Rational Approach to Improve Detergent Efficacy for Membrane Protein Stabilization.

Membrane protein structures are essential for the molecular understanding of diverse cellular processes and drug discovery. Detergents are not only widely used to extract membrane proteins from membranes but also utilized to preserve native protein structures in aqueous solution. However, micelles formed by conventional detergents are suboptimal for membrane protein stabilization, necessitating the development of novel amphiphilic molecules with enhanced protein stabilization efficacy. In this study, we prepared two sets of tandem malonate-derived glucoside (TMG) variants, both of which were designed to increase the alkyl chain density in micelle interiors. The alkyl chain density was modulated either by reducing the spacer length (TMG-Ms) or by introducing an additional alkyl chain between the two alkyl chains of the original TMGs (TMG-Ps). When evaluated with a few membrane proteins including a G protein-coupled receptor, TMG-P10,8 was found to be substantially more efficient at extracting membrane proteins and also effective at preserving protein integrity in the long term compared to the previously described TMG-A13. This result reveals that inserting an additional alkyl chain between the two existing alkyl chains is an effective way to optimize detergent properties for membrane protein study. This new biochemical tool and the design principle described have the potential to facilitate membrane protein structure determination.

Study of Monoclonal Antibody Aggregation at the Air-Liquid Interface under Flow by ATR-FTIR Spectroscopic Imaging.

Throughout bioprocessing, transportation, and storage, therapeutic monoclonal antibodies (mAbs) experience stress conditions that may cause protein unfolding and/or chemical modifications. Such structural changes may lead to the formation of aggregates, which reduce mAb potency and may cause harmful immunogenic responses in patients. Therefore, aggregates need to be detected and removed or ideally prevented from forming. Air-liquid interfaces, which arise during various stages of bioprocessing, are one of the stress factors causing mAb aggregation. In this study, the behavior of an immunoglobulin G (IgG) at the air-liquid interface was investigated under flow using macro attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic imaging. This chemically specific imaging technique allows observation of adsorption of IgG to the air-liquid interface and detection of associated secondary structural changes. Chemical images revealed that IgG rapidly accumulated around an injected air bubble under flow at 45 °C; however, no such increase was observed at 25 °C. Analysis of the second derivative spectra of IgG at the air-liquid interface revealed changes in the protein secondary structure associated with increased intermolecular ß-sheet content, indicative of aggregated IgG. The addition of 0.01% w/v polysorbate 80 (PS80) reduced the amount of IgG at the air-liquid interface in a static setup at 30 °C; however, this protective effect was lost at 45 °C. These results suggest that the presence of air-liquid interfaces under flow may be detrimental to mAb stability at elevated temperatures and demonstrate the power of ATR-FTIR spectroscopic imaging for studying the structural integrity of mAbs under bioprocessing conditions.

Tris(hydroxymethyl)aminomethane Linker-Bearing Triazine-Based Triglucosides for Solubilization and Stabilization of Membrane Proteins.

High-resolution membrane protein structures are essential for a fundamental understanding of the molecular basis of diverse cellular processes and for drug discovery. Detergents are widely used to extract membrane-spanning proteins from membranes and maintain them in a functional state for downstream characterization. Due to limited long-term stability of membrane proteins encapsulated in conventional detergents, development of novel agents is required to facilitate membrane protein structural study. In the current study, we designed and synthesized tris(hydroxymethyl)aminomethane linker-bearing triazine-based triglucosides (TTGs) for solubilization and stabilization of membrane proteins. When these glucoside detergents were evaluated for four membrane proteins including two G protein-coupled receptors, a few TTGs including TTG-C10 and TTG-C11 displayed markedly enhanced behaviors toward membrane protein stability relative to two maltoside detergents [DDM (n-dodecyl-ß-d-maltoside) and LMNG (lauryl maltose neopentyl glycol)]. This is a notable feature of the TTGs as glucoside detergents tend to be inferior to maltoside detergents at stabilizing membrane proteins. The favorable behavior of the TTGs for membrane protein stability is likely due to the high hydrophobicity of the lipophilic groups, an optimal range of hydrophilic-lipophilic balance, and the absence of cis-trans isomerism.

Causes of Industrial Protein A Column Degradation, Explored Using Raman Spectroscopy.

Monoclonal antibodies (mAbs) are used extensively as biotherapeutics for chronic and acute conditions. Production of mAbs is lengthy and expensive, with protein A affinity capture the most costly step, due both to the nature of the resin and its marked reduction in binding capacity with repeated use. Our previous studies using in situ ATR-FTIR spectroscopy indicated that loss in protein A binding capacity is not the result of leaching or degradation of protein A ligand, suggesting fouling is the principal cause. Here we explore binding behavior and resin capacity loss using Raman spectroscopy. Our data reveal a distinct Raman spectral fingerprint for mAb bound to the protein A ligand of MabSelect SuRe. The results show that the drop in static binding capacity (SBC) previously observed for used protein A resin is discernible by Raman spectroscopy in combination with partial least-squares regression. The SBC is lowest (35.76 mg mL-1) for used inlet resin compared to used outlet (40.17 mg mL-1) and unused resin samples (70.35 mg mL-1). Depth profiling by Raman spectroscopy indicates that at below saturating concentrations (∼18 mg mL-1), binding of mAb is not homogeneous through used resin beads with protein binding preferentially to the outer regions of the bead, in contrast to fully homogeneous distribution through unused control MabSelect SuRe resin beads. Analysis of the Raman spectra indicates that one foulant is irreversibly bound mAb. The presence of irreversibly bound mAb and host cell proteins was confirmed by mass spectrometric analysis of used resin beads.

Foldable Detergents for Membrane Protein Stability.

Detergents are widely used for membrane protein structural study. Many recently developed detergents contain multiple tail and head groups, which are typically connected via a small and branched linker. Due to their inherent compact structures, with small inter-alkyl chain distances, these detergents form micelles with high alkyl chain density in the interiors, a feature favorably associated with membrane-protein stability. A recent study on tandem triazine maltosides (TZMs) revealed a distinct trend; despite possession of an apparently large inter-alkyl chain distance, the TZM-Es were highly effective at stabilizing membrane proteins. Thanks to the incorporation of a flexible spacer between the two triazine rings in the linker region, these detergents are prone to folding into a compact architecture in micellar environments instead of adopting an extended conformation. Detergent foldability represents a new concept of novel detergent design with significant potential for future detergent development.

Glyco-Steroidal Amphiphiles (GSAs) for Membrane Protein Structural Study.

Integral membrane proteins pose considerable challenges to high resolution structural analysis. Maintaining membrane proteins in their native state during protein isolation is essential for structural study of these bio-macromolecules. Detergents are the most commonly used amphiphilic compounds for stabilizing membrane proteins in solution outside a lipid bilayer. We previously introduced a glyco-diosgenin (GDN) detergent that was shown to be highly effective at stabilizing a wide range of membrane proteins. This steroidal detergent has additionally gained attention due to its compatibility with membrane protein structure study via cryo-EM. However, synthetic inconvenience limits widespread use of GDN in membrane protein study. To improve its synthetic accessibility and to further enhance detergent efficacy for protein stabilization, we designed a new class of glyco-steroid-based detergents using three steroid units: cholestanol, cholesterol and diosgenin. These new detergents were efficiently prepared and showed marked efficacy for protein stabilization in evaluation with a few model membrane proteins including two G protein-coupled receptors. Some new agents were not only superior to a gold standard detergent, DDM (n-dodecyl-ß-d-maltoside), but were also more effective than the original GDN at preserving protein integrity long term. These agents represent valuable alternatives to GDN, and are likely to facilitate structural determination of challenging membrane proteins.

Foldable Detergents for Membrane Protein Study: Importance of Detergent Core Flexibility in Protein Stabilization.

Membrane proteins are of biological and pharmaceutical significance. However, their structural study is extremely challenging mainly due to the fact that only a small number of chemical tools are suitable for stabilizing membrane proteins in solution. Detergents are widely used in membrane protein study, but conventional detergents are generally poor at stabilizing challenging membrane proteins such as G protein-coupled receptors and protein complexes. In the current study, we prepared tandem triazine-based maltosides (TZMs) with two amphiphilic triazine units connected by different diamine linkers, hydrazine (TZM-Hs) and 1,2-ethylenediamine (TZM-Es). These TZMs were consistently superior to a gold standard detergent (DDM) in terms of stabilizing a few membrane proteins. In addition, the TZM-Es containing a long linker showed more general protein stabilization efficacy with multiple membrane proteins than the TZM-Hs containing a short linker. This result indicates that introduction of the flexible1,2-ethylenediamine linker between two rigid triazine rings enables the TZM-Es to fold into favourable conformations in order to promote membrane protein stability. The novel concept of detergent foldability introduced in the current study has potential in rational detergent design and membrane protein applications.

ATR-FTIR spectroscopy and spectroscopic imaging to investigate the behaviour of proteins subjected to freeze-thaw cycles in droplets, wells, and under flow.

Biopharmaceuticals are used to treat a range of diseases from arthritis to cancer, however, since the advent of these highly specific, effective drugs, there have been challenges involved in their production. The most common biopharmaceuticals, monoclonal antibodies (mAbs), are vulnerable to aggregation and precipitation during processing. Freeze thaw cycles (FTCs), which can be required for storage and transportation, can lead to a substantial loss of product, and contributes to the high cost of antibody production. It is therefore necessary to monitor aggregation levels at susceptible points in the production pathway, such as during purification and transportation, thus contributing to a fuller understanding of mAb aggregation and providing a basis for rational optimisation of the production process. This paper uses attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and spectroscopic imaging to investigate the effect of these potentially detrimental FTCs on protein secondary structure in both static wells and under flowing conditions, using lysozyme as a model protein. The results revealed that the amount of protein close to the surface of the ATR crystal, and hence level of aggregates, increased with increasing FTCs. This was observed both within wells and under flow conditions, using conventional ATR-FTIR spectroscopy and ATR-FTIR spectroscopic imaging. Interestingly, we also observed changes in the Amide I band shape indicating an increase in ß-sheet contribution, and therefore an increase in aggregates, with increasing number of FTCs. These results show for the first time how ATR-FTIR spectroscopy can be successfully applied to study the effect of FTC cycles on protein samples. This could have numerous broader applications, such as in biopharmaceutical production and rapid diagnostic testing.

Insight into purification of monoclonal antibodies in industrial columns via studies of Protein A binding capacity by in situ ATR-FTIR spectroscopy.

Therapeutic monoclonal antibodies (mAbs) are effective treatments for a range of cancers and other serious diseases, however mAb treatments cost on average ∼$100 000 per year per patient, limiting their use. Currently, industry favours Protein A affinity chromatography (PrAc) as the key step in downstream processing of mAbs. This step, although highly efficient, represents a significant mAb production cost. Fouling of the Protein A column and Protein A ligand leaching contribute to the cost of mAb production by shortening the life span of the resin. In this study, we assessed the performance of used PrAc resin recovered from the middle inlet, center and outlet as well as the side inlet of a pilot-scale industrial column. We used a combination of static binding capacity (SBC) analysis and Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy to explore the used resin samples. SBC analysis demonstrated that resin from the inlet of the column had lower binding capacity than resin from the column outlet. ATR-FTIR spectroscopy with PLS (partial least square) analysis confirmed the results obtained from SBC analysis. Importantly, in situ ATR-FTIR spectroscopy also allowed both measurement of the concentration and assessment of the conformational state of the bound Protein A. Our results reveal that PrAc resin degradation after use is dependent on column location and that neither Protein A ligand leaching nor denaturation are responsible for binding capacity loss.

Insights into the Role of Membrane Lipids in the Structure, Function and Regulation of Integral Membrane Proteins.

Membrane proteins exist within the highly hydrophobic membranes surrounding cells and organelles, playing key roles in cellular function. It is becoming increasingly clear that the membrane does not just act as an appropriate environment for these proteins, but that the lipids that make up these membranes are essential for membrane protein structure and function. Recent technological advances in cryogenic electron microscopy and in advanced mass spectrometry methods, as well as the development of alternative membrane mimetic systems, have allowed experimental study of membrane protein-lipid complexes. These have been complemented by computational approaches, exploiting the ability of Molecular Dynamics simulations to allow exploration of membrane protein conformational changes in membranes with a defined lipid content. These studies have revealed the importance of lipids in stabilising the oligomeric forms of membrane proteins, mediating protein-protein interactions, maintaining a specific conformational state of a membrane protein and activity. Here we review some of the key recent advances in the field of membrane protein-lipid studies, with major emphasis on respiratory complexes, transporters, channels and G-protein coupled receptors.

Diastereomeric Cyclopentane-Based Maltosides (CPMs) as Tools for Membrane Protein Study.

Amphiphilic agents, called detergents, are invaluable tools for studying membrane proteins. However, membrane proteins encapsulated by conventional head-to-tail detergents tend to denature or aggregate, necessitating the development of structurally distinct molecules with improved efficacy. Here, a novel class of diastereomeric detergents with a cyclopentane core unit, designated cyclopentane-based maltosides (CPMs), were prepared and evaluated for their ability to solubilize and stabilize several model membrane proteins. A couple of CPMs displayed enhanced behavior compared with the benchmark conventional detergent, n-dodecyl-ß-d-maltoside (DDM), for all the tested membrane proteins including two G-protein-coupled receptors (GPCRs). Furthermore, CPM-C12 was notable for its ability to confer enhanced membrane protein stability compared with the previously developed conformationally rigid NBMs [J. Am. Chem. Soc. 2017, 139, 3072] and LMNG. The effect of the individual CPMs on protein stability varied depending on both the detergent configuration (cis/trans) and alkyl chain length, allowing us draw conclusions on the detergent structure-property-efficacy relationship. Thus, this study not only provides novel detergent tools useful for membrane protein research but also reports on structural features of the detergents critical for detergent efficacy in stabilizing membrane proteins.

Insight into Heterogeneous Distribution of Protein Aggregates at the Surface Layer Using Attenuated Total Reflection-Fourier Transform Infrared Spectroscopic Imaging.

Monoclonal antibodies (mAbs) have been used as therapeutics for the last few decades. It is necessary to investigate the stability of these mAbs under stress conditions and to elucidate aggregation mechanisms as a means of developing approaches which minimize the problem. Attenuated total reflection (ATR)-FTIR spectroscopic imaging allows probing of a sample at a depth of penetration of around 0.5-5 µm, which makes it suitable for the study of aggregated proteins when accumulated as a layer close to the surface of the ZnSe internal reflection element (IRE). Here, macro ATR-FTIR spectroscopic imaging, along with a variable angle of incidence accessory, have been used to differentiate between the secondary structure of proteins in bulk solution and those that have precipitated onto or near the ZnSe IRE surface. IgG spectra obtained from protein samples in individual wells have been averaged, extracted, and preprocessed, and the Amide I bands of the protein samples were compared and further analyzed to reveal protein distribution at the ZnSe IRE surface. These findings show depth profiling of IgG aggregates at the ZnSe IRE surface (0.5-5 µm) and do not follow a trend of decreasing protein presence with an increasing angle of incidence or increasing depth of penetration, suggesting an irregular distribution of aggregates in the z-direction.

Strategies for successful isolation of a eukaryotic transporter.

The isolation of integral membrane proteins for structural analysis remains challenging and this is particularly the case for eukaryotic membrane proteins. Here we describe our efforts to isolate OsBOR3, a boron transporter from Oryza sativa. OsBOR3 was expressed as both full length and a C-terminally truncated form lacking residues 643-672 (OsBOR3Δ1-642). While both express well as C-terminal GFP fusion proteins in Saccharomyces cerevisiae, the full length protein isolates poorly in the detergent dodecyl-ß-d-maltoside (DDM). The OsBOR3Δ1-642 isolated in DDM in large quantities but was contaminated with GFP tagged protein, indicated incomplete protease removal of the tag. Addition of the reducing agent dithiothreitol (DTT) had no effect on isolation. Detergent screening indicated that the neopentyl glycol detergents, LMNG, UDMNG and DMNG conferred greater stability on the OsBOR3Δ1-642 than DDM. Isolation of OsBOR3Δ1-642 in LMNG both in the presence and absence of DTT produced large quantities of protein but contaminated with GFP tagged protein. Isolation of OsBOR3Δ1-642 in DMNG + DTT resulted in protein sample that does not contain any detectable GFP but elutes at a higher retention volume than that seen for protein isolated in either DDM or LMNG. Mass spectrometry confirmed that the LMNG and DMNG purified protein is OsBOR3Δ1-642 indicating that the DMNG isolated protein is monomer compared to the dimer isolated using LMNG. This was further supported by single particle electron microscopic analysis revealing that the DMNG protein particles are roughly half the size of the LMNG protein particles.

1,3,5-Triazine-Cored Maltoside Amphiphiles for Membrane Protein Extraction and Stabilization.

Despite their major biological and pharmacological significance, the structural and functional study of membrane proteins remains a significant challenge. A main issue is the isolation of these proteins in a stable and functional state from native lipid membranes. Detergents are amphiphilic compounds widely used to extract membrane proteins from the native membranes and maintain them in a stable form during downstream analysis. However, due to limitations of conventional detergents, it is essential to develop novel amphiphiles with optimal properties for protein stability in order to advance membrane protein research. Here we designed and synthesized 1,3,5-triazine-cored dimaltoside amphiphiles derived from cyanuric chloride. By introducing variations in the alkyl chain linkage (ether/thioether) and an amine-functionalized diol linker (serinol/diethanolamine), we prepared two sets of 1,3,5-triazine-based detergents. When tested with several model membrane proteins, these agents showed remarkable efficacy in stabilizing three transporters and two G protein-coupled receptors. Detergent behavior substantially varied depending on the detergent structural variation, allowing us to explore detergent structure-property-efficacy relationships. The 1,3,5-triazine-based detergents introduced here have significant potential for membrane protein study as a consequence of their structural diversity and universal stabilization efficacy for several membrane proteins.

Protein-Lipid Interactions Stabilize the Oligomeric State of BOR1p from Saccharomyces cerevisiae.

The BOR proteins are integral membrane transporters which mediate efflux of boron. Structures of two BOR family members from Arabidopsis thaliana and Saccharomyces mikitiae indicate that the proteins exist as dimers. However, it remains unclear whether dimer formation is dependent on protein-lipid interactions or whether the dimer is the functional form of the protein. Here, we used the BOR1p protein from Saccharomyces cerevisiae (ScBOR1p), recombinantly expressed in its native host, to explore these aspects of BOR transporter structure and function. Native mass spectrometry (MS) revealed that ScBOR1p isolates as a monomer in a range of detergents. Lipidomics analysis showed that ScBOR1p co-isolates with phosphatidylserine (PS), phosphatidylcholine (PC), phosphatidylethanolamine (PE), and phosphatidylinositol (PI). Delipidation of ScBOR1p followed by addition of PS or PE causes formation of ScBOR1p dimers. Using a homology model of ScBOR1p, we identified a possible lipid binding site at the dimer interface comprising residues Arg265, Arg267, Arg480, and Arg481. A quadruple 4R/A mutant was expressed and isolated and also shown to be monomeric by native MS, and addition of PS or PE to this mutant did not reform the dimer. Functional complementation analysis revealed that the 4R/A mutant had boron efflux activity, suggesting that the ScBOR1p monomer is responsible for transport function. Taken together, these data strongly indicate that the physiological form of the ScBOR1p is the dimer and that dimer formation is dependent on association with membrane lipids.

Transporter oligomerisation: roles in structure and function.

Oligomerisation is a key feature of integral membrane transporters with roles in structure, function and stability. In this review, we cover some very recent advances in our understanding of how oligomerisation affects these key transporter features, with emphasis on a few groups of transporters, including the nucleobase ascorbate transporters, neurotransmitter sodium symporters and major facilitator superfamily members.

