The 50 most-cited articles on clear aligner treatment: A bibliometric and visualized analysis.

INTRODUCTION: Research on clear aligner treatment (CAT) has increased in recent years. In this study, we aimed to perform a bibliometric and visualized analysis to identify and critically assess the 50 most highly cited articles on CAT. METHODS: Web of Science was selected as a data source and consulted until March 2020 to identify all articles potentially relevant to the analysis. All the eligible articles were collected until 50 manuscripts were listed. Article-based parameters, journal-based parameters, and author-based parameters were registered to perform the bibliometric analysis. Keywords were automatically harvested from the selected articles to implement the visualized analysis. RESULTS: The search identified a total of 378 articles; the total number of citations of the selected articles varied from 15 to 112. The average number of citations per year varied from 1.15 to 13.83. The predominant study design was clinical (31.7%). Over the 15 journals in which the most cited articles were published, the American Journal of Orthodontics and Dentofacial Orthopedics published the majority of those included in the list (14) and also received the greatest number of citations (671). A total of 195 authors contributed to the 50 most cited articles; a significant portion of them (26) were unaffiliated with academic institutions. A total of 184 keywords were gathered from the article list. CONCLUSIONS: The number of citations on CAT is expected to grow steadily in parallel with the rising number of research projects. The present work identifies the most influential articles on CAT and their characteristics, placing emphasis on the journals, the authors, and the topics addressed.

Evaluation of masticatory muscle response to clear aligner therapy using ambulatory electromyographic recording.

INTRODUCTION: Patients undergoing clear aligner therapy (CAT) report muscle tenderness and produce wear facets on their aligner trays. However, little is known about the masticatory muscle response to clear aligners. Here, we measured the activity of the masseter during CAT using ambulatory electromyography. We also explored whether psychological traits modulate the masticatory muscle response to CAT. METHODS: Using portable data loggers, we recorded the electromyographic (EMG) activity in the right masseter muscle of 17 healthy adults without temporomandibular disorder (16 females, 1 male; mean age ± standard deviation, 35.3 ± 17.6 years) commencing treatment with CAT over 4 weeks, under the following conditions: week 1 without aligners (baseline), week 2 with a passive aligner (dummy), week 3 with their first active aligner (active1), and week 4 with their second active aligner (active2). We used a mixed-effect model to test differences in EMG activity over the 4-weeks and a general linear model to test the effect of psychological traits on EMG activity. RESULTS: The EMG activity of the masseter increased significantly with aligners compared with baseline. The largest relative increase in EMG activity was seen during the dummy (152%; P <0.001) and active1 (155%; P <0.001) stages. During active2, the activity of the masseter decreased significantly toward baseline levels. Participants' trait anxiety was positively associated with increases in EMG activity (P = 0.027). CONCLUSIONS: CAT is associated with a transient increase in masticatory muscle activity, possibly because of an increase in wake-time parafunctional tooth clenching. Temporomandibular disorder-free patients adapt well to CAT as the masticatory muscle activity decreases toward baseline levels after 2 weeks.

Impact of clear aligner therapy on tooth pain and masticatory muscle soreness.

BACKGROUND: Clinical findings suggest that orthodontic treatment with clear aligners (clear aligner therapy/CAT) may cause masticatory muscle soreness in some patients. OBJECTIVE: This multi-site prospective study investigated tooth pain and masticatory muscle soreness and tenderness in patients undergoing CAT and explored whether psychological traits affected these outcomes. METHODS: Twenty-seven adults (22F, 5M; mean age ± SD=35.3 ± 17.6 years) about to start CAT were recruited at three clinics. During CAT, they reported on 100-mm visual analogue scales their tooth pain, masticatory muscle soreness and stress three times per day over 4 weeks (week 1 = baseline; week 2 = dummy aligner; week 3 = first active aligner; week 4 = second active aligner). Pressure pain thresholds (PPTs) were measured at the masseter and temporalis at baseline and after week 4. Mixed models were used to evaluate the outcome measures over time. RESULTS: Clear aligner therapy caused mild tooth pain, which was greater with the passive than the first and second active aligners (both P < .001). Mild and clinically not relevant masticatory muscle soreness was produced by all aligners (all P < .05), with the first active aligner producing less soreness than the dummy aligner (P < .001). PPTs did not change significantly after 4 weeks. Both tooth pain and masticatory muscle soreness were affected by stress and trait anxiety, whilst muscle soreness was affected also by oral behaviours. CONCLUSIONS: In the short term, CAT produces tooth pain and masticatory muscle soreness of limited significance. Frequent oral behaviours are related to increased masticatory muscle soreness during CAT. The medium- and long-term effects of CAT should be further explored.

