Different bioavailability of phenanthrene to two bacterial species and effects of trehalose lipids on the bioavailability.

Effects of trehalose lipids produced from Rhodococcus erythropolis ATCC 4277 on phenanthrene (PHE) mineralization by two soil microorganisms were investigated. Biodegradation experiments were conducted, with and without the biosurfactant, in three batch systems: water, soil, and soil-water slurry. PHE sorption to the soil did not limit the mineralization by the test microorganisms, Pseudomonas strain R (PR) and Sphingomonas sp. strain P5-2 (SP5-2). Both microorganisms, however, demonstrated significant difference in the PHE mineralization capability in the systems. While SP5-2 mineralized PHE faster than PR in liquid culture, PR having more hydrophobic surface greatly exceeded SP5-2 in ability to access soil-sorbed PHE. While the addition of the biosurfactant little affected the apparent cell hydrophobicity of SP5-2, it substantially improved PHE mineralization by this strain in all systems tested. Contrary to SP5-2, the apparent cell hydrophobicity was significantly stimulated with increasing concentration of the biosurfactant for PR. However, the biosurfactant had no significant effect on PHE mineralization by this microorganism. The results demonstrated that the addition of the biosurfactant may have great potential for remediation of sites contaminated with polycyclic aromatic hydrocarbons but its effects and benefits may be dependent on characteristics of microorganisms involved and environmental conditions.

Biochars derived from wasted marine macro-algae (Saccharina japonica and Sargassum fusiforme) and their potential for heavy metal removal in aqueous solution.

For the purpose of reusing wasted marine macro-algae generated during cultivation, harvesting, processing and selling processes, biochars derived from Saccharina japonica (known as kelp) and Sargassum fusiforme (known as hijikia) were characterized and their removal capacities for Cu, Cd, and Zn in aqueous solution were assessed. Feedstocks, S. japonica, S. fusiforme, and also pinewood sawdust as a control, were pyrolyzed at 250, 400, 500, 600 and 700 °C. In evaluating heavy metal removal capacities, SJB (S. japonica biochar) showed the best performance, with removal efficiencies of more than 98% for the three heavy metals when pyrolyzed at over 400 °C. SFB (S. fusiforme biochar) also showed good potential as an adsorbent, with removal efficiencies for the three heavy metals of more than 86% when pyrolyzed at over 500 °C. On the contrary, the maximum removal efficiencies of PSB (pinewood sawdust biochar) were 81%, 46%, and 47% for Cu, Cd, and Zn, respectively, even at 700 °C, the highest pyrolysis temperature. This demonstrates that marine macro-algae were advantageous in terms of production energy for removing heavy metals even at relatively low pyrolysis temperatures, compared with PSB. The excellent heavy metal adsorption capacities of marine macro-algae biochars were considered due to their higher pH and more oxygen-containing functional groups, although the specific surface areas of SJB and SFB were significantly lower than that of PSB. This research confirmed that the use of marine macro-algae as a heavy metal adsorbent was suitable not only in the removal of heavy metals, but also in terms of resource recycling and energy efficiency.

Development of functional composts using spent coffee grounds, poultry manure and biochar through microbial bioaugmentation.

Spent coffee grounds (SCG), poultry manure, and agricultural waste-derived biochar were used to manufacture functional composts through microbial bioaugmentation. The highest yield of tomato stalk-based biochar (40.7%) was obtained at 450°C with a surface area of 2.35 m2 g-1. Four pilot-scale composting reactors were established to perform composting for 45 days. The ratios of NH4+-N/NO3--N, which served as an indicator of compost maturity, indicate rapid, and successful composting via microbial bioaugmentation and biochar amendment. Moreover, germination indices for radish also increased by 14-34% through augmentation and biochar amendment. Microbial diversity was also enhanced in the augmented and biochar-amended composts by 7.1-8.9%, where two species of Sphingobacteriaceae were dominant (29-43%). The scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH) were enhanced by 14.1% and 8.6% in the fruits of pepper plants grown in the presence of the TR-2 (augmentation applied only) and TR-3 (both augmentation and biochar amendment applied) composts, respectively. Total phenolic content was also enhanced by 68% in the fruits of the crops grown in TR-3. Moreover, the other compost, TR-L (augmentation applied only), boosted DPPH scavenging activity by 111% in leeks compared with commercial organic fertilizer, while TR-3 increased the phenolic content by 44.8%. Composting facilitated by microbial augmentation and biochar amendment shortened the composting time and enhanced the quality of the functional compost. These results indicate that functional compost has great potential to compete with commercially available organic fertilizers and that the novel composting technology could significantly contribute to the eco-friendly recycling of organic wastes such as spent coffee grounds, poultry manure, and agricultural wastes.

