Interactions of Neutrophils with the Polymeric Molecular Components of the Biofilm Matrix in the Context of Implant-Associated Bone and Joint Infections.

In the presence of orthopedic implants, opportunistic pathogens can easily colonize the biomaterial surfaces, forming protective biofilms. Life in biofilm is a central pathogenetic mechanism enabling bacteria to elude the host immune response and survive conventional medical treatments. The formation of mature biofilms is universally recognized as the main cause of septic prosthetic failures. Neutrophils are the first leukocytes to be recruited at the site of infection. They are highly efficient in detecting and killing planktonic bacteria. However, the interactions of these fundamental effector cells of the immune system with the biofilm matrix, which is the true interface of a biofilm with the host cells, have only recently started to be unveiled and are still to be fully understood. Biofilm matrix macromolecules consist of exopolysaccharides, proteins, lipids, teichoic acids, and the most recently described extracellular DNA. The latter can also be stolen from neutrophil extracellular traps (NETs) by bacteria, who use it to strengthen their biofilms. This paper aims to review the specific interactions that neutrophils develop when they physically encounter the matrix of a biofilm and come to interact with its polymeric molecular components.

Antibacterial Activity on Orthopedic Clinical Isolates and Cytotoxicity of the Antimicrobial Peptide Dadapin-1.

In orthopedic surgery, biomaterial-associated infections represent a complication of serious concern. Most promising strategies to prevent these infections currently rely on the use of anti-infective biomaterials. Desirably, in anti-infective biomaterials, the antibacterial properties should be achieved by doping, grafting, or coating the material surfaces with molecules that are alternative to conventional antibiotics and exhibit a potent and highly specific activity against bacteria, without altering the biocompatibility. Antimicrobial peptides (AMPs) are among the most interesting candidate molecules for this biomaterial functionalization. Here, the potential expressed by the recently discovered peptide Dadapin-1 was explored by assaying its MIC, MBIC and MBC on clinical strains of relevant bacterial species isolated from orthopedic infections and by assessing its cytotoxicity on the human osteoblast-like MG63 cells. When appropriately tested in diluted Mueller Hinton Broth II (MHB II), Dadapin-1 exhibited significant antibacterial properties. MIC values were in the range of 3.1-6.2 µM for the gram-positive bacteria Staphylococcus aureus, Staphylococcus epidermidis, and Staphylococcus warneri, and 12.4-24.9 µM for the gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. Interestingly, the peptide was found non-cytotoxic, with an IC50 exceeding the highest concentration tested of 179 µM. Overall, Dadapin-1 expresses considerable potential for future application in the production of anti-infective biomaterials.

Biofilms in Periprosthetic Orthopedic Infections Seen through the Eyes of Neutrophils: How Can We Help Neutrophils?

Despite advancements in our knowledge of neutrophil responses to planktonic bacteria during acute inflammation, much remains to be elucidated on how neutrophils deal with bacterial biofilms in implant infections. Further complexity transpires from the emerging findings on the role that biomaterials play in conditioning bacterial adhesion, the variety of biofilm matrices, and the insidious measures that biofilm bacteria devise against neutrophils. Thus, grasping the entirety of neutrophil-biofilm interactions occurring in periprosthetic tissues is a difficult goal. The bactericidal weapons of neutrophils consist of the following: ready-to-use antibacterial proteins and enzymes stored in granules; NADPH oxidase-derived reactive oxygen species (ROS); and net-like structures of DNA, histones, and granule proteins, which neutrophils extrude to extracellularly trap pathogens (the so-called NETs: an allusive acronym for "neutrophil extracellular traps"). Neutrophils are bactericidal (and therefore defensive) cells endowed with a rich offensive armamentarium through which, if frustrated in their attempts to engulf and phagocytose biofilms, they can trigger the destruction of periprosthetic bone. This study speculates on how neutrophils interact with biofilms in the dramatic scenario of implant infections, also considering the implications of this interaction in view of the design of new therapeutic strategies and functionalized biomaterials, to help neutrophils in their arduous task of managing biofilms.

