RESUMO
Phosphoprotein enriched in astrocytes, 15 kDa (PEA-15) exerts its regulatory roles on several critical cellular pathways through protein-protein interactions depending on its phosphorylation states. It can either inhibit the extracellular signal-regulated kinase (ERK) activities when it is dephosphorylated or block the assembly of death-inducing signaling complex (DISC) and the subsequent activation of apoptotic initiator, caspase-8, when it is phosphorylated. Due to the important roles of PEA-15 in regulating these pathways that lead to opposite cellular outcomes (cell proliferation vs. cell death), we proposed a phosphostasis (phosphorylation homeostasis) model, in which the phosphorylation states of the protein are vigorously controlled and regulated to maintain a delicate balance. The phosphostasis gives rise to the protective cellular functions of PEA-15 to preserve optimum cellular conditions. In this article, using advanced multidimensional nuclear magnetic resonance (NMR) techniques combined with a novel chemical shift (CS)-Rosetta algorithm for de novo protein structural determination, we report a novel conformation of PEA-15 death-effector domain (DED) upon interacting with ERK2. This new conformation is modulated by the irregularly structured C-terminal tail when it first recognizes and binds to ERK2 at the d-peptide recruitment site (DRS) in an allosteric manner, and is facilitated by the rearrangement of the surface electrostatic and hydrogen-bonding interactions on the DED. In this ERK2-bound conformation, three of the six helices (α2, α3, and α4) comprising the DED reorient substantially in comparison to the free-form structure, exposing key residues on the other three helices that directly interact with ERK2 at the DEF-docking site (docking site for ERK, FxF) and the activation loop. Additionally, we provide evidence that the phosphorylation of the C-terminal tail leads to a distinct conformation of DED, allowing efficient interactions with Fas-associated death domain (FADD) protein at the DISC. Our results substantiate the allosteric regulatory roles of the C-terminal tail in modulating DED conformation and facilitating protein-protein interactions of PEA-15.
Assuntos
Proteínas Reguladoras de Apoptose/química , Proteínas Reguladoras de Apoptose/metabolismo , Algoritmos , Regulação Alostérica , Proteína de Domínio de Morte Associada a Fas , Proteína Quinase 1 Ativada por Mitógeno/metabolismo , Modelos Moleculares , Fosfoproteínas/metabolismo , Fosforilação , Ligação Proteica , Domínios Proteicos , Relação Estrutura-AtividadeRESUMO
BACKGROUND: Total shoulder arthroplasty (TSA) is commonly used to treat glenohumeral osteoarthritis (GHOA) with an intact rotator cuff. Recently, reverse shoulder arthroplasty (RSA) has been used for GHOA patients who are elderly or have eccentric glenoid wear. We evaluated patients with GHOA scheduled to have TSA but who were changed to RSA because of intraoperative difficulties with the glenoid component or instability and compared them with a cohort that underwent TSA to determine if the groups had similar outcomes. METHODS: We identified 24 consecutive GHOA patients who underwent RSA and matched them to 96 patients who underwent TSA. Glenoid wear and rotator cuff musculature were assessed with preoperative computed tomography scans. Direct hospital costs of the procedure were collected. RESULTS: Postoperative American Shoulder and Elbow Surgeons score, Simple Shoulder Test score, and range of motion were similar between the 2 groups. Five TSA patients had radiographic glenoid loosening, whereas no RSA patients did. Neither group required a revision. One RSA patient required surgery for treatment of a periprosthetic fracture. RSA was $7274 more costly than TSA, related mainly to implant cost. CONCLUSIONS: Patients with GHOA who were converted intraoperatively to RSA because of improper seating of the glenoid trial or persistent posterior subluxation had outcomes comparable to those of a similar group of patients in whom TSA was performed. At midterm follow-up, TSA is associated with lower cost than RSA. The higher rate of radiographic loosening in the TSA group warrants longer follow-up to assess revision costs. In cases in which a TSA cannot be performed with confidence, RSA is a reasonable alternative.