The use of conventional transcutaneous electrical nerve stimulation in chronic facial myalgia patients.

OBJECTIVES: The aim of this study was to evaluate the efficacy of conventional TENS in women affected by chronic facial myalgia. MATERIALS AND METHODS: The study was performed on 49 women affected by chronic facial myalgia randomly allocated in the TENS group (34 women) and the control group (15 women). The subjective level of pain was assessed by the Visual Analogue Scale indicating the mean (VAS MEAN), the maximum (VAS MAX) and the current intensity of pain (VAS NOW). The level of pain at the muscular palpation sites was assessed by the Pericranial Muscle Tenderness Score (PTS) and the Cervical Muscle Tenderness Score (CTS). The TENS therapy lasted for 10 weeks, and data were collected at baseline, after 5, 10, 15 and 25 weeks. The differences between groups before and after treatment were compared with the Mann-Whitney and the Kolmogorov-Smirnov tests. The intra-group differences were compared with the one-way ANOVA test. RESULTS: The results showed that the VAS MEAN, VAS MAX, PTS and CTS were significantly reduced in the TENS group compared to the control group after 10 weeks of TENS (p < 0.05). The intra-group analysis revealed a decreasing tendency of VAS MEAN, VAS MAX, VAS NOW, PTS and CTS in the TENS group in a 25-week period (p < 0.05). CONCLUSIONS: The study demonstrated the efficacy of conventional TENS in patients with chronic facial myalgia and the decrease in both subjective and objective pain. CLINICAL RELEVANCE: Conventional TENS is a safe, non-invasive, easy-to-administer therapy for chronic facial myalgia.

Frequency of daytime tooth clenching episodes in individuals affected by masticatory muscle pain and pain-free controls during standardized ability tasks.

OBJECTIVES: Tooth clenching has been suggested to be related to temporomandibular pain. However, the electromyographic characteristics of daytime clenching episodes have been minimally investigated. This study aimed to analyze the frequency, amplitude, and duration of daytime clenching episodes in patients with masticatory muscle pain and pain-free individuals. METHODS: Fifteen women with masticatory muscles myalgia (MP group, mean ± SD age = 26.4 ± 7.6 years) matched for age to 18 pain-free women (CTR group, mean ± SD age = 25.3 ± 2.8 years) were submitted to three different ability tasks (filling out questionnaires for 40 min, reading for 20 min, and playing a videogame for 20 min). The electromyographic activity periods (AP) of the right masseter greater than 10 % (AP10), 20 % (AP20), and 30 % (AP30) of the maximum voluntary contraction were analyzed. RESULTS: The mean frequencies of AP10, AP20, and AP30 were greater in MP than in CTR individuals (all p < 0.05). The mean duration of AP10 was higher in MP group than CTR group only while filling out the questionnaires (p = 0.0033). CTR group had an increased frequency and duration of AP10 while playing the videogame than while reading a magazine. The ability tasks did not affect the muscle activity in the MP group. CONCLUSIONS: Individuals with masticatory muscle pain have an increased frequency of both high and low-intense daytime clenching episodes. The type of ability task affects the frequency and the duration of clenching episodes only in pain-free individuals. CLINICAL RELEVANCE: Clinicians should recognize that the frequency and intensity of daytime clenching are noticeably increased in individuals with masticatory muscle pain in order to better tailor treatment.

Sleep bruxism in adolescents: a systematic literature review of related risk factors.

