. Our structure employs uniquely designed metal electrodes that function both as stressors and metal contacts for current injection. Raman characterization and tight-binding simulations suggest the possibility of achieving PMFs over a micrometer-scale area. Current-voltage measurements confirm an efficient current injection into graphene, showing the potential of our devices for a new class of optoelectronic applications. We also theoretically propose a photonic crystal-based laser structure that obtains strongly localized optical fields overlapping with the spatial area under uniform PMFs, thus presenting a practical route toward the realization of graphene lasers.

Strain-relaxed GeSn-on-insulator (GeSnOI) microdisks.

GeSn alloys offer a promising route towards a CMOS compatible light source and the realization of electronic-photonic integrated circuits. One tactic to improve the lasing performance of GeSn lasers is to use a high Sn content, which improves the directness. Another popular approach is to use a low to moderate Sn content with either compressive strain relaxation or tensile strain engineering, but these strain engineering techniques generally require optical cavities to be suspended in air, which leads to poor thermal management. In this work, we develop a novel dual insulator GeSn-on-insulator (GeSnOI) material platform that is used to produce strain-relaxed GeSn microdisks stuck on a substrate. By undercutting only one insulating layer (i.e., Al2O3), we fabricate microdisks sitting on SiO2, which attain three key properties for a high-performance GeSn laser: removal of harmful compressive strain, decent thermal management, and excellent optical confinement. We believe that an increase in the Sn content of GeSn layers on our platform can allow us to achieve improved lasing performance.

Biaxially strained germanium crossbeam with a high-quality optical cavity for on-chip laser applications.

The creation of CMOS compatible light sources is an important step for the realization of electronic-photonic integrated circuits. An efficient CMOS-compatible light source is considered the final missing component towards achieving this goal. In this work, we present a novel crossbeam structure with an embedded optical cavity that allows both a relatively high and fairly uniform biaxial strain of ∼0.9% in addition to a high-quality factor of >4,000 simultaneously. The induced biaxial strain in the crossbeam structure can be conveniently tuned by varying geometrical factors that can be defined by conventional lithography. Comprehensive photoluminescence measurements and analyses confirmed that optical gain can be significantly improved via the combined effect of low temperature and high strain, which is supported by a three-fold reduction of the full width at half maximum of a cavity resonance at ∼1,940 nm. Our demonstration opens up the possibility of further improving the performance of germanium lasers by harnessing geometrically amplified biaxial strain.

GeSn-on-insulator dual-waveband resonant-cavity-enhanced photodetectors at the 2 µm and 1.55 µm optical communication bands.

Germanium-tin-on-insulator (GSOI) has emerged as a new platform for three-dimensional (3D) photonic-integrated circuits (PICs). We report, to our knowledge, the first demonstration of GeSn dual-waveband resonant-cavity-enhanced photodetectors (RCE PDs) on GSOI platforms with resonance-enhanced responsivity at both 2 µm and 1.55 µm bands. 10% Sn is introduced to the GeSn absorbing layer to extend the detection wavelength to the 2 µm band. A vertical Fabry-Perot cavity is designed to enhance the responsivity. The measured responsivity spectra show resonance peaks that cover a wide wavelength range near both the 2 µm and conventional telecommunication bands. This work demonstrates that GeSn dual-waveband RCE PDs on a GSOI platform are promising for CMOS-compatible 3D PICs for optoelectronic applications in 2 µm and telecommunication bands.

Comparison of uniaxial and polyaxial suspended germanium bridges in terms of mechanical stress and thermal management towards a CMOS compatible light source.

