Finding the missing many: improving Tuberculosis care in Kajiado county through active case finding and community approaches.

BACKGROUND: Tuberculosis related deaths remain a priority globally. Despite advancements in TB care, access to quality care remains inequitable to the disadvantage of those in rural and urban informal settlements. The Awareness, Traditions, and Innovation in combating Tuberculosis (ATI TB) project incorporated active case finding (ACF), use of GeneXpert technology and decentralized services to improve TB care in Kajiado County. This study sought to establish the impact of the project as well as implementation lessons learnt during its tenure in Kajiado County, Kenya. METHODS: This evaluation adopted a mixed-methods approach with retrospective cohort analysis for the quantitative data and qualitative data sought through key informant interviews with 28 purposively sampled respondents. The qualitative data was analyzed thematically using Taguette while quantitative data was analyzed using R Software yielding descriptive statistics and measures of association. RESULTS: While the males were a minority among the presumptive cases (623; 46%), they were the majority (59.3%) among the confirmed TB cases. 70% of the confirmed cases were aged between 15 and 44 years; with those aged between 25- and 34-years being majority (30% of the cases). Majority of the confirmed cases within the project were from rural Kajiado West (79; 66.9%). Though 61% of the presumptive cases were through ACF, only 7% of these tested positive. Conversely, 13% of the self-referrals tested positive. 53% (66) of the positive cases with valid data were self-referrals while ACF accounted for 47% (58) of the positives. CONCLUSION: Continued capacity development among health workers, sustained and targeted sensitization and screening among vulnerable groups, strategic collaborations, alongside increased budgetary prioritization of health and TB care by government and partners, and government investments in Social Determinants of Health can ensure gains in TB care are sustained.

Apical incisor root resorption due to ectopic maxillary canine eruption: Association with time of diagnosis and type of intervention in a retrospective population-based cohort study.

OBJECTIVES: The primary aim was to study upper incisor severe apical root resorption (RR) related to ectopic canine eruption and its association with timing of diagnosis and type of intervention conducted. The secondary aim was to correlate resorption with other dental anomalies. MATERIALS AND METHODS: Digital journals and radiographic material of all ectopic maxillary canines registered in 2012 in the regional public paediatric dental clinics in the Council of Aarhus were inspected retrospectively. Data related to 10 variables were retrieved. Post-treatment radiographs were used for evaluation of incisor RR. RESULTS: A total of 260 ectopic maxillary canines were diagnosed in 2012. The majority were found in the 9-13-year-old age group (0.8% prevalence within the total population). In all, 244 canines were assessed for eligibility and 181 had adequate final radiographs for evaluation of RR. Among ectopic maxillary canines, 9.4% caused severe incisor RR to neighbouring teeth. Timely palpation for canine eruption significantly reduced the odds for upper incisor resorption by 80%. Multiple regression showed that when the permanent canine cannot be palpated and the deciduous has been extracted, delaying the first X-rays was associated with a 38% odds ratio increase for RR for each year of delay after the age of 10 years. No significant associations were found between incisor RR and intervention conducted or other dental anomalies. CONCLUSION: Palpation of erupting maxillary canines is crucial for timely diagnosis of ectopic eruption and initiation of treatment to avoid RR. If the canine cannot be palpated at 10 years of age, radiographic examination is highly recommendable.

Health-related quality of life, jaw function and sleep-disordered breathing among patients with dentofacial deformity.

