Multislip-enabled morphing of all-inorganic perovskites.

All-inorganic lead halide perovskites (CsPbX3, X = Cl, Br or I) are becoming increasingly important for energy conversion and optoelectronics because of their outstanding performance and enhanced environmental stability. Morphing perovskites into specific shapes and geometries without damaging their intrinsic functional properties is attractive for designing devices and manufacturing. However, inorganic semiconductors are often intrinsically brittle at room temperature, except for some recently reported layered or van der Waals semiconductors. Here, by in situ compression, we demonstrate that single-crystal CsPbX3 micropillars can be substantially morphed into distinct shapes (cubic, L and Z shapes, rectangular arches and so on) without localized cleavage or cracks. Such exceptional plasticity is enabled by successive slips of partial dislocations on multiple [Formula: see text] systems, as evidenced by atomic-resolution transmission electron microscopy and first-principles and atomistic simulations. The optoelectronic performance and bandgap of the devices were unchanged. Thus, our results suggest that CsPbX3 perovskites, as potential deformable inorganic semiconductors, may have profound implications for the manufacture of advanced optoelectronics and energy systems.

Immune-stealth VP28-conjugated heparin nanoparticles for enhanced and reversible anticoagulation.

Heparins are a family of sulfated linear negatively charged polysaccharides that have been widely used for their anticoagulant, antithrombotic, antitumor, anti-inflammatory, and antiviral properties. Additionally, it has been used for acute cerebral infarction relief as well as other pharmacological actions. However, heparin's self-aggregated macrocomplex may reduce blood circulation time and induce life-threatening thrombocytopenia (HIT) complicating the use of heparins. Nonetheless, the conjugation of heparin to immuno-stealth biomolecules may overcome these obstacles. An immunostealth recombinant viral capsid protein (VP28) was expressed and conjugated with heparin to form a novel nanoparticle (VP28-heparin). VP28-heparin was characterized and tested to determine its immunogenicity, anticoagulation properties, effects on total platelet count, and risk of inducing HIT in animal models. The synthesized VP28-heparin trimeric nanoparticle was non-immunogenic, possessed an average hydrodynamic size (8.81 ± 0.58 nm) optimal for the evasion renal filtration and reticuloendothelial system uptake (hence prolonging circulating half-life). Additionally, VP28-heparin did not induce mouse death or reduce blood platelet count when administered at a high dosein vivo(hence reducing HIT risks). The VP28-heparin nanoparticle also exhibited superior anticoagulation properties (2.2× higher prothrombin time) and comparable activated partial thromboplastin time, but longer anticoagulation period when compared to unfractionated heparin. The anticoagulative effects of the VP28-heparin can also be reversed using protamine sulfate. Thus, VP28-heparin may be an effective and safe heparin derivative for therapeutic use.

Second Near-Infrared (NIR-II) Window for Imaging-Navigated Modulation of Brain Structure and Function.

For a long time, optical imaging of the deep brain with high resolution has been a challenge. Recently, with the advance in second near-infrared (NIR-II) bioimaging techniques and imaging contrast agents, NIR-II window bioimaging has attracted great attention to monitoring deeper biological or pathophysiological processes with high signal-to-noise ratio (SNR) and spatiotemporal resolution. Assisted with NIR-II bioimaging, the modulation of structure and function of brain is promising to be noninvasive and more precise. Herein, in this review, first the advantage of NIR-II light in brain imaging from the interaction between NIR-II and tissue is elaborated. Then, several specific NIR-II bioimaging technologies are introduced, including NIR-II fluorescence imaging, multiphoton fluorescence imaging, and photoacoustic imaging. Furthermore, the corresponding contrast agents are summarized. Next, the application of various NIR-II bioimaging technologies in visualizing the characteristics of cerebrovascular network and monitoring the changes of the pathology signals will be presented. After that, the modulation of brain structure and function based on NIR-II bioimaging will be discussed, including treatment of glioblastoma, guidance of cell transplantation, and neuromodulation. In the end, future perspectives that would help improve the clinical translation of NIR-II light are proposed.

In Situ Growth of Iron Sulfide on Fast Charge Transfer V2 C-MXene for Superior Sodium Storage Anodes.

