RESUMO
BACKGROUND AND OBJECTIVES: To evaluate the potential benefits of Bacteroides fragilis 839 (BF839), a next-generation probiotics, in reducing myelosuppression and gastrointestinal toxicity associated with chemotherapy in breast cancer patient. METHODS AND STUDY DESIGN: 40 women with early breast cancer were randomly assigned to the BF839 (n=20) or placebo (n=20) during the administration of adjuvant chemotherapy (4 cycles of epirubicin 100mg/m2 and cyclophosphamide 600mg/m2). Myelosuppression and gastrointestinal adverse effects were monitored in both groups. RESULTS: Throughout the four treatment cycles, the percentage of patients experiencing myelosuppression was 42.5% in the BF839 group, significantly lower than the 66.3% observed in the control group (p=0.003). Two patients in the BF839 group and three patients in the placebo group received recombinant human granulocyte colony-stimulating factor (rhG-CSF) due to leuko-penia/neutropenia. When considering an ITT analysis, which included all patients regardless of rhG-CSF treatment, the BF839 group exhibited less reduction from baseline in white blood cells (-0.31±1.19 vs -1.15±0.77, p=0.012) and neutrophils (0.06±1.00 vs -0.84±0.85, p=0.004) compared to the placebo group. The difference became even more significant when excluding the patients who received rhG-CSF injections. Throughout the four treatment cycles, compared to the placebo group, the BF839 group had significantly lower rates of 3-4 grade nausea (35.0% vs 71.3%, p=0.001), vomiting (20.0% vs 45.0%, p=0.001), and diarrhea (15.0% vs 30.0%, p=0.023). CONCLUSIONS: These findings suggest that BF839 has the potential to effectively mitigate myelosuppression and gastrointestinal toxicity associated with chemotherapy in breast cancer patients.
Assuntos
Antineoplásicos , Neoplasias da Mama , Feminino , Humanos , Antineoplásicos/efeitos adversos , Bacteroides fragilis , Neoplasias da Mama/tratamento farmacológico , Ciclofosfamida/efeitos adversos , Epirubicina/efeitos adversos , Fator Estimulador de Colônias de Granulócitos/uso terapêutico , Proteínas Recombinantes/uso terapêuticoRESUMO
S100B is a biomarker of nervous system injury, but it is unknown if it is also involved in vascular injury. In the present study, we investigated S100B function in vascular remodeling following injury. Balloon injury in rat carotid artery progressively induced neointima formation while increasing S100B expression in both neointimal vascular smooth muscle (VSMC) and serum along with an induction of proliferating cell nuclear antigen (PCNA). Knockdown of S100B by its shRNA delivered by adenoviral transduction attenuated the PCNA expression and neointimal hyperplasia in vivo and suppressed PDGF-BB-induced VSMC proliferation and migration in vitro. Conversely, overexpression of S100B promoted VSMC proliferation and migration. Mechanistically, S100B altered VSMC phenotype by decreasing the contractile protein expression, which appeared to be mediated by NF-κB activity. S100B induced NF-κB-p65 gene transcription, protein expression and nuclear translocation. Blockade of NF-κB activity by its inhibitor reversed S100B-mediated downregulation of VSMC contractile protein and increase in VSMC proliferation and migration. It appeared that S100B regulated NF-κB expression through, at least partially, the Receptor for Advanced Glycation End products (RAGE) because RAGE inhibitor attenuated S100B-mediated NF-κB promoter activity as well as VSMC proliferation. Most importantly, S100B secreted from VSMC impaired endothelial tube formation in vitro, and knockdown of S100B promoted re-endothelialization of injury-denuded arteries in vivo. These data indicated that S100B is a novel regulator for vascular remodeling following injury and may serve as a potential biomarker for vascular damage or drug target for treating proliferative vascular diseases.
