Ion exchange selectivity in clay is controlled by nanoscale chemical-mechanical coupling.

Ion exchange in nanoporous clay-rich media plays an integral role in water, nutrient, and contaminant storage and transport. In montmorillonite (MMT), a common clay mineral in soils, sediments, and muds, the swelling and collapse of clay particles through the addition or removal of discrete molecular layers of water alters cation exchange selectivities in a poorly understood way. Here, we show that ion exchange is coupled to the dynamic delamination and restacking of clay layers, which creates a feedback between the hydration state of the exchanging cation and the composition of the clay interlayer. Particles with different hydration states are distinct phases with unique binding selectivities. Surprisingly, equilibrium achieved through thermal fluctuations in cation concentration and hydration state leads to the exchange of both ions and individual MMT layers between particles, a process we image directly with high-resolution transmission electron microscopy at cryogenic conditions (cryo-TEM). We introduce an exchange model that accounts for the binding selectivities of different phases, which is likely applicable to many charged colloidal or macromolecular systems in which the structural conformation is correlated with the activities of water and counterions within spatially confined compartments.

Selenite Uptake by Ca-Al LDH: A Description of Intercalated Anion Coordination Geometries.

Layered double hydroxides (LDHs) are anion exchangers with a strong potential to scavenge anionic contaminants in aquatic environments. Here, the uptake of selenite (SeO32-) by Ca-Al LDHs was investigated as a function of Se concentration. Thermodynamic modeling of batch sorption isotherms shows that the formation of SeO32--intercalated AFm (hydrated calcium aluminate monosubstituent) phase, AFm-SeO3, is the dominant mechanism controlling the retention of Se at medium loadings. AFm-Cl2 shows much stronger affinity and larger distribution ratio (Rd ∼ 17800 L kg-1) toward SeO32- than AFm-SO4 (Rd ∼ 705 L kg-1). At stoichiometric SeO32- loading for anion exchange, the newly formed AFm-SeO3 phase results in two basal spacing, i.e., 9.93 ± 0.06 Å and ∼11.03 ± 0.03 Å. Extended X-ray absorption fine structure (EXAFS) spectra indicate that the intercalated SeO32- forms inner-sphere complexes with the Ca-Al-O layers. In situ X-ray diffraction (XRD) shows that basal spacing of Ca-Al LDHs have a remarkable linear relationship with the size of hydrated intercalated anions (i.e., Cl-, SO42-, MoO42-, and SeO32-). Contrary to AFm-SeO3 with inner-sphere SeO32- complexes in the interlayer, the phase with hydrogen-bonded inner-sphere complexed SeO32- is kinetically favored but thermodynamically unstable. This work offers new insights about the determination of intercalated anion coordination geometries via XRD analyses.

Arsenate and Selenate Scavenging by Basaluminite: Insights into the Reactivity of Aluminum Phases in Acid Mine Drainage.

Basaluminite precipitation may play an important role in the behavior of trace elements in water and sediments affected by acid mine drainage and acid sulfate soils. In this study, the affinity of basaluminite and schwertmannite for arsenate and selenate is compared, and the coordination geometries of these oxyanions in both structures are reported. Batch isotherm experiments were conducted to examine the sorption capacity of synthetic schwertmannite and basaluminite and the potential competitive effect of sulfate. In addition, synchrotron-based techniques such as differential pair distribution function (d-PDF) analysis and extended X-ray absorption fine structure (EXAFS) were used to determine the local structure of As(V) and Se(VI) complexes. The results show that oxyanion exchange with structural sulfate was the main mechanism for removal of selenate, whereas arsenate was removed by a combination of surface complexes and oxyanion exchange. The arsenate adsorption capacity of basaluminite was 2 times higher than that of schwertmannite and 3 times higher than that of selenate in both phases. The sulfate:arsenate and sulfate:selenate exchange ratios were 1:2 and 1:1, respectively. High sulfate concentrations in the solutions did not show a competitive effect on arsenate sorption capacity but had a strong impact on selenate uptake, suggesting some kind of specific interaction for arsenate. Both d-PDF and EXAFS results indicated that the bidentate binuclear inner sphere was the most probable type of ligand for arsenate on both phases and for selenate on schwertmannite, whereas selenate forms outer-sphere complexes in the aluminum octahedral interlayer of basaluminite. Overall, these results show a strong affinity of poorly crystalline aluminum phases such as basaluminite for As(V) and Se(VI) oxyanions, with adsorption capacities on the same order of magnitude as those of iron oxides. The results obtained in this study are relevant to the understanding of trace element behavior in environments affected by acid water, potentially opening new research lines focused on remediation by natural attenuation processes or engineered water treatment systems.