Due to the upstream pressure of lithium resources, low-cost sodium-ion batteries (SIBs) have become the most potential candidates for energy storage systems in the new era. However, anode materials of SIBs have always been a major problem in their development. To address this, V2 C/Fe7 S8 @C composites with hierarchical structures prepared via an in situ synthesis method are proposed here. The 2D V2 C-MXene as the growth substrate for Fe7 S8  greatly improves the rate capability of SIBs, and the carbon layer on the surface provides a guarantee for charge-discharge stability. Unexpectedly, the V2 C/Fe7 S8 @C anode achieves satisfactory sodium storage capacity and exceptional rate performance (389.7 mAh g-1  at 5 A g-1 ). The sodium storage mechanism and origin of composites are thoroughly studied via ex situ characterization techniques and first-principles calculations. Furthermore, the constructed sodium-ion capacitor assembled with N-doped porous carbon delivers excellent energy density (135 Wh kg-1 ) and power density (11 kW kg-1 ), showing certain practical value. This work provides an advanced system of sodium storage anode materials and broadens the possibility of MXene-based materials in the energy storage.

In Situ Tracking of Crystal-Surface-Dependent Cu2O Nanoparticle Dissolution in an Aqueous Environment.

Metal-oxide-based nanoparticles (MONPs) such as Cu2O NPs have attracted growing attention, but the potential discharges of MONPs have raised considerable concern of their environmental fate including their dissolution behavior. The impacts of morphology on MONP dissolution are largely uncertain due to the lack of in situ tracking techniques. In this study, we combined a series of in situ technologies including liquid-cell transmission electron microscopy and fluorescence probes to reveal the in situ dissolution process of Cu2O NPs in freshwater. Our results suggest that cubic Cu2O NPs exhibit a higher dissolution quantity compared with spherical NPs of the same surface area. The difference was mainly related to the crystal surface, while other factors such as particle size or aggregation status showed minor effects. Importantly, we demonstrated the simultaneous growth of new small NPs and the dissolution of pristine Cu2O NPs during the dissolution of Cu2O NPs. Cubic Cu2O NPs became much less soluble under O2-limited conditions, suggesting that O2 concentration largely affected the dependence of dissolution on the NP morphology. Our findings highlight the potential application of in situ techniques to track the environmental fates of MONPs, which would provide important information for assessing the ecological risks of engineered NPs.

Driver mutations in ADGRL3 are involved in the evolution of ependymoma.

Although there have been recent advances in the molecular pathology of ependymomas, little is known about the underlying molecular evolution during its development. Here, we assessed the clinical, pathological and molecular evolutionary process of ependymoma recurrence in a 9-year-old patient who had seven recurrences of supratentorial ependymoma and died from intracranial multiregional recurrences at the age of 19 years old. Whole-genome sequencing (WGS) of 7 tumor samples (1 primary and 6 subsequent recurrent tumors) was performed to elucidate the mutation landscape and identify potential driver mutations for tumor evolution. The genetic profiles of the seven tumor specimens showed significant heterogeneity and suggested a highly branched evolutionary pattern. The mutational signatures and chromothripsis changed with treatments. Strikingly, adhesion G protein-coupled receptor L3 (ADGRL3, also known as Latrophilins 3, LPNH3) was found to be consistently mutated during the entire disease process. However, Sanger sequencing of other 78 ependymoma patients who underwent surgery at our institution showed no genetic alteration of ADGRL3, as found in the present case. The mRNA levels of ADGRL3 were significantly lower in ependymomas (n = 36), as compared with normal brain tissue (n = 3). Grade III ependymomas had the lowest ADGRL3 expression. Moreover, ependymomas with lower mRNA level of ADGRL3 had shorter overall survival. Our findings, therefore, demonstrate a rare evolutionary process of ependymoma involving ADGRL3.

[Correlations between content of linarin in Chrysanthemum indicum and climatic factors in habitats].

