Lack of clinical predictors for low mineral density in children with celiac disease.

OBJECTIVES: Metabolic bone disease remains a significant and common complication of celiac disease (CD). Several studies have demonstrated low bone mineral density (BMD) at the time of CD diagnosis in both children and adults. Low BMD in children and adolescents is defined as an areal BMD <2 SD below the age-adjusted mean value (z score <-2 SD). The aim of the study was to evaluate the BMD in a pediatric population with CD at diagnosis and to correlate z score value, anti-tissue transglutaminase type 2 antibody (anti-tTG2) titer, symptoms, and Marsh-Oberhuber (MO) grading. METHODS: We enrolled 99 patients with celiac disease (male 35, female 64) ages 4 to 15 years at the diagnosis. All of the patients had positive test results for anti-tTG2 antibodies and histological lesions graded according to MO classification, and underwent lumbar dual-energy x-ray absorptiometry. BMD was estimated by z score. RESULTS: Low BMD (z score ≤-2 SD) was found in 13 (13.13%) patients; 22 (22.22%) patients with CD showed -2 < z score ≤ -1; -1 < z score < 0 was found in 41 (41.41%) patients. z score ≥ 0 was detected only in 23 (23.23%) patients with CD. Mean BMD value in patients with CD is z score -0.68. No correlations were found between z score value and anti-tTG2 titer (Spearman ρ 0.13), between z score value and MO degree (Spearman ρ -0.17), and between z score and symptoms (Spearman ρ-0.10). CONCLUSIONS: BMD of patients with CD at diagnosis does not seem to correlate with MO degree, anti-tTG2 titer, and symptoms. At the moment, we do not have clinical predictors for low mineral density in children with CD.

Skeletal features in patient affected by maxillary canine impaction.

OBJECTIVE: To analyze the skeletal features of patients with maxillary canine impaction. MATERIAL AND METHODS: The complete pre-treatment records of 1674 orthodontic patients were examined. From the subjects with maxillary impacted canine 12 patients were excluded , remaining 108. The subjects with maxillary impacted canine were divided into two study groups: a palatally displaced canine group (PDCG) (77 patients) and a buccally displaced canine group (BDCG) (31 patients). The values of the skeletal features measured on the lateral cephalometric radiograph were compared with a control group (CG) of 121 subjects randomly selected from the initial sample without maxillary canine impaction. The statistical analysis of the difference between the study groups and the CG was tested using χ(2) test and Fisher's exact test. The level of significance was set at P ≤ 0.05. RESULTS: The CG was characterized by increased values of sella- nasion- A point angle (ANB) and by a retro-positioned or smaller lower jaw. PDCG patients showed normal skeletal features compared to the CG, presenting mainly I class and lower rank of II and III sagittal skeletal features. PDCG subjects presented also normal values of the Steiner vertical skeletal relationship angles with normal facial divergence compared to the CG. PDCG cases were also characterized by horizontal and prognathic growth. BDCG did not present significant differences in skeletal features compared to the CG, except for an increased ANB. CONCLUSIONS: Palatally displaced canine (PDC) was frequently the only orthodontic problem of patients and was not associated whit altered skeletal features. The frequent absence of malocclusion in PDC patients explains the delayed identification of this problem. BDCG patients did not present significant differences in skeletal features with respect to the orthodontic population (CG). The presence of both buccally displaced canine (BDC) and malocclusion makes the patient with BDC both aware of the need for, and motivated to undergo, orthodontic treatment.

Three-dimensional analysis of mandibular functional units in adult patients with unilateral posterior crossbite: A cone beam study with the use of mirroring and surface-to-surface matching techniques.

OBJECTIVES: To use three-dimensional (3D) mirroring and surface-to-surface techniques to determine any differences in mandibular functional unit shape and morphology between the crossbite side and non-crossbite side in adult patients with posterior unilateral crossbite who had not received any corrective treatment for malocclusion. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) records from 24 consecutive adult white patients (mean age, 27.5 years; range 22.6-39.7 years; 14 women and 10 men) seeking treatment for maxillary transverse deficiency were assessed in this study. The control group comprised CBCT scans from age- and sex-matched patients. Segmentation masks were generated to obtain 3D surface mesh models of the mandibles and analyze the six skeletal functional units, which were further analyzed with reverse engineering software. RESULTS: Statistically significant differences in the mean surface distance when comparing the study sample and the control sample were found at the condylar process, mandibular ramus, angular process (P ≤ .0001), and alveolar process (P ≤ .01); no statistically significant differences were found for the coronoid process, the chin, and the mandibular body (P ≥ .5). CONCLUSIONS: The condylar, angular, and alveolar processes plus the mandibular ramus appear to play a more dominant role than did the body, the coronoid, and the chin units in the asymmetry of the mandible in patients with unilateral crossbite.

Nanotechnology in Oral Cavity Carcinoma: Recent Trends and Treatment Opportunities.

Oral cavity carcinoma (OCC) remains an ongoing public health problem. Emerging nanotechnology provides alternative treatment approaches. This review covers the up-to-date literature in the human OCC treatment field. We explored the growing body of evidence to reveal novel and highly promising diagnostic and therapeutic applications of nanotechnology in this field. Various types of nanoparticles have been tested for applications in OCC. Imaging modalities in addition to nanocarriers are discussed. The encouraging contribution of lymphotropic nanoparticles contrast in the diagnosis of metastatic cervical lymph nodes needs to be confirmed. The development of the sentinel lymph node procedure and photodynamic therapy may lead to breakthrough therapies in order improve clinical outcomes and quality of life. In this perspective, cancer nanotechnology has the potential to revolutionize the treatment of OCC patients.

Frequency and type of ponticulus posticus in a longitudinal sample of nonorthodontically treated patients: relationship with gender, age, skeletal maturity, and skeletal malocclusion.

OBJECTIVES: The aim of this study was to assess the frequency and type of ponticulus posticus and to evaluate its relationship to gender, chronologic age, skeletal maturity, and skeletal malocclusion. STUDY DESIGN: The sample included the longitudinal lateral cephalograms of 734 patients (378 males and 356 females) retrieved from the American Association of Orthodontists Craniofacial Growth Legacy Collection. The presence of ponticulus posticus (complete and partial forms) was assessed by visual inspection, and the cervical vertebral maturation method was used to determine the skeletal maturation stage. The presence and type (complete or partial) of ponticulus posticus were assessed by gender, age at first appearance of ponticulus posticus, skeletal maturation stage as determined by the cervical vertebral maturation method, and skeletal malocclusion. RESULTS: The overall prevalence of ponticulus posticus was 12.6% (93 of 734) with complete and partial forms observed respectively in 8.7% (64 of 734) and 3.9% (29 of 734) of the sample. Both forms of ponticulus posticus occurred mainly in the age range of 7 to 13 years (P = .04). No differences were found in groups based on gender, skeletal maturity stages, or skeletal malocclusion (P > .05). However, approximately 90% of ponticulus posticus occurred before and after the circumpubertal stage. CONCLUSIONS: Ponticulus posticus should be expected mainly during childhood and the pubertal age. This may support the theory of a genetic cause of this vertebral anomaly.

The effects of a common stainless steel orthodontic bracket on the diagnostic quality of cranial and cervical 3T- MR images: a prospective, case-control study.

OBJECTIVES: To evaluate the effect of orthodontic stainless steel brackets and two different types of archwires on the diagnostic quality of 3-T MR images. METHODS: This prospective, case-control study was conducted following Strengthening the Reporting of Observational Studies in Epidemiology guidelines. The recruitment was conducted among orthodontic patients. 80 subjects, requiring MRI for the presence of temporomandibular disorders, were enrolled and divided into four groups: 20 patients using aligners (control group); 20 patients with stainless steel brackets without archwires; 20 patients with stainless steel brackets and nickel-titanium archwires; and 20 patients with stainless steel brackets and stainless steel archwires. Two experts in neuroradiology evaluated the images to determine the amount of distortion in 6 regions and 48 districts. A score was subjectively assigned according to a modified receiver operating characteristic method of distortion classification. Any disagreement was resolved through consensus seeking; when this was not possible, a third neuroradiologist was consulted. The following statistical methods were used: descriptive statistics, Cohen's kappa coefficient (k), Kruskal-Wallis test, pairwise comparisons using the Dunn-Bonferroni approach. The significance was set at p ≤ 0.05. RESULTS: The presence of stainless steel brackets with or without archwires negatively influenced MRI of the cervical region, paranasal sinuses, head and neck region, and cervical vertebrae but did not influence MRI of brain and temporomandibular joint regions. CONCLUSIONS: Patients with a stainless steel multibracket orthodontic appliance should remove it before cervical vertebrae, cervical region, paranasal sinuses, and head and neck MRI scans. The brain and temporomandibular joint region MRI should not require the removal of such appliances.

Dental anomalies and clinical features in patients with maxillary canine impaction.

OBJECTIVE: To analyze the prevalence, distribution, clinical features, and relationship with dental anomalies of maxillary canine impaction. MATERIALS AND METHODS: The complete pretreatment records of 1674 orthodontic patients were examined. Subjects with maxillary impacted canines were divided into two study groups: a palatally displaced canine (PDC) group (114 patients) and a buccally displaced canine (BDC) group (37 patients). These were compared to a control group of 151 patients who were randomly selected from the initial sample without maxillary canine impaction. The significance of associations between canine impaction and dental and clinical features and anomalies was examined with the chi-square test. RESULTS: PDC patients presented with normal overjet and facial profile and a lower degree of dental arch crowding in comparison to the control patients. PDC patients showed a higher prevalence of impaction of other teeth, dental aplasia, transposition, and peg-shaped maxillary lateral incisors (odds ratios 3.3, 2.6, 8.3, and 5.8, respectively). CONCLUSION: PDC was frequently the only orthodontic problem of patients. BDC group patients did not present with notable differences in clinical and dental features or dental anomalies compared to control subjects.

Localization of impacted maxillary canines using cone beam computed tomography. Review of the literature.

This review analyzed the literature focused on Cone- Beam Computed Tomography (CBCT) diagnostic accuracy and efficacy in detecting impacted maxillary canines, and evaluated the possible advantages in using CBCT technique compared with traditional radiographs. PubMed and Embase searches were performed selecting papers since 1998 up to September 2011, moreover reference lists were hand searched. Two reviewers selected relevant publications on the basis of predetermined inclusion criteria. The literature search yielded 94 titles, of which 5 were included in the review. Three studies used CBCT technique to 3D localize maxillary impacted canines and assess root resorption of adjacent teeth. Other two publications compared traditional radiographs with CBCT images in the diagnosis of maxillary impacted canines. Only three studies presented the results using statistical analysis. The present review highlighted that the use of CBCT has a potential diagnostic effect and may influence the outcome of treatment when compared with traditional panoramic radiography for the assessment of impacted maxillary canines. Furthermore it underlines the need of future studies performed according with high level methodological standards, investigating diagnostic accuracy and effectiveness of CBCT in the diagnosis of maxillary impacted teeth.

Condyle fossa relationship associated with functional posterior crossbite, before and after rapid maxillary expansion.

OBJECTIVE: To investigate condylar symmetry and condyle fossa relationships in subjects with functional posterior crossbite comparing findings before and after rapid maxillary expansion (RME) treatment through low-dose computed tomography (CT). MATERIALS AND METHODS: Twenty-six patients (14 girls and 12 boys, mean age 9.6 ± 1.4 years) with functional posterior crossbite (FPXB) diagnosis underwent rapid palatal expansion with a Hyrax appliance. Patients' temporomandibular joints (TMJ) underwent multislice CT scans before rapid palatal expansion (T0) and after (T1). Joint spaces were compared with those of a control sample of 13 subjects (7 girls and 5 boys, mean age 11 ± 0.6 years). RESULTS: Anterior space (AS), superior space (SS), and posterior space (PS) joint space measurements at T0 between the FPXB side and contralateral side demonstrated no statistically significant differences. After RME treatment (T1), all three joint spaces increased on both the FPXB side and the non-crossbite side. However, differences were statistically significant only for the SS when comparing the two sides at T1. SS increased more than AS and PS in the non-crossbite condyle (0.28 mm) and FPXB condyle (0.37 mm), and PS increased only on the FPXB side (0.34 mm). CONCLUSIONS: There were no statistically significant differences in condyle position within the glenoid fossa between the FPXB and non-crossbite side before treatment. Increases in joint spaces were observed after treatment with RME on both sides. These changes were, however, of small amounts.

3D cephalometric analysis obtained from computed tomography. Review of the literature.

INTRODUCTION: The aim of this systematic review is to estimate accuracy and reproducibility of craniometric measurements and reliability of landmarks identified with computed tomography (CT) techniques in 3D cephalometric analysis. METHODS: Computerized and manual searches were conducted up to 2011 for studies that addressed these objectives. The selection criteria were: (1) the use of human specimen; (2) the comparison between 2D and 3D cephalometric analysis; (3) the assessment of accuracy, reproducibility of measurements and reliability of landmark identification with CT images compared with two-dimensional conventional radiographs. The Cochrane Handbook for Systematic Reviews of Interventions was used as the guideline for this article. RESULTS: Twenty-seven articles met the inclusion criteria. Most of them demonstrated high measurements accuracy and reproducibility, and landmarks reliability, but their cephalometric analysis methodology varied widely. CONCLUSION: These differencies among the studies in making measurements don't permit a direct comparison between them. The future developments in the knowledge of these techniques should provide a standardized method to conduct the 3D CT cephalometric analysis.