BACKGROUND: Multiple risk factors have been associated to sleep bruxism (SB). Nevertheless, there are still many unsolved issues concerning the etiology of SB that have consequences on the clinical management strategies. OBJECTIVE: Systematically review the literature to assess the relationship between risk factors and SB symptoms in adolescents (age 11-19 years). SEARCH METHODS AND SELECTION CRITERIA: PubMed, Embase, Scopus, Cochrane Oral Health Group's Trial Register and Cochrane Register of Controlled Trials, Web of Science, LILACs, and SciELO were searched to identify all peer-reviewed articles potentially relevant to the review. DATA COLLECTION AND ANALYSIS: The risk of bias was assessed according to the guidelines from the Cochrane handbook for systematic reviews of interventions, with reporting in agreement to the preferred reporting items for systematic reviews and meta-analyses guidelines. RESULTS: Four out of the 4546 initially identified articles were selected. According to the grading of recommendations assessment, development and evaluation assessment (GRADE), the magnitude of agreement was almost perfect for all checklist items. Sleep disturbances, and snoring in particular, headache, jaw muscle fatigue, and tooth wear seem to be associated to SB in adolescents from 11 to 19 years old. LIMITATIONS: Despite the large interest of the scientific community in the field of oral parafunctions, only four articles met the eligibility criteria. Furthermore only associations and not definite cause-effect relationships were highlighted in the selected articles. CONCLUSIONS: Sleep disturbances presented the strongest association with SB while very few occlusal features had a moderate association. As a common sense the investigation of sleep respiratory disorders could be of great help in the management of SB in adolescents.

Diagnostic accuracy and measurement sensitivity of digital models for orthodontic purposes: A systematic review.

INTRODUCTION: Our objective was to assess the accuracy, validity, and reliability of measurements obtained from virtual dental study models compared with those obtained from plaster models. METHODS: PubMed, PubMed Central, National Library of Medicine Medline, Embase, Cochrane Central Register of Controlled Clinical trials, Web of Knowledge, Scopus, Google Scholar, and LILACs were searched from January 2000 to November 2014. A grading system described by the Swedish Council on Technology Assessment in Health Care and the Cochrane tool for risk of bias assessment were used to rate the methodologic quality of the articles. RESULTS: Thirty-five relevant articles were selected. The methodologic quality was high. No significant differences were observed for most of the studies in all the measured parameters, with the exception of the American Board of Orthodontics Objective Grading System. CONCLUSIONS: Digital models are as reliable as traditional plaster models, with high accuracy, reliability, and reproducibility. Landmark identification, rather than the measuring device or the software, appears to be the greatest limitation. Furthermore, with their advantages in terms of cost, time, and space required, digital models could be considered the new gold standard in current practice.

Laypeople's perceptions of frontal smile esthetics: A systematic review.

INTRODUCTION: The emphasis on dental esthetics has increased in recent years. There are, however, differences in esthetic perceptions among professional and lay groups. The aim of this comprehensive review was to update previous reviews and answer the following research question: Can lay thresholds for acceptance of smile esthetic anomalies be defined? METHODS: A systematic search in the medical literature (PubMed, PMC, NLM, Embase, Cochrane Central Register of Controlled Clinical trials, Web of Knowledge, Scopus, Google Scholar, and LILACs) was performed to identify all peer-reviewed articles reporting data regarding evaluations of laypeople's perceptions of dental esthetic factors. RESULTS: Of the 6032 analyzed articles, 66 studies were selected for the final review process. Among the selected articles investigated perceptions of diastema, 15 analyzed modifications in tooth size and shape, 8 considered incisor positions, 15 evaluated midline discrepancies, 16 investigated buccal corridors, 26 analyzed gingival display and design, 3 considered lip height, and 20 investigated miscellaneous factors. Threshold values were identified for the following features: diastema (0-2 mm), tooth size and shape of incisor position, midline discrepancy (0-3 mm), buccal corridors (5-16 mm), gingival exposure (1.5-4 mm), occlusal canting (0°-4°), and overbite (2-5 mm). Furthermore, few other smile characteristics were found to be significantly associated with perception of smile aesthetics, even though any threshold could be detected. CONCLUSIONS: On the basis of the obtained results, threshold values for the main features of smile and dental esthetics could be identified. Limitations of the present study were the heterogeneity of data which made it impossible to perform a meta-analysis, and the lack of information about sample selection and selective outcome reporting.

Periodontal health during clear aligners treatment: a systematic review.