Chrysanthemi Indici Flos(CIF), the capitulum of Chrysanthemum indicum, is widely used in proprietary Chinese medicine and daily chemical products. At present, CIF is mainly produced from wild resources and rarely cultivated. This study aims to reveal the correlations between linarin content in CIF and climatic factors in different habitats, and provide a theoretical basis for suitable zoning and rational production of medicinal materials. The content of linarin in CIF was determined by HPLC. Grey relational analysis and Pearson correlation analysis were carried out for linarin content with climatic factors. The results showed that the content of linarin in CIF was significantly different among different habitats. The grey relational degrees of climatic factors with linarin content was in an order of average annual precipitation>annual average sunshine hours>annual average temperature>longitude>annual frost-free period>latitude>altitude. Longitude, annual average temperature and average annual precipitation had significantly positive correlations with the content of linarin in CIF, whereas latitude and altitude showed negative correlations with it. The annual frost-free period and annual average sunshine hours had no significant correlation with the content of linarin in CIF. The content of linarin in CIF varied significantly in different habitats. High longitude, low latitude, low altitude, high annual average temperature and high annual average precipitation could be used as indicators for the habitats of high-quality Ch. indicum. This study provides a reference for selecting suitable producing areas of Ch. indicum and establishing artificial cultivation system.

Dual antivascular function of human fibulin-3 variant, a potential new drug discovery strategy for glioblastoma.

The ECM protein EFEMP1 (fibulin-3) is associated with all types of solid tumor through its cell context-dependent dual function. A variant of fibulin-3 was engineered by truncation and mutation to alleviate its oncogenic function, specifically the proinvasive role in glioblastoma multiforme (GBM) cells at stem-like state. ZR30 is an in vitro synthesized 39-kDa protein of human fibulin-3 variant. It has a therapeutic effect in intracranial xenograft models of human GBM, through suppression of epidermal growth factor receptor/AKT and NOTCH1/AKT signaling in GBM cells and extracellular MMP2 activation. Glioblastoma multiforme is highly vascular, with leaky blood vessels formed by tumor cells expressing endothelial cell markers, including CD31. Here we studied GBM intracranial xenografts, 2 weeks after intratumoral injection of ZR30 or PBS, by CD31 immunohistochemistry. We found a 70% reduction of blood vessel density in ZR30-treated xenografts compared with that of PBS-treated ones. Matrigel plug assays showed the effect of ZR30 on suppressing angiogenesis. We further studied the effect of ZR30 on genes involved in endothelial transdifferentiation (ETD), in 7 primary cultures derived from 3 GBMs under different culture conditions. Two GBM cultures formed mesh structures with upregulation of ETD genes shortly after culture in Matrigel Matrix, and ZR30 suppressed both. ZR30 also downregulated ETD genes in two GBM cultures with high expression of these genes. In conclusion, multifaceted tumor suppression effects of human fibulin-3 variant include both suppression of angiogenesis and vasculogenic mimicry in GBM.

Skp2 modulates proliferation, senescence and tumorigenesis of glioma.

BACKGROUND: Gliomas represent the largest class of primary central nervous system neoplasms, many subtypes of which exhibit poor prognoses. Surgery followed by radiotherapy and chemotherapy has been used as a standard strategy but yielded unsatisfactory improvements in patient survival outcomes. The S-phase kinase protein 2 (Skp2), a critical component of the E3-ligase SCF complex, has been documented in tumorigenesis in various cancer types but its role in glioma has yet to be fully clarified. In this study, we investigated the function of Skp2 in the proliferation, stem cell maintenance, and drug sensitivity to temozolomide (TMZ) of glioma. METHODS: To investigate the role of Skp2 in the prognosis of patients with glioma, we first analyzed data in databases TCGA and GTEx. To further clarify the effect of Skp2 on glioma cell proliferation, we suppressed its level in glioblastoma (GBM) cell lines through knockdown and small molecule inhibitors (lovastatin and SZL-P1-41). We then detected cell growth, colony formation, sphere formation, drug sensitivity, and in vivo tumor formation in xenograft mice model. RESULTS: Skp2 mRNA level was higher in both low-grade glioma and GBM than normal brain tissues. The knockdown of Skp2 increased cell sensitivity to TMZ, decreased cell proliferation and tumorigenesis. In addition, Skp2 level was found increased upon stem cells enriching, while the knockdown of Skp2 led to reduced sphere numbers. Downregulation of Skp2 also induced senescence. Repurposing of lovastatin and novel compound SZL-P1-41 suppressed Skp2 effectively, and enhanced glioma cell sensitivity to TMZ in vitro and in vivo. CONCLUSION: Our data demonstrated that Skp2 modulated glioma cell proliferation in vitro and in vivo, stem cell maintenance, and cell sensitivity to TMZ, which indicated that Skp2 could be a potential target for long-term treatment.