Assuntos
Músculo Liso Vascular/metabolismo , Miócitos de Músculo Liso/metabolismo , Neointima/metabolismo , Subunidade beta da Proteína Ligante de Cálcio S100/biossíntese , Remodelação Vascular , Animais , Regulação da Expressão Gênica , Músculo Liso Vascular/lesões , Músculo Liso Vascular/patologia , Miócitos de Músculo Liso/patologia , Neointima/patologia , Ratos , Ratos Sprague-Dawley , Receptor para Produtos Finais de Glicação Avançada/metabolismo , Fator de Transcrição RelA/metabolismoRESUMO
BACKGROUND: The fatigue that users suffer when using steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) can cause a number of serious problems such as signal quality degradation and system performance deterioration, users' discomfort and even risk of photosensitive epileptic seizures, posing heavy restrictions on the applications of SSVEP-based BCIs. Towards alleviating the fatigue, a fundamental step is to measure and evaluate it but most existing works adopt self-reported questionnaire methods which are subjective, offline and memory dependent. This paper proposes an objective and real-time approach based on electroencephalography (EEG) spectral analysis to evaluate the fatigue in SSVEP-based BCIs. METHODS: How the EEG indices (amplitudes in δ, θ, α and ß frequency bands), the selected ratio indices (θ/α and (θ + α)/ß), and SSVEP properties (amplitude and signal-to-noise ratio (SNR)) changes with the increasing fatigue level are investigated through two elaborate SSVEP-based BCI experiments, one validates mainly the effectiveness and another considers more practical situations. Meanwhile, a self-reported fatigue questionnaire is used to provide a subjective reference. ANOVA is employed to test the significance of the difference between the alert state and the fatigue state for each index. RESULTS: Consistent results are obtained in two experiments: the significant increases in α and (θ + α)/ß, as well as the decrease in θ/α are found associated with the increasing fatigue level, indicating that EEG spectral analysis can provide robust objective evaluation of the fatigue in SSVEP-based BCIs. Moreover, the results show that the amplitude and SNR of the elicited SSVEP are significantly affected by users' fatigue. CONCLUSIONS: The experiment results demonstrate the feasibility and effectiveness of the proposed method as an objective and real-time evaluation of the fatigue in SSVEP-based BCIs. This method would be helpful in understanding the fatigue problem and optimizing the system design to alleviate the fatigue in SSVEP-based BCIs.
Assuntos
Interfaces Cérebro-Computador , Eletroencefalografia/métodos , Potenciais Evocados Visuais , Fadiga/diagnóstico , Adulto , Análise de Variância , Epilepsia/patologia , Humanos , Estimulação Luminosa , Processamento de Sinais Assistido por Computador , Transdução de Sinais , Razão Sinal-Ruído , Inquéritos e Questionários , Fatores de Tempo , Adulto JovemRESUMO
By density functional theory calculations, the scanning tunneling microscopy (STM) images of various hydrogen clusters adsorbed on bilayer-graphene are systematically simulated. The hydrogen configurations of the STM images observed in the experiments have been thoroughly figured out. In particular, two kinds of hydrogen dimers (ortho-dimer, para-dimer) and two kinds of tetramers (tetramer-A, -B) are determined to be the hydrogen configurations corresponding to the ellipsoidal-like STM images with different structures and sizes. One particular hexamer (hexamer-B) is the hydrogen configuration generating the star-like STM images. For each hydrogen cluster, the simulated STM images show unique voltage-dependent features, which provides a feasible way to determine hydrogen adsorption states on graphene or graphite surface in the experiments by varying-voltage measurements. Stability analysis proves that the above determined hydrogen configurations are quite stable on graphene, hence they are likely to be detected in the STM experiments. Consequently, through systematic analysis of the STM images and the stability of hydrogen clusters on bilayer graphene, many experimental observations have been consistently explained.
RESUMO
This study estimates the impact of green technology innovation and its interaction terms on CO2 emission, by using the random and fixed effect estimate method, employs panel data of the G7 and BRICS countries from 1990 to 2019. The regression results show that a single type of green technological innovation has not a significant inhibitory effect on CO2 emissions. The interaction of the two types of green technological innovations has a significant effect on the decrease of CO2. Moreover, the study test the difference effect of green technological innovations on CO2 emission among the G7 and BRICS countries. Furthermore, we also choose appropriate instrument variables to deal with the endogenesis of the model and examine model robustness. The findings demonstrate that the empirical conclusions can hold true in the test. Based on the findings above, we puts forward a few policy recommendations for G7 countries and BRICS countries to reduce carbon dioxide emissions.