Recovery of Rare Earth Elements and Yttrium from Passive-Remediation Systems of Acid Mine Drainage.

Rare earth elements and yttrium (REY) are raw materials of increasing importance for modern technologies, and finding new sources has become a pressing need. Acid mine drainage (AMD) is commonly considered an environmental pollution issue. However, REY concentrations in AMD can be several orders of magnitude higher than in naturally occurring water bodies. With respect to shale standards, the REY distribution pattern in AMD is enriched in intermediate and valuable REY, such as Tb and Dy. The objective of the present work is to study the behavior of REY in AMD passive-remediation systems. Traditional AMD passive remediation systems are based on the reaction of AMD with calcite-based permeable substrates followed by decantation ponds. Experiments with two columns simulating AMD treatment demonstrate that schwertmannite does not accumulate REY, which, instead, are retained in the basaluminite residue. The same observation is made in two field-scale treatments from the Iberian Pyrite Belt (IPB, southwest Spain). On the basis of the amplitude of this process and on the extent of the IPB, our findings suggest that the proposed AMD remediation process can represent a modest but suitable REY source. In this sense, the IPB could function as a giant heap-leaching process of regional scale in which rain and oxygen act as natural driving forces with no energy investment. In addition to having environmental benefits of its treatment, AMD is expected to last for hundreds of years, and therefore, the total reserves are practically unlimited.

Effects of estuarine water mixing on the mobility of trace elements in acid mine drainage leachates.

This research reports the effects of pH increase on contaminant mobility in acid mine drainage from the Iberian Pyrite Belt by seawater mixing in the laboratory, simulating the processes occurring in the Estuary of Huelva (SW Iberian Peninsula). Concentrations of Al, Fe, As, Cu and REY in mixing solutions significantly decreased with increasing pH. Schwertmannite precipitation at pH 2.5-4.0 led to the total removal of Fe(III) and As. Subsequently, iron-depleted solutions began to be controlled by precipitation of basaluminite at pH 4.5-6.0, which acted as a sink for Al, Cu and REY. Nevertheless, as the pH rises, schwertmannite becomes unstable and releases back to solution the previously retained As. Moreover, other elements (S, Zn, Cd, Ni and Co) behaved conservatively in mixing solutions with no participation in precipitation processes. Some toxic elements finally end up to the Atlantic Ocean contributing to the total pollutant loads and environmentally threatening the coastal areas.

River thorium concentrations can record bedrock fracture processes including some triggered by distant seismic events.

Fractures are integral to the hydrology and geochemistry of watersheds, but our understanding of fracture dynamics is very limited because of the challenge of monitoring the subsurface. Here we provide evidence that long-term, high-frequency measurements of the river concentration of the ultra-trace element thorium (Th) can provide a signature of bedrock fracture processes spanning neighboring watersheds in Colorado. River Th concentrations show abrupt (subdaily) excursions and biexponential decay with approximately 1-day and 1-week time constants, concentration patterns that are distinct from all other solutes except beryllium and arsenic. The patterns are uncorrelated with daily precipitation records or seasonal trends in atmospheric deposition. Groundwater Th analyses are consistent with bedrock release and dilution upon mixing with river water. Most Th excursions have no seismic signatures that are detectable 50 km from the site, suggesting the Th concentrations can reveal aseismic fracture or fault events. We find, however, a weak statistical correlation between Th and seismic motion caused by distant earthquakes, possibly the first chemical signature of dynamic earthquake triggering, a phenomenon previously identified only through geophysical methods.