BACKGROUND: Clear aligner treatment (CAT) has been cited as a safe and comfortable orthodontic procedure for adult patients. However, the available evidence is scarce. OBJECTIVE: To perform a systematic review of the existing literature in order to assess periodontal health during CAT. SEARCH METHODS AND SELECTION CRITERIA: Pubmed, Pubmed Central, National Library of Medicine's Medline, Embase, Cochrane Central Register of Controlled Clinical trials, Web of Knowledge, Scopus, Google Scholar, and LILACS were searched from January 1945 to September 2014 to identify all peer-reviewed papers potentially relevant to the review. DATA COLLECTION AND ANALYSIS: After duplicate selection and extraction procedures, the risk of bias was assessed according to the Centre for Reviews and Dissemination criteria, and a 3-point grading system, as described by the Swedish Council on Technology Assessment in Health Care (SBU), was used to rate the methodological quality of the selected papers. A PICOS table was used for data extraction. RESULTS: Five relevant articles were selected from the 1247 identified articles. The level of evidence was moderate for all the studies. A significant improvement of the periodontal health indexes was revealed, in particular when CAT was compared to fixed appliances. No periodontal CAT adverse effects were observed in the selected studies. CONCLUSIONS: Periodontal health indexes were significantly improved during CAT. The results of this review should be interpreted with some caution because of the number, quality, and heterogeneity of the included studies.

Reliability of a portable device for the detection of sleep bruxism.

OBJECTIVES: The aim of the study was to assess the repeatability in detecting sleep bruxism (SB) episodes by combined surface electromyography and heart rate (HR) signals recorded by a compact portable device (Bruxoff®). SB episodes are preceded by a sudden HR change. Thus, HR detection increases the precision of automatic detection of SB. MATERIALS AND METHODS: Ten healthy subjects (five women and five men; 30.2 ± 11.02 years) were selected for the study. Rhythmic masseter muscle activities, constituting the basic pattern of SB, were detected during three nights of recording during three different weeks with the Bruxoff device. RESULTS: The two-way ANOVA was not significant for SB episodes per night, SB episodes per hour, and heart frequency: no significant differences were observed during the three different nights of recording for each of the abovementioned variables (P > 0.05). The intraclass correlation coefficient showed a good reproducibility for SB episodes per night (69 %), SB per hour (74 %), and heart frequency (82 %). A poor reproducibility was revealed for the number of masseter contractions (53 %). The Pearson analysis showed the absence of a significant correlation between the number of masseter contractions per night and the number of SB episodes per night (r = -0.02, P = 0.91). CONCLUSIONS: The Bruxoff device showed a good reproducibility of measurements of sleep bruxism episodes over time. CLINICAL RELEVANCE: These findings are important in the light of the need for simple and reliable portable devices for the diagnosis of SB both in the clinical and research settings.

Aligner biomechanics: Where we are now and where we are heading for.

Aligner orthodontics has gained significant popularity as an alternative to traditional braces because of its aesthetic appeal and comfort. The biomechanical principles that underlie aligner orthodontics play a crucial role in achieving successful outcomes. The biomechanics of aligner orthodontics revolve around controlled force application, tooth movement, and tissue response. Efficient biomechanics in aligner orthodontics involves consideration of attachment design and optimized force systems. Attachments are tooth-colored shapes bonded to teeth, aiding in torque, rotation, and extrusion movements. Optimized force systems ensure that forces are directed along the desired movement path, reducing unnecessary strain on surrounding tissues. Understanding and manipulating the biomechanics of aligner orthodontics is essential for orthodontists to achieve optimal treatment outcomes. This approach requires careful treatment planning, considering the mechanics required for each patient's specific malocclusion. As aligner orthodontics continues to evolve, advances in material science and treatment planning software contribute to refining biomechanical strategies, enhancing treatment efficiency, and expanding the scope of cases that can be successfully treated with aligners.

Comparison of Mechanical Behavior of Clear Aligner and Rapid Palatal Expander on Transverse Plane: An In Vitro Study.

(1) Background: This study aims to investigate, within a controlled laboratory environment, the magnitude of the transversal load and the force decay over time produced by clear aligners in comparison to a Rapid Palatal Expander (RPE). (2) Methods: Resin models of a dental maxillary arch, additively manufactured from an intraoral scan, were inserted in a testing machine with uniaxial load cells to measure the force trend over time expressed by RPE and clear aligners. The mechanical load was recorded during a certain timeframe for both appliances. (3) Results: The force expressed by the RPE ranged from 30 to 50 N for each activation, decreasing with a nonlinear pattern over time. The force expressed by the clear aligner ranged from 3 to 5 N, decreasing with a linear pattern over time. In contrast, the force generated by the clear aligner fell within the range of 3 to 5 N, showing a linear reduction in force magnitude over the observed period of time. (4) Conclusions: The RPE exerted a force magnitude approximately ten times greater than that generated by clear aligners. Nevertheless, it is essential to acknowledge that the oral environment can significantly influence these results. These limitations underscore the need for caution when applying these findings to clinical settings.