Effects of biosurfactant-producing bacteria on biodegradation and transport of phenanthrene in subsurface soil.

This study investigated the effects of surfactant-producing microorganism, Pseudomonas aeruginosa ATCC 9027, on phenanthrene (PHE) biodegradation by two different PHE-degrading bacteria (Isolate P5-2 and Pseudomonas strain R) in soil. Phenanthrene mineralization experiments were conducted with soils inoculated with one of PHE-degraders and/or the surfactant-producer. Influence of co-inoculation with the surfactant-producing bacteria on phenanthrene transport and biodegradation was also examined in soil columns. P. strain R mineralized phenanthrene faster and to a greater extent than Isolate P5-2 in the test soil. Co-inoculation with the surfactant-producing bacteria significantly enhanced phenanthrene biodegradation by P. strain R but it did not affect the biodegradation by Isolate P5-2 in both batch and column systems. Production of biosurfactants by P. aeruginosa ATCC 9027 was negligible under the given conditions. This study demonstrated that bioaugmentation with surfactant-producing bacteria could enhance in situ bioremediation of soils contaminated with polycyclic aromatic hydrocarbons (PAHs) and the beneficial effect of the bioaugmentation depended on types of PAH-degrading microorganisms present.

An eco-friendly treatment of tannery wastewater using bioaugmentation with a novel microbial consortium.

A novel microbial consortium (BM-S-1) enriched from natural soils was successfully used to treat tannery wastewater from leather manufacturing industries in Korea on a pilot scale. The objective of this study was to determine whether augmentation with a novel microbial consortium BM-S-1could successfully treat the recalcitrant wastewater without chemical pre-treatment in a tannery wastewater treatment system. Chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) were monitored for water quality. The microbial population dynamics were analyzed using pyrosequencing, and denitrifying bacteria were quantified using real-time PCR (RT-PCR). The removal efficiencies for COD, TN and TP were greater than 91%, 79%, and 90%, respectively. The dominant phyla in the buffering tank (B), primary aeration (PA), secondary aeration (SA) and sludge digestion tank (SD) were Proteobacteria, Firmicutes, Bacteroidetes, Planctomycetes and Deinococcus-Thermus. Cluster analysis based on the UniFrac distance of the species in the different stages showed that the PA is similar to the SA, whereas the B is similar to the SD. qPCR of the nosZ genes showed the highest abundance of denitrifiers in B, which was increased 734-fold compared to the influent (I). It was hypothesized that anaerobic denitrifiers and the diverse microbial community may play important roles in the biological treatment of tannery wastewater. This technology may also contribute to the full-scale treatment of industrial wastewater containing food processing wastewater and marine sediment with high organic content.

Heavy metal removal from aqueous solutions using engineered magnetic biochars derived from waste marine macro-algal biomass.

Despite the excellent sorption ability of biochar for heavy metals, it is difficult to separate and reuse after adsorption when applied to wastewater treatment process. To overcome these drawbacks, we developed an engineered magnetic biochar by pyrolyzing waste marine macro-algae as a feedstock, and we doped iron oxide particles (e.g., magnetite, maghemite) to impart magnetism. The physicochemical characteristics and adsorption properties of the biochar were evaluated. When compared to conventional pinewood sawdust biochar, the waste marine algae-based magnetic biochar exhibited a greater potential to remove heavy metals despite having a lower surface area (0.97m2/g for kelp magnetic biochar and 63.33m2/g for hijikia magnetic biochar). Although magnetic biochar could be effectively separated from the solution, however, the magnetization of the biochar partially reduced its heavy metal adsorption efficiency due to the biochar's surface pores becoming plugged with iron oxide particles. Therefore, it is vital to determine the optimum amount of iron doping that maximizes the biochar's separation without sacrificing its heavy metal adsorption efficiency. The optimum concentration of the iron loading solution for the magnetic biochar was determined to be 0.025-0.05mol/L. The magnetic biochar's heavy metal adsorption capability is considerably higher than that of other types of biochar reported previously. Further, it demonstrated a high selectivity for copper, showing two-fold greater removal (69.37mg/g for kelp magnetic biochar and 63.52mg/g for hijikia magnetic biochar) than zinc and cadmium. This high heavy metal removal performance can likely be attributed to the abundant presence of various oxygen-containing functional groups (COOH and OH) on the magnetic biochar, which serve as potential adsorption sites for heavy metals. The unique features of its high heavy metal removal performance and easy separation suggest that the magnetic algae biochar can potentially be applied in diverse areas that require biosorbents for pollutant removal.

