Numerical evaluation of the use of vegetation as a shelterbelt for enhancing the wind and thermal comfort in peripheral and lateral-type skygardens in highrise buildings.

Skygardens or skycourts are a unique architectural intervention in the built environment, enhancing the social, economic, and environmental values of the building. It allows occupants to connect and experience outdoor freshness within a semi-enclosed environment. However, skygardens located on a highrise building may generate intense wind gusts, endangering the safety of occupants. Using a validated computational fluid dynamics model, this study investigates the potential of various vegetative barriers or shelterbelts in attenuating the high wind speeds encountered in such spaces and the impact on wind and thermal comfort. Three skygarden configurations were investigated with and without vegetative barriers, simplified and modelled as porous zones, and their effect was studied on the velocity and temperature profile at the occupants' level. The results indicate that while hedges and trees can offer resistance to airflow, trees provide higher temperature reduction. However, a combination of vegetative and geometrical barriers provides the most optimal condition in the skygarden. The study has identified the importance of assessing wind attenuation characteristics of tree plantations on highrise skygarden, and the results can be used in designing intervention strategies. Moreover, vegetation can attenuate pollutants and mitigate poor air quality by surface deposition, and future studies should investigate in that direction. Electronic Supplementary Material ESM: The Appendix is available in the online version of this article at 10.1007/s12273-022-0943-7.

CFD and experimental data of closed-loop wind tunnel flow.

The data presented in this article were the basis for the study reported in the research articles entitled 'A validated design methodology for a closed loop subsonic wind tunnel' (Calautit et al., 2014) [1], which presented a systematic investigation into the design, simulation and analysis of flow parameters in a wind tunnel using Computational Fluid Dynamics (CFD). The authors evaluated the accuracy of replicating the flow characteristics for which the wind tunnel was designed using numerical simulation. Here, we detail the numerical and experimental set-up for the analysis of the closed-loop subsonic wind tunnel with an empty test section.

Wind tunnel and numerical data on the ventilation performance of windcatcher with wing wall.

The data presented in this article were the basis for the study reported in the research articles entitled "Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher" (P. Nejat, J.K. Calautit, M.Z.A. Majid, B.R. Hughes, I. Zeynali, F. Jomehzadeh, 2016) [1] which presents the effect of wing wall on the air flow distribution under using the windcatchers as a natural ventilation equipment. Here, we detail the wind tunnel testing and numerical set-up used for obtaining the data on ventilation rates and indoor airflow distribution inside a test room with a two-sided windcatcher and wing wall. Three models were integrated with wing wall angled at 30°, 45° and 60° and another windcatcher was a conventional two-sided device. The computer-aided design (CAD) three-dimensional geometries which were produced using Solid Edge modeler are also included in the data article.

Data on the natural ventilation performance of windcatcher with anti-short-circuit device (ASCD).

This article presents the datasets which were the results of the study explained in the research paper 'Anti-short-circuit device: a new solution for short-circuiting in windcatcher and improvement of natural ventilation performance' (P. Nejat, J.K. Calautit, M.Z. Abd. Majid, B.R. Hughes, F. Jomehzadeh, 2016) [1] which introduces a new technique to reduce or prevent short-circuiting in a two-sided windcatcher and also lowers the indoor CO2 concentration and improve the ventilation distribution. Here, we provide details of the numerical modeling set-up and data collection method to facilitate reproducibility. The datasets includes indoor airflow, ventilation rates and CO2 concentration data at several points in the flow field. The CAD geometry of the windcatcher models are also included.

Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment.

The data presented in this article were the basis for the study reported in the research articles entitled 'Climate responsive behaviour heat pipe technology for enhanced passive airside cooling' by Chaudhry and Hughes [10] which presents the passive airside cooling capability of heat pipes in response to gradually varying external temperatures and related to the research article "CFD and wind tunnel study of the performance of a uni-directional wind catcher with heat transfer devices" by Calautit and Hughes [1] which compares the ventilation performance of a standard roof mounted wind catcher and wind catcher incorporating the heat pipe technology. Here, we detail the wind tunnel test set-up and inflow conditions and the methodologies for the transient heat pipe experiment and analysis of the integration of heat pipes within the control domain of a wind catcher design.