Accuracy of orthodontic movements with 3D printed aligners: A prospective observational pilot study.

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new directprinting resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with directprinted aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

Short-Term Effects of 3D-Printed Occlusal Splints and Conventional Splints on Sleep Bruxism Activity: EMG-ECG Night Recordings of a Sample of Young Adults.

(1) Background: This study aims to compare the effects of 3D-printed splints and conventional manufactured splints on sleep bruxism (SB) EMG activity. (2) Methods: Twenty-six patients (19 M, 7 F, 25.8 ± 2.6 years) were randomly allocated to a study group (3D splints) and a control group (conventional manufactured splints) and followed for a period of three months with night EMG-ECG recordings. Samples of the involved materials were analyzed for nanoindentation. The outcomes of interest considered were the overall SB index, the total amount of surface masseter muscle activity (sMMA), and general and SB-related phasic and tonic contractions. A statistical evaluation was performed with a confidence interval (CI) between 2.5% and 97.5%. (3) Results: Differences between groups with OAs were observed for general tonic contraction (p = 0.0009), while differences between recording times were observed for general phasic contractions (p = 0.002) and general tonic contractions (p = 0.00001). Differences between recording times were observed for the total amount of sMMA (p = 0.01), for general phasic contractions (p = 0.0001), and for general tonic contractions (p = 0.000009) during night recordings without OAs. (4) Conclusions: Three-dimensional splints seem to have a higher impact on SB-related electromyographic activity but not on the overall sleep bruxism index. The more regular surfaces offered by 3D splints could be related to phasic contraction stabilization.

Impacted Permanent Mandibular Canines: Epidemiological Evaluation.

BACKGROUND: The aim of this study was to evaluate the epidemiology of impacted and transmigrated mandibular canines in a large orthodontic population referred to the University of Turin. METHODS: Panoramic radiographs, intraoral photographs, and dental casts of 2119 patients referred to the Department of Orthodontics at the University of Turin, Italy, between 1995 and 2022 were reviewed. These patients were divided into two groups. Group A included 1479 patients found in the Dental School archive before 2017, more specifically between 1995 and 2017. These patients were examined in order to calculate the prevalence of impacted and transmigrated mandibular canines. From 2017 to 2022, the records of 640 new patients were examined (GROUP B) in order to calculate the incidence of these occurrences. RESULTS: The prevalence of mandibular canine impaction in Group A was found to be 1.7%, with a total of 25 patients having mandibular canine impaction. A prevalence of 0.3% was found for mandibular canine transmigration (Group A). The incidence of mandibular canine impaction was found to be 2%, with a total of 13 patients with mandibular canine impaction (Group B). Mandibular canine transmigration was found in 1 of 640 participants (Group B). CONCLUSIONS: Twenty-five of 1479 patients had impacted mandibular canines, resulting in a prevalence value of 1.7%. The incidence was found to be 2%, with 13 of 640 patients having impacted mandibular canines. These results show higher prevalence and incidence rates of mandibular canine impaction when compared with previously published data.

Predictability of orthodontic tooth movement with aligners: effect of treatment design.

BACKGROUNDS: The present study was designed to define: (1) which are the less predictable OTM with Invisalign aligners when the treatment plan is designed by expert operators, (2) if the presence and shape of attachments influence the predictability of OTM and (3) if patients' demographics influence OTM predictability. The sample comprises 79 prospectively recruited patients (mean age 30.8 years; SD 12.0; 23 M, 56 F), treated by expert operators with an average of 27 aligners (SD 15) in the maxillary arch and 25 aligners (SD 11) in the mandibular arch. Post-treatment digital models and final virtual treatment plan models were exported from ClinCheck® software as STL files and subsequently imported into Geomagic Qualify ®software, to compare final teeth positions. The differences were calculated and tested for statistical significance for each tooth in the mesial-distal, vestibular-lingual and occlusal-gingival directions, as well as for angulation, inclination and rotation. In addition, the statistical significance of categorical variables was tested. RESULTS: The lack of correction was significant for all movements and in all group of teeth (P < 0.01) except for the rotation of maxillary first molar. The prescribed OTM, the group of teeth and movement, the frequency of aligner change and the use of attachment influence the outcome. The greatest discrepancies in predicted and achieved tooth position were found for angular movements and rotation of teeth characterized by round-shaped crowns, for a ratio of approximately 0.4° per 1° prescribed. Optimized attachments for upper canines and lower premolar rotation seem not working properly. Second molar movements are mostly unexpressed. Furthermore, changing the aligner every 14 days will reduce the lack of correction of the 12% with respect to 7 days aligner change. CONCLUSIONS: Predictability of orthodontic movement with aligners still has limitations related to the biomechanics of the system: the shape of some attachments and the characteristics of aligner material need to be redefined. However, the results of this study allow to properly design the virtual treatment plan, revealing how much overcorrection is needed and which attachments are most effective.

