RESUMO
The need for improved functionalities in extreme environments is fuelling interest in high-entropy ceramics1-3. Except for the computational discovery of high-entropy carbides, performed with the entropy-forming-ability descriptor4, most innovation has been slowly driven by experimental means1-3. Hence, advancement in the field needs more theoretical contributions. Here we introduce disordered enthalpy-entropy descriptor (DEED), a descriptor that captures the balance between entropy gains and enthalpy costs, allowing the correct classification of functional synthesizability of multicomponent ceramics, regardless of chemistry and structure. To make our calculations possible, we have developed a convolutional algorithm that drastically reduces computational resources. Moreover, DEED guides the experimental discovery of new single-phase high-entropy carbonitrides and borides. This work, integrated into the AFLOW computational ecosystem, provides an array of potential new candidates, ripe for experimental discoveries.
RESUMO
Herein we report the synthesis and characterization of spinel copper gallate (CuGa2O4) nanocrystals (NCs) with an average size of 3.7 nm via a heat-up colloidal reaction. CuGa2O4 NCs have a band gap of â¼2.5 eV and marked p-type character, in agreement with ab initio simulations. These novel NCs are demonstrated to be photoactive, generating a clear and reproducible photocurrent under blue light irradiation when deposited as thin films. Crucially, the ability to adjust the Cu/Ga ratio within the NCs, and the effect of this on the optical and electronic properties of the NCs, was also demonstrated. These results position CuGa2O4 NCs as a novel material for optoelectronic applications, including hole transport and light harvesting.
RESUMO
This article presents a comprehensive investigation into the functionalization of methoxyphenylazobenzene using electron-directing groups located at the meta position relative to the azo group. Spectroscopic analysis of meta-functionalized azobenzenes reveals that the incorporation of electron-withdrawing units significantly influences the absorption spectra of both E and Z isomers, while electron-donating functionalities lead to more subtle changes. The thermal relaxation process from Z to E result in almost twice as prolonged for electron-withdrawing functionalized azobenzenes compared to their electron-rich counterparts. Computational analysis contributes a theoretical understanding of the electronic structure and properties of meta-substituted azobenzenes. This combined approach, integrating experimental and computational techniques, yields significant insights into the structure-property relationship of meta-substituted asymmetrical phenolazobenzenes.
RESUMO
4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based molecules have emerged as interesting materials for optoelectronic applications due to the possibility to easily fine-tune their photophysical and optical properties, dominated by two main absorption bands in the visible range. However, no studies have been reported on the nature of these spectral features. By means of ultrafast spectroscopy, we detect intramolecular energy transfer in a spin-coated film of di-thieno-phenyl BODIPY (DTPBDP) dispersed in a polystyrene matrix after pumping the high-energy absorption band. The same effect is not present upon pumping the lowest-energy band, which instead allows the achievement of efficient amplified spontaneous emission. Density functional calculations indicate the different nature of the two main absorption bands, explaining their different photophysical behavior.
RESUMO
The fabrication of multifunctional switches is a fundamental step in the development of nanometer-scale molecular spintronic devices. The anchoring of active organic radicals on gold nanoparticles (AuNPs) surface is little studied and the realization of AuNPs-based switches remains extremely challenging. We report the first demonstration of a surface molecular switch based on AuNPs decorated with persistent perchlorotriphenylmethyl (PTM) radicals. The redox properties of PTM are exploited to fabricate electrochemical switches with optical and magnetic responses, showing high stability and reversibility. Electronic interaction between the radicals and the gold surface is investigated by UV-vis, showing a very broad absorption band in the near-infrared (NIR) region, which becomes more intense when PTMs are reduced to anionic phase. By using multiple experimental techniques, we demonstrate that this interaction is likely favored by the preferentially flat orientation of PTM ligands on the metallic NP surface, as confirmed by first-principles simulations.