Assuntos
Artroplastia de Substituição/métodos , Osteoartrite/cirurgia , Articulação do Ombro/cirurgia , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Reoperação , Estudos Retrospectivos , Manguito Rotador , Escápula , Resultado do TratamentoRESUMO
BACKGROUND: Glenoid bone loss is commonly observed during primary and revision reverse shoulder arthroplasty. Glenoid baseplates are often implanted with incomplete glenoid bone support. The purpose of this study was to evaluate the glenoid component fixation of the glenoid baseplate with variable amounts of incomplete coverage. METHODS: Twenty-eight polyurethane trabecular bone surrogates were instrumented with the same center screw-type glenoid baseplate with 4 peripheral 5.0-mm locking screws in a glenoid bone loss model consisting of 25%, 50%, 75%, and 100% coverage. Each construct was tested through a 55° arc of motion with both compressive and shear forces across the glenosphere. Baseplate micromotion was recorded throughout 10,000 cycles for each model. RESULTS: There was no significant difference in baseline micromotion between the 4 experimental groups (P = .099). In the 25% baseplate coverage group, 3 of 7 exhibited micromotion above the 150-µm threshold (624.5, 469.1, and 712.1 µm) during cyclic loading. After 10,000 cycles of loading, the 25% coverage group exhibited significantly more micromotion than the 50% (P = .049), 75% (P = .026), and 100% (P = .040) coverage groups. There was no significant difference between the 100%, 75%, and 50% coverage groups (P = 1.00). CONCLUSIONS: Glenoid baseplate fixation in the setting of glenoid bone loss is no different when 50%, 75%, or 100% of the baseplate is supported by glenoid bone. Bone loss resulting in only 25% coverage results in significantly greater micromotion, often above the 150-µm threshold.
Assuntos
Artroplastia de Substituição/métodos , Reabsorção Óssea , Prótese Articular , Articulação do Ombro/cirurgia , Fenômenos Biomecânicos , Humanos , Modelos Biológicos , Ajuste de PróteseRESUMO
BACKGROUND: Reverse shoulder arthroplasty (RSA) is gaining popularity for the treatment of debilitating shoulder disorders. Despite marked improvements in patient satisfaction and function, the RSA complication rate is high. Glenosphere dissociation has been reported and may result from multiple mechanisms. However, few RSA retrieval studies exist. METHODS: We reviewed our RSA database and identified patients with glenosphere dissociation between 1999 and 2013. Prosthesis type, glenosphere size, and contributing factors to dissociation were noted. Five retrieved implants were available for analysis, and evidence of wear or corrosion on the Morse taper was documented. Further, we biomechanically investigated improper Morse taper engagement that may occur intraoperatively as a potential cause of acute dissociation. RESULTS: Thirteen patients with glenosphere dissociation were identified (0.5 months to 7 years postoperatively). Glenosphere size distribution was as follows: 32 mm (n = 1), 36 mm (n = 4), 40 mm (n = 6), and 44 mm (n = 2). Incidence of dissociation was correlated to glenosphere size (P < .001). Taper damage was limited to fretting wear, and there was minimal evidence of taper corrosion. Biomechanically, improper taper engagement reduced the torsional capacity of the glenosphere-baseplate interface by 60% from 19.2 ± 1.0 N-m to 7.5 ± 1.5 N-m. CONCLUSION: We identified several mechanisms contributing to glenosphere dissociation after RSA, including trauma and improper taper engagement. Limited evidence of corrosive wear on the taper interface was identified. Although it is rare, the incidence of glenosphere dissociation was higher when 40- and 44-mm glenospheres were implanted compared with smaller glenospheres (32 and 36 mm), probably because of the larger exposed surface area for potential impingement.