BACKGROUND AND OBJECTIVES: Patients with dentofacial deformity (DFD) requiring orthognathic treatment have poor aesthetics, jaw function and psychological well-being, which potentially affect the quality of life. This study aimed to investigate the health-related general, oral and orthognathic quality of life, jaw function and sleep-disordered breathing at different stages of orthognathic surgical treatment. METHODS: A total of 120 consecutive patients with DFD were recruited and grouped as pre-orthodontic treatment (group 1), pre-surgery (group 2), 4 months post-surgery (group 3), 24 months post-surgery (group 4) and in addition 30 controls without DFD (group 0). Outcomes were assessed using general health Short Form Survey (SF-36), Oral Health Impact (OHIP-14), Orthognathic Quality of Life Questionnaire (OQLQ), STOP-Bang and Jaw Function Limitation Scale (JFLS) questionnaires. In addition, presence or absence of pain was recorded. Data were tested with analysis of variance, Kruskal-Wallis test, Tukey post hoc test and structural equation modelling (SEM). RESULTS: Results revealed SF-36 (p = .814) and STOP-Bang (p = .143) total scores did not differ between control and treatment groups. In contrast, OHIP-14, OQLQ and JFLS total scores differed between groups (p = .001). Higher scores were observed in groups 1 (p = .001), 2 (p = .001) and 3 (p = .041) compared to group 0, indicating poor oral health in patients with DFD. Importantly, in group 4, oral health-related quality of life was better, and OHIP-14 (p = .936) and JFLS (p = .572) scores did not differ from controls. OQLQ scores of group 4 were significantly lower than group 1 (p = .001) but higher than group 0 (p = .013). SEM results revealed a significant negative associations of pain with JFLS and OQLQ; OHIP-14 with OQLQ; OHIP-14 with SF-36; and finally STOP-Bang with SF-36. Positive associations were observed between JFLS and OHIP-14; OHIP-14 and OQLQ. CONCLUSION: Oral health-related quality of life and jaw function appears to be improved 24 months after orthognathic surgery. Pain and limitation in jaw function had a negative association with health-related quality of life.

Stability, survival, patient satisfaction, and cost-minimization of CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 2-year follow-up of a two-centre randomized controlled trial.

BACKGROUND: CAD/CAM (computer-aided design/computer-aided manufacturing) fixed retainers (FRs) as an alternative to multistranded FRs to maintain orthodontic treatment outcome. OBJECTIVES: The primary aim was to compare CAD/CAM versus conventional multistranded FRs in terms of stability until 2 years. Secondary outcomes were failure rates, patient satisfaction, and cost-minimization. TRIAL DESIGN: 2-arm parallel, two-centre randomized controlled trial. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in a 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. FRs were bonded at the end of treatment, and patients were recalled after 12 and 24 months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. Cost-minimization analysis was undertaken. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): 90 in CAD/CAM and 91 in conventional group. One hundred and fifty three patients attended T24 follow-up. There were no significant differences in LII and arch dimensions between groups for failure-free patients. Within 24 months, 34% maxillary CAD/CAM FRs and 38% maxillary conventional FRs failed, along with 42% mandibular CAD/CAM FRs and 40% mandibular conventional FRs, with no significant difference in survival between groups (hazard ratios conventional to CAD/CAM: maxillary arch: 1.20 [P = 0.46], mandibular arch: 0.98 [P = 0.94]). There were no significant differences in patient satisfaction between groups. No harms were observed. Cost-minimization analysis showed that CAD/CAM FRs were slightly cheaper than conventional FRs. CONCLUSIONS: There were no clinically significant differences in LII, arch widths, and lengths between CAD/CAM and conventional FRs after 24 months. There were no differences in failures and patient satisfaction between groups. CAD/CAM FRs were slightly cheaper than conventional FRs. TRIAL REGISTRATION: ClinicalTrials.gov NCT04389879.

Intrusion of overerupted periodontally compromised posterior teeth using orthodontic mini implants: A mechanobiological finite element study.

INTRODUCTION: The intrusion of posterior teeth had been considered challenging up to the development of orthodontic mini implants. In periodontally compromised teeth, the challenge is even greater, because of the root resorption risk due to periodontal ligament over-compression. Still, the precise strategy to determine the force reduction level remains uncertain. OBJECTIVE: The objective of the study was to determine, by a finite element analysis (FEA), the force reduction needed to avoid root resorption and maintain the efficiency of orthodontic mechanics of periodontally compromised teeth similar to the sound one. METHODS: An anatomical model was constructed representing a premolar inserted into a maxillary bone. Based on the initial model (R0), three bone height loss conditions were simulated (R2 = 2 mm, R4 = 4 mm, and R6 = 6 mm). Two intrusive movements were simulated: pure intrusion (bilateral mini implant) and uncontrolled-tipping intrusion (buccal mini implant). The hydrostatic stress at the periodontal ligament was used to evaluate the risk of root resorption due to over-compression. RESULTS: For bilateral mini implant intrusion, the force had to be decreased by 16%, 32% and 48% for R2, R4 and R6, respectively. For buccal mini implant intrusion, the required reductions were higher (20%, 36% and 56%). A linear relationship between the intrusive force reduction and the alveolar bone height loss was observed in both intrusion mechanics. CONCLUSIONS: According to the FE results, 8% or 9.3% of force reduction for each millimetre of bone height loss is suggested for intrusion with bilateral or buccal mini implant, respectively. The buccal mini implant anchorage must be associated with a supplemental strategy to avoid buccal crown tipping.