Assuntos
Ouro , Nanopartículas Metálicas , Ouro/química , Magnetismo , Nanopartículas Metálicas/química , Oxirredução , Marcadores de SpinRESUMO
Triplet ground-state organic molecules are of interest with respect to several emerging technologies but usually show limited stability, especially as thin films. We report an organic diradical, consisting of two Blatter radicals, that possesses a triplet ground state with a singlet-triplet energy gap, ΔEST ≈ 0.4-0.5 kcal mol-1 (2J/k ≈ 220-275 K). The diradical possesses robust thermal stability, with an onset of decomposition above 264 °C (TGA). In toluene/chloroform, glassy matrix, and fluid solution, an equilibrium between two conformations with ΔEST ≈ 0.4 kcal mol-1 and ΔEST ≈ -0.7 kcal mol-1 is observed, favoring the triplet ground state over the singlet ground-state conformation in the 110-330 K temperature range. The diradical with the triplet ground-state conformation is found exclusively in crystals and in a polystyrene matrix. The crystalline neutral diradical is a good electrical conductor with conductivity comparable to the thoroughly optimized bis(thiazolyl)-related monoradicals. This is surprising because the triplet ground state implies that the underlying π-system is cross-conjugated and thus is not compatible with either good conductance or electron delocalization. The diradical is evaporated under ultra-high vacuum to form thin films, which are stable in air for at least 18 h, as demonstrated by X-ray photoelectron and electron paramagnetic resonance (EPR) spectroscopies.
Assuntos
Elétrons , Condutividade Elétrica , Espectroscopia de Ressonância de Spin Eletrônica/métodos , Modelos Moleculares , Conformação MolecularRESUMO
Pathologies associated with calcified tissue, such as osteoporosis, demand inâ vivo and/or inâ situ spectroscopic analysis to assess the role of chemical substitutions in the inorganic component. High energy X-ray or NMR spectroscopies are impractical or damaging in biomedical conditions. Low energy spectroscopies, such as IR and Raman techniques, are often the best alternative. In apatite biominerals, the vibrational signatures of the phosphate group are generally used as fingerprint of the materials although they provide only limited information. Here, we have used first principles calculations to unravel the complexity of the complete vibrational spectra of apatites. We determined the spectroscopic features of all the phonon modes of fluoroapatite, hydroxy-apatite, and carbonated fluoroapatite beyond the analysis of the phosphate groups, focusing on the effect of local corrections induced by the crystalline environment and the specific mineral composition. This provides a clear and unique reference to discriminate structural and chemical variations in biominerals, opening the way to a widespread application of non-invasive spectroscopies for inâ vivo diagnostics, and biomedical analysis.
Assuntos
Apatitas/química , Materiais Biocompatíveis/química , Modelos Moleculares , Análise Espectral RamanRESUMO
VO2 is a unique phase change material with strongly anisotropic electronic properties. Recently, samples have been prepared that present a co-existence of phases and thus form metal-insulator junctions of the same chemical compound. Using first principles calculations, the optical properties of metallic and semiconducting VO2 are here discussed to design self-contained natural optical metamaterials, avoiding coupling with other dielectric media. The analysis of the optical properties complements the experiments in the description of the vast change in reflectance and metallicity for both disordered and planar compounds. The present results also predict the possibility to realize ordered VO2 junctions operating as efficient hyperbolic metamaterials in the THz-visible range, by simply adjusting the ratio between metallic and insulating VO2 content. The possibility to excite propagating volume plasmom polariton across the metamaterial is finally discussed.
RESUMO
Poly(3,4-ethylenedioxythiophene) (PEDOT) semiconductor plays a relevant role in the development of organic thermoelectric (TE) devices for low-power generation. While dopant counterions are usually needed to provide electrical conductivity, their overall effects on the thermoelectric response of the systems are unknown and uncontrolled. Here, we present a first principles study of the electronic and thermal transport of PEDOT crystalline assemblies, specifically analysing the role played by tosylate dopants on the thermoelectric figure of merit of the doped system. Our results demonstrate that, beside the desired charging effect, the presence of dopants impacts the bulk configuration by inflating the packing structure and worsening the intrinsic transport properties of the PEDOT host. This provides a rationale for the necessity of controlling the optimal amount and the structural incorporation of dopant in order to maximize the thermoelectric response of organic materials.
RESUMO
The simulation of the color optical properties of molecular dyes in liquid solution requires the calculation of time evolution of the solute absorption spectra fluctuating in the solvent at finite temperature. Time-averaged spectra can be directly evaluated by combining ab initio Car-Parrinello molecular dynamics and time-dependent density functional theory calculations. The inclusion of hybrid exchange-correlation functionals, necessary for the prediction of the correct transition frequencies, prevents one from using these techniques for the simulation of the optical properties of large realistic systems. Here we present an alternative approach for the prediction of the color of natural dyes in solution with a low computational cost. We applied this approach to representative anthocyanin dyes: the excellent agreement between the simulated and the experimental colors makes this method a straightforward and inexpensive tool for the high-throughput prediction of colors of molecules in liquid solvents.