Factors Affecting Patient Compliance during Orthodontic Treatment with Aligners: Motivational Protocol and Psychological Well-Being.

Objective: Compliance is critical for successful outcomes in orthodontics, and personality traits may play a role in determining patient adherence. This study aimed to monitor compliance during treatment with removable clear aligners (CA) [Align Technology Inc, San José, Calif ], and evaluate the influence of motivational techniques and the patient's profiles assessed through the psychological well-being (PWB) questionnaire on clinical outcomes. Methods: Thirty-nine consecutive patients in permanent dentition seeking treatment with CA were recruited from two universities. Casts were obtained before treatment and after 3, 6, and 12 months and the corresponding digital Clincheck©.STL files were used to calculate the discrepancy index to check for differences between virtual and real treatment stages. Patients were divided into two groups: the Case group, which received motivational techniques at each appointment, and the control group which received instructions only at the beginning. Psychological profiles were evaluated before treatment (T0) and after 3 (T1), 6 (T2), and 12 (T3) months. Results: There were no differences between the Case and Control groups regarding the use of motivational reminders. The analysis of the PWB showed that almost all values increased, and there was a strong correlation between dental casts and correspondent. STL files at every time point. The PWB showed increased values from T0 to T3 in the sample. Conclusion: Motivational techniques did not affect patient compliance, and treatment outcomes were achieved as planned. The PWB of all patients improved throughout the treatment with CA.

Correction of severe tooth rotations using clear aligners: a case report.

BACKGROUND: The present adult patient case report shows the correction of a crossbite malocclusion and severe tooth rotations treated with the Invisalign system. METHODS: A 27-year-old female with a dental crossbite (24, 34), severe rotations of two lower incisors (more than 40 degrees) and malalignment of the upper and lower arches is described. The Invisalign system was treatment planned to correct the malocclusion. RESULTS: The treatment goals of crossbite, rotation and malalignment correction were achieved after 12 months of active aligner therapy. The overbite improved (2.5 mm before treatment, 1 mm at the end); the dental crossbite, the crowding and the severe tooth rotations (with a mean of 2 degrees of improvement per aligner) were corrected. CONCLUSIONS: After treatment, the dental alignment was considered excellent. The presented case indicates that the Invisalign system can be a useful appliance to correct a dental malocclusion involving severe rotations.

Effects on Sleep Bruxism Activity of Three Different Oral Appliances: One Year Longitudinal Cohort Study.

BACKGROUND: Different oral appliances (OAs) have been proposed to control sleep bruxism (SB) detrimental effects on the stomatognathic system. OBJECTIVE: The aim of the study was evaluate the effect of different OAs on SB activity and masticatory muscle activity (sMMA) measured by EMG. METHOD: This longitudinal cohort study was conducted on 51 patients (21 M, 30 F, mean age 26,5 ± 3,5) suffering from SB diagnosed with a validated portable EMG-ECG holter and wearing different OAs: occlusal splints, functional appliance with metallic bites and clear aligners followed after 1 week, 1 month, 3 months, 6 months and 12 months from delivery. A control group of 16 non-treated SB patients (6 M, 10 F mean age 27,1 ± 1,4) was used as reference. A multiple regression analysis was performed to estimate the differences between groups. Significance was set as P value <0,05. RESULTS: Occlusal splint reduced sleep bruxism index after 1 week, 3, 6 and 12 months from delivery while functional appliance only after 12 months. Occlusal splints reduced general phasic contractions only in the first week and sleep bruxism-related phasic contractions at 1 week, 3 and 6 months after delivery with no significant reductions after 12 months. Patients wearing clear aligners showed reduction in general tonic contractions after 6 and 12 months. CONCLUSION: Resin and metal bites can reduce sleep bruxism index, while resin bites can reduce sleep bruxism-related phasic contractions. Clear aligners do not influence sleep bruxism index but can reduce tonic contractions.