Cycloartane triterpenoids and their glycosides from the rhizomes of Cimicifuga foetida.

A phytochemical study on the rhizomes of Cimicifuga foetida resulted in the isolation of two new cycloartane triterpenoids (1 and 2), eight new cycloartane glycosides (3-10), and six known cycloartane glycoside analogues (11-16). The structures of 1-10 were determined by application of spectroscopic methods, with the absolute configuration of 1 determined by X-ray crystallography. Compounds 1-6, as three pairs of epimers at C-10 and C-24, belong to a seven-membered-ring variant of 9,10-seco-9,19-cycloartane triterpenoids, and glycosides 3-10 were found to be 3-O-ß-D-xylopyranosides. The cytotoxicity of the isolates was evaluated against five selected human tumor cell lines, and the known compounds 15 and 16 showed cytotoxicity against the hepatocellular carcinoma SMMC-7721 cell line with IC50 values of 5.5 and 6.3 µM, respectively.

Microbial Metagenomes and Host Transcriptomes Reveal the Dynamic Changes of Rumen Gene Expression, Microbial Colonization and Co-Regulation of Mineral Element Metabolism in Yaks from Birth to Adulthood.

Yaks are the main pillar of plateau animal husbandry and the material basis of local herdsmen's survival. The level of mineral elements in the body is closely related to the production performance of yaks. In this study, we performed a comprehensive analysis of rumen epithelial morphology, transcriptomics and metagenomics to explore the dynamics of rumen functions, microbial colonization and functional interactions in yaks from birth to adulthood. Bacteria, eukaryotes, archaea and viruses colonized the rumen of yaks from birth to adulthood, with bacteria being the majority. Bacteroidetes and Firmicutes were the dominant phyla in five developmental stages, and the abundance of genus Lactobacillus and Fusobacterium significantly decreased with age. Glycoside hydrolase (GH) genes were the most highly represented in five different developmental stages, followed by glycosyltransferases (GTs) and carbohydrate-binding modules (CBMs), where the proportion of genes coding for CBMs increased with age. Integrating host transcriptome and microbial metagenome revealed 30 gene modules related to age, muscle layer thickness, nipple length and width of yaks. Among these, the MEmagenta and MEturquoise were positively correlated with these phenotypic traits. Twenty-two host genes involved in transcriptional regulation related to metal ion binding (including potassium, sodium, calcium, zinc, iron) were positively correlated with a rumen bacterial cluster 1 composed of Alloprevotella, Paludibacter, Arcobacter, Lactobacillus, Bilophila, etc. Therefore, these studies help us to understand the interaction between rumen host and microorganisms in yaks at different ages, and further provide a reliable theoretical basis for the development of feed and mineral element supplementation for yaks at different ages.

The impact of bloodmeal and geographic region on the richness, diversity, and function of internal microbial community in Haemaphysalis qinghaiensis from the Qinghai province, China.

Background: Ticks are ectoparasites that feed on blood and pose a threat to both the livestock industry and public health due to their ability to transmit pathogens through biting. However, the impact of factors such as bloodmeal and geographic regions on the bacterial microbiota of Haemaphysalis qinghaiensis remains poorly understood. Methods: In this study, we used the v3-v4 region of the 16S rRNA gene to sequence the microbiota of Haemaphysalis qinghaiensis from eight groups (HY_M, YS_M, XH_M, LD_M, BM_M, LD_F_F, LD_F, and BM_F_F) in Qinghai Province. Results: Significant differences in bacterial richness were observed between LD_F_F, BM_F_F, and LD_F (P < 0.01), and among the five groups (HY_M, YS_M, XH_M, BM_M, and LD_M) (P < 0.05). The bacterial diversity also differed significantly between LD_F_F, LD_F, and BM_F_F (P < 0.01), as well as among the five groups (HY_M, YS_M, XH_M, LD_M, and BM_M) (P < 0.01). The group with the highest number of operational taxonomic units (OTUs) was LD_F, accounting for 23.93 % (419/1751), while BM_F_F accounted for at least 0.80 % (14/1751). At the phylum level, Firmicutes was the most abundant, with relative abundance ranging from 7.44 % to 96.62 %. At the genus level, Staphylococcus had the highest abundance, ranging from 1.67 % to 97.53 %. The endosymbiotic bacteria Coxiella and Rickettsia were predominantly enriched in LD_F_F. Additionally, the 16S gene of Coxiella showed the highest identity of 99.07 % with Coxiella sp. isolated from Xinxiang hl9 (MG9066 71.1), while the 16S gene of Rickettsia had 100 % identity with Candidatus Rickettsia hongyuanensis strains (OK 662395.1). Functional predictions for the prokaryotic microbial community indicated that the main functional categories were Metabolic, Genetic information processing, and Environmental information processing across the eight groups. Conclusion: This study provides a theoretical basis for the prevention and treatment of tick-borne diseases, which is of great significance for public health.