RESUMO
Scanning tunneling microscopy and local conductance mapping show spin-state coexistence in bilayer films of Fe[(H2Bpz2)2bpy] on Au(111) that is independent of temperature between 131 and 300 K. This modification of bulk behavior is attributed in part to the unique packing constraints of the bilayer film that promote deviations from bulk behavior. The local density of states measured for different spin states shows that high-spin molecules have a smaller transport gap than low-spin molecules and are in agreement with density functional theory calculations.
Assuntos
Ouro/química , Ferro/química , Microscopia de Tunelamento , TemperaturaRESUMO
Blatter radical derivatives are very attractive due to their potential applications, ranging from batteries to quantum technologies. In this work, we focus on the latest insights regarding the fundamental mechanisms of radical thin film (long-term) degradation, by comparing two Blatter radical derivatives. We find that the interaction with different contaminants (such as atomic H, Ar, N, and O and molecular H2, N2, O2, H2O, and NH2) affects the chemical and magnetic properties of the thin films upon air exposure. Also, the radical-specific site, where the contaminant interaction takes place, plays a role. Atomic H and NH2 are detrimental to the magnetic properties of Blatter radicals, while the presence of molecular water influences more specifically the magnetic properties of the diradical thin films, and it is believed to be the major cause of the shorter diradical thin film lifetime in air.
RESUMO
Herein, we report the isolation of new heterobimetallic complexes [Ni(0.6)Pd(1.4)(EtCS(2))(4)] (1), [NiPt(EtCS(2))(4)] (2) and [Pd(0.4)Pt(1.6)(EtCS(2))(4)] (3), which were constructed by using transmetallation procedures. Subsequent oxidation with iodine furnished the MM'X monodimensional chains [Ni(0.6)Pt(1.4)(EtCS(2))(4)I] (4) and [Ni(0.1)Pd(0.3)Pt(1.6)(EtCS(2))(4)I] (5). The physical properties of these systems were investigated and the chain structures 4 and 5 were found to be reminiscent of the parent [Pt(2)(EtCS(2))(4)I] species. However, they were more sensitively dependent on the localised nature of the charge on the Ni ion, which caused spontaneous breaking of the conduction bands.
RESUMO
The concept of order in disordered materials is the key to controlling the mechanical, electrical, and chemical properties of amorphous compounds widely exploited in industrial applications and daily life. Rather, it is far from being understood. Here, we propose a multi-technique numerical approach to study the order/disorder of amorphous materials on both the short- and the medium-range scale. We combine the analysis of the disorder level based on chemical and physical features with their geometrical and topological properties, defining a previously unexplored interplay between the different techniques and the different order scales. We applied this scheme to amorphous GeSe and GeSeTe chalcogenides, showing a modulation of the internal disorder as a function of the stoichiometry and composition: Se-rich systems are less ordered than Ge-rich systems at the short- and medium-range length scales. The present approach can be easily applied to more complex systems containing three or more atom types without any a priori knowledge about the system chemical-physical features, giving a deep insight into the understanding of complex systems.
RESUMO
Discovering multifunctional materials with tunable plasmonic properties, capable of surviving harsh environments is critical for advanced optical and telecommunication applications. We chose high-entropy transition-metal carbides because of their exceptional thermal, chemical stability, and mechanical properties. By integrating computational thermodynamic disorder modeling and time-dependent density functional theory characterization, we discovered a crossover energy in the infrared and visible range, corresponding to a metal-to-dielectric transition, exploitable for plasmonics. It was also found that the optical response of high-entropy carbides can be largely tuned from the near-IR to visible when changing the transition metal components and their concentration. By monitoring the electronic structures, we suggest rules for optimizing optical properties and designing tailored high-entropy ceramics. Experiments performed on the archetype carbide HfTa4C5 yielded plasmonic properties from room temperature to 1500K. Here we propose plasmonic transition-metal high-entropy carbides as a class of multifunctional materials. Their combination of plasmonic activity, high-hardness, and extraordinary thermal stability will result in yet unexplored applications.