Transferrin receptor 1 targeted optical imaging for identifying glioma margin in mouse models.

OBJECTIVE: Optical molecular imaging technology that indiscriminately detects intracranial glioblastoma (GBM) can help neurosurgeons effectively remove tumor masses. Transferrin receptor 1 (TfR 1) is a diagnostic and therapeutic target in GBM. A TfR 1-targeted peptide, CRTIGPSVC (CRT), was shown to cross the blood brain barrier (BBB) and accumulate at high levels in GBM tissues. In this study, we synthesized a TfR 1-targeted near-infrared fluorescent (NIRF) probe, Cy5-CRT, for identifying the GBM tissue margin in mouse models. METHODS: We initially confirmed the overexpression of TfR 1 in GBM and the tumor-specific homing ability of Cy5-CRT in subcutaneous and orthotopic GBM mouse models. We then examined the feasibility of Cy5-CRT for identifying the tumor margin in orthotopic GBM xenografts. Finally, we compared Cy5-CRT with the clinically used fluorescein sodium in identifying tumor margins. RESULTS: Cy5-CRT specifically accumulated in GBM tissues and detected the tumor burden with exceptional contrast in mice with orthotopic GBM, enabling fluorescence-guided GBM resection under NIRF live imaging conditions. Importantly, Cy5-CRT recognized the GBM tissue margin more clearly than fluorescein sodium. CONCLUSIONS: The TfR 1-targeted optical probe Cy5-CRT specifically differentiates tumor tissues from the surrounding normal brain with high sensitivity, indicating its potential application for the precise surgical removal of GBM.

Association Between Nitrite and Nitrate Intake and Risk of Gastric Cancer: A Systematic Review and Meta-Analysis.

BACKGROUND Studies have shown inconsistent associations of nitrite and nitrate intake with the risk of gastric cancer or its associated mortality. We performed a meta-analysis of observational studies to evaluate the correlation of nitrite and nitrate intake with the risk of gastric cancer. MATERIAL AND METHODS We searched for studies reporting effect estimates and 95% confidence intervals (CIs) of gastric cancer in PubMed, EMBASE, and the Cochrane Library through November 2018. The summary results of the included studies were pooled using a random-effects model. RESULTS Eighteen case-control and 6 prospective cohort studies recruiting 800 321 participants were included in this study. The summary results indicated that the highest (odds ratio [OR], 1.27; 95%CI, 1.03-1.55; P=0.022) or moderate (OR: 1.12; 95%CI, 1.01-1.26; P=0.037) nitrite intake were associated with a higher risk of gastric cancer. However, we noted that high (OR, 0.81; 95%CI, 0.68-0.97; P=0.021) or moderate (OR, 0.86; 95%CI, 0.75-0.99; P=0.036) nitrate intakes were associated with a reduced risk of gastric cancer. These associations differed when stratified by publication year, study design, country, the percentage of male participants, assessment of exposure, adjusted model, and study quality. CONCLUSIONS High or moderate nitrite intake was associated with higher risk of gastric cancer, whereas high or moderate nitrate intake was correlated with lower risk of gastric cancer.

Nitrogen-doped carbon nanodots prepared from polyethylenimine for fluorometric determination of salivary uric acid.

Stable and low-cost carbon dots (C-dots) were prepared from polyethylenimine (PEI) by a hydrothermal method. It is found that the fluorescence of the C-dots (best measured at excitation/emission wavelengths of 365/473 nm) is quenched by selective oxidation of surface PEI by periodate but recovers in the presence of uric acid (UA). It is assumed that this is due to the selective reduction of the nitrone groups to hydroxylamine groups by UA. The findings were used to design a fluorometric method for determination of UA that has a 2.3 nM detection limit. This is lower than that of reported fluorometric and enzymatic assays. The performance of the method has been validated by determination of UA in samples of human saliva. It is found that the results agree well with those obtained by a commercial UA assay. Graphical abstract Schematic presentation of the polyethylenimine (PEI) carbon nanodots (C-dots) as a fluorescent probe for uric acid. Their fluorescence is quenched by periodate (IO4-) due to oxidative formation of nitrone groups, an subsequently restored due to reduction by uric acid (UA).