Cytotoxic constituents from the skin of the toad Bufo bufo gargarizans.

To study the chemical composition of the skin of Bufo bufo gargarizans, various chromatographic methods were used in the isolation procedures and the structures of isolated compounds were determined based on NMR and MS analysis. As a result, two new compounds were isolated from its ethanolic extract and characterized as N-[2-hydroxy-2-(4-hydroxyphenyl)ethyl]-N-methylurea (1) and 19-oxocinobufotalin 3-adipoylarginine ester (2), together with 11 known compounds. Isolated bufadienolides showed significant inhibition effect against human hepatocellular carcinoma cell line SMMC-7721 in vitro.

[Three-dimensional finite element analysis of bone stress distribution around the hip joint prosthesis with stepped stem].

Based on the CT data, a medical treatment FE model of hip joint prosthesis with stepped stem was rebuilt according the anatomy of the hip joint. Under the loads of 1.5 times standard body weight (70kg), the mechanical behavior of the treatment model was calculated, and the influence of step structure and distribution for stepped stem on femur stress and stability of total hip replacement were analyzed by three-dimensional finite element analysis (3D-FEA). The results show that the step structure changs the bone stress transmission on the interface of stepped stem and femur, and benefits to reduce stress-shielding in the femur. For the same distribution of step, the reduction of stress-shielding for raised stepped stem is better than that for concave stepped stem. The raised stepped stem of which the steps is distributed one of third part of the stem is of the best effect of reduction of stress shielding in all of the analysis models, and is a beneficial mechanical design to relieves osteoporosis or osteopenia of femur caused by stress-shielding and improve the reliability of it in clinic.

Ehrlichia chaffeensis and Four Anaplasma Species With Veterinary and Public Health Significance Identified in Tibetan Sheep (Ovis aries) and Yaks (Bos grunniens) in Qinghai, China.

Tick-borne diseases (TBDs) can cause serious economic losses and are very important to animal and public health. To date, research on TBDs has been limited in Qinghai-Tibet Plateau, China. This epidemiological investigation was conducted to evaluate the distribution and risk factors of Anaplasma spp. and Ehrlichia chaffeensis in livestock in Qinghai. A total of 566 blood samples, including 330 yaks (Bos grunniens) and 236 Tibetan sheep (Ovis aries) were screened. Results showed that A. bovis (33.3%, 110/330) and A. phagocytophilum (29.4%, 97/330) were most prevalent in yaks, followed by A. ovis (1.2%, 4/330), A. capra (0.6%, 2/330), and E. chaffeensis (0.6%, 2/330). While A. ovis (80.9%, 191/236) and A. bovis (5.1%, 12/236) infection was identified in Tibetan sheep. To our knowledge, it is the first time that A. capra and E. chaffeensis have been detected in yaks in China. Apart from that, we also found that co-infection of A. bovis and A. phagocytophilum is common in yaks (28.2%, 93/330). For triple co-infection, two yaks were infected with A. bovis, A. phagocytophilum, and A. capra, and two yaks were infected with A. bovis, A. phagocytophilum, and E. chaffeensis. Risk analysis shows that infection with A. bovis, A. phagocytophilum, and A. ovis was related to region and altitude. This study provides new data on the prevalence of Anaplasma spp. and E. chaffeensis in Qinghai, China, which may help to develop new strategies for active responding to these pathogens.

