Impact of Water-Induced Soil Erosion on the Terrestrial Transport and Atmospheric Emission of Mercury in China.

Terrestrial mercury (Hg) transport, induced by water erosion and exacerbated by human activities, constitutes a major disturbance of the natural Hg cycle, but the processes are still not well understood. In this study, we modeled these processes using detailed information on erosion and Hg in soils and found that vast quantities of total Hg (THg) are being removed from land surfaces in China as a result of water erosion, which were estimated at 420 Mg/yr around 2010. This was significantly higher than the 240 Mg/yr mobilized around 1990. The erosion mechanism excavated substantial soil THg, which contributed to enhanced Hg(0) emissions to the atmosphere (4.9 Mg/yr around 2010) and its transport horizontally into streams (310 Mg/yr). Erosion-induced THg transport was driven by the extent of precipitation but was further enhanced or reduced by vegetation cover and land use changes in some regions. Surface air temperature may exacerbate the horizontal THg release into water. Our analyses quantified the processes of erosion-induced THg transport in terrestrial ecosystems, demonstrated its importance, and discussed how this transport is impacted by anthropogenic inputs and legacy THg in soils. We suggest that policy makers should pay more attention to legacy anthropogenic THg sources buried in soil.

Atmosphere-dependent combustion of Ganoderma lucidum biomass toward its enhanced transformability into green energy.

Globally, the circular efficiency of biomass resources has become a priority due to the depletion and negative environmental impacts of fossil fuels. This study aimed to quantify the atmosphere-dependent combustion of Ganoderma lucidum (GL) biomass and its thermodynamic and kinetic parameters toward enhancing its circularity and transformability characteristics. The GL combustion occurred in the three stages of moisture removal, volatile release, and coke combustion. Combustion performance characteristics were more favorable in the N2/O2 atmosphere than in the CO2/O2 atmosphere under the same heating rates. The rising heating rate facilitated the release of volatiles. According to the model-free methods of Ozawa-Flynn-Wall and Kissinger-Akahira-Sunose, the activation energies essential for the primary reaction were 283.09 kJ/mol and 288.28 kJ/mol in the N2/O2 atmosphere and 233.09 kJ/mol and 235.64 kJ/mol in the CO2/O2 atmosphere. The gaseous products of the GL combustion included CH4, H2O, C = O, CO, CO2, NH3, C = C, and C-O(H). Ash prepared in both atmospheres exhibited a tendency for slag formation, with oxy-fuel combustion lowering its risk. This study thus provides a theoretical and practical basis for transforming GL residues into a sustainable energy source.

Source-oriented probabilistic health risk assessment of soil potentially toxic elements in a typical mining city.

Identifying potential sources of soil potentially toxic elements (PTEs) and developing source-oriented health risk assessments in typical mining cities are key for pollution prevention and risk management. To this end, a case study was conducted to explore the pollution characteristics, potential sources, and human health risks of PTEs in Daye City, China. Indices, including the pollution factor (PF), pollution load index (PLI), and geo-accumulation index (Igeo), were applied to assess PTE pollution. Cd had the highest value among the detected PTEs, and 82.93% of the sampling sites had moderate pollution levels, with the highest mean Igeo value for Cd (2.30). Four potential sources were determined. Cr and Ni originated mainly from natural sources. Zn (91.5%) was exclusively and then Cd (33.1%) was moderately derived from industrial activities. The mixed source of various mineral exploitation smelting, and coal-fired traffic emissions leaded to the accumulation of As, Cd, and Pb. Cu was associated with Cu-related mining and smelting activities. The probabilistic health risk assessment indicated that the non-carcinogenic risks for populations were negligible. Overall, this work provides scientific information for environmental managers to manage soil PTE pollution through the effective management of anthropogenic sources with limited resources and costs.

Highly efficient removal of thallium(I) by facilely fabricated amorphous titanium dioxide from water and wastewater.

In this study, amorphous hydrous titanium dioxide was synthesized by a facile precipitation method at room temperature, aiming to effectively remove thallium(I) from water. The titanium dioxide prepared using ammonia as precipitant (TiO2I) is more effective for thallium(I) uptake than the one synthesized with sodium hydroxide (TiO2II). The TiO2 obtained particles are amorphous, aggregates of many nanoparticles and irregular in shape. The thallium(I) uptake increases with the rise of solution pH value. Under neutral pH conditions, the maximal thallium(I) adsorption capacities of TiO2I and TiO2II are 302.6 and 230.3 mg/g, respectively, outperforming most of the reported adsorbents. The amorphous TiO2 has high selectivity towards thallium(I) in the presence of multiple cations such as K+, Ca2+, Mg2+, Zn2+ and Ni2+. Moreover, the TiO2I is efficient in removing thallium(I) from real river water and mining wastewater. Additionally, the spent TiO2I can be regenerated using hydrochloric acid solution and reused. The Tl(I) adsorption is achieved via replacing the H+ in hydroxyl group on the surface of TiO2 and forming inner-sphere surface complexes. Owing to its high efficiency, facile synthesis and environmental friendliness, the TiO2I has the potential to be used as an alternative adsorbent to remove Tl(I) from water.

Leaching Characteristics of Heavy Metals in the Baghouse Filter Dust from Direct-Fired Thermal Desorption of Contaminated Soil.

After thermal desorption, the total amount of heavy metals (HMs) is enriched in baghouse filter dust. To further understand the related environmental impact, the leaching characteristics under various conditions must be explored. Therefore, this study aimed to examine the leaching characteristics of seven HMs in the dust generated in the direct-fired thermal desorption process and to compare the differences in heavy metal leaching characteristics in the soil before and after thermal desorption. The leaching characteristics and bioaccessibility of seven HMs-arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn)-were analyzed in dust and in soil before and after thermal desorption. The activity of HMs in dust was strong. Therefore, environmental effects and effects on human health should be considered in the treatment of soil and dust after thermal desorption.

Rice life cycle-based global mercury biotransport and human methylmercury exposure.

Protecting the environment and enhancing food security are among the world's greatest challenges. Fish consumption is widely considered to be the single significant dietary source of methylmercury. Nevertheless, by synthesizing data from the past six decades and using a variety of models, we find that rice could be a significant global dietary source of human methylmercury exposure, especially in South and Southeast Asia. In 2013, globalization caused 9.9% of human methylmercury exposure via the international rice trade and significantly aggravated rice-derived exposure in Africa (62%), Central Asia (98%) and Europe (42%). In 2016, 180 metric tons of mercury were generated in rice plants, 14-fold greater than that exported from oceans via global fisheries. We suggest that future research should consider both the joint ingestion of rice with fish and the food trade in methylmercury exposure assessments, and anthropogenic biovectors such as crops should be considered in the global mercury cycle.