Associations between temporomandibular disorders, pain, jaw and masticatory function in dentofacial deformity patients: A cross-sectional study.

BACKGROUND AND OBJECTIVE: Patients with dentofacial deformity often present with impaired masticatory function, orofacial pain and temporomandibular disorders (TMD). This study investigates the relationship between TMD, pain, jaw and masticatory function at different stages of orthognathic surgical (OS) treatment. METHODS: A total of 120 OS patients were prospectively recruited and grouped as pre-orthodontic (group 1), pre-surgery (group 2), 4-month post-surgery (group 3), 24-month post-surgery (group 4), in addition to 30 controls (group 0). Outcomes were assessed using: Jaw Function Limitation Scale (JFLS), McGill pain questionnaire, DC/TMD instrument, voluntary maximum bite force (MVBF), and masticatory efficiency (ME) using two-coloured chewing gum. Data were analysed using structural equation modelling. RESULTS: The prevalence of non-painful TMD did not differ between groups (p = .827). However, the prevalence of painful TMD differed between groups (p = .001). Among the painful TMDs, the highest prevalence was observed for masseter myalgia in group 2 (p = .031), and importantly group 4 did not differ from group 0 (p = .948). The MPQ score was significantly higher in group 1 (p = .001) compared to group 0, and the JFLS score was significantly higher in groups 1, 2 and 3 compared to group 0. Notably, MPQ (p = .756) and JFLS (p = .572) scores in group 4 were not different from group 0. However, MVBF (p = .996) and ME (p = .991) did not differ between groups 1 and 4. The association of self-reported pain and jaw function with the masticatory function was observed in OS patients. CONCLUSION: OS was not associated with a negative impact on TMD. Jaw function and pain levels were similar to controls at the 24-month follow-up. The masticatory function was further affected by the surgery and seems to require a longer recovery time. Moreover, it was confirmed that pain and TMD were associated with limitations in jaw function and impacts on masticatory function.

Stability, survival, and patient satisfaction with CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 6-month follow-up of a two-centre randomized controlled clinical trial.

OBJECTIVES: The primary aim of this two-arm parallel two-centre randomized controlled trial was to compare computer-aided design and computer-aided manufacturing (CAD/CAM) versus conventional multistranded fixed retainers (FRs) in terms of stability over 6 months. Secondary outcomes were failure rates and patient satisfaction. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. Retainers were bonded at the end of orthodontic treatment (T0), and patients were recalled after 1 (T1), 3 (T3), and 6 (T6) months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): Ninety in the CAD/CAM group and 91 in the conventional group. Three subjects dropped out at baseline, as they did not attend any of the follow-up appointments.168 patients attended the T6 visit. There were no significant differences in arch dimensions between T0 and T6, whilst the LII was different only in the CAD/CAM group (mean difference: 0.2 mm; 95% confidence interval: 0.1 to 0.4; P < 0.001). Within 6 months, 39 upper retainers (19 out of 88 CAD/CAM and 20 out of 90 conventional retainers) and 52 lower retainers failed (26 out of 88 CAD/CAM and 26 out of 90 conventional retainers), with no significant difference between the survival of both types of retainers (hazard ratios conventional to CAD/CAM: upper arch: 0.99 [P =0.99], lower arch: 0.93 [P = 0.80]). There were no significant changes in patient satisfaction between the groups. No harms were observed. CONCLUSIONS: There were no clinically significant differences in LII, arch widths and lengths between CAD/CAM and conventional retainers after 6 months. There was no difference in failures and in patient satisfaction between both types of FRs. REGISTRATION: ClinicalTrials.gov NCT04389879.