Vector-Borne Pathogens with Veterinary and Public Health Significance in Melophagus ovinus (Sheep Ked) from the Qinghai-Tibet Plateau.

Melophagus ovinus (sheep ked) is a hematophagous ectoparasite that mainly parasitizes sheep. In addition to causing inflammation, wool loss, and skin damage to the animal hosts, M. ovinus also serves as a vector for a variety of pathogens and is highly likely to participate in the life and transmission cycle of pathogenic organisms. Herein, we investigated the presence and molecular characterization of vector-borne pathogens in M. ovinus from Qinghai-Tibet Plateau, China. A total of 92 M. ovinus pools collected from the Qinghai province of China were screened for the presence of selected vector-borne pathogens. The overall positive rate of A. ovis, A. bovis, A. phagocytophilum, and T. ovis in M. ovinus was 39.1%, 17.4%, 9.8%, and 89.1%, respectively. All of the samples were negative for Border disease virus (BDV), other Anaplasma species, Babesia spp., Rickettsia spp., and Borrelia spp. Co-infection of different Anaplasma species and T. ovis occurred in 51.2% of all samples with T. ovis. The positive rates of A. ovis, A. bovis, and A. phagocytophilum in different regions and altitudes of the sampling sites were significantly different. Sequence and phylogenetic analysis of target genes confirmed their identity with corresponding pathogens. Our results elucidate the occurrence and molecular characterization of Anaplasma spp. and Theileria spp. in M. ovinus, which could act as potential zoonotic reservoirs. To the best of our knowledge, this is the first report of the detection of A. bovis and A. phagocytophilum DNA in M. ovinus. This study gives the first extensive molecular survey of vector-borne pathogens with veterinary and public health significance in M. ovinus from the Qinghai-Tibet Plateau, China.

Spotted Fever Group Rickettsia Infecting Ticks (Acari: Ixodidae), Yak (Bos grunniens), and Tibetan Sheep (Ovis aries) in the Qinghai-Tibetan Plateau Area, China.

The Qinghai-Tibet Plateau Area (QTPA) has a complex natural ecosystem, causing a greatly increased risk of spreading various tick-borne diseases including rickettsial infections, which are regarded as one of the oldest known vector-borne zoonoses. However, the information of one of its pathogen, spotted fever group Rickettsia (SFG Rickettsia), is limited in tick vectors and animals in this area. Therefore, this study focused on the investigation of SFG Rickettsia in tick vectors, yaks (Bos grunniens), and Tibetan sheep (Ovis aries) in the QTPA. A total of 1,000 samples were collected from nine sampling sites, including 425 of yaks, 309 of Tibetan sheep, 266 of ticks. By morphological examination, PCR, and sequencing, we confirmed the species of all collected ticks. All tick samples, all yak and Tibetan sheep blood samples were detected based on SFG Rickettsia ompA and sca4 gene. The results showed that all tick samples were identified to be Haemaphysalis qinghaiensis, and the positive rates of SFG Rickettsia were 5.9% (25/425), 0.3% (1/309), and 54.1% (144/266) in yaks, Tibetan sheep, and ticks, respectively. All positive samples were sequenced, and BLASTn analysis of the ompA gene sequences of SFG Rickettsia showed that all positive samples from animals and ticks had 99.04-100% identity with yak and horse isolates from Qinghai Province, China. BLASTn analysis of the sca4 gene sequences of SFG Rickettsia showed that all positive samples had 97.60-98.72% identity with tick isolates from Ukraine. In addition, the phylogenetic analysis showed that all the SFG Rickettsia ompA and sca4 sequences obtained from this study belong to the same clade as Rickettsia raoultii isolated from livestock and ticks from China and other countries. Molecularly, this study detected and characterized SFG Rickettsia both in the tick vectors and animals, suggesting that the relationship between SFG Rickettsia, tick species and animal hosts should be explored to understