RESUMO
Light-driven carboxylation offers a promising approach for synthesizing valuable fine chemicals under mild conditions. Here we disclose a heterogeneous photocatalytic strategy of C(sp2)-H activation of formate for hydrocarboxylation of alkenes over zinc indium sulfide (ZnIn2S4) under visible light. This protocol functions well with a variety of substituted styrenes with good to excellent yields; it also works for unactivated alkenes albeit with lower yields. Mechanistic studies confirm the existence of CO2â - as a key intermediate. It was found that C(sp2)-H activation of formate is induced by Sâ species on the surface of ZnIn2S4 via hydrogen atom transfer (HAT) instead of a photogenerated hole oxidation mechanism. Moreover, both cleavage of the C(sp2)-H of HCOO- and formation of a benzylic anion were found to be involved in the rate-determining step for the hydrocarboxylation of styrene.
RESUMO
Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.
RESUMO
Carbonylation of ethanol with CO2 as carbonyl source into value-added esters is of considerable significance and interest, while remains of great challenge due to the harsh conditions for activation of inert CO2 in that the harsh conditions result in undesired activation of α-C-H and even cleavage of C-C bond in ethanol to deteriorate the specific activation of O-H bond. Herein, we propose a photo-thermal cooperative strategy for carbonylation of ethanol with CO2 , in which CO2 is activated to reactive CO via photo-catalysis with the assistance of *H from thermally-catalyzed dissociation of alcoholic O-H bond. To achieve this proposal, an interfacial site and oxygen vacancy both abundant SrTiCuO3-x supported Cu2 O (Cu2 O-SrTiCuO3-x ) has been designed. A production of up to 320â µmol g-1 h-1 for ethyl formate with a selectivity of 85.6 % to targeted alcoholic O-H activation has been afforded in photo-thermal assisted gas-solid process under 3.29â W cm-1 of UV/Vis light irradiation (144 °C) and 0.2â MPa CO2 . In the photo-driven activation of CO2 and following carbonylation, CO2 activation energy decreases to 12.6â kJ mol-1 , and the cleavage of alcoholic α-C-H bond has been suppressed.
RESUMO
Dry reforming of methane (DRM) has provided an effective avenue to convert two greenhouse gases, CH4 and CO2 , into syngas. Here, we design a DRM photocatalyst Rh/Cex WO3 that invokes both photothermal and photoelectric processes, which overcomes the thermodynamic limitation of DRM under conventional conditions. In contrast to plasmonic or UV-response photocatalysts, our photocatalyst produces a superior light-to-chemical energy efficiency (LTCEE) of 4.65 % with a moderate light intensity. We propose that a light-induced metal-to-metal charge transfer plays a crucial role in the DRM reaction, which induces a redox looping between Ce to W species to lower the activation energy. Quantum mechanical studies reveal that a high oxygen mobility of Cex WO3 , accompanied with the formation of oxo-bridge species, results in a substantial elimination of deposited C species during the reaction. Our catalyst design strategy could offer a promising energy-efficient industrial process for DRM.
RESUMO
Splitting of alcohols into hydrogen and corresponding carbonyl compounds has potential applications in hydrogen production and chemical industry. Herein, we report that a heterogeneous photocatalyst (Ni-modified CdS nanoparticles) could efficiently split alcohols into hydrogen and corresponding aldehydes or ketones in a stoichiometric manner under visible light irradiation. Optimized apparent quantum yields of 38%, 46%, and 48% were obtained at 447 nm for dehydrogenation of methanol, ethanol, and 2-propanol, respectively. In the case of dehydrogenation of 2-propanol, a turnover number of greater than 44â¯000 was achieved. To our knowledge, these are unprecedented values for photocatalytic splitting of liquid alcohols under visible light to date. Besides, the current catalyst system functions well with other aliphatic and aromatic alcohols, affording the corresponding carbonyl compounds with good to excellent conversion and outstanding selectivity. Moreover, mechanistic investigations suggest that an interface between Ni nanocrystal and CdS plays a key role in the reaction mechanism of the photocatalytic splitting of alcohol.
RESUMO
Li-containing alloys and metallic deposits offer substantial Li+ storage capacities as alternative anodes to commercial graphite. However, the thermodynamically in sequence, yet kinetically competitive mechanism between Li solubility in the solid solution and intermediate alloy-induced Li deposition remains debated, particularly across the multiple scales. The elucidation of the mechanism is rather challenging due to the dynamic alloy evolution upon the non-equilibrium, transient lithiation processes under coupled physical fields. Here, influential factors governing Li solubility in the Li-Zn alloy are comprehensively investigated as a demonstrative model, spanning from the bulk electrolyte solution to the ion diffusion within the electrode. Through real-time phase tracking and spatial distribution analysis of intermediate alloy/Li metallic species at varied temperatures, current densities and particle sizes, the driving force of Li solubility and metallic plating along the Li migration pathway are probed in-depth. This study investigates the correlation between kinetics (pronounced concentration polarization, miscibility gap in lattice grains) and rate-limiting interfacial charge transfer thermodynamics in dedicating the Li diffusion into the solid solution. Additionally, the lithiophilic alloy sites with the balanced diffusion barrier and Li adsorption energy are explored to favor the homogeneous metal plating, which provides new insights for the rational innovation of high-capacity alloy/metallic anodes.
RESUMO
The semiconductor based photocatalysis has become a hot spot of current research, and the key challenges are the construction of strong functional heterojunction photocatalysts, and insights on the working mechanism involved. In this work, we constructed a NiFe- LDHs/P-TCN heterojunction with P-dopant defects and interface synergy and elucidated its mesoscale mechanism among different constituent interfaces. The interface photoelectron transfer was detected by PAS, EPR and other methods, and the enhancing mechanism of the defect sites for interface electron transfer and photocatalytic activity was proposed. The interfacial electrons, photoelectric properties and photocatalytic activity are found to be positively correlated. The result is conducive for a better understanding on working mechanism of heterogeneous photocatalysts, which opened a broader research space for the rational design and construction of functional interfaces.
Assuntos
Elétrons , Semicondutores , Catálise , Transporte de Elétrons , FenóisRESUMO
The chemical bond diversity and flexible reactivity of biomass-derived ethanol make it a vital feedstock for the production of value-added chemicals but result in low conversion selectivity. Herein, composite catalysts comprising SiO2-coated single- or multiparticle Au cores hybridized with TiO2 nanoparticles (mono- or multi-Au@SiO2/TiO2, respectively) were fabricated via electrostatic self-assembly. The C-H and O-H bonds of ethanol were selectively activated (by SiO2 and TiO2, respectively) under irradiation to form CH3CHâ¢(OH) or CH3CH2O⢠radicals, respectively. The formation and depletion kinetics of these radicals was analyzed by electron spin resonance to reveal marked differences between mono- and multi-Au@SiO2/TiO2. Consequently, the selectivity of these catalysts for 1,1-diethoxyethane after 6 h irradiation was determined as 81 and 99%, respectively, which was attributed to the more pronounced effect of localized surface plasmon resonance for multi-Au@SiO2/TiO2. Notably, only acetaldehyde was formed on a Au/TiO2 catalyst without a SiO2 shell. Fourier transform infrared (FTIR) spectroscopy indicated that the C-H adsorption of ethanol was enhanced in the case of multi-Au@SiO2/TiO2, while NH3 temperature-programmed desorption and pyridine adsorption FTIR spectroscopy revealed that multi-Au@SiO2/TiO2 exhibited enhanced surface acidity. Collectively, the results of experimental and theoretical analyses indicated that the adsorption of acetaldehyde on multi-Au@SiO2/TiO2 was stronger than that on Au/TiO2, which resulted in the oxidative coupling of ethanol to afford 1,1-diethoxyethane on the former and the dehydrogenation of ethanol to acetaldehyde on the latter.
RESUMO
Splitting of alcohols into hydrogen and corresponding carbonyl compounds, also called acceptorless alcohol dehydrogenation, is of great significance for both synthetic chemistry and hydrogen production. Light-Driven Alcohol Splitting (LDAS) by heterogeneous photocatalysis is a promising route to achieve such transformations, and it possesses advantages including high selectivity of the carbonyl compounds, extremely mild reaction conditions (room temperature and irradiation of visible light) and easy separation of the photocatalysts from the reaction mixtures. Because a variety of alcohols can be derived from biomass, LDAS can also be regarded as one of the most sustainable approaches for hydrogen production. In this Review, recent advances in the LDAS catalyzed by the heterogeneous photocatalysts are summarized, focusing on the mechanistic insights for the LDAS and aspects that influence the performance of the photocatalysts from viewpoints of metallic co-catalysts, semiconductors, and metal/semiconductor interfaces. In addition, challenges and prospects have been discussed in order to present a complete picture of this field.
RESUMO
Conventional semiconductor photocatalysis based on band-edge absorption remains inefficient due to the limited harvesting of solar irradiation and the complicated surface/interface chemistry. Herein, novel photothermal-enhanced catalysis was achieved in a core-shell hierarchical Cu7S4 nano-heater@ZIF-8 heterostructures via near-infrared localized surface plasmon resonance. Our results demonstrated that both the high surface temperature of the photothermal Cu7S4 core and the close-adjacency of catalytic ZIF-8 shell contributed to the extremely enhanced catalytic activity. Under laser irradiation (1450 nm, 500 mW), the cyclocondensation reaction rate increased 4.5-5.4 fold compared to that of the process at room temperature, in which the 1.6-1.8 fold enhancement was due to the localized heating effect. The simulated sunlight experiments showed a photothermal activation efficiency (PTAE) of 0.07%, further indicating the validity of photothermal catalysis based on the plasmonic semiconductor nanomaterials. More generally, this approach provides a platform to improve reaction activity with efficient utilization of solar energy, which can be readily extended to other green-chemistry processes.
RESUMO
Mass production of high-quality graphene flakes is important for commercial applications. Graphene microsheets have been produced on an industrial scale by chemical and liquid-phase exfoliation of graphite. However, strong-interaction-induced interlayer aggregation usually leads to the degradation of their intrinsic properties. Moreover, the crystallinity or layer-thickness controllability is not so perfect to fulfill the requirement for advanced technologies. Herein, we report a quartz-powder-derived chemical vapor deposition growth of three-dimensional (3D) high-quality graphene flakes and demonstrate the fabrication and application of graphene/g-C3N4 composites. The graphene flakes obtained after the removal of growth substrates exhibit the 3D curved microstructure, controllable layer thickness, good crystallinity, as well as weak interlayer interactions suitable for preventing the interlayer stacking. Benefiting from this, we achieved the direct synthesis of g-C3N4 on purified graphene flakes to form the uniform graphene/g-C3N4 composite, which provides efficient electron transfer interfaces to boost its catalytic oxidation activity of cycloalkane with relatively high yield, good selectivity, and reliable stability.