Effects of aluminum incorporation on the schwertmannite structure and surface properties.

Schwertmannite is a common nanomineral in acid sulfate environments such as Acid Mine Drainage (AMD) and Acid Sulfate Soils (ASS). Its high surface area and positively charged surface result in a strong affinity towards toxic oxyanions such as arsenate in solution. However, natural precipitation of schwertmannite also involves the accumulation of other impurities, in particular aluminum, an element that is often incorporated into the structure of Fe-oxide minerals, such as goethite and ferrihydrite, affecting their structural and surface properties. However, little is known about the effect of Al incorporation in schwertmannite on the removal capacity of toxic oxyanions found in AMD and ASS (e.g. arsenate). In this paper, schwertmannite samples with variable Al concentration were synthetized and employed in arsenate adsorption isotherm experiments at a constant pH of 3.5. Solid samples before and after arsenate adsorption were characterized using high energy X-ray diffraction and pair distribution function analyses in order to identify structural differences correlated with the Al content as well as variations in the coordination of arsenate adsorbed on the mineral surface. These analyses showed limited Al accumulation on schwertmannite (up to 5%) with a low effect on its structure. The maximum arsenate sorption capacity (258 mmolH2AsO4 molFe-1) was in the range of that with pure schwertmannite, but a higher proportion of inner-sphere coordination was observed. Finally, Al was found to desorb from schwertmannite, with adsorbed arsenate preventing this effect and increasing the stability of the mineral. These results are useful to interpret observations from the field, in particular from river water affected by AMD and ASS, where similar conditions are observed, and where aluminum incorporation is expected.

Sulfate reduction processes in salt marshes affected by phosphogypsum: Geochemical influences on contaminant mobility.

Sulfate reduction and its associated contaminant immobilization in marsh soils supporting a phosphogypsum stack was examined by pore-water and solid analysis, selective extractions, microscopy and sulfur K-edge X-ray absorption near-edge structure (XANES) spectroscopy. The negative impact of this stack on estuarine environments is a concerning problem. In the weathering profile, total concentrations of most pollutants increase with depth; instead, dissolved contents in pore-waters increase to middle of the saturated zone but then decrease drastically down to reach the marsh due to sulfide precipitation. Excess of acid-volatile sulfide plus pyritic sulfur over metals bound to the oxidizable fraction indicates that sulfide precipitation is the main mechanism responsible for metal removal in the marsh. Thus, abundant pyrite occurred as framboidal grains, in addition to other minor sulfides of As, Zn and Cu as isolated particles. Moreover, high contents of elemental sulfur were found, which suggest partial sulfide oxidation, but marsh may have capacity to buffer potential release of contaminants. The importance of sulfur species was quantitatively confirmed by XANES, which also supports the accuracy of selective extraction schemes. Accordingly, managing pore-water quality through organic carbon-rich amendments over phosphogypsum stacks could lead to a decrease in contaminant loading of leakages resulting from weathering.

An anomalous metal-rich phosphogypsum: Characterization and classification according to international regulations.

Phosphogypsum is the main waste generated by the phosphate fertilizer industry. Despite the high level of pollutants found in phosphogypsum and the proximity of stacks to cities, there are no specific regulations for the management of this waste. This study addresses this issue by applying to phosphogypsum, from a fertilizer plant in Huelva (SW Spain), the leaching tests proposed by the current European and US environmental regulations for wastes management and classification. Two main conclusions were obtained: 1) the anomalous metal and metalloid concentrations (e.g. As, Fe, Pb, Sb, Mn, V and Cu) and higher mobility observed in the Huelva phosphogypsum compared to other stacks worldwide, and 2) the discrepancies observed between EU and US regulations dealing with hazardousness classification of these materials. This latter finding suggests the need to use complementary assessment protocols to obtain a better characterization and classification of these wastes. An evaluation of the potential risk to the aquatic life according to the US EPA regulation is proposed in this study. The results warn about the acute and chronic effects on the aquatic life of this waste and suggest the adoption of more strict measures for a safe disposal of phosphogypsum stacks.