How efficient is customized lingual orthodontics? An assessment of treatment outcome.

OBJECTIVE: To assess the efficacy of lingual orthodontics by comparing setups and post-treatment casts. SETTING AND SAMPLE POPULATION: Thirty-two consecutive patients treated with a customized lingual orthodontic appliance were included in this retrospective study. MATERIALS AND METHODS: Initial casts, post-treatment casts and setups were scanned, and the digital models produced were analysed in terms of overjet; overbite; molar and canine relationships; intercanine, interpremolar and intermolar distances; upper and lower arch lengths; midline deviation; bucco-lingual angulation of all teeth and mesio-distal angulation of anterior teeth. Comparisons between setups and post-treatment casts were performed via paired t tests. Relationships between the planned and actual correction were studied using regression analysis. RESULTS: Statistically significant differences in bucco-lingual torque between setups and post-treatment casts were found for all upper teeth, except for central incisors. In the lower jaw, statistically significant differences in bucco-lingual torque were found between setups and post-treatment casts for the lower incisors and molars. No statistically significant differences in mesio-distal angulation of anterior teeth were found between setups and post-treatment casts. Upper and lower arch widths did not vary significantly between setups and final casts, except upper inter-second premolar and intermolar distances. CONCLUSION: Customized lingual appliances offer efficient control of mesio-distal angulation of all anterior teeth. Significant differences in torque between setups and post-treatment casts were observed for upper lateral incisors, canines, premolars and molars, as well as lower incisors and molars. However, the torque difference was clinically significant (over three degrees) for upper second premolars and molars only.

Does quality of orthodontic treatment outcome influence post-treatment stability? A retrospective study investigating short-term stability 2 years after orthodontic treatment with fixed appliances and in the presence of fixed retainers.

OBJECTIVE: The present study aimed to evaluate stability 2 years after orthodontic treatment and to investigate the influence of various pre-treatment and post-treatment prognostic factors on stability. SETTING AND SAMPLE POPULATION: Consecutive patients treated with full fixed appliance and retained with fixed retainers were retrospectively assessed for eligibility. MATERIALS AND METHODS: Digital models were analysed at treatment start (T0), end of treatment (T1) and 2 years post-treatment (T2). The Peer Assessment Rating (PAR) index, Little's Irregularity Index (LII), arch width and length, overjet, overbite and presence of unexpected post-treatment changes were assessed. Multiple regression analyses were conducted to model the relationship of all outcomes with several prognostics simultaneously. RESULTS: The sample consisted of 287 subjects (mean treatment time: 25.1 months, standard deviation [SD] 7.5; mean post-treatment follow-up: 27.5 months, SD 6.1) with a mean weighted PAR score of 29.5 (SD 8.6) at T0, 1.8 (SD 2.9) at T1 and 3.2 (SD 3.6) at T2. At T1, 95% of the subjects had a perfect LII versus 86% at T2. An increased LII at T1 correlated with increased LII and PAR changes from T1 to T2. PAR at T1 as well as overjet at T0 was a significant prognostic factor for PAR at T2. At T2, five cases (1.7%) showed unexpected post-treatment changes related to fixed retainers. CONCLUSION: Short-term post-treatment stability with fixed retainers was very good. Prognostic factors for stability included LII and PAR at T1, suggesting that high-quality treatment outcome in the presence of fixed retainers may ensure post-treatment stability.

Malocclusion and oral health-related quality of life among young Danish adults. Is there a difference between subjects who received orthodontic treatment during adolescence and subjects without treatment need? A cross-sectional study.

OBJECTIVES: To evaluate and compare malocclusion traits and oral health-related quality of life (OHRQoL) between untreated young adults assessed to have no orthodontic treatment need during childhood, and young adults treated orthodontically during childhood. In addition, to investigate the relationship between malocclusion and OHRQoL. MATERIALS AND METHODS: One hundred undergraduate students were screened for eligibility. Subjects had intraoral scans and completed OHIP-14 questionnaires. Angle molar relationship, overjet, overbite, arch length and width, Little's Irregularity Index (LII), Peer Assessment Rating (PAR) index and Dental Aesthetic Index (DAI) scores were assessed. Unpaired t-tests were used to compare outcomes between treated and untreated subjects. Multiple regression analyses were conducted to model the relationship between OHIP-14 and several prognostics simultaneously. RESULTS: Ninety-six subjects were included (mean age ± SD = 23.7 ± 1.8 years): 41 treated and 55 untreated. The untreated subjects had significantly higher LII (p = .02), PAR (p = .01), DAI (p < .01) and overbite (p = .03). The treated subjects had significantly larger inter-canine and inter-premolar distances. No relationship was found between OHIP-14 and LII, PAR, DAI, age, gender and presence/absence of previous orthodontic treatment. However, the DAI score was significantly correlated with the OHIP-14 functional limitation domain. CONCLUSIONS: Untreated subjects had significantly higher LII, PAR and DAI scores than the treated subjects. DAI score was significantly correlated with the OHIP-14 functional limitation domain.

Translation and cross-cultural adaptation of the sleep-related breathing disorder scale of the Pediatric Sleep Questionnaire into Danish language.

OBJECTIVE/BACKGROUND: Sleep-disordered breathing (SDB) is common but often underestimated in children. The gold standard for assessing SDB is polysomnography, but it is expensive and time-consuming. The Paediatric Sleep Questionnaire (PSQ/SRDB) is a validated screening tool for SDB, which represents an efficient and alternative tool for screening SDB among children. However, a translated and validated Danish version of the PSQ/SRDB is not available yet. Our aim was to cross-culturally translate the PSQ/SRDB into Danish language for use in clinical and research settings. PATIENTS/METHODS: The translation was carried out through forward-backward translation techniques performed by a panel of experts, and the cross-cultural adaptation was achieved by pretesting of the pre-final version. Internal consistency of the Danish PSQ/SRDB version was measured by Cronbach's alpha coefficients, while Cohen's kappa was used to evaluate test-retest reliability. Construct validity was assessed by factor analysis of the principal components. RESULTS: The Danish PSQ/SRDB was administered to the caregivers of 348 children. An overall Cronbach's alpha of 0.72 was found, confirming the survey's consistency, with the results for the domains ranging 0.52-0.70. The Danish PSQ/SRDB showed moderate to perfect reliability for all items, except for one question (C14). Factor analysis performed on the Danish PSQ/SRDB showed that the predetermined four factors were similar with the original version of the PSQ/SRDB. CONCLUSIONS: The Danish version of the PSQ/SRDB has been successfully translated and cross-culturally adapted, suggesting that it can be used as an appropriate paediatric screening tool for SDB in Denmark.

Indirect vs direct bonding of mandibular fixed retainers in orthodontic patients: Comparison of retainer failures and posttreatment stability. A 5-year follow-up of a single-center randomized controlled trial.

INTRODUCTION: This 2-arm parallel trial aimed to assess the number of failures of mandibular fixed retainers bonded with direct and indirect bonding methods at a 5-year follow-up and investigate the stability of intercanine and interpremolar distances. METHODS: Consecutive patients from the clinic of the University of Geneva (Switzerland) were randomly allocated to either direct or indirect bonding of a mandibular fixed retainer at the end of orthodontic treatment. Inclusion criteria included the presence of all mandibular incisors and canines; and the absence of active caries, restorations, fractures, or periodontal disease of these teeth. The patients were randomized in blocks of 4 using an online randomization service, with allocation concealment secured by contacting the sequence generator for assignment. Two and 5 years (T5) after bonding the retainers, the patients were recalled, and impressions were taken. The primary outcome was the 5-year survival of the mandibular fixed retainer bonded with both bonding methods. The secondary outcomes were the intercanine and interpremolar distances and the assessment of unexpected posttreatment changes (ie, changes in torque and/or rotations of the mandibular incisors and canines). Blinding was applicable for outcome assessment only. Kaplan-Meier curves were generated, and a Cox proportional hazard regression model was fitted for bonding type, age, and treatment. Linear mixed models were fitted to intercanine and interpremolar distances: bonding type, time, age, and treatment were modeled as outcomes. RESULTS: Sixty-four patients were randomized in a 1:1 ratio. At T5, 6 patients without previous failure were lost to follow-up from each group. At T5, the fixed retainer was debonded in 14 patients (54%) for each group. The hazard ratio of indirect bonding to direct bonding was 1.09 (95% confidence interval, 0.26-4.60; P = 0.91); there was no statistically significant difference in survival between the groups. Regarding intercanine and interpremolar distances, none of the tested prognostic factors reached statistical significance. Unexpected posttreatment changes were observed in 6 failure-free patients, all bonded with the direct bonding method. Only 1 patient required debonding of the fixed retainer. No other serious harms were observed. CONCLUSIONS: The 5-year survival rate for both direct and indirect bonding methods was 46%, without a statistically significant difference between bonding methods. Bonded retainers were effective in maintaining intercanine and interpremolar distances. Unexpected posttreatment changes were only observed with retainers bonded with the direct bonding method. REGISTRATION: The trial was not registered. PROTOCOL: The protocol was not published before trial commencement. FUNDING: No funding or conflict of interest to be declared.

Orthodontic Tooth Movement Studied by Finite Element Analysis: an Update. What Can We Learn from These Simulations?

PURPOSE OF REVIEW: To produce an updated overview of the use of finite element (FE) analysis for analyzing orthodontic tooth movement (OTM). Different levels of simulation complexity, including material properties and level of morphological representation of the alveolar complex, will be presented and evaluated, and the limitations will be discussed. RECENT FINDINGS: Complex formulations of the PDL have been proposed, which might be able to correctly predict the behavior of the PDL both when chewing forces and orthodontic forces are simulated in FE models. The recent findings do not corroborate the simplified view of the classical OTM theories. The use of complex and biologically coherent FE models can help understanding the mechanisms leading to OTM as well as predicting the risk of root resorption related to specific force systems and magnitudes.

Individualization of the three-piece base arch mechanics according to various periodontal support levels: A finite element analysis.

INTRODUCTION: The orthodontic correction of periodontally compromised dentitions constitutes a huge challenge in the clinical practice of adult orthodontics. The biological and physical distinct features of these conditions require a carefully designed mechanical plan for the successful treatment of these complex cases. SETTING AND SAMPLE POPULATION: A segment of a human maxilla containing the central and lateral incisors, obtained from autopsy, was scanned with microcomputed tomography, and a finite element (FE) model was generated to represent an intact periodontal dentition. Based on this model, three additional models simulating a mild, moderate and severe bone alveolar loss were created as well. MATERIALS AND METHODS: Two loading scenarios for the application of intrusive and retraction mechanics with a three-piece base arch appliance were evaluated in a series of FE analyses. The tooth displacements and strains in the periodontal ligament (PDL) were calculated and compared for the four FE models. RESULTS: The periodontal reduced dentitions exhibited a similar axis of resistance for intrusive mechanics, but the axis of resistance for retraction movements was significantly dependent on the degree of alveolar bone loss. The tooth displacements and PDL loads were higher in the reduced dentitions for both intrusive and retraction mechanics. CONCLUSIONS: A reduction in the force levels applied to periodontal reduced dentitions is indicated, and a customized selection of appropriate points of force application is needed according to the specific amount of alveolar bone loss.

A community detection analysis of malocclusion classes from orthodontics and upper airway data.

OBJECTIVE: The interaction between skeletal class and upper airway has been extensively studied. Nevertheless, this relationship has not been clearly elucidated, with the heterogeneity of results suggesting the existence of different patterns for patients' classification, which has been elusive so far, probably due to oversimplified approaches. Hence, a network analysis was applied to test whether different patterns in patients' grouping exist. SETTINGS AND SAMPLE POPULATION: Ninety young adult patients with no obvious signs of respiratory diseases and no previous adeno-tonsillectomy procedures, with thirty patients characterized as Class I (0 < ANB < 4); 30 Class II (ANB > 4); and 30 as Class III (ANB < 0). MATERIALS AND METHODS: A community detection approach was applied on a graph obtained from a previously analysed sample: thirty-two measurements (nineteen cephalometric and thirteen upper airways data) were considered. RESULTS: An airway-orthodontic complex network has been obtained by cross-correlating patients. Before entering the correlation, data were controlled for age and gender using linear regression and standardized. By including or not the upper airway measurements as independent variables, two different community structures were obtained. Each contained five modules, though with different patients' assignments. CONCLUSION: The community detection algorithm found the existence of more than the three classical skeletal classifications. These results support the development of alternative tools to classify subjects according to their craniofacial morphology. This approach could offer a powerful tool for implementing novel strategies for clinical and research in orthodontics.

Three-dimensional soft tissue changes in orthodontic extraction and non-extraction patients: A prospective study.

OBJECTIVES: To assess the soft tissue changes in orthodontic extraction and non-extraction patients on 3D stereophotogrammetric images. SETTING AND SAMPLE: 23 extraction (22.2 ± 9.2 years) and 23 non-extraction (20.3 ± 11.1 years) consecutive patients were enrolled at the Sections of Orthodontics at Aarhus University and at University of Naples Federico II. METHODS: All patients had a first 3D image taken after bonding of brackets on the upper incisors (T0), and a second 3D image (T1) after space closure in the extraction group or at insertion of the first SS or TMA rectangular wire in the non-extraction group. The 3D images were captured with 3dMDFace System and analysed with 3dMDVultus Software. After placing 19 landmarks, 15 measurements were obtained. Intragroup changes were analysed with paired t-test and intergroup changes with unpaired t-test (P < .05). RESULTS: Superimpositions of the 3D images at T0 and T1 visualized with colour-coded maps showed that soft tissue changes primarily happened in the perioral area in both groups. The Nasolabial angle increased significantly in the extraction group (3°± 4.1, P = .002), while it decreased in the non-extraction group (-1.5°± 5.5°, P = .002). There was a significant difference between the two groups (4.4°, P = .004). CONCLUSIONS: 3D comparison of the soft tissues in the extraction and non-extraction groups showed statistically significant, but clinically limited differences in the perioral area. The Nasolabial angle was significantly larger at T1 in the extraction group compared with the non-extraction group.

Does rapid maxillary expansion enlarge the nasal cavity and pharyngeal airway? A three-dimensional assessment based on validated analyses.

OBJECTIVES: To evaluate the three-dimensional changes following rapid maxillary expansion (RME) of the nasal cavity (NC) and pharyngeal airway (PA) in growing patients, using innovative and validated evaluation methods and to investigate whether a correlation between skeletal expansion and increase in airway volume exists. SETTINGS AND SAMPLE POPULATION: Records of patients who had cone beam computed tomography taken before and after orthodontic treatment with or without RME were retrospectively collected and divided into two groups: (a) RME, 39 patients (mean age 10.40 ± 1.74 years); and (b) control, 29 patients, matched for age (mean age 11.07 ± 1.45 years) and follow-up period. MATERIAL AND METHODS: Total and partial volumes of the NC and the PA were calculated. The PA centerline was determined to assess the minimal cross-sectional area and hydraulic diameter. Paired and unpaired t test were applied to compare the difference between time points and between groups. One-way ANOVA and post hoc Tukey's tests were used to compare subgroups with respect to changes in palatal width and lacrimal ducts distance. RESULTS: All of the NC, PA and skeletal parameters were significantly enlarged after RME. The NC volume and inter-molar distance in the RME were significantly larger compared to the control group. The initially lower mean values of minimal cross-sectional area and hydraulic diameter in the RME group when compared to the control group normalized after RME treatment. CONCLUSIONS: Based on validated analyses, the NC volume increase was evident after RME in the long term after controlling for growth.

Computer-aided design and manufacturing of bone- and tooth-borne maxillary protraction with miniscrews and Class III elastics: Can we contemporize Class III treatments in growing patients?

The purpose of this clinical report is to illustrate an innovative treatment plan for a patient with Class III malocclusion. The plan combined the versatility of computer-aided design and manufacturing technology with miniscrews. Maxillary and mandibular fully customized metal framework anchored to 4 miniscrews was digitally designed and constructed for a growing patient with midface hypoplasia and a skeletal Class III malocclusion. The patient wore Class III elastics between hooks on the maxillary and mandibular frameworks full time for 10 months. Overcorrection was obtained with limited dental side effects, and a significant improvement of the profile was achieved. With the advantages of computer-aided design and manufacturing technology and less invasive insertion procedure compared with miniplate surgery, this patient-specific treatment approach was simple and effective.

Orthodontically induced root resorption: A critical analysis of finite element studies' input and output.

INTRODUCTION: Orthodontically induced inflammatory root resorption (OIIRR) constitutes an undesirable risk connected to orthodontic treatment. Finite element analysis (FEA) is a powerful tool to study the risk of OIIRR. However, its efficiency in predicting OIIRR depends on the insertion of the correct inputs and the selection of an output coherent with the clinical failure mechanism. METHODS: By combining a systematic review with a 3-dimensional FEA, this article discusses which are the implications of using certain periodontal ligament (PDL) properties (linear and nonlinear models) and failure criteria. Six orthodontic loading regimes were simulated in a maxillary premolar: pure intrusion, buccal tipping, and their combination applied with either a light (25 cN) or a heavy (225 cN) force. Three stress parameters in the PDL were compared: von Mises stress, minimum principal stress, and hydrostatic stress (σH). RESULTS: The comparison between linear and nonlinear models showed notable differences in stress distribution patterns and magnitudes. For the nonlinear PDL, none of the light-force models reached the critical compressive hydrostatic stress of 4.7 kPa, whereas all the heavy-force models reached it. In addition, the regions of critical compressive σH matched with the regions with resorption craters in clinical studies. In linear models, the σH critical value of 4.7 kPa was reached even in the light-force scenario. CONCLUSIONS: Only compressive hydrostatic stress in PDL satisfied the requirements to be used as an FEA indicator of OIIRR. However, the requirements were satisfied only when a nonlinear PDL model was considered.

Computer-aided indirect bonding versus traditional direct bonding of orthodontic brackets: bonding time, immediate bonding failures, and cost-minimization. A randomized controlled trial.

INTRODUCTION: The primary aim of this randomized controlled trial was to compare the time for bracket bonding using either direct or computer-aided indirect bonding; a secondary aim was to assess immediate bracket debondings and cost minimization. METHODS: Consecutive patients were randomly allocated to two groups (blocks of four, online-generated sequence) using a split-mouth design with a direct and a computer-aided indirect bonding method: group 1 (upper right and lower left quadrants: indirect bonding; upper left and lower right quadrants: direct bonding) or group 2 (opposite situation). The primary outcome was difference in time spent for bonding brackets. The secondary outcome was immediate bracket debondings (at the bonding appointment). Time for indirect bonding was recorded in two steps: digital bracket placement and clinical bonding procedure. Outcome assessment was blinded. Friedman's ANOVA test was used to assess differences in bonding time. Chi-square test was used to compare immediate debondings. A cost-minimization analysis was undertaken. RESULTS: Thirty-seven patients were randomized to group 1 or 2. Ten patients were excluded: 15 patients were analyzed in group 1 and 12 in group 2. Clinical chair time for bonding half a mouth was significantly shorter for computer-aided indirect bonding (12 minutes 52 seconds) than for direct bonding (16 minutes 47 seconds) (P < 0.001). When adding the time for digital bracket placement, the total bonding time (28 minutes 14 seconds) was longer for indirect bonding than for direct bonding (P < 0.001). There was no single immediate debonding with the direct bonding method, while 14 brackets were lost with the indirect bonding method (5.1 per cent) (P = 0.0001). Cost-minimization analysis showed that computer-aided indirect bonding was more expensive than direct bonding. CONCLUSIONS: The clinical chair time was significantly shorter for computer-aided indirect bonding than for direct bonding. However, the total bonding time for computer-aided indirect, including digital bracket placement, was longer than for direct bonding. There were significantly more immediate debondings with computer-aided indirect bonding than with direct bonding. Under these conditions, computer-aided indirect bonding was more expensive than direct bonding. REGISTRATION: This trial was retrospectively registered on ClinicalTrials.gov (University of Aarhus Protocol Record 10101). PROTOCOL: The protocol was not published before trial commencement.