[Application of ITS2 secondary structure phylogenetic information in DNA barcode identification of Chrysanthemum indicum and its related plants].

By exploring additional phylogenetic information hidden in ITS2 secondary structure,the possibility of identifying Chrysanthemum indicum and its related species with DNA barcode of ITS2 nucleic acid sequence and its structure information were discussed.The genomic DNA was extracted from 12 samples. The ITS2 fragments were amplified by PCR and sequenced bidirectionally to obtain ITS2 sequence information. 28 sequences of related species for Ch. indicum were downloaded from Gen Bank. Until all 40 ITS2 sequences were aligned,ITS2 secondary structure prediction and structure comparison were finished. Then ITS2 secondary structure information was coded. After comparing ITS2 structure information and nucleic acid information,MP phylogenetic trees were built. The results showed that the secondary structures of ITS2 shared the same structure model--a four-fingered hand. They not only have the common characteristics of ITS2 secondary structures in plants,but also have many other conservative sequences,and their overall conservativeness is high. Among all species used in this study,their ITS2 secondary structures had obvious difference. In addition,the number of mutation sites in the joint matrix compared with the nucleic acid sequences increased by nearly 90%,which greatly enriched the number of mutation sites. This method of information analysis distinguished Ch. indicum from its related species. At the same time,the support rate of the branches of evolutionary trees and the identification rate of species were significantly improved. Although there was no distinction between Ch. zawadskii and Ch. morifolium,it effectively distinguished the three species,namely,Ch. hypargyrum,Ch.oreastrum,and Ch. dichrum. Therefore,the authors suggest that the ITS2 sequence combined with its structural data information should be applied to the identification of Ch. indicum and its related species,and be widely applied to DNA barcode research.

[Identification of Chrysanthemum indicum in different geographical populations and Ch. morifolium based on DNA barcodes of psbA-trnH,matK and trnL].

DNA barcode technology was used to establish a rapid identification method of Chrysanthemum indicum and Ch. morifolium based on psbA-trn H,mat K and trn L sequences. The total DNA was extracted from 21 samples collected,and the psbA-trn H,mat K,trn L sequences were amplified by PCR and sequenced. The information of these sequences were obtained. We aligned all 63 sequences,calculated the intraspecific and interspecific distances,analysed the SNPs distribution of psbA-trn H+mat K+trn L combination sequences and constructed the Neighbor-joining( NJ) Tree,using MEGA 7. 0. The results showed that the genetic distances of Ch. indicum,Ch. indicum( Juhuanao)and Ch. morifolium were overlapped. The SNPs analysis of psbA-trn H+mat K+trn L combination sequences showed that there were 19 nucleotide polymorphism loci( SNPs) and nine parsim-informative sites in the combination sequences. In addition,Ch. indicum showed more obvious sequence polymorphism than those of Ch. indicum( Juhuanao) and Ch. morifolium. The psbA-trn H sequences showed obvious length variation.The NJ Tree showed that Ch. morifolium numbered C2-C5 were clustered into a single subbranch with a bootstrap value of 62%,and Ch.morifolium could be distinguished from Ch. indicum and Ch. indicum( Juhuanao). Moreover,Ch. indicum numbered Z9 and Z10 collected from Gansu province were singly clustered into one branch with a bootstrap value of 77%. It was also found that the changes of psbA-trn H and trn L sequences information of Ch. indicum samples from the northwest were obviously related to the geography and environment. Moreover,Ch.indicum and Ch. indicum( Juhuanao) had obvious differentiation,were also regarded as the evolutionary sources of Ch. morifolium. Therefore,psbA-trn H+mat K+trn L combination sequences as DNA barcode can identify Ch. indicum and Ch. morifolium accurately and rapidly,which provides an important basis for germplasm resources identification and species identification.

[Identification of Chrysanthemum indicum and its adulterants based on ITS2 barcode].

DNA barcode technology was used to establish a rapid identification method of Chrysanthemum indicum based on ITS2 sequences. The total DNA was extracted from 22 collected samples,and the ITS2 sequence was amplified by PCR and sequenced,and the information of ITS2 sequence was obtained. Another 14 items of the same family or the same genus were downloaded from Gen Bank.We aligned all 36 sequences,calculated the intraspecific and interspecific distances,and constructed Neighbor Joining( NJ) phylogenetic tree,using MEGA 7. 0. The difference of the secondary structure between the ITS2 sequences was compared. The results showed that the genetic distance of Ch. indicum and Ch. morifolium was overlapped,but the maximum intraspecific distance was far less than the minimum interspecific distance between and among Ch. indicum and other species,with an obvious barcoding gap. The NJ tree showed that Ch. indicum and Ch. morifolium shared a clade,and most of Ch. morifolium with some Ch. indicum were shared a subclade,while Inula lineariifolia,Sinosenecio oldhamianus and Senecio scandens belonged to one clade separately. ITS2 secondary structures for I. lineariifolia,S. oldhamianus and S. scandens were significantly different enough to identify completely but Ch. indicum and Ch. morifolium shared two secondary structures of A and B. It was proved that Ch. indicum was one of the evolutionary sources of Ch.morifolium. Therefore ITS2 sequence as DNA barcode can identify Ch. indicum and its adulterants accurately and quickly. The study provides an important basis for Ch. indicum for the identification of germplasm resources and the safety of clinical medication.

'Big Bang' tomography as a new route to atomic-resolution electron tomography.

Until now it has not been possible to image at atomic resolution using classical electron tomographic methods, except when the target is a perfectly crystalline nano-object imaged along a few zone axes. The main reasons are that mechanical tilting in an electron microscope with sub-ångström precision over a very large angular range is difficult, that many real-life objects such as dielectric layers in microelectronic devices impose geometrical constraints and that many radiation-sensitive objects such as proteins limit the total electron dose. Hence, there is a need for a new tomographic scheme that is able to deduce three-dimensional information from only one or a few projections. Here we present an electron tomographic method that can be used to determine, from only one viewing direction and with sub-ångström precision, both the position of individual atoms in the plane of observation and their vertical position. The concept is based on the fact that an experimentally reconstructed exit wave consists of the superposition of the spherical waves that have been scattered by the individual atoms of the object. Furthermore, the phase of a Fourier component of a spherical wave increases with the distance of propagation at a known 'phase speed'. If we assume that an atom is a point-like object, the relationship between the phase and the phase speed of each Fourier component is linear, and the distance between the atom and the plane of observation can therefore be determined by linear fitting. This picture has similarities with Big Bang cosmology, in which the Universe expands from a point-like origin such that the distance of any galaxy from the origin is linearly proportional to the speed at which it moves away from the origin (Hubble expansion). The proof of concept of the method has been demonstrated experimentally for graphene with a two-layer structure and it will work optimally for similar layered materials, such as boron nitride and molybdenum disulphide.

Fabrication and Characterization of a High-Performance Multi-Annular Backscattered Electron Detector for Desktop SEM.

Scanning electron microscopy has been developed for topographic analysis at the nanometer scale. Herein, we present a silicon p-n diode with multi-annular configuration to detect backscattering electrons (BSE) in a homemade desktop scanning electron microscope (SEM). The multi-annular configuration enables the enhancement of the topography contrast of 82.11 nA/µm as compared with the commercial multi-fan-shaped BSE detector of 40.08 nA/µm. Additionally, we integrated it with lateral p-n junction processing and aluminum grid structure to increase the sensitivity and efficiency of the multi-annular BSE detector that gives higher sensitivity of atomic number contrast and better surface topography contrast of BSE images for low-energy detection. The responsivity data also shows that MA-AL and MA p-n detectors have higher gain value than the MA detector does. The standard deviation of measurements is no higher than 1%. These results verify that MA p-n and MA-AL detectors are stable and can function well in SEM for low-energy applications. It is demonstrated that the multi-annular (MA) detectors are well suited for imaging in SEM systems.

Fe-vacancy order and superconductivity in tetragonal ß-Fe1-xSe.

Several superconducting transition temperatures in the range of 30-46 K were reported in the recently discovered intercalated FeSe system (A1-xFe2-ySe2, A = K, Rb, Cs, Tl). Although the superconducting phases were not yet conclusively decided, more than one magnetic phase with particular orders of iron vacancy and/or potassium vacancy were identified, and some were argued to be the parent phase. Here we show the discovery of the presence and ordering of iron vacancy in nonintercalated FeSe (PbO-type tetragonal ß-Fe1-xSe). Three types of iron-vacancy order were found through analytical electron microscopy, and one was identified to be nonsuperconducting and magnetic at low temperature. This discovery suggests that the rich-phases found in A1-xFe2-ySe2 are not exclusive in Fe-Se and related superconductors. In addition, the magnetic ß-Fe1-xSe phases with particular iron-vacancy orders are more likely to be the parent phase of the FeSe superconducting system instead of the previously assigned ß-Fe1+δTe.

MiR-181b sensitizes glioma cells to teniposide by targeting MDM2.

BACKGROUND: Although the incidence of glioma is relatively low, it is the most malignant tumor of the central nervous system. The prognosis of high-grade glioma patient is very poor due to the difficulties in complete resection and resistance to radio-/chemotherapy. Therefore, it is worth investigating the molecular mechanisms involved in glioma drug resistance. MicroRNAs have been found to play important roles in tumor progression and drug resistance. Our previous work showed that miR-181b is involved in the regulation of temozolomide resistance. In the current study, we investigated whether miR-181b also plays a role in antagonizing the effect of teniposide. METHODS: MiR-181b expression was measured in 90 glioma patient tissues and its relationship to prognosis of these patients was analyzed. Cell sensitivity to teniposide was tested in 48 primary cultured glioma samples. Then miR-181b stably overexpressed U87 cells were generated. The candidate genes of miR-181b from our previous study were reanalyzed, and the interaction between miR-181b and target gene MDM2 was confirmed by dual luciferase assay. Cell sensitivity to teniposide was detected on miR-181b over expressed and MDM2 down regulated cells. RESULTS: Our data confirmed the low expression levels of miR-181b in high-grade glioma tissues, which is related to teniposide resistance in primary cultured glioma cells. Overexpression of miR-181b increased glioma cell sensitivity to teniposide. Through target gene prediction, we found that MDM2 is a candidate target of miR-181b. MDM2 knockdown mimicked the sensitization effect of miR-181b. Further study revealed that miR-181b binds to the 3'-UTR region of MDM2 leading to the decrease in MDM2 levels and subsequent increase in teniposide sensitivity. Partial restoration of MDM2 attenuated the sensitivity enhancement by miR-181b. CONCLUSIONS: MiR-181b is an important positive regulator on glioma cell sensitivity to teniposide. It confers glioma cell sensitivity to teniposide through binding to the 3'-UTR region of MDM2 leading to its reduced expression. Our findings not only reveal the novel mechanism involved in teniposide resistance, but also shed light on the optimization of glioma treatment in the future.

Flash healing of laser-induced graphene.

The advancement of laser-induced graphene (LIG) technology has streamlined the fabrications of flexible graphene devices. However, the ultrafast kinetics triggered by laser irradiation generates intrinsic amorphous characteristics, leading to high resistivity and compromised performance in electronic devices. Healing graphene defects in specific patterns is technologically challenging by conventional methods. Herein, we report the rapid rectification of LIG's topological defects by flash Joule heating in milliseconds (referred to as F-LIG), whilst preserving its overall structure and porosity. The F-LIG exhibits a decreased ID/IG ratio from 0.84 - 0.33 and increased crystalline domain from Raman analysis, coupled with a 5-fold surge in conductivity. Pair distribution function and atomic-resolution imaging delineate a broader-range order of F-LIG with a shorter C-C bond of 1.425 Å. The improved crystallinity and conductivity of F-LIG with excellent flexibility enables its utilization in high-performance soft electronics and low-voltage disinfections. Notably, our F-LIG/polydimethylsiloxane strain sensor exhibits a gauge factor of 129.3 within 10% strain, which outperforms pristine LIG by 800%, showcasing significant potential for human-machine interfaces.