Self-Assembly Behavior and Application of Terphenyl-Cored Trimaltosides for Membrane-Protein Studies: Impact of Detergent Hydrophobic Group Geometry on Protein Stability.

Amphipathic agents are widely used in various fields including biomedical sciences. Micelle-forming detergents are particularly useful for in vitro membrane-protein characterization. As many conventional detergents are limited in their ability to stabilize membrane proteins, it is necessary to develop novel detergents to facilitate membrane-protein research. In the current study, we developed novel trimaltoside detergents with an alkyl pendant-bearing terphenyl unit as a hydrophobic group, designated terphenyl-cored maltosides (TPMs). We found that the geometry of the detergent hydrophobic group substantially impacts detergent self-assembly behavior, as well as detergent efficacy for membrane-protein stabilization. TPM-Vs, with a bent terphenyl group, were superior to the linear counterparts (TPM-Ls) at stabilizing multiple membrane proteins. The favorable protein stabilization efficacy of these bent TPMs is likely associated with a binding mode with membrane proteins distinct from conventional detergents and facial amphiphiles. When compared to n-dodecyl-ß-d-maltoside (DDM), most TPMs were superior or comparable to this gold standard detergent at stabilizing membrane proteins. Notably, TPM-L3 was particularly effective at stabilizing the human ß2 adrenergic receptor (ß2 AR), a G-protein coupled receptor, and its complex with Gs protein. Thus, the current study not only provides novel detergent tools that are useful for membrane-protein study, but also suggests a critical role for detergent hydrophobic group geometry in governing detergent efficacy.

Trehalose-cored amphiphiles for membrane protein stabilization: importance of the detergent micelle size in GPCR stability.

Despite their importance in biology and medicinal chemistry, structural and functional studies of membrane proteins present major challenges. To study diverse membrane proteins, it is crucial to have the correct detergent to efficiently extract and stabilize the proteins from the native membranes for biochemical/biophysical downstream analyses. But many membrane proteins, particularly eukaryotic ones, are recalcitrant to stabilization and/or crystallization with currently available detergents and thus there are major efforts to develop novel detergents with enhanced properties. Here, a novel class of trehalose-cored amphiphiles are introduced, with multiple alkyl chains and carbohydrates projecting from the trehalose core unit are introduced. A few members displayed enhanced protein stabilization behavior compared to the benchmark conventional detergent, n-dodecyl-ß-d-maltoside (DDM), for multiple tested membrane proteins: (i) a bacterial leucine transporter (LeuT), (ii) the R. capsulatus photosynthetic superassembly, and (iii) the human ß2 adrenergic receptor (ß2AR). Due to synthetic convenience and their favourable behaviors for a range of membrane proteins, these agents have potential for membrane protein research. In addition, the detergent property-efficacy relationship discussed here will guide future design of novel detergents.

Correction: Trehalose-cored amphiphiles for membrane protein stabilization: importance of the detergent micelle size in GPCR stability.

Correction for 'Trehalose-cored amphiphiles for membrane protein stabilization: importance of the detergent micelle size in GPCR stability' by Manabendra Das et al., Org. Biomol. Chem., 2019, 17, 3249-3257.

Rationally Engineered Tandem Facial Amphiphiles for Improved Membrane Protein Stabilization Efficacy.

A new family of tandem facial glucosides/maltosides (TFGs/TFMs) for membrane protein manipulation was prepared. The best detergent varied depending on the hydrophobic thickness of the target protein, but ether-based TFMs (TFM-C0E, TFM-C3E, and TFM-C5E) were notable for their ability to confer higher membrane protein stability than the previously developed amide-based TFA-1 (P. S. Chae, K. Gotfryd, J. Pacyna, L. J. W. Miercke, S. G. F. Rasmussen, R. A. Robbins, R. R. Rana, C. J. Loland, B. Kobilka, R. Stroud, B. Byrne, U. Gether, S. H. Gellman, J. Am. Chem. Soc. 2010, 132, 16750-16752). Thus, this study not only introduces novel agents with the potential to be used in membrane protein research but also highlights the importance of both the hydrophobic length and linker functionality of the detergent in stabilizing membrane proteins.