RESUMO
Molecular sensitization of the single-crystal ZnO (1010) surface through absorption of the catechol chromophore is investigated by means of density functional approaches. The resulting type II staggered interface is recovered in agreement with experiments, and its origin is traced back to the presence of molecular-related states in the gap of metal-oxide electronic structure. A systematic analysis carried out for further catecholate adsorbates allows us to identify the basic mechanisms that dictate the energy position of the gap states. The peculiar level alignment is demonstrated to be originated from the simultaneous interplay among the specific anchoring group, the backbone conjugation, and the lateral functional groups. The picture derived from our results provides efficient strategies for tuning the lineup between molecular and oxide states in hybrid interfaces with potential impact for ZnO-based optoelectronic applications.
RESUMO
The optical properties of the flavylium state of the cyanin dye are simulated numerically by combining Car-Parrinello molecular dynamics and linear-response time-dependent density functional theory calculations. The spectrum of the dye calculated in the gas phase is characterized by two peaks in the yellow and in the blue (green and violet), using a GGA-PBE (hybrid-B3LYP) DFT functional, which would bring about a greenish (bright orange) color incompatible with the dark purple hue observed in nature. Describing the effect of the water solvent through a polarizable continuum model does not modify qualitatively the resulting picture. An explicit simulation of both solvent and thermal effects using ab initio molecular dynamics results instead in a spectrum that is compatible with the observed coloration. This result is analyzed in terms of the spectroscopic effects of the molecular distortions induced by thermal fluctuations.
Assuntos
Antocianinas/química , Corantes/química , Fenômenos Ópticos , Solventes/química , Temperatura , Água/química , Impedância Elétrica , Gases/química , Conformação Molecular , Simulação de Dinâmica Molecular , Teoria QuânticaRESUMO
Proteins able to recognize inorganic surfaces are of paramount importance for living organisms. Mimicking nature, surface-recognizing proteins and peptides have also been man-made by combinatorial biochemistry. However, to date the recognition mechanisms remain elusive, and the underlying physicochemical principles are still unknown. Selectivity of gold-binding peptides (cysteine-free and rich in hydroxyl amino acids) is particularly puzzling, since the most relevant gold surface, Au(111), is known to be chemically inert and atomically flat. Using atomistic first-principle simulations we show that weak chemical interactions of dative-bond character confer to a prototype secondary structure (an antiparallel beta-sheet made of hydroxyl amino acids) and its hydration layer the capability of discriminating among gold surface sites. Our results highlight the unexpected role of hydration water in this process, suggesting that hydrophilic amino acids and their hydration shell cooperate to contribute to protein-gold surface recognition.
Assuntos
Ouro/química , Radical Hidroxila/química , Simulação de Dinâmica Molecular , Peptídeos/química , Teoria Quântica , Água/química , Aminoácidos/química , Modelos Moleculares , Estrutura Secundária de Proteína , Propriedades de SuperfícieRESUMO
We investigate from first principles the electronic and transport properties of zigzag graphene nanoribbons in the presence of Co adatoms. Comparing different adsorption sites across the width, we find that the Co-C coupling is rather sensitive to the local environment. While a net spin polarization appears in all cases, the spin filtering effect is significantly enhanced when the Co adatom is at the edge, where the adsorption energy is maximized and a partial suppression of edge-associated transport channels occurs. We also probe the magnetic interaction in the nonbonding regime, for Co-graphene nanoribbon (GNR) distances ranging from adsorption to π-π typical configurations. Our results indicate that Co-GNR coupling is still appreciable in an intermediate range, whereas it becomes vanishingly small in the limit of π-π distances.
RESUMO
We investigated the hydration properties of the cyanin dye molecule in the ionic flavylium configuration, through massive classical (force field) and ab initio (Car-Parrinello) molecular dynamics simulations at room temperature. Classical and quantum mechanical results coherently describe the structure of the first solvation shell. We discuss the hydrophobicity/hydrophilicity of the molecule in terms of attractive lateral hydroxyl-water and repulsive carbon pi-water interactions. The analysis of the electronic structure shows a net polarization and a molecular orbital redistribution induced by the polar solvent on the intrinsic (gas phase) properties of the dye. Changing the properties of the molecule, the hydration effects should be carefully taken into account in the further interactions of cyanin with the external environment.