Meta-Substituted Asymmetric Azobenzenes: Insights into Structure-Property Relationship.

This article presents a comprehensive investigation into the functionalization of methoxyphenylazobenzene using electron-directing groups located at the meta position relative to the azo group. Spectroscopic analysis of meta-functionalized azobenzenes reveals that the incorporation of electron-withdrawing units significantly influences the absorption spectra of both E and Z isomers, while electron-donating functionalities lead to more subtle changes. The thermal relaxation process from Z to E result in almost twice as prolonged for electron-withdrawing functionalized azobenzenes compared to their electron-rich counterparts. Computational analysis contributes a theoretical understanding of the electronic structure and properties of meta-substituted azobenzenes. This combined approach, integrating experimental and computational techniques, yields significant insights into the structure-property relationship of meta-substituted asymmetrical phenolazobenzenes.

VO2 as a natural optical metamaterial.

VO2 is a unique phase change material with strongly anisotropic electronic properties. Recently, samples have been prepared that present a co-existence of phases and thus form metal-insulator junctions of the same chemical compound. Using first principles calculations, the optical properties of metallic and semiconducting VO2 are here discussed to design self-contained natural optical metamaterials, avoiding coupling with other dielectric media. The analysis of the optical properties complements the experiments in the description of the vast change in reflectance and metallicity for both disordered and planar compounds. The present results also predict the possibility to realize ordered VO2 junctions operating as efficient hyperbolic metamaterials in the THz-visible range, by simply adjusting the ratio between metallic and insulating VO2 content. The possibility to excite propagating volume plasmom polariton across the metamaterial is finally discussed.

Conflicting effect of chemical doping on the thermoelectric response of ordered PEDOT aggregates.

Poly(3,4-ethylenedioxythiophene) (PEDOT) semiconductor plays a relevant role in the development of organic thermoelectric (TE) devices for low-power generation. While dopant counterions are usually needed to provide electrical conductivity, their overall effects on the thermoelectric response of the systems are unknown and uncontrolled. Here, we present a first principles study of the electronic and thermal transport of PEDOT crystalline assemblies, specifically analysing the role played by tosylate dopants on the thermoelectric figure of merit of the doped system. Our results demonstrate that, beside the desired charging effect, the presence of dopants impacts the bulk configuration by inflating the packing structure and worsening the intrinsic transport properties of the PEDOT host. This provides a rationale for the necessity of controlling the optimal amount and the structural incorporation of dopant in order to maximize the thermoelectric response of organic materials.

Anchor group versus conjugation: toward the gap-state engineering of functionalized ZnO(1010) surface for optoelectronic applications.

Molecular sensitization of the single-crystal ZnO (1010) surface through absorption of the catechol chromophore is investigated by means of density functional approaches. The resulting type II staggered interface is recovered in agreement with experiments, and its origin is traced back to the presence of molecular-related states in the gap of metal-oxide electronic structure. A systematic analysis carried out for further catecholate adsorbates allows us to identify the basic mechanisms that dictate the energy position of the gap states. The peculiar level alignment is demonstrated to be originated from the simultaneous interplay among the specific anchoring group, the backbone conjugation, and the lateral functional groups. The picture derived from our results provides efficient strategies for tuning the lineup between molecular and oxide states in hybrid interfaces with potential impact for ZnO-based optoelectronic applications.

Hydroxyl-rich beta-sheet adhesion to the gold surface in water by first-principle simulations.

Proteins able to recognize inorganic surfaces are of paramount importance for living organisms. Mimicking nature, surface-recognizing proteins and peptides have also been man-made by combinatorial biochemistry. However, to date the recognition mechanisms remain elusive, and the underlying physicochemical principles are still unknown. Selectivity of gold-binding peptides (cysteine-free and rich in hydroxyl amino acids) is particularly puzzling, since the most relevant gold surface, Au(111), is known to be chemically inert and atomically flat. Using atomistic first-principle simulations we show that weak chemical interactions of dative-bond character confer to a prototype secondary structure (an antiparallel beta-sheet made of hydroxyl amino acids) and its hydration layer the capability of discriminating among gold surface sites. Our results highlight the unexpected role of hydration water in this process, suggesting that hydrophilic amino acids and their hydration shell cooperate to contribute to protein-gold surface recognition.