Preparation of modified-biochar from Laminaria japonica: Simultaneous optimization of aluminum electrode-based electro-modification and pyrolysis processes and its application for phosphate removal.

The preparation conditions of electro-modification (current density) and pyrolysis (pyrolysis temperature and heating rate) processes were simultaneously optimized using response surface methodology with the quadratic regression model associated with Box-Behnken design. By numerical optimization, the phosphate adsorption capacity of 245.06mg/g was achieved, corresponding to 99.9% of the predicted values under statistically optimized conditions (current density: 38.78mA/cm(2), pyrolysis temperature: 584.1°C, heating rate: 6.91°C/min). By considering R(2) and three error functions values, the experimental results of adsorption kinetics, and the equilibrium isotherms at different temperatures (10-30°C) showed that predictive pseudo-second-order and Sips isotherm models could adequately interpret the phosphate adsorption process for 'statistically optimized electrically modified'-biochar (SOEM-biochar). The maximum phosphate adsorption capacities of SOEM-biochar were found to be 273.9, 345.1, and 460.3mg/g at 10, 20, and 30°C, respectively, which are higher than that of other adsorbents reported in the literature.

Alkylamine odors from degradation of flocculant polymers in sludges.

The cationic organic polymers used to enhance thickening and dewatering processes are potential sources of strong odors. These polymers vary in chemical structure, and some may be more susceptible to biotic or abiotic degradation than others. The product organic amines will be volatilized most noticeably at high pH, as in lime addition. These possibilities were examined using several structural types of polymers combined with anaerobically digested sludge. Two commonly used polymers gave significant production of trimethylamine (TMA), which was released upon lime addition. Their structures were correlated with reactions that yield TMA. An initial ester hydrolysis step appears to be biologically mediated, but subsequent steps can occur due to alkaline conditions. An alternative cationic polymer structure did not generate TMA but required a much higher dose to effect sufficient conditioning of the sludge. The acrylamide-based polymers were shown to be the predominant source of TMA in limed sludges.

Enhancement of phenanthrene solubilization and biodegradation by trehalose lipid biosurfactants.

Effects of trehalose lipid biosurfactants produced by Rhodococcus erythropolis on the solubilization and biodegradation of phenanthrene (PHE) were investigated. Based on surface tension measurements, the average critical micelle concentration (CMC) of trehalose lipids was determined to be approximately 16 mg total organic carbon (TOC)/L. In solubilization assays, the addition of biosurfactants at 20-fold the CMC increased the apparent solubility of PHE by more than 30-fold. Using a known PHE degrader (isolate P5-2), batch PHE biodegradation experiments were conducted, with and without trehalose lipids, in three systems: Water (devoid of soil solids), soil (Kenansville loamy sand having 0.72% organic matter), and soil-water slurry. Addition of trehalose lipids at 10-fold the CMC enhanced both the rate and the extent of PHE mineralization by isolate P5-2 in the liquid culture. The addition of biosurfactant (32.2 mg TOC/kg soil) to the soil system also increased both the initial rate (by more than twofold) and the extent of PHE mineralization. Biosurfactants increased the rate, but not the extent, of PHE mineralization in the soil-water slurry. The results obtained in the present study indicate that the trehalose lipid biosurfactants produced by R. erythropolis have good solubilization capacity for hydrophobic organic compounds and great potential for applications in bioremediation of sites contamination with polycyclic aromatic hydrocarbons.