Germanium (Ge) is a promising candidate for a CMOS compatible laser diode. This is due to its compatibility with Silicon (Si) and its ability to be converted into a direct band gap material by applying tensile strain. In particular uniaxial suspended Ge bridges have been extensively explored due to their ability to introduce high tensile strain. There have been two recent demonstrations of low-temperature optically-pumped lasing in these bridges but no room temperature operation accredit to insufficient strain and poor thermal management. In this paper we compare uniaxial bridges with polyaxial bridges in terms of mechanical stress and thermal management using finite element modelling (FEM). The stress simulations reveal that polyaxial bridges suffer from extremely large corner stresses which prevent larger strain from being introduced compared with uniaxial bridges. Thermal simulations however reveal that they are much less thermally sensitive than uniaxial bridges which may indicate lower optical losses. Bridges were fabricated and Raman spectroscopy was used to validate the results of the simulations. We postulate that polyaxial bridges could offer many advantages over their uniaxial counterparts as potential laser devices.

Germanium vertically light-emitting micro-gears generating orbital angular momentum.

Germanium (Ge) is capturing researchers' interest as a possible optical gain medium implementable on complementary metal-oxide-semiconductor (CMOS) chips. Band-gap engineering techniques, relying mainly on tensile strain, are required to overcome the indirect band-gap nature of bulk Ge and promote electron injection into the direct-gap valley. We used Ge on silicon on insulator (Ge-on-SOI) wafers with a high-crystalline-quality Ge layer to fabricate Ge micro-gears on silicon (Si) pillars. Micro-gears are created by etching a periodic grating-like pattern on the circumference of a conventional micro-disk, resulting in a gear shape. Thermal built-in stresses within the SiO2 layers that encapsulate the micro-gears were used to impose tensile strain on Ge. Biaxial tensile strain values ranging from 0.3-0.5% are estimated based on Raman spectroscopy measurements and finite-element method (FEM) simulations. Multiple sharp-peak resonances within the Ge direct-gap were detected at room temperature by photo-luminescence (PL) measurements. By investigating the micro-gears spectrum using finite-difference time-domain (FDTD) simulations, we identified vertically emitted optical modes with non-zero orbital angular momentum (OAM). To our best knowledge, this is the first demonstration of OAM generation within a Ge light source.

Enhanced light emission from improved homogeneity in biaxially suspended Germanium membranes from curvature optimization.

A silicon compatible light source is crucial to develop a fully monolithic silicon photonics platform. Strain engineering in suspended Germanium membranes has offered a potential route for such a light source. However, biaxial structures have suffered from poor optical properties due to unfavorable strain distributions. Using a novel geometric approach and finite element modelling (FEM) structures with improved strain homogeneity were designed and fabricated. Micro-Raman (µ-Raman) spectroscopy was used to determine central strain values. Micro-photoluminescence (µ-PL) was used to study the effects of the strain profiles on light emission; we report a PL enhancement of up to 3x by optimizing curvature at a strain value of 0.5% biaxial strain. This geometric approach offers opportunity for enhancing the light emission in Germanium towards developing a practical on chip light source.

Adeno-associated virus-mediated microRNA delivery and therapeutics.

MicroRNAs (miRNAs) are 20 to 24 nt long, single-stranded RNAs that repress gene expression. Dysregulation of miRNA expression is associated with many human diseases. Modulating the level of endogenous miRNA alters gene profiling and can achieve therapeutic benefits. Here the authors review currently used methods of altering miRNA activity in vivo. They focus on the delivery of miRNAs and miRNA inhibitors using recombinant adeno-associated virus (rAAV). In general, rAAV-mediated miRNA inhibition or overexpression provides a simple, efficient, and informative way to study miRNA function in mammals. This method also provides the opportunity to explore potential miRNA therapeutics for many diseases.

Actively tunable laser action in GeSn nanomechanical oscillators.

Mechanical forces induced by high-speed oscillations provide an elegant way to dynamically alter the fundamental properties of materials such as refractive index, absorption coefficient and gain dynamics. Although the precise control of mechanical oscillation has been well developed in the past decades, the notion of dynamic mechanical forces has not been harnessed for developing tunable lasers. Here we demonstrate actively tunable mid-infrared laser action in group-IV nanomechanical oscillators with a compact form factor. A suspended GeSn cantilever nanobeam on a Si substrate is resonantly driven by radio-frequency waves. Electrically controlled mechanical oscillation induces elastic strain that periodically varies with time in the GeSn nanobeam, enabling actively tunable lasing emission at >2 µm wavelengths. By utilizing mechanical resonances in the radio frequency as a driving mechanism, this work presents wide-range mid-infrared tunable lasers with ultralow tuning power consumption.