Hydration of cyanin dyes.

We investigated the hydration properties of the cyanin dye molecule in the ionic flavylium configuration, through massive classical (force field) and ab initio (Car-Parrinello) molecular dynamics simulations at room temperature. Classical and quantum mechanical results coherently describe the structure of the first solvation shell. We discuss the hydrophobicity/hydrophilicity of the molecule in terms of attractive lateral hydroxyl-water and repulsive carbon pi-water interactions. The analysis of the electronic structure shows a net polarization and a molecular orbital redistribution induced by the polar solvent on the intrinsic (gas phase) properties of the dye. Changing the properties of the molecule, the hydration effects should be carefully taken into account in the further interactions of cyanin with the external environment.

Augmented band gap tunability in indium-doped zinc sulfide nanocrystals.

Doping semiconductor nanocrystals is a powerful tool to impart new and beneficial optical and electrical properties to the host nanocrystals. Doping has been used to improve the performances of nanocrystal-based devices in applications as diverse as optics, magnetism, electronics, catalysis and sensing. In this work we present a low temperature colloidal synthesis of zinc sulfide (ZnS) nanocrystals doped with indium. Through optimization of the reaction parameters and the doping level, quantum confined (∼2 nm in size) crystalline colloids with highly tunable optical properties are achieved. Using a suite of characterization techniques including X-ray diffraction, high-resolution transmission electron microscopy, optical spectroscopies (absorption, emission, and Raman), compositional analyses and first principles simulations, we investigate the structural, morphological and optical properties of the synthesized nanocrystals. Indium dopants are found to heavily influence the band gap of ZnS. This strategy in addition to traditional methods of size control enables the synthesis of nanocrystals with finely tunable band gaps between ∼3.8 eV-4.3 eV. These doped ZnS nanocrystals are fabricated into selective UV thin-film absorbers and discriminatory proof-of-concept UVA-UVB/C photodetectors.

Codoping and Interstitial Deactivation in the Control of Amphoteric Li Dopant in ZnO for the Realization of p-Type TCOs.

We report on first principle investigations about the electrical character of Li-X codoped ZnO transparent conductive oxides (TCOs). We studied a set of possible X codopants including either unintentional dopants typically present in the system (e.g., H, O) or monovalent acceptor groups, based on nitrogen and halogens (F, Cl, I). The interplay between dopants and structural point defects in the host (such as vacancies) is also taken explicitly into account, demonstrating the crucial effect that zinc and oxygen vacancies have on the final properties of TCOs. Our results show that Li-ZnO has a p-type character, when Li is included as Zn substitutional dopant, but it turns into an n-type when Li is in interstitial sites. The inclusion of X-codopants is considered to deactivate the n-type character of interstitial Li atoms: the total Li-X compensation effect and the corresponding electrical character of the doped compounds selectively depend on the presence of vacancies in the host. We prove that LiF-doped ZnO is the only codoped system that exhibits a p-type character in the presence of Zn vacancies.

New energy with ZnS: novel applications for a standard transparent compound.

We revise the electronic and optical properties of ZnS on the basis of first principles simulations, in view of novel routes for optoelectronic and photonic devices, such as transparent conductors and plasmonic applications. In particular, we consider doping effects, as induced by Al and Cu. It is shown that doping ZnS with Al imparts a n-character and allows for a plasmonic activity in the mid-IR that can be exploited for IR metamaterials, while Cu doping induces a spin dependent p-type character to the ZnS host, opening the way to the engineering of transparent p-n junctions, p-type transparent conductive materials and spintronic applications. The possibility of promoting the wurtzite lattice, presenting a different symmetry with respect to the most stable and common zincblende structure, is explored. Homo- and heterojunctions to twin ZnO are discussed as a possible route to transparent metamaterial devices for communications and energy.

S-induced modifications of the optoelectronic properties of ZnO mesoporous nanobelts.

The synthesis of ZnO porous nanobelts with high surface-to-volume ratio is envisaged to enhance the zinc oxide sensing and photocatalytic properties. Yet, controlled stoichiometry, doping and compensation of as-grown n-type behavior remain open problems for this compound. Here, we demonstrate the effect of residual sulfur atoms on the optical properties of ZnO highly porous, albeit purely wurtzite, nanobelts synthesized by solvothermal decomposition of ZnS hybrids. By means of combined cathodoluminescence analyses and density functional theory calculations, we attribute a feature appearing at 2.36 eV in the optical emission spectra to sulfur related intra-gap states. A comparison of different sulfur configurations in the ZnO matrix demonstrates the complex compensating effect on the electronic properties of the system induced by S-inclusion.

Shear Piezoelectricity in Poly(vinylidenefluoride-co-trifluoroethylene): Full Piezotensor Coefficients by Molecular Modeling, Biaxial Transverse Response, and Use in Suspended Energy-Harvesting Nanostructures.

The intrinsic flexible character of polymeric materials causes remarkable strain deformations along directions perpendicular to the applied stress. The biaxial response in the shear piezoelectricity of polyvinylidenefluoride copolymers is analyzed and their full piezoelectric tensors are provided. The microscopic shear is exploited in single suspended nanowires bent by localized loading to couple flexural deformation and transverse piezoelectric response.

Origin of the accumulation layer at the InN/a-In2O3 interface.

We perform first-principles Density Functional Theory calculations for the amorphous In2O3/InN (11̅00) heterostructure. Our results suggest that the interface between InN and its native amorphous oxide is a type "I" interface as observed in X-ray photoemission spectroscopy data for the same materials in the crystalline form. The microscopic analysis of the system reveals the presence of peculiar structural features localized at the interface, such as the formation of N-O bonds and the existence of N dangling bonds, that are responsible for donor states. These findings shed light on the origin of the electron accumulation layer occurring at the interface in spontaneously oxidized InN nanowires, recently associated with the observed increase in conductivity for such systems.

Direct determination of polarity, faceting, and core location in colloidal core/shell wurtzite semiconductor nanocrystals.

The ability to determine the atomic arrangement and termination of various facets of surfactant-coated nanocrystals is of great importance for understanding their growth mechanism and their surface properties and represents a critical piece of information that can be coupled to other experimental techniques and to calculations. This is especially appealing in the study of nanocrystals that can be grown in strongly anisotropic shapes, for which the relative growth rates of various facets can be influenced under varying reaction conditions. Here we show that in two representative cases of rod-shaped nanocrystals in the wurtzite phase (CdSe(core)/CdS(shell) and ZnSe(core)/ZnS(shell) nanorods) the terminations of the polar facets can be resolved unambiguously by combining advanced electron microscopy techniques, such as aberration-corrected HRTEM with exit wave reconstruction or aberration-corrected HAADF-STEM. The [0001] and [000-1] polar directions of these rods, which grow preferentially along their c-axis, are revealed clearly, with one side consisting of the Cd (or Zn)-terminated (0001) facet and the other side with a pronounced faceting due to Cd (or Zn)-terminated {10-1-1} facets. The lateral faceting of the rods is instead dominated by three nonpolar {10-10} facets. The core buried in the nanostructure can be localized in both the exit wave phase and HAADF-STEM images.

Wetting behavior of low-index cubic SiC surfaces.

We report on the interaction of water molecules with polar and nonpolar stoichiometric surfaces of cubic silicon carbide, as described by ab initio molecular dynamics at finite temperature. Our calculations show that, irrespective of coverage, in the gas phase water spontaneously dissociates on both polar Si-terminated (001) and nonpolar (110) surfaces, following similar mechanisms. The specific geometric arrangement of atoms on the outermost surface layer is responsible for water orientation and coordination and thus plays a major role in determining surface reactivity. This is found to be the case also for water on a computer-generated amorphous-SiC surface. In addition, from a macroscopic standpoint, the ability of the two crystalline surfaces with different polarities to induce water dissociation can be related to the similarities of their ionization potentials.

Ab initio exploration of rearrangement reactions: intramolecular hydrogen scrambling processes in acetone.

The recently developed metadynamics method is applied to the intramolecular hydrogen migration reactions of acetone in the gas phase. Comparison of different sets of collective coordinates allows efficient description of the underlying free energy surface. The simulations yielded numerous reactions: the enol-oxo tautomerism, the decomposition of acetone to various products, and rearrangement reactions. On the basis of the calculated activation barriers it is concluded that the enol-oxo tautomerism is the most frequent intramolecular proton-exchange process the acetone undergoes in the gas phase.

Ab initio molecular dynamics study of the keto-enol tautomerism of acetone in solution.

We have studied the keto-enol interconversion of acetone to understand the mechanism of tautomerism relevant to numerous organic and biochemical processes. Applying the ab initio metadynamics method, we simulated the keto-enol isomerism both in the gas phase and in the presence of water. For the gas-phase intramolecular mechanism we show that no other hydrogen-transfer reactions can compete with the simple keto-enol tautomerism. We obtain an intermolecular mechanism and remarkable participation of water when acetone is solvated by neutral water. The simulations reveal that C deprotonation is the kinetic bottleneck of the keto-enol transformation, in agreement with experimental observations. The most interesting finding is the formation of short H-bonded chains of water molecules that provide the route for proton transfer from the carbon to the oxygen atom of acetone. The mechanistic picture that emerged from the present study involves proton migration and emphasizes the importance of active solvent participation in tautomeric interconversion.

Towards SiC surface functionalization: an ab initio study.

We present a microscopic model of the interaction and adsorption mechanism of simple organic molecules on SiC surfaces as obtained from ab initio molecular-dynamics simulations. Our results open the way to functionalization of silicon carbide, a leading candidate material for biocompatible devices.

Water at a hydrophilic solid surface probed by ab initio molecular dynamics: inhomogeneous thin layers of dense fluid.

We present a microscopic model of the interface between liquid water and a hydrophilic, solid surface, as obtained from ab initio molecular dynamics simulations. In particular, we focused on the (100) surface of cubic SiC, a leading semiconductor candidate for biocompatible devices. Our results show that in the liquid in contact with the clean substrate, molecular dissociation occurs in a manner unexpectedly similar to that observed in the gas phase. After full hydroxylation takes place, the formation of a thin (approximately 3 A) interfacial layer is observed, which has higher density than bulk water and forms stable hydrogen bonds with the substrate. The presence of this thin layer points at rather weak effects on the structural properties of water induced by a one-dimensional confinement between approximately 1.3 nm hydrophilic substrates. In addition, our results show that the liquid does not uniformly wet the surface, but molecules preferably bind along directions parallel to the Si dimer rows.

Ab initio study of misfit dislocations at the SiC/Si(001) interface.

The high lattice mismatched SiC/Si(001) interface was investigated by means of combined classical and ab initio molecular dynamics. Among the several configurations analyzed, a dislocation network pinned at the interface was found to be the most efficient mechanism for strain relief. A detailed description of the dislocation core is given, and the related electronic properties are discussed for the most stable geometry: we found interface states localized in the gap that may be a source of failure of electronic devices.

Atomic control of water interaction with biocompatible surfaces: the case of SiC(001).

The interaction of water with Si- and C- terminated beta-SiC(001) surfaces was investigated by means of ab initio molecular dynamics simulations. Irrespective of coverage, varied from 1/4 to 1 monolayer, we found that water dissociates on the Si-terminated surface, substantially modifying the clean surface reconstruction, while the C-terminated surface is nonreactive and hydrophobic. Based on our results, we propose that STM images and photoemission experiments may detect specific changes induced by water on both the structural and electronic properties of SiC(001) surfaces.