RESUMO
The aim of this study was to investigate the protective effect of paeonol (pae) on an angiotensin II (AngII)-induced cardiac hypertrophy mouse model. First, AngII mouse models were constructed and randomly grouped into the control (con), AngII, and AngII + Pae groups. Compared with that in the blank group, the surface area of myocardial cells in the AngII group increased significantly. In contrast to that in the AngII group, the cardiomyocyte surface area in the Pae group was significantly reduced. Ultrasound results showed that the myocardial function of mice in the AngII group was decreased compared with that in the Con group, while the myocardial function of mice in the Pae treatment was significantly improved. Moreover, the Fe2+ and lipid peroxide levels of primary cardiomyocytes were significantly increased after treatment with AngII and were significantly decreased after the addition of Pae. Compared with those in the Con group, cristae were reduced and the outer membrane was lost in the myocardial tissues of the AngII group, and myocardial MDA, ROS, and Fe2+ levels were increased. However, myocardial damage was significantly alleviated after Pae treatment, and myocardial MDA, ROS, and Fe2+ levels were reduced. Moreover, in myocardial tissue, AngII reduced the protein levels of xCT and GPX4, while the levels of both xCT and GPX4 were increased after Pae treatment. In conclusion, Pae protected the hearts of AngII mice by upregulating the protein expression of xCT and GPX4 and resisting AngII-induced ferroptosis in cardiomyocytes.
RESUMO
Polymer-based piezoelectric motors have excellent properties, such as lightweight and corrosion resistance. In addition, 3D printing and customized additive manufacturing of polymers provide new opportunities for the development of piezoelectric motors with complex or special structures. In this paper, a 3D printed polymer-based sandwich-type piezoelectric motor operating in a single longitudinal mode is developed. A vibration decomposition model of the motor and an analytical model considering polymer viscoelasticity are established to analyze the dynamic characteristics and to determine the geometric structure of the motor. To increase the coefficient of friction, a polymer surface texture is utilized on the contacts. The experimental results show that the friction coefficient of the contact tip with surface texture is about 0.16, which increased by 45.5% compared to a smooth surface. The resonance frequency is 28.648 kHz, and the maximum no-load speed under 300 Vp-p is 54 r/min. Our study shows the promise of polymer-based materials in the development of the piezoelectric motor.
RESUMO
In-plane bending traveling wave ultrasonic motors (USM), which are compact in structure and flexible in design, have been widely applied in biological engineering, optical engineering, and aerospace engineering. However, the high driving voltage and complicated driving circuit of this kind of USM restrict their further miniaturization and electromechanical integration in these applications and bring some potential safety hazards. To solve this problem, a low-voltage-driving traveling wave USM incorporating cofired multilayer piezoelectric ceramics was proposed in this work. Four cofired piezoelectric ceramics were strategically designed to excite two orthogonal third-order in-plane bending modes with the same frequency of the USM. The principles of traveling wave synthesis and low-voltage-driving of the USM were deduced, and the stator dynamic design and transient dynamic simulation were carried out by finite-element method. The microproperties of cofired piezoelectric multilayer ceramics, the vibration characteristics of the stator, and the mechanical output performance of the USM were tested by experiments. The results indicated that the motor can work as low as 5 [Formula: see text]. A long stroke with a maximum forward and reverse rotational speeds of 187.7 and 176.6 r/min were obtained, respectively, and a maximum stalling torque of 4.8 mN · m at 47.3 kHz under 15 [Formula: see text] was achieved. The results showed that the proposed USM is small, low in driving voltage, and high in torque output, which has promising applications in aerospace, biomedicine, and other fields that require a lightweight and integration of driving devices.
Assuntos
Ultrassom , Vibração , Cerâmica , Desenho de Equipamento , MiniaturizaçãoRESUMO
Existing 3-D intravascular ultrasound (IVUS) systems that combine two electromagnetic (EM) motors to drive catheters are bulky and require considerable efforts to eliminate EM interference (EMI). Here, we propose a new scanning method to realize 3-D IVUS imaging using a helical ultrasonic motor to overcome the aforementioned issues. The ultrasonic motor with compact dimensions (7-mm outer diameter and 30-mm longitudinal length), lightweight (20.5 g), and free of EMI exhibits a great application potential in mobile imaging devices. In particular, it can simultaneously perform rotary and linear motions, facilitating precise 3-D scanning of an imaging catheter. Experimental results show that the signal-to-noise ratio (SNR) of raw images obtained using the ultrasonic motor is 5.3 dB better than that of an EM motor. Moreover, the proposed imaging device exhibits the maximum rotary speed of 12.3 r/s and the positioning accuracy of 2.6 [Formula: see text] at a driving voltage of 240 Vp-p. The 3-D wire phantom imaging and 3-D tube phantom imaging are performed to evaluate the performance of the imaging device. Finally, the in vitro imaging of a porcine coronary artery demonstrates that the layered architecture of the vessel can be precisely identified while significantly increasing the SNR of the raw images.
Assuntos
Vasos Coronários , Ultrassom , Animais , Catéteres , Vasos Coronários/diagnóstico por imagem , Imageamento Tridimensional , Imagens de Fantasmas , Suínos , Ultrassonografia , Ultrassonografia de IntervençãoRESUMO
Galacto-oligosaccharides (GOS) are prebiotic compounds widely used for their health-promoting effects. Conventionally, GOS is produced by the enzymatic conversion of lactose in stirred tank reactors (STR). The high operational costs associated with enzyme inactivation and removal might be reduced by the application of enzyme membrane reactors (EMR). In this study, we aimed to assess the potential of continuous GOS production by EMR using soluble Biolacta N5, a Bacillus circulans-derived commercial enzyme preparation. The steady-state performance of the EMR equipped with an ultrafiltration module was investigated as function of residence time (1.1-2.8 h) and enzyme load (17-190 U·g-1) under fixed operational settings of temperature (50 °C), pH (6.0), lactose feed concentration (300 g·kg-1), and recirculation flow-rate (0.18 m3·h-1). Results indicate that the yield of oligosaccharides with higher degree of polymerization (DP3-6) in STR (approx. 38% on total carbohydrate basis) exceeds that measured in EMR (ranging from 24% to 33%). However, a stable catalytic performance without a significant deterioration in product quality was observed when operating the EMR for an extended period of time (> 120 h). Approx. 1.4 kg of DP3-6 was produced per one gram of crude enzyme preparation over the long-term campaigns, indicating that EMR efficiently recovers enzyme activity.
RESUMO
In bistable perception, constant input leads to alternating perception. The dynamics of the changing perception reflects the intrinsic dynamic properties of the "unconscious inferential" process in the brain. Under the same condition, individuals differ in how fast they experience the perceptual alternation. In this study, testing many forms of bistable perception in a large number of observers, we investigated the key question of whether there is a general and common mechanism or multiple and independent mechanisms that control the dynamics of the inferential brain. Bistable phenomena tested include binocular rivalry, vase-face, Necker cube, moving plaid, motion induced blindness, biological motion, spinning dancer, rotating cylinder, Lissajous-figure, rolling wheel, and translating diamond. Switching dynamics for each bistable percept was measured in 100 observers. Results show that the switching rates of subsets of bistable percept are highly correlated. The clustering of dynamic properties of some bistable phenomena but not an overall general control of switching dynamics implies that the brain's inferential processes are both shared and independent - faster in constructing 3D structure from motion does not mean faster in integrating components into an objects.
RESUMO
The structures, stabilities, and electronic properties of monolayer black phosphorus (M-BP) with different kinds of defects are investigated within the frame of density-functional theory. All the possible configurations of defects in M-BP are explored, and the calculated results suggest that the stabilities of the configurations with different kinds of defects are greatly related to broken bonds, structural deformation and the character of the bonding. The configurations with two or three vacancies are energetically more favorable than the ones with a single vacancy. Meanwhile, the doping of two foreign atoms, such as sulfur, silicon or aluminum, is more stable than that of the corresponding single dopant. The electronic properties of M-BP are greatly affected by the types of defects. The single S-doped M-BP not only retains the character of a direct semiconductor, but it also can enlarge the band gap by 0.24 eV relative to the perfect one. Such results reveal that the defects not only greatly affect the electronic properties, but they also can be used as an effective way to modulate the band gap for the different applications of M-BP in electronic devices.
RESUMO
The electronic structure of zigzag graphene nanoribbon (ZGNR) is studied using density functional theory. The mechanisms underlying the quantum-confinement effect and edge magnetism in ZGNR are systematically investigated by combining the simulated results and some useful analytic models. The quantum-confinement effect and the inter-edge superexchange interaction can be tuned by varying the ribbon width, and the spin polarization and direct exchange splitting of the edge states can be tuned by varying their electronic occupations. The two edges of ZGNR can be equally or unequally tuned by charge doping or Li adsorption, respectively. The Li adatom has a site-selective adsorption on ZGNR, and it is a nondestructive and memorable approach to effectively modify the edge states in ZGNR. These systematic understanding and effective tuning of ZGNR electronics presented in this work are helpful for further investigation and application of ZGNR and other magnetic graphene systems.
RESUMO
A critical problem in using steady-state visual evoked potential (SSVEP) based brain-computer interfaces (BCIs) for clinical and commercial use is the visual fatigue the user may suffer when staring at flashing stimuli. Aiming at the design of user-friendly BCIs with satisfactory performance, this work is to preliminarily investigate how different colors influence the SSVEP (i.e. frequency or phase) and system performance. The results show that white stimuli can lead to the highest performance, followed by gray, red, green and blue stimuli.