Short-wave infrared cavity resonances in a single GeSn nanowire.

Nanowires are promising platforms for realizing ultra-compact light sources for photonic integrated circuits. In contrast to impressive progress on light confinement and stimulated emission in III-V and II-VI semiconductor nanowires, there has been no experimental demonstration showing the potential to achieve strong cavity effects in a bottom-up grown single group-IV nanowire, which is a prerequisite for realizing silicon-compatible infrared nanolasers. Herein, we address this limitation and present an experimental observation of cavity-enhanced strong photoluminescence from a single Ge/GeSn core/shell nanowire. A sufficiently large Sn content ( ~ 10 at%) in the GeSn shell leads to a direct bandgap gain medium, allowing a strong reduction in material loss upon optical pumping. Efficient optical confinement in a single nanowire enables many round trips of emitted photons between two facets of a nanowire, achieving a narrow width of 3.3 nm. Our demonstration opens new possibilities for ultrasmall on-chip light sources towards realizing photonic-integrated circuits in the underexplored range of short-wave infrared (SWIR).

High-Precision Wavelength Tuning of GeSn Nanobeam Lasers via Dynamically Controlled Strain Engineering.

The technology to develop a large number of identical coherent light sources on an integrated photonics platform holds the key to the realization of scalable optical and quantum photonic circuits. Herein, a scalable technique is presented to produce identical on-chip lasers by dynamically controlled strain engineering. By using localized laser annealing that can control the strain in the laser gain medium, the emission wavelengths of several GeSn one-dimensional photonic crystal nanobeam lasers are precisely matched whose initial emission wavelengths are significantly varied. The method changes the GeSn crystal structure in a region far away from the gain medium by inducing Sn segregation in a dynamically controllable manner, enabling the emission wavelength tuning of more than 10 nm without degrading the laser emission properties such as intensity and linewidth. The authors believe that the work presents a new possibility to scale up the number of identical light sources for the realization of large-scale photonic-integrated circuits.

Chiral germanium micro-gears for tuning orbital angular momentum.

Group IV light sources with vertical emission and non-zero orbital-angular momentum (OAM) promise to unlock many novel applications. In this report, we demonstrate cylindrically symmetrical germanium micro-gear cavities, fabricated by etching a grating around the circumference of standard micro-disks, with periods ranging from 14 to 22. Photoluminescence (PL) measurements were done to identify the confined whispering-gallery modes (WGM). Finite-difference time-domain (FDTD) simulations were conducted to map the resonant modes to their modal profiles and characteristics. Vertical emission of WGMs with non-zero OAM was demonstrated, with a clear dependence of the OAM order ([Formula: see text]) on the WGM azimuthal order and the number of micro-gear grating periods. As the chirality, or the direction of rotation, is not controlled in a symmetrical cavity, we propose introducing staircase or triangular-shaped gear periods resulting in an asymmetry. By choosing the diameter, number of periods, and the asymmetrical direction of the gear-teeth, it is possible to generate OAM signals with certain wavelength, OAM order and chirality.

Slow Infusion of Recombinant Adeno-Associated Viruses into the Mouse Cerebrospinal Fluid Space.

Recombinant adeno-associated viruses (rAAVs) are the leading in vivo gene delivery platform, and have been extensively studied in gene therapy targeting various tissues, including the central nervous system (CNS). A single-bolus rAAV injection to the cerebrospinal fluid (CSF) space has been widely used to target the CNS, but it suffers from several drawbacks, such as leakage to peripheral tissues. Here, a protocol is described using an osmotic pump to infuse rAAV slowly into the mouse CSF space. Compared to the single-bolus injection technique, pump infusion can lead to higher CNS transduction and lower transduction in the peripheral tissues.