Searching for Virulence Factors among Staphylococcus lugdunensis Isolates from Orthopedic Infections: Correlation of ß-hemolysin, hemolysin III, and slush Genes with Hemolytic Activity and Synergistic Hemolytic Activity.

Staphylococcus lugdunensis is an emerging high-virulent pathogen. Here, the presence and expression of virulence genes (icaA, fbl, vwbl, fbpA, slush A, B and C, and genes of the putative ß-hemolysin and hemolysin III) and the ability to induce synergistic hemolytic activity and hemolysis after 24, 48 and 72 h were investigated in a collection of twenty-two S. lugdunensis clinical isolates. The collection of isolates, mainly from implant orthopedic infections, had previously been grouped by ribotyping/dendrogram analysis and studied for biofilm matrices, biomasses and antibiotic resistances. Two isolates, constituting a unique small ribogroup sharing the same cluster, exhibited an amplicon size of the slush operon (S. lugdunensis synergistic hemolysin) which was shorter than the expected 977 bp. This outcome can predict the genetic lineage of the S. lugdunensis strains. One isolate (cra1342) presented two deletions: one of 90 bp in slush A and the other of 91 bp in slush B. Another isolate (N860314) showed a single 193 bp deletion, which encompassed part of the slush B terminal sequence and most of slush C. The isolate N860314 was devoid of hemolytic activity after 24 h, and the first consideration was that the deleted region deals with the coding of the active enzymatic site of the slush hemolysin. On the other hand, cra1342 and N860314 isolates with different slush deletions and with hemolytic activity after 24 and 48 h, respectively, could have replaced the hemolytic phenotype through other processes.

Synthesis, Crystal Structure, and Antibacterial Properties of Silver-Functionalized Low-Dimensional Layered Zirconium Phosphonates.

New insoluble layered zirconium phosphate carboxyaminophosphonates (ZPs), with the general formula Zr2(PO4)H5[(O3PCH2)2N(CH2)nCOO]2·mH2O (n = 3, 4, and 5), have been prepared and characterized. The crystal structure for n = 3 and 4 samples was determined ab initio from X-ray powder diffraction data. The structure for n = 3 was monoclinic in space group C2/c with the following unit cell parameters: a = 34.346(1) Å, b = 8.4930(2) Å, c = 9.0401(2) Å, and ß = 97.15(1)°. The structure for n = 4 was triclinic in space group P1̅ with the following unit cell parameters: a = 17.9803(9) Å, b = 8.6066(4) Å, c = 9.0478(3) Å, α = 90.466(3)°, ß = 94.910(4)°, and γ = 99.552(4)°. The two structures had the same connectivity as Zr phosphate glycine diphosphonate (n = 1), as previously reported. By intercalation of short amines, these layered compounds were exfoliated in single lamella or packets of a few lamellae, which formed colloidal dispersions in water. After a thorough characterization, the dispersed lamellae were functionalized with Ag nanoparticles, which were grown in situ on the surface of exfoliated lamellae. Finally, their antimicrobial activity was tested on several Gram-positive and Gram-negative bacteria. All of these systems were found to be active against the four pathogens most frequently isolated from orthopedic prosthetic infections and often causative of nosocomial infections. Interestingly, they were found to express powerful inhibitory activity even against bacterial strains exhibiting a relevant profile of antibiotic resistance such as Staphylococcus aureus ATCC 700699.

Colonization and Infection of Indwelling Medical Devices by Staphylococcus aureus with an Emphasis on Orthopedic Implants.