Assuntos
Artroplastia de Substituição/efeitos adversos , Artropatias/cirurgia , Articulação do Ombro/cirurgia , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Feminino , Humanos , Artropatias/fisiopatologia , Masculino , Pessoa de Meia-Idade , Desenho de Prótese , Estudos Retrospectivos , Articulação do Ombro/fisiopatologiaRESUMO
BACKGROUND: Patients with osteoarthritis undergoing shoulder arthroplasty may suffer from osteoporosis. The purpose of this study was to determine whether computed tomography (CT)-derived Hounsfield unit (HU) measurements correlate with bone mineral density (BMD) and whether these data could predict implant size and fixation choice. MATERIALS AND METHODS: The study analyzed preoperative dual energy x-ray absorptiometry and shoulder CT scans for 230 patients who underwent total shoulder arthroplasty. Hip BMD and T scores and HU attenuation in the humerus were correlated. HU cutoff values were developed to aid in differentiating patients whose BMD values were within normal reference ranges from patients with osteopenia or osteoporosis. Risk factors associated with low BMD were correlated, and the effect of BMD on humeral stem size, and fixation method was investigated. RESULTS: Significant correlations between HU and hip BMD and T score were identified (P < .001). HU value ranges were identified that may alert the surgeon of metabolic bone disease. Significant correlation (P < 0.05) was found between low BMD and certain osteoporosis risk factors. Age at time of surgery was a predictor of cemented stem fixation (P = .024). Patients with a lower BMD were statistically more likely to receive a larger-diameter humeral stem (P = .016). CONCLUSIONS: Orthopedic surgeons may be able to use data obtained from shoulder CT scans to predict the need for larger stem size or cement fixation during shoulder arthroplasty. In combination with the risk factor profile, these data may be useful in predicting the need for an osteoporosis workup and treatment. LEVEL OF EVIDENCE: Level III, Study of Nonconsecutive Patients, Diagnostic Study.
Assuntos
Osteoartrite/diagnóstico por imagem , Osteoporose/diagnóstico por imagem , Articulação do Ombro , Absorciometria de Fóton , Adulto , Idoso , Idoso de 80 Anos ou mais , Artroplastia de Substituição , Densidade Óssea , Feminino , Humanos , Incidência , Masculino , Pessoa de Meia-Idade , Osteoartrite/epidemiologia , Osteoartrite/cirurgia , Osteoporose/epidemiologia , Osteoporose/cirurgia , Fatores de Risco , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Modifications in reverse shoulder arthroplasty (RSA) have been made with the intent of maximizing motion, although there is little objective evidence outlining their benefit. This study investigated the RSA component combinations that impart the greatest effect on impingement-free glenohumeral motion. METHODS: A previously validated virtual shoulder model was implanted with RSA components that varied by humeral implant type (inset/onset), glenosphere diameter (30, 36, and 42 mm), glenosphere placement (inferior/neutral), glenosphere center-of-rotation offset (0, 5, and 10 mm), humeral neck-shaft angle (130° and 150°), and humeral offset (zero, five, and ten mm). Motion was simulated in all technique combinations until the point of impingement in abduction, flexion/extension (F/E), and internal/external rotation (IR/ER). Regression analysis was used to rank combinations based on motion. RESULTS: Of 216 possible study combinations, 126 constructs (58%) demonstrated no arm-at-side impingement and were included for analysis. Models with the largest motion in abduction, F/E, and IR/ER, respectively, were inset-42-inferior-10-150-zero (107°), inset-36-inferior-10-130-five (146°), and inset-42-inferior-10-130-ten (121°). Humeral neck-shaft angle, glenosphere center-of-rotation offset, glenosphere placement, and glenosphere diameter had a significant effect on motion in all planes tested. Of these variables, humeral neck-shaft angle was most predictive of a change in abduction and F/E motion, whereas glenosphere placement was most predictive of a change in IR/ER motion. CONCLUSION: Higher glenosphere center-of-rotation offsets led to an increase in motion in all planes. To maximize motion in abduction, a valgus humeral component should be selected; to maximize F/E, a varus humeral component should be selected; and, to maximize IR/ER, the glenosphere should be placed inferiorly.
