Do patients with bone bridge amputations have improved gait compared with patients with traditional amputations?

BACKGROUND: Two surgical techniques for performing a transtibial amputation include a traditional approach and a bone bridge approach. To date, there is no conclusive evidence of superiority of either technique in terms of temporal-spatial, kinetic, and mechanical work parameters. QUESTIONS/PURPOSES: We sought to compare instrumented three-dimensional gait parameters and mechanical work measurements of patients who had undergone a traditional or bone bridge amputation at the transtibial level. Residual limb length and its effect on those functional outcomes was a secondary interest irrespective of amputation type. METHODS: This retrospective comparative study included 14 active-duty military men with a mean age of 25 years (range, 20-28 years). Comparisons were made between seven patients with traditional and seven patients with bone bridge amputations at the transtibial level. The patients walked at self-selected and fast paces while three-dimensional gait analysis data were collected and comparisons were made between patients with the two amputation types as well as by length of the residual limb. RESULTS: With the numbers available, we observed no differences between the two surgical groups at either speed for the temporal-spatial parameters or mechanical work metrics. However, the bone bridge group did demonstrate greater rolloff vertical ground reaction force during the fast walking condition with a median 1.02% of body weight compared with 0.94% (p = 0.046), which suggests a more stable platform in terminal stance. When the two groups were combined into one to test the effect of residual limb length, the linear regression resulted in an R(2) value of 0.419 (p = 0.012), in which patients with longer residual limbs had improved F3 force values during self-selected walking. CONCLUSIONS: Overall, limited functional differences were found between the two groups in this small pilot study, so a superior surgical technique could not be determined; whereas our limited sample size prevents a firm conclusion of no difference, our data can be considered hypothesis-generating for future, larger studies. Although some evidence indicated that patients with a bone bridge have improved loading at higher speeds, a regression of all patients walking at self-selected speed indicates that as residual limb length increases, loading increases regardless of amputation type. Thus, our data suggest it is important to preserve residual limb length to allow for improved loading in terminal stance.

An analysis of shoulder outcomes scores in 275 consecutive patients: disease-specific correlation across multiple shoulder conditions.

OBJECTIVES: To determine the outcomes scores of military patients who initially present with a variety of shoulder conditions, identify which scores demonstrate the highest correlation per diagnosis, and determine if a difference exists for patients who went onto surgery. METHODS: Two-hundred and seventy five consecutive patients with mean age of 36.5 +/- 12.9 at presentation completed baseline outcomes assessments that included Single Assessment Numeric Evaluation (SANE), American Shoulder and Elbow Surgeons (ASES) Score, Western Ontario Shoulder Instability Index (WOSI), Western Ontario Rotator Cuff Index (WORC), the Simple Shoulder Test (SST), and the Disabilities of the Arm, Shoulder, and Hand Index (DASH). The patients were grouped by clinical, radiographic, and surgical findings into 10 diagnostic categories. OUTCOMES: The initial mean outcomes scores were SANE 48.8, ASES 50.1, WOSI 1279 (40% normal), WORC 1122.4 (47% normal), SST 6.7, and DASH 33.1. Patients with superior labrum anterior-posterior tears demonstrated the lowest mean scores, followed by instability and rotator cuff tear patients. For all conditions, scores were lower for patients who went onto surgery compared with those managed nonoperatively (p = 0.008). CONCLUSIONS: Our findings may be utilized as a baseline to compare and track patient-derived disability across multiple shoulder conditions and serve to define mean diagnosis-specific shoulder patient preoperative scores.

Analysis and comparison of the biomechanical properties of univalved and bivalved cast models.

PURPOSE: Fiberglass casts are frequently valved to relieve the pressure associated with upper extremity swelling after a surgical procedure or when applied after reduction of a displaced fracture in a child. Although different opinions exist regarding the valving of casts, no research to date has explored the biomechanical effects of this commonly used technique. As cast integrity is essential for the maintenance of fracture reduction, it is important to understand whether casts are structurally compromised after valving. Understanding the effects of valving on cast integrity may help guide clinicians in the technique of valving while minimizing the potential for a loss of fracture reduction. METHODS: Thirty standardized cylindrical fiberglass cast models were created. Ten models were left intact, 10 were univalved, and 10 were bivalved. All the models were mechanically tested by a 3-point bending apparatus secured to a biaxial materials testing system. Load to failure and bending stiffness were recorded for each sample. Differences in load of failure and bending stiffness were compared among the groups. RESULTS: Unvalved cast models had the highest failure load and bending stiffness, whereas bivalved casts showed the lowest value for both failure load and bending stiffness. Univalved casts had a failure load measured to be between those of unvalved and bivalved cast models. Analysis of variance showed significance when failure load and bending stiffness data among all the groups were compared. A post hoc Bonferroni statistical analysis showed significance in bending stiffness between intact and bivalved models (P < 0.01), intact and univalved models (P < 0.01), but no significant difference in bending stiffness between univalved and bivalved models (P > 0.01). Differences in measured failure load values were found to be statistically significant among all cast models (P < 0.01). CONCLUSIONS: Valving significantly decreases the bending stiffness and load to failure of fiberglass casts. Univalved casts have a higher load to failure than bivalved casts. CLINICAL RELEVANCE: Valving adversely alters the structural integrity of fiberglass casts. This may impair a cast's ability to effectively immobilize an extremity or maintain a fracture reduction.

Bilateral absence of the long head of the biceps tendon.

Congenital absence of the long head of the biceps (LHB) tendon is a rare condition. The literature describes unilateral cases, associations with other congenital developmental anomalies, and associations with shoulder instability and SLAP tears. We present a case with bilateral absent LHB tendons and subacromial impingement pathology in a patient without a history of trauma or other congenital developmental abnormalities.

The effect of drilling angle on posterior interosseous nerve safety during open and endoscopic anterior single-incision repair of the distal biceps tendon.

PURPOSE: The purpose of this study was to define a safe trajectory with regard to iatrogenic posterior interosseous nerve (PIN) injury when drilling the bicipital tuberosity for EndoButton repair (Smith & Nephew Endoscopy, Andover, MA) of distal biceps tendon ruptures. METHODS: Ten cadaveric forearms were dissected. The bicipital tuberosity was exposed and the biceps tendon detached. The supinator and PIN were exposed dorsally. A K-wire was drilled perpendicular to the surface of the tuberosity. By use of digital calipers, the distance from the exit point of this wire to the PIN was measured. The length of the bone tunnel was also measured. This wire was removed, and a second was drilled from the same starting point but directed 30 degrees ulnarly. Measurements were repeated. A Wilcoxon signed rank test was used to compare the distances of the K-wire to the PIN and the tunnel lengths for both trajectories. RESULTS: With the perpendicular wire, the mean distance to the PIN was 11.1 mm. When directed 30 degrees ulnarly, the mean distance was 16.4 mm. The difference was significant (P < .001). The mean bone tunnel lengths for the 2 trajectories were 17.8 mm and 18.1 mm; this was not found to be significant (P = .508). CONCLUSIONS: When drilling the bicipital tuberosity, we advocate starting at a center-center position on the face of the tuberosity, holding the forearm in maximum supination, and aiming 30 degrees ulnarly to decrease the risk to the PIN. This trajectory does not decrease the bone tunnel length available for implants. CLINICAL RELEVANCE: This cadaveric anatomic study establishes safety from iatrogenic PIN injury during drilling of the bicipital tuberosity for the purpose of open or endoscopic EndoButton repair of distal biceps tendon ruptures.

Displaced apophyseal olecranon fracture in a healthy child.

Olecranon apophyseal fractures in children are uncommon. The bulk of these injuries are nondisplaced and therefore can be treated nonoperatively. Few published reports of children with displaced fractures of the olecranon apophysis exist, and the large majority of reports describe children with osteogenesis imperfecta. We report our experience with the case of an 11-year-old, healthy, male patient without osteogenesis imperfecta who sustained a displaced olecranon apophyseal fracture during a fall.

Validation of varus stress radiographs for anterior cruciate ligament and posterolateral corner knee injuries: A biomechanical study.

PURPOSE: The purpose of this study was to determine the effect of isolated anterior cruciate ligament (ACL) insufficiency on the radiographic varus stress test, and to provide reference data for the increase in lateral compartment opening under varus stress for a combined ACL and PLC injury. METHODS: Ten cadaveric lower extremities were fixed to a jig in 20° of knee flexion. Twelve Newton-meter (Nm) and clinician-applied varus loads were tested, first with intact knee ligaments, followed by sequential sectioning of the ACL, fibular collateral ligament (FCL), popliteus tendon and the popliteofibular ligament (PFL). Lateral compartment opening was measured after each sequential sectioning. RESULTS: Maximum increase in lateral compartment opening for an isolated ACL deficient knee was 1.06mm with mean increase of 0.52mm (p=0.021) for the clinician-applied load. Mean increase in lateral compartment opening in an ACL and FCL deficient knee compared to the intact knee was 1.48mm (p<0.005) and 1.99mm (p<0.005) for the 12-Nm and clinician-applied loads, respectively, increasing to 1.94mm (p<0.005) and 2.68mm (p<0.005) with sectioning of the ACL and all PLC structures. CONCLUSIONS: Anterior cruciate ligament deficiency contributes to lateral compartment opening on varus stress radiographs though not sufficiently to confound previously established standards for lateral ligament knee injuries. We did not demonstrate the same magnitude of lateral compartment opening with sectioning of the PLC structures as previously reported, questioning the reproducibility of varus stress radiographic testing among institutions. Clinicians are cautioned against making surgical decisions based solely on current standards for radiographic stress examinations.

Long-term evaluation of the Roux-Elmslie-Trillat procedure for patellar instability: a 26-year follow-up.

BACKGROUND: Few published articles exist reporting the long-term evaluation of the Roux-Elmslie-Trillat procedure. PURPOSE: To assess the long-term effect of the Roux-Elmslie-Trillat procedure in preventing recurrent subluxation and dislocation of the patella. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Eighteen patients who underwent the Roux-Elmslie-Trillat procedure for dislocation or subluxation of the patella were identified from a group previously evaluated at a mean follow-up of 3 years. The prevalence of recurrent subluxation or dislocation at a mean follow-up of 26 years was compared with the prevalence reported at the mean follow-up of 3 years. Although not the focus of this study, Cox functional scores were obtained from the smaller group and compared with the results at the 3-year follow-up. RESULTS: Seven percent (95% confidence interval, 0.00-0.32) of the patients had recurrent subluxation at 26 years compared with 7% (95% confidence interval, 0.03-0.13) of the study population reported at 3 years (P = 1.00). Fifty-four percent (95% confidence interval, 0.27-0.79) rated their affected knee as good or excellent at 26 years compared with 73% (95% confidence interval, 0.64-0.81) of the larger study population reported at 3 years (P = .14). CONCLUSION: The prevalence of recurrent subluxation and dislocation in patients with patellofemoral malalignment who underwent the Roux-Elmslie-Trillat procedure for dislocation or subluxation of the patella is similar at 3 and 26 years after the procedure. The long-term functional status of the affected knee in patients who underwent the Roux-Elmslie-Trillat procedure declined.

Incidence of knee sepsis after ACL reconstruction at one institution: the impact of a clinical pathway.

BACKGROUND: After experiencing an unusually high incidence of knee sepsis after anterior cruciate ligament (ACL) reconstruction, we sought to (1) describe how we resolved this problem through temporary discontinuation of the procedure, formation of a multidisciplinary ACL Task Force, systematic investigation of clinical data and institutional care practices, and development and implementation of an evidence-based ACL Clinical Pathway (the Pathway); and (2) report our findings and results. METHODS: From 1999 through 2008, thirty-seven cases of knee sepsis after ACL reconstruction were recorded at our institution. In 2008 (yearly incidence, 4.4%), ACL reconstructions were temporarily suspended and a Task Force was assembled to (1) identify infection risk factors or epidemiological links among cases, (2) inspect environment and processes for possible infection sources, and (3) update existing perioperative practices according to current evidence-based guidelines to reduce surgical site infection risk. These actions led to the development of the Pathway for patients and providers. The rates of knee sepsis before and after the Pathway was implemented were compared. RESULTS: There was no consistent risk factor or epidemiologic link among the cases of knee sepsis other than the time and place of the ACL reconstruction. Process review identified shortfalls in decontamination and sterilization of some surgical equipment. Perioperative care practices review revealed wide interprovider variation. Pathway implementation reduced the rate of knee sepsis after ACL reconstruction from 1.96% (twenty-four cases after 1226 ACL reconstructions performed from 2002 to 2008) to 0% (zero cases after 500 ACL reconstructions performed from 2008 to 2011); the difference was significant (p = 0.003). CONCLUSIONS: When a Task Force investigation suggested that knee sepsis after ACL reconstruction was a multifactorial problem, we implemented and standardized evidence-based perioperative care practices via the institution-wide Pathway, which significantly improved the quality and consistency of care for patients undergoing ACL reconstruction, as well evidenced by the elimination of knee sepsis.

Sensitivity of the saline load test with and without methylene blue dye in the diagnosis of artificial traumatic knee arthrotomies.

OBJECTIVES: To determine whether methylene blue dye significantly improves the sensitivity of the saline load test for detection of a traumatic arthrotomy of the knee. DESIGN: Randomized, prospective. SETTING: Orthopaedic department, tertiary care medical center. PATIENTS/PARTICIPANTS: Subjects scheduled for elective outpatient knee arthroscopy were prospectively enrolled and randomized to a normal saline group or a methylene blue group. A total of 58 subjects were enrolled (methylene blue 29, normal saline 29). INTERVENTION: In the course of routine elective knee arthroscopy, a standard inferior lateral arthrotomy was created and then normal saline or methylene blue solution was injected while observing for fluid outflow from the arthrotomy site. MAIN OUTCOME MEASUREMENTS: The volume of fluid injected at the time of outflow was recorded with 180 mL set as the maximum injection volume. RESULTS: The false-negative rate was 67% (methylene blue 69%, normal saline 66%). In patients with a positive test, mean volume of injected fluid at outflow was 105 mL in the methylene blue group and 95 mL in the normal saline group (P = 0.61). CONCLUSIONS: The sensitivity of the saline load test is unacceptably low. The addition of methylene blue does not improve the diagnostic value of the saline load test. Therefore, these results indicate that the saline load test, regardless of the inclusion of methylene blue, is not an accurate test for diagnosing small traumatic knee arthrotomies. LEVEL OF EVIDENCE: Diagnostic Level I. See Instructions for Authors for a complete description of levels of evidence.

Saving lives following the expansion of centralized remote telemetry monitoring.

Continuous monitoring of patients throughout the hospital is a desirable method to ensure the continuity of quality care. Hospitals looking to improve the manner in which they maintain such continuity without compromising efficiency must explore the benefits of implementing monitoring technology to its fullest potential. This case study chronicles the journey of a level-one trauma hospital during the expansion of remote wireless telemetry monitoring and the telemetry technician role. The lives saved as a result of this expansion were primarily attributable to the installation of remote wireless telemetry monitoring in the emergency department. The expansion of the telemetry technician role improved not only the quality of the monitoring signal and recognition, but also the ability to identify changes in trended data. The next step for improving care delivery includes the addition of a patient locator system within the facility, which will provide the most accurate information regarding patient location during transfer. Accurately identifying patient location in addition to alerting staff to changes in patient status will ensure that care providers respond promptly and that the highest quality of patient care is delivered while patients are away from the nursing unit.

Biomechanical comparison of locking versus nonlocking volar and dorsal T-plates for fixation of dorsally comminuted distal radius fractures.

OBJECTIVES: The purpose of this study was to gain insight into the effect of plate location and screw type for fixation of extra-articular distal radius fractures with dorsal comminution (Orthopaedic Trauma Association Type 23-A3.2). METHODS: Sixteen pairs of cadaver radii were randomized to four plating configurations: dorsal locking, dorsal nonlocking, volar locking, and volar nonlocking. A standard 1-cm dorsal wedge osteotomy was used. Cyclic axial loads were applied for 5000 cycles. Stiffness and fragment displacement were recorded at 500 cycle-intervals. Pre- and postcyclic loading radiographs were analyzed. An axial load to failure test followed and construct stiffness and failure strength recorded. Biomechanical data were analyzed using a two-way analysis of variance (P < 0.05). Failure modes were descriptively interpreted. RESULTS: Cyclic testing data revealed no difference between constructs at any interval. Within all construct groups, displacement that occurred did so within the first 500 cycles of testing. Pre- and postcyclic loading radiographic analysis showed no differences in construct deformation. Load to failure testing revealed no differences between groups, whereas volar constructs approached significance (P = 0.08) for increased failure strength. Dorsal constructs failed primarily by fragment subsidence and fragmentation, whereas volar constructs failed by plate bending. CONCLUSIONS: No difference in all measured biomechanical parameters supports equivalence between constructs and surgeon discretion in determining operative method. Minimal fragment displacement and construct deformation during physiological testing support previous data that early postoperative motion can be recommended. Fragment displacement that occurs does so in the early periods of motion.

Arthroscopic excision of a painful bipartite patella fragment.

Bipartite patella is an uncommon finding, with the majority of cases discovered incidentally on radiographs. Occasionally, bipartite patella can become painful through sports activities, overuse, or following an injury, and the large majority of these cases resolve with nonoperative treatment. However, for patients who do not respond to a prolonged course of nonoperative treatment, surgical options may be considered. We report a successful case of arthroscopic excision of a painful bipartite patella fragment in a 19-year-old male collegiate basketball player. A review of the literature is included.

Plantar flexion influences radiographic measurements of the ankle mortise.

BACKGROUND: The treatment of ankle fractures often depends on the integrity of the deltoid ligament. Diagnosis of a deltoid ligament tear depends on the measurement of the medial clear space. We sought to evaluate the impact of ankle plantar flexion on the medial clear space. METHODS: Mortise radiographs were made for twenty-five healthy volunteers, with the ankle in four positions of plantar flexion (0 degrees, 15 degrees, 30 degrees, and 45 degrees). Four observers measured the medial clear space and the superior clear space on each radiograph. The mean medial clear space at 0 degrees was defined as the control, and the deviation of the medial clear space from the control value was calculated at 15 degrees, 30 degrees, and 45 degrees of plantar flexion. The ratio of the medial clear space to the superior clear space was determined on all radiographs, and ratios that were false-positive for a deltoid ligament injury were identified. RESULTS: Fourteen male and eleven female volunteers were evaluated. The average increase in the medial clear space when ankle plantar flexion was increased from 0 degrees to 45 degrees was 0.38 mm (95% confidence interval, 0.18 to 0.58 mm). This increase was significant (p = 0.005). The average increase in the medial clear space was 0.04 mm when ankle plantar flexion was increased from 0 degrees to 15 degrees and 0.22 mm when it was increased from 0 degrees to 30 degrees. Neither of these changes was significant (p = 0.99 and 0.20). The prevalence of false-positive findings of deltoid injury based on the ratio of the medial clear space to the superior clear space increased as ankle plantar flexion increased, but this increase did not reach significance in our study group (p = 0.18). CONCLUSIONS: Plantar flexion of the ankle produces changes in radiographic measurements of the medial clear space. The potential for false-positive findings of deltoid disruption increases with increasing ankle plantar flexion.

Risser sign inter-rater and intra-rater agreement: is the Risser sign reliable?

BACKGROUND: Studies directly evaluating the reliability of the Risser sign are few in number, possess small sample sizes, and offer conflicting results. This study establishes the reliability of the Risser sign on a large sample size in an effort to provide clarification on the subject. METHODS: Two years' worth of AP pelvis radiographs from patients age 8-20 were downloaded from our institution's digital imaging system. One hundred of these images were selected for inclusion by an independent reviewer whose goal was to capture a spread of radiographs that included all Risser stages. Risser grading occurred in two rounds. In each round, three examiners randomly reviewed the 100 radiographs on three different occasions. The full AP pelvis radiograph was graded in Round 1 while only the iliac apophysis was visible in Round 2. Kappa coefficients and their confidence bounds are reported to indicate intra- and inter-observer reliability. The contrast between the rates of agreement about Risser stages in Rounds 1 versus 2 was assessed by McNemar's test. The signed-rank test was used to evaluate differences in intra-observer values between rounds. RESULTS: Round 1 inter-observer kappa was 0.76. Round 2 inter-observer kappa was 0.51. In Round 1, 63 radiographs showed perfect agreement within the same Risser stage for all observations compared to 44 radiographs with perfect agreement within the same Risser stage in Round 2 (p = 0.004). Round 1 intra-observer kappa values were 0.92, 0.86, and 0.88. Round 2 intra-observer kappa values were 0.91, 0.77, and 0.88. Intra-observer value differences between rounds were not significant for two observers (p = 0.074, 0.061) but was significant for the third observer (p = 0.002). CONCLUSION: The reliability of the Risser sign is acceptable and can be further improved when other markers of skeletal maturity on the pelvis radiograph are used to assist in grading.

Parasites of the deepwater sculpin (Myoxocephalus thompsonii) across its Canadian range.

Deepwater sculpin (Myoxocephalus thompsonii) were collected from 19 lakes across the species' distribution in Canada and examined for parasites. Six helminth species (Crepidostomum farionis, Bothriocephalus cuspidatus, Proteocephalus sp., Cyathocephalus truncatus, Raphidascaris acus, and Echinorhynchus salmonis), 1 crustacean species (Ergasilus nerkae), and 1 molluscan species (glochidia) parasitized these hosts. Crepidostomum farionis, Proteocephalus sp., R. acus, E. nerkae, and the glochidia represent new parasite records for this host species. Overall parasite prevalence was 78.0% while mean intensity was 6.1 +/- 7.1 SD. Bothriocephalus cuspidatus was the most prevalent parasite and was recorded from 62.2% of the deepwater sculpin and found in 17 of the 19 lakes. The low-productivity habitat of this host limits the parasites available for transmission, and the infra- and component communities were generally species poor. With the exception of the Proteocephalus sp., all of the helminth parasites recovered have been reported as adults in lake trout (Salvelinus namaycush) or burbot (Lota lota), suggesting that, in the lakes where they occur, deepwater sculpin may play an important role in energetic transfer and parasitic transmission to higher trophic levels.