The use of indwelling medical devices has constantly increased in recent years and has revolutionized the quality of life of patients affected by different diseases. However, despite the improvement of hygiene conditions in hospitals, implant-associated infections remain a common and serious complication in prosthetic surgery, mainly in the orthopedic field, where infection often leads to implant failure. Staphylococcus aureus is the most common cause of biomaterial-centered infection. Upon binding to the medical devices, these bacteria proliferate and develop dense communities encased in a protective matrix called biofilm. Biofilm formation has been proposed as occurring in several stages-(1) attachment; (2) proliferation; (3) dispersal-and involves a variety of host and staphylococcal proteinaceous and non-proteinaceous factors. Moreover, biofilm formation is strictly regulated by several control systems. Biofilms enable staphylococci to avoid antimicrobial activity and host immune response and are a source of persistent bacteremia as well as of localized tissue destruction. While considerable information is available on staphylococcal biofilm formation on medical implants and important results have been achieved on the treatment of biofilms, preclinical and clinical applications need to be further investigated. Thus, the purpose of this review is to gather current studies about the mechanism of infection of indwelling medical devices by S. aureus with a special focus on the biochemical factors involved in biofilm formation and regulation. We also provide a summary of the current therapeutic strategies to combat biomaterial-associated infections and highlight the need to further explore biofilm physiology and conduct research for innovative anti-biofilm approaches.

Comparison of Automated Ribotyping, spa Typing, and MLST in 108 Clinical Isolates of Staphylococcus aureus from Orthopedic Infections.

108 isolates of Staphylococcus aureus, belonging to six large ribogroups according to the automated Ribo-Printer® system, were studied with two highly used molecular methods for epidemiological studies, namely multi-locus sequence typing (MLST) and spa typing, followed by BURP and eBURST v3 analysis for clustering spa types and sequence (ST) types. The aim was to evaluate whether automated ribotyping could be considered a useful screening tool for identifying S. aureus genetic lineages with respect to spa typing and MLST. Clarifying the relationship of riboprinting with these typing methods and establishing whether ribogroups fit single clonal complexes were two main objectives. Further information on the genetic profile of the isolates was obtained from agr typing and the search for the mecA, tst genes, and the IS256 insertion sequence. Automated ribotyping has been shown to predict spa clonal complexes and MLST clonal complexes. The high cost and lower discriminatory power of automated ribotyping compared to spa and MSLT typing could be an obstacle to fine genotyping analyzes, especially when high discriminatory power is required. On the other hand, numerous advantages such as automation, ease and speed of execution, stability, typeability and reproducibility make ribotyping a reliable method to be juxtaposed to gold standard methods.

Tracing the origins of extracellular DNA in bacterial biofilms: story of death and predation to community benefit.

Extracellular DNA (eDNA) is a macromolecule copiously found in various natural microenvironments, but its origin and significance still remain partly mysterious phenomena. Here, the multifaceted origins of eDNA in bacterial biofilms are explored. The release of eDNA can follow a suicidal programmed bacterial apoptosis or a fratricide-induced death, under the control of quorum sensing systems or triggered by specific stressors. eDNA can be released into the extracellular space or as a free macromolecule or enclosed within membrane vesicles or even through an explosion of bubbles. eDNA can also be derived from host tissue cells through bacterial cytolytic/proapoptotic toxins or stolen from neutrophil extracellular traps (NETs). eDNA can alternatively be produced by lysis-independent mechanisms. Sub-inhibitory doses of antibiotics, by killing a fraction of bacteria, result in stimulating the release of eDNA. Even phages appear to play a role in favoring eDNA release. Unveiling the origins of eDNA is critical to correctly address biofilm-associated infections.

Extracellular DNA (eDNA). A Major Ubiquitous Element of the Bacterial Biofilm Architecture.

After the first ancient studies on microbial slime (the name by which the biofilm matrix was initially indicated), multitudes of studies on the morphology, composition and physiology of biofilms have arisen. The emergence of the role that biofilms play in the pathogenesis of recalcitrant and persistent clinical infections, such as periprosthetic orthopedic infections, has reinforced scientific interest. Extracellular DNA (eDNA) is a recently uncovered component that is proving to be almost omnipresent in the extracellular polymeric substance (EPS) of biofilm. This macromolecule is eliciting unprecedented consideration for the critical impact on the pathogenesis of chronic clinical infections. After a systematic review of the literature, an updated description of eDNA in biofilms is presented, with a special focus on the latest findings regarding its fundamental structural role and the contribution it makes to the complex architecture of bacterial biofilms through interactions with a variety of other molecular components of the biofilm matrix.

Various biofilm matrices of the emerging pathogen Staphylococcus lugdunensis: exopolysaccharides, proteins, eDNA and their correlation with biofilm mass.

Staphylococcus lugdunensis is an emerging high-virulent pathogen causative of hospital-acquired infections. Biofilm formation is a complex pathogenic process that leads to well-established bacterial communities. There is a paucity of data on the composition of the biofilm matrix among S. lugdunensis strains. Here, twenty-two S. lugdunensis clinical isolates, mainly from orthopaedic infections but also from other clinical sources, were sub-grouped by ribotyping and dendrogram analysis. Biofilms were analysed by fluorimetric methods based on FITC-Wheat Germ Agglutinin, SYPRO Ruby and TOTO-1 dyes to detect exopolysaccharides, proteins and extracellular DNA (eDNA), respectively. Biofilm morphology was investigated under confocal laser scanning microscopy (CLSM). Isolates displayed intriguing diversities in biofilm mass and matrix composition. The content of exopolysaccharides was found to be to be strongly associated with the biofilm mass (R2 = 0.882), while the content of proteins turned out to be weakly (R2 = 0.465) and that of eDNA very weakly associated (R2 = 0.202) to the biofilm mass.

Hijacking of immune defences by biofilms: a multifront strategy.

Biofilm formation by pathogens and opportunistic bacteria is the basis of persistent or recurrent infections. Up to 80% of bacterial infections in humans are associated with biofilms. Despite the efficiency of the evolved and complex human defence system against planktonic bacteria, biofilms are capable of subverting host defences. The immune system is not completely effective in opposing bacteria and preventing infection. Increasing attention is being focussed on the mechanisms enabling bacterial biofilms to skew the coordinate action of humoral and cell mediated responses. Knowledge of the interactions between biofilm bacteria and the immune system is critical to effectively address biofilm infections, which have multiplied over the years with the spread of biomaterials in medicine. In this article, the latest information on the interactions between bacterial biofilms and immune cells is examined and the areas where of information is still lacking are explored.

Biofilm-based implant infections in orthopaedics.

The demand for joint replacement surgery is continuously increasing with rising costs for hospitals and healthcare systems. Staphylococci are the most prevalent etiological agents of orthopedic infections. After an initial adhesin-mediated implant colonization, Staphylococcus aureus and Staphylococcus epidermidis produce biofilm. Biofilm formation proceeds as a four-step process: (1) initial attachment of bacterial cells; (2) cell aggregation and accumulation in multiple cell layers; (3) biofilm maturation and (4) detachment of cells from the biofilm into a planktonic state to initiate a new cycle of biofilm formation elsewhere. The encasing of bacteria in biofilms gives rise to insuperable difficulties not only in the treatment of the infection, but also in assessing the state and the nature of the infection using traditional cultural methods. Therefore, DNA-based molecular methods have been developed to provide rapid identification of all microbial pathogens. To combat biofilm-centered implant infections, new strategies are being developed, among which anti-infective or infective-resistant materials are at the forefront. Infection-resistant materials can be based on different approaches: (i) modifying the biomaterial surface to give anti-adhesive properties, (ii) doping the material with antimicrobial substances, (iii) combining anti-adhesive and antimicrobial effects in the same coating, (iv) designing materials able to oppose biofilm formation and support bone repair.

Emerging Issues and Initial Insights into Bacterial Biofilms: From Orthopedic Infection to Metabolomics.

Bacterial biofilms, enigmatic communities of microorganisms enclosed in an extracellular matrix, still represent an open challenge in many clinical contexts, including orthopedics, where biofilm-associated bone and joint infections remain the main cause of implant failure. This study explores the scenario of biofilm infections, with a focus on those related to orthopedic implants, highlighting recently emerged substantial aspects of the pathogenesis and their potential repercussions on the clinic, as well as the progress and gaps that still exist in the diagnostics and management of these infections. The classic mechanisms through which biofilms form and the more recently proposed new ones are depicted. The ways in which bacteria hide, become impenetrable to antibiotics, and evade the immune defenses, creating reservoirs of bacteria difficult to detect and reach, are delineated, such as bacterial dormancy within biofilms, entry into host cells, and penetration into bone canaliculi. New findings on biofilm formation with host components are presented. The article also delves into the emerging and critical concept of immunometabolism, a key function of immune cells that biofilm interferes with. The growing potential of biofilm metabolomics in the diagnosis and therapy of biofilm infections is highlighted, referring to the latest research.