Assuntos
Artroplastia de Substituição , Prótese Articular , Síndrome de Colisão do Ombro/cirurgia , Articulação do Ombro/fisiopatologia , Articulação do Ombro/cirurgia , Fenômenos Biomecânicos , Humanos , Modelos Anatômicos , Amplitude de Movimento ArticularRESUMO
Accurate 3D structures of membrane proteins are essential for comprehending their mechanisms of action and designing specific ligands to modulate their activities. However, these structures are still uncommon due to the involvement of detergents in the sample preparation. Recently, membrane-active polymers have emerged as an alternative to detergents, but their incompatibility with low pH and divalent cations has hindered their efficacy. Herein, we describe the design, synthesis, characterization, and application of a new class of pH-tunable membrane-active polymers, NCMNP2a-x. The results demonstrated that NCMNP2a-x could be used for high-resolution single-particle cryo-EM structural analysis of AcrB in various pH conditions and can effectively solubilize BcTSPO with the function preserved. Molecular dynamic simulation is consistent with experimental data that shed great insights into the working mechanism of this class of polymers. These results demonstrated that NCMNP2a-x might have broad applications in membrane protein research.
RESUMO
BACKGROUND: The treatment of patients with severe glenoid bone loss using reverse total shoulder arthroplasty (RSA) is challenging because of the difficulty in obtaining glenoid fixation. The outcomes following primary RSA with structural bone-grafting for severe glenoid bone loss and the amount of native bone support necessary to achieve clinical improvement are unclear. METHODS: We reviewed functional outcomes (American Shoulder and Elbow Surgeons [ASES] score, Simple Shoulder Test [SST], visual analog scale [VAS] for pain and function, patient satisfaction, and range of motion) for 57 patients who were treated with a primary RSA and glenoid bone-grafting for severe glenoid bone loss. Three glenoids were classified as type A2; 2, as type B2; and 2, as type C, according to the Walch classification; 16 glenoids, as grade E1; and 19, as grade E3, according to the Sirveaux classification; 9 glenoids, as grade 3, according to the Levigne classification; and 6 were unable to be classified. For the 44 patients with adequate preoperative computed tomographic (CT) data and postoperative radiographs, we evaluated native bone contact under the glenoid baseplate by matching the projected shape of the implant and scapula from the postoperative radiographs with a generated 3-dimensional (3D) model of the preoperative scapula. We then analyzed functional outcomes in relation to native bone support of the baseplate. RESULTS: At a mean of 46 months (minimum, 24 months), the patients demonstrated significant improvements in function, motion, and pain (change in the ASES total score = 38.6, change in SST = 5.4, change in forward elevation = 72.4°, change in abduction = 67.7°, change in external rotation = 24.3°, and change in VAS pain score = -4.6; p < 0.001 for all). On the basis of the generated 3D model, the baseplate contact to host bone was a mean (and standard deviation) of 17% ± 12% (range, 0% to 50%). There was no significant correlation between host bone coverage and change in the ASES score (p = 0.51) for the 44 patients included in this analysis. There were 4 major complications (7%) in the study group but no glenoid baseplate failures. CONCLUSIONS: Glenoid bone-grafting in a primary RSA in a shoulder with severe bone loss produces good functional outcomes that do not correlate with the degree of native bone contact under the baseplate. We had observed no glenoid component failures at the time of writing. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.
RESUMO
BACKGROUND: The aim of this study was to determine if there were significant differences in glenohumeral joint morphology between North American and East Asian populations that may influence sizing and selection of shoulder arthroplasty systems. METHODS: Computed tomography reconstructions of 92 North American and 58 East Asian patients were used to perform 3-dimensional measurements. The proximal humeral position was normalized in all patients by aligning it with the scapular plane utilizing anatomic landmarks. Measurements were performed on the humerus and scapula and included coronal and axial humeral head radius, humeral neck shaft and articular arc angles, glenoid height and width, and critical shoulder angle. Glenohumeral relationships were also measured and included lateral distance to the greater tuberosity and acromion, abduction lever arm, and acromial index. Parametric and nonparametric statistical analyses were used to compare population metrics. RESULTS: East Asian glenohumeral measurements were significantly smaller for all linear metrics (p < 0.05), with the exception of acromial length, which was greater than in the North American cohort (p < 0.001). The increase in acromial length affected all measurements involving the acromion including abduction lever arms. No difference was found between the neck shaft and articular angular measurements. CONCLUSIONS: The East Asian population exhibited smaller shoulder morphometrics than their North American cohort, with the exception of an extended acromial overhang. The morphologic data can provide some additional factors to consider when choosing an optimal shoulder implant for the East Asian population, in addition to creating future designs that may better accommodate this population.
Assuntos
Povo Asiático/estatística & dados numéricos , Negro ou Afro-Americano/estatística & dados numéricos , Articulação do Ombro/anatomia & histologia , Ombro/anatomia & histologia , População Branca/estatística & dados numéricos , Idoso , Antropometria , Feminino , Humanos , Masculino , Desenho de Prótese , República da Coreia/epidemiologia , Prótese de Ombro , Estados Unidos/epidemiologiaRESUMO
BACKGROUND: Pure-moment loading is the test method of choice for spinal implant evaluation. However, the apparatuses and boundary conditions employed by laboratories in performing spine flexibility testing vary. The purpose of this study was to quantify the differences, if they exist, in intervertebral range of motion (ROM) resulting from different pure-moment loading apparatuses used in two laboratories. METHODS: Twenty-four (laboratory A) and forty-two (laboratory B) intact L1-S1 specimens were loaded using pure moments (±7.5 Nm) in flexion-extension (FE), lateral bending (LB) and axial torsion (AT). At laboratory A, pure moments were applied using a system of cables, pulleys and suspended weights in 1.5 Nm increments. At laboratory B, specimens were loaded in a pneumatic biaxial test frame mounted with counteracting stepper-motor-driven biaxial gimbals. ROM was obtained in both labs using identical optoelectronic systems and compared. RESULTS: In FE, total L1-L5 ROM was similar, on average, between the two laboratories (lab A: 37.4° ± 9.1°; lab B: 35.0° ± 8.9°, p=0.289). Larger apparent differences, on average, were noted between labs in AT (lab A: 19.4° ± 7.3°; lab B: 15.7° ± 7.1°, p=0.074), and this finding was significant for combined right and left LB (lab A: 45.5° ± 11.4°; lab B: 35.3° ± 8.5°, p < 0.001). CONCLUSIONS: To our knowledge, this is the first study comparing ROM of multi-segment lumbar spines between laboratories utilizing different apparatuses. The results of this study show that intervertebral ROM in multi-segment lumbar spine constructs are markedly similar in FE loading. Differences in boundary conditions are likely the source of small and sometimes statistically significant differences between the two techniques in LB and AT ROM. The relative merits of each testing strategy with regard to the physiologic conditions that are to be simulated should be considered in the design of a study including LB and AT modes of loading. An understanding of these differences also serves as important information when comparing study results across different laboratories.
RESUMO
BACKGROUND CONTEXT: No profile, integrated interbody cages are designed to act as implants for cervical spine fusion, which obviates the need for additional internal fixation, combining the functionality of an interbody device and the stabilizing benefits of an anterior cervical plate. Biomechanical data are needed to determine if integrated interbody constructs afford similar stability to anterior plating in single-level cervical spine fusion constructs. PURPOSE: The purpose of this study was to biomechanically quantify the acute stabilizing effect conferred by a single low-profile device design with three integrated screws ("anchored cage"), and compare the range of motion reductions to those conferred by a standard four-hole rigid anterior plate following instrumentation at the C5-C6 level. We hypothesized that the anchored cage would confer comparable postoperative segmental rigidity to the cage and anterior plate construct. STUDY DESIGN: Biomechanical laboratory study of human cadaveric spines. METHODS: Seven human cadaveric cervical spines (C3-C7) were biomechanically evaluated using a nondestructive, nonconstraining, pure-moment loading protocol with loads applied in flexion, extension, lateral bending (right+left), and axial rotation (left+right) for the intact and instrumented conditions. Range of motion (ROM) at the instrumented level was the primary biomechanical outcome. Spines were loaded quasi-statically up to 1.5 N-m in 0.5 N-m increments and ROM at the C5-C6 index level was recorded. Each specimen was tested in the following conditions: 1. Intact 2. Discectomy+anchored cage (STA) 3. Anchored cage (screws removed)+anterior locking plate (ALP) 4. Anchored cage only, without screws or plates (CO) RESULTS: ROM at the C5-C6 level was not statistically different in any motion plane between the STA and ALP treatment conditions (p>.407). STA demonstrated significant reductions in flexion/extension, lateral bending, and axial rotation ROM when compared with the CO condition (p<.022). CONCLUSIONS: In this in vitro biomechanical study, the anchored cage with three integrated screws afforded biomechanical stability comparable to that of the standard interbody cage+anterior plate cervical spine fusion approach. Due to its low profile design, this anchored cage device may avoid morbidities associated with standard anterior plating, such as dysphagia.
Assuntos
Vértebras Cervicais/cirurgia , Fixadores Internos , Amplitude de Movimento Articular , Fusão Vertebral/instrumentação , Fenômenos Biomecânicos , Parafusos Ósseos , Feminino , Humanos , Masculino , Teste de Materiais , Pessoa de Meia-Idade , Fusão Vertebral/métodosRESUMO
BACKGROUND: Mechanically replacing one or more pain generating articulations in the functional spinal unit (FSU) may be a motion preservation alternative to arthrodesis at the affected level. Baseline biomechanical data elucidating the quantity and quality of motion in such arthroplasty constructs is non-existent. PURPOSE: The purpose of the study was to quantify the motion-preserving effect of a posterior total disc replacement (PDR) combined with a unilateral facet replacement (FR) system at a single lumbar level (L4-L5). We hypothesized that reinforcement of the FSU with unilateral FR to replace the resected, native facet joint following PDR implantation would restore quality and quantity of motion and additionally not change biomechanics at the adjacent levels. STUDY DESIGN: In-vitro study using human cadaveric lumbar spines. METHODS: Six (n = 6) cadaveric lumbar spines (L1-S1) were evaluated using a pure-moment stability testing protocol (±7.5 Nm) in flexion-extension (F/E), lateral bending (LB) and axial rotation (AR). Each specimen was tested in: (1) intact; (2) unilateral FR; and (3) unilateral FR + PDR conditions. Index and adjacent level ROM (using hybrid protocol) were determined opto-electronically. Interpedicular travel (IPT) and instantaneous center of rotation (ICR) at the index level were radiographically determined for each condition. ROM, ICR, and IPT measurements were compared (repeated measures ANOVA) between the three conditions. RESULTS: Compared to the intact spine, no significant changes in F/E, LB or AR ROM were identified as a result of unilateral FR or unilateral FR + PDR. No significant changes in adjacent L3-L4 or L5-S1 ROM were identified in any loading mode. No significant differences in IPT were identified between the three test conditions in F/E, LB or AR at the L4-L5 level. The ICRs qualitatively were similar for the intact and unilateral FR conditions and appeared to follow placement (along the anterior-posterior (AP) direction) of the PDR in the disc space. CONCLUSION: Biomechanically, quantity and quality of motion are maintained with combined unilateral FR + PDR at a single lumbar spinal level.
RESUMO
BACKGROUND CONTEXT: Despite an increase in the clinical use of no-profile anchored interbody cages (AIC) for anterior cervical discectomy and fusion (ACDF) procedures, there is little published biomechanical data describing its stabilizing effect relative to the traditional anterior plating technique over two contiguous levels. PURPOSE: To biomechanically compare the acute stability conferred by a stand-alone interbody fusion device with three integrated fixation screws ("anchored cage") with a traditional six-hole rigid anterior plate in a two contiguous levels (C4-C5+C5-C6) fusion construct. We hypothesized that the anchored cage would confer comparable segmental rigidity to the cage and anterior plate construct. STUDY DESIGN: A biomechanical laboratory study using cadaveric human cervical spines. METHODS: Seven (n=7) cadaveric human cervical spines (C3-C7) were subjected to quasistatic, pure-moment loading (±1.5 Nm) in flexion-extension (flex/ext), right/left lateral bending (RB/LB), and right/left axial rotation (RR/LR) for the following test conditions: intact; after discectomy and insertion of the AIC at C4-C5 and C5-C6 with anchoring screws engaged; after the removal of the integrated anchoring screws and instrumentation of an anterior locking plate (ALP) over both levels; and cage-only (CO) configuration with screws and anterior plate removed. Intervertebral range of motion (ROM) at the instrumented levels was the primary biomechanical outcome. RESULTS: Flex/ext, RB/LB, and RR/LR ROMs were significantly reduced (p<.001) over both levels by AIC and ALP constructs relative to the CO construct. Significant reduction in flex/ext motion was achieved with the ALP (6.8±3.7) relative to the AIC (10.2°±4.6°) (p=.041) construct. No significant differences were seen in ROM reductions over the two levels between the AIC and APL groups in lateral bending or axial rotation (p>.826). CONCLUSIONS: The anchored cage fusion construct conferred similar acute biomechanical stability in lateral bending and axial rotation ROMs relative to rigid anterior plating. We identified a statistically significant reduction (Δ=3.4°, combined over two levels) in sagittal plane ROM conferred by the ALP relative to the AIC construct. Our biomechanical findings may support the clinical use of no-profile integrated interbody devices over two contiguous levels in ACDF.
Assuntos
Parafusos Ósseos , Amplitude de Movimento Articular , Fusão Vertebral/métodos , Idoso , Fenômenos Biomecânicos , Humanos , Técnicas In Vitro , Pessoa de Meia-IdadeRESUMO
BACKGROUND: Glenohumeral relationships in reverse shoulder arthroplasty patients have not been previously reported. The purpose of this study was to quantify and compare the shoulder spatial relationships and moment arms. Measurements were used to define general size categories and determine if sizes scale linearly for all metrics. METHODS: Ninety-two shoulders of patients undergoing primary reverse shoulder arthroplasty for functionally-deficient massive rotator cuff tear without bony deformity or deficiency were evaluated using three-dimensional CT reconstructions and computer-aided design software. Multiple glenohumeral relationships (including moment arm) were measured and evaluated for size stratification and linearity. Generalized linear modeling was used to investigate how predictive glenoid height, coronal humeral head diameter, and gender were of greater tuberosity positions. FINDINGS: The 92 shoulders were grouped based on glenoid height: small (<33.4mm), medium (33.4-38.0mm), and large (>38.0mm). All relationships varied between groups. The humeral head size, glenoid width, lateral offset, and moment arm all independently increased linearly (r(2)≥0.92) but the rate of increase varied (slope range: 0.59-1.92). Glenoid height, coronal humeral head diameter and gender predicted the greater tuberosity position within mean 1.09mm (standard deviation (SD) 0.84mm) of actual position in 90% of the population. INTERPRETATION: Distinct groups exist based on the size of the glenoid in shoulder arthroplasty patients. Shoulder modeling should account for size groups, sex, and non-uniform linear scaling of morphometric parameters. Prediction of the greater tuberosity offset can be made using sex and size parameters. Clinical implications include appropriate prosthetic size selection and avoiding large deviations in non-anatomic reconstructions.
Assuntos
Artroplastia de Substituição/métodos , Articulação do Ombro/anatomia & histologia , Idoso , Idoso de 80 Anos ou mais , Pontos de Referência Anatômicos/anatomia & histologia , Fenômenos Biomecânicos , Estatura , Feminino , Humanos , Cabeça do Úmero/anatomia & histologia , Masculino , Pessoa de Meia-Idade , Tamanho do Órgão , Radiografia , Amplitude de Movimento Articular , Lesões do Manguito Rotador , Escápula/anatomia & histologia , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgiaRESUMO
BACKGROUND: The lateral transpsoas approach to interbody fusion is gaining popularity. Existing literature suggests that perioperative vertebra-related complications include endplate breach owing to aggressive enedplate preparation and poor bone quality. The acute effects of cage subsidence on stabilization and indirect decompression at the affected level are unknown. The purpose of this study was to compare the kinematics and radiographic metrics of indirect decompression in lumbar spines instrumented with laterally placed cages in the presence of inadvertent endplate fracture, which was determined radiographically, to specimens instrumented with lateral cages with intact endplates. METHODS: Five levels in 5 specimens sustained endplate fracture during lateral cage implantation followed by supplementary fixation (pedicle screw/rod [PSR]: n = 1; anterolateral plate [ALP]: n = 4), as part of a larger laboratory-based study. Range of motion (ROM) in these specimens was compared with 13 instrumented specimens with intact endplates. All specimens were scanned using computed tomography (CT) in the intact, noninstrumented condition and after 2-level cage placement with internal fixation under a 400-N follower load. Changes in disc height, foraminal area, and canal area were measured and compared between specimens with intact endplates and fractured endplates. RESULTS: Subsidence in the single PSR specimen and 4 ALP specimens was 6.5 mm and 4.3 ± 2.7 mm (range: 2.2-8.3 mm), respectively. ROM was increased in the PSR and ALP specimens with endplate fracture when compared with instrumented specimens with intact endplates. In 3 ALP specimens with endplate fracture, ROM in some motion planes increased relative to the intact, noninstrumented spine. These increases in ROM were paralleled by increase in cage translations during cyclic loading (up to 3.3 mm) and an unpredictable radiographic outcome with increases or decreases in posterior disc height, foraminal area, and canal area when compared with instrumented specimens with intact endplates. CONCLUSIONS: Endplate fracture and cage subsidence noted radiographically intraoperatively or in the early postoperative period may be indicative of biomechanical instability at the affected level concomitant with a lack of neurologic decompression, which may require revision surgery.
RESUMO
Introducción: En la práctica diaria, y la mayoría de veces de manera incidental, es frecuente encontrar lesiones lipomatosas de diferente origen que requieren una caracterización adecuada. Objetivo: Revisar y describir las lesiones lipomatosas benignas más frecuentes; analizar su origen, sus características en los diferentes métodos de imagen como ultrasonido (US), tomografía computarizada (TC) y resonancia magnética (RM) y su implicación en procesos de enfermedad. Métodos: Revisión bibliográfica de las lesiones lipomatosas de la cabeza a los pies con una revisión retrospectiva de casos de nuestra institución. Resultados: Los lipomas son tumores benignos usualmente diagnosticados de manera incidental. Es importante conocer sus características en imágenes para acercarse al diagnóstico apropiado.
Introduction: In daily practice, and in most cases incidentally, we often find lipomatous lesions of different origin which require proper characterization. Objective: Our goal is to review and describe the most frequently found benign lipomatous lesions, describing their origin and their characteristics in different imaging techniques such as ultrasound (US), Computed tomography (CT) and Magnetic resonance (MR), and their involvement in disease. Methods: We perform a bibliographic research in lipomatous lesions from head to toe and a retrospective review of cases from our institution. Results: Lipomatous lesions are benign tumors usually diagnosed incidentally. It is important to know its features in the different imaging methods for an accurate diagnosis.
Assuntos
Humanos , Lipoma , Imageamento por Ressonância Magnética , Tomografia Computadorizada por Raios X , Tecido Adiposo , NeoplasiasRESUMO
La enfermedad de Fahr es una entidad neurodegenerativa autosómica dominante poco frecuente, con incidencia en personas entre la cuarta y la quinta década de la vida, caracterizada por calcificaciones simétricas prominentes detectadas por tomografía computarizada en tálamo, cápsula interna, sustancia blanca, cerebelo y ganglios basales con o sin compromiso del núcleo dentado, sin que se relacione con alteraciones del metabolismo del calcio. Estos cambios pueden llevar a trastornos neuropsiquiátricos y síntomas piramidales, extrapiramidales y cerebelosos. En este artículo se exponen las manifestaciones clínicas, los hallazgos imaginológicos y la serología utilizada para llegar al diagnóstico de esta enfermedad con base en dos casos clínicos de la Clínica Universitaria Colombia en la ciudad de Bogotá.
Fahr's disease is an autosomal dominant neurodegenerative disease. It is infrequent, and it has an incidence between the fourth and fifth decade of life. It is characterized by prominent symmetrical calcifications detected in CT studies located on thalamus, internal capsule, white matter, cerebellum and basal ganglia with or without involvement of the dentate nucleus, without being related to calcium metabolism disorders. These changes may lead to neuropsychiatric disorders and pyramidal, extrapyramidal and cerebellar symptoms. In this article we expose the clinical manifestations, imaging findings and serology test used for the diagnosis of the disease based on two clinical cases in the Clínica Universitaria Colombia in Bogotá.