Exploring the anticancer effects of standardized extracts of poplar-type propolis: In vitro cytotoxicity toward cancer and normal cell lines.

Propolis was shown to exert antimicrobial, antioxidant, anti-inflammatory, and anticancer activities. Its composition is influenced by seasonal, climatic and phytogeographic conditions. Further variability derives from the extraction methods. Multi Dynamic Extraction Method (MED) has been recently proposed to improve extracts reproducibility. Here, the cytotoxic/anticancer activity of three MED extracts of poplar-type propolis was assayed on human promyelocytic leukaemia HL60, human monocytic leukaemia THP-1, human osteosarcoma MG63, murine fibroblast L929 and human mesenchymal cells (hMSCs). As far as we are aware of, MG63 cells have never been challenged with propolis before, while few studies have so far addressed the effects of propolis on non-tumor cell lines. Consistent results were observed for all propolis preparations. The extracts turned out mildly cytotoxic toward cancer cells, in particular osteosarcoma cells (IC50: 81.9-86.7 µg/ml). Nonetheless, cytotoxicity was observed also in non-tumor L929 cells, with an even lower IC50. hMSCs demonstrated the lowest sensitivity to propolis (IC50: 258.3-287.2 µg/ml). In THP-1 cells, extracts were found to stimulate apoptosis caspase 3/7 activity. The IC50 values observed with osteosarcoma and leukaemia cells do not support a relevant cytotoxicity (as the figures abundantly exceeded 30 µg/ml), despites some selective activity exhibited with HL60 cells. The results confirm the validity of the extraction method, emphasizing the need to assess the selectivity of the interaction with cancer cells when screening for anticancer-drug candidates.

Current methods for molecular epidemiology studies of implant infections.

Over the last few decades, the number of surgical procedures involving prosthetic materials has greatly multiplied, along with the rising medical and economic impact of implant-associated infections. The need to appropriately counteract and deal with this phenomenon has led to growing efforts to elucidate the etiology, pathogenesis and epidemiology of these types of infections, characterized by opportunistic pathogens. Molecular epidemiology studies have progressively emerged as a leading multitask tool to identify and fingerprint bacterial strains, unveil the complex clonal nature of important pathogens, detect outbreak events, track the origin of the infections, assess the clinical significance of individual strain types, survey their distribution, recognize associations of strain types with specific virulence determinants and/or pathological conditions, assess the role played by the specific components of the virulon, and reveal the phylogeny and the mechanisms through which new strain types have emerged. Despite the many advances that have been made thanks to these flourishing new approaches to molecular epidemiology, a number of critical aspects remain challenging. In this paper, we briefly discuss the current limitations and possible developments of molecular epidemiology methods in the investigation and surveillance of implant infections.

Influence of material and microtopography on the development of local infection in vivo: experimental investigation in rabbits.

Polishing the surface of internal fracture fixation (IFF) implant materials can ease implant removal and reduce irritation to gliding tissues by reducing soft tissue adhesion and bony overgrowth. Thus, polishing the surface of these implants is expected to have significant clinical benefit in certain situations. The aim of the present study was to determine if polishing the surface of an IFF device influences susceptibility to infection. The local infection rate associated with 4-hole 2.0 mm Synthes locking compression plates (LCPs) composed of clinically available commercially pure titanium (cpTi) and titanium aluminium niobium (TAN) in their standard microrough form was compared with that of their test polished equivalents and also to clinically available electropolished stainless steel (EPSS). The LCPs were fixed in locking mode onto the tibia of mature, female New Zealand White rabbits and a clinical strain of Staphylococcus aureus was added to the implantation site. Twenty eight days after surgery the rabbits were euthanized and assessed for infection. The rank order based on descending ID50 was; polished TAN, standard TAN, standard cpTi, EPSS and finally polished cpTi, however, the ID50 values did not differ greatly between the groups with the same material. Using the LCP model in locking mode, polishing the surface of both cpTi and TAN was not found to influence the susceptibility to infection in our animal model.

Description of a new group of variants of the Staphylococcus aureus elastin-binding protein that lacks an entire DNA segment of 180 bp.

The elastin-binding protein (EbpS) is a microbial surface component recognizing adhesive matrix molecule (MSCRAMM) found in Staphylococcus aureus that mediates bacterial cell binding to soluble elastin and tropoelastin. In scientific literature it is well established that the gene encoding for the elastin-binding protein (ebpS) is present in the vast majority of Staphylococcus aureus clinical isolates. The present study aimed at investigating a group of new variant forms of ebpS gene identified in S. aureus clinical strains isolated from implant-related orthopedic infections. A PCR screening for the ebpS gene, conducted on over two hundred S. aureus clinical isolates from implant-related infections revealed the detection of six strains exhibiting an altered amplicon size, shorter than expected. In order to elucidate the sequence changes present in these gene variants, the trait comprised between the primers was analyzed in all six isolates bearing the modification and in four isolates exhibiting the regular amplicon size. A similar form of the ebpS gene, lacking a DNA trait of 180 bp, was confirmed in all six isolates independently of their clonal origin. Interestingly, only three of these isolates, all with type IV polymorphism of the accessory genes regulator (agr) locus, showed exactly the same sequence and, thus, the same pattern of point mutations with respect to reference strains. From nucleotide translation, the corresponding encoded protein was found to lack an entire peptide segment of 60 amino acids. From nucleotide sequence translation, this modification was found to implicate the disappearance of an entire hydrophobic domain, whose functional significance needs to be further investigated.

Panton-Valentine leukocidin gene detected in Staphylococcus aureus strain isolated from a knee arthroprosthesis infection.

This report focuses on the molecular characterization of a Staphylococcus aureus strain isolated from a knee arthroprosthesis infection and recognized retrospectively as a carrier of the Panton-Valentine leukocidin gene. The stored microbiological isolate, which belonged to the strain collection of the Research Unit on Implant Infections of the Rizzoli Orthopaedic Institute, was retrieved for molecular analysis. Genotyping was carried out, revealing an interesting profile. In addition to the positivity for the Panton-Valentine toxin gene, the results indicated that the isolate belonged to the agr III group and was endowed with bbp and cna genes, both encoding for staphylococcal adhesins that bind bone proteins. The strain had the mecA gene for methicillin resistance, even though it was unable to resist any of the beta-lactam or other antibiotics. Its gene configuration matched that of other community-acquired methicillin-resistant and methicillin-susceptible Staphylococcus aureus(CA-MRSA and CA-MSSA) strains which have recently been reported worldwide. As far as we know,this is the first report on a PVL-positive S. aureus strain associated with an orthopedic implant (knee arthroprosthesis) infection.

Zirconium Carboxyaminophosphonate Nanosheets as Support for Ag Nanoparticles.

A layered insoluble inorganic-organic solid, namely zirconium phosphate glycine-N,N-bismethylphosphonate, was used to prepare dispersions of nanosheets to support active metals such as metallic silver nanoparticles and zinc ions. Zr phosphate-phosphonate microcrystals were first exfoliated with methylamine to produce a stable colloidal dispersion and then the methylamine was removed by treatment with hydrochloric acid. The obtained colloidal dispersion of Zr phosphate-phosphonate nanosheets was used to immobilize silver or zinc cations, via ion exchange, with the acidic protons of the sheets. The layered matrix showed a great affinity for the metal cations up taking all the added cations. The treatment of the dispersions containing silver ions with ethanol yielded metal silver nanoparticles grafted on the surface of the layered host. The samples were characterized by X-ray powder diffraction, elemental analysis transmission electron microscopy, and selected samples were submitted to antimicrobial tests. The nanocomposites based on Ag nanoparticles showed good bactericidal properties against the bacterial reference strain Staphylococcus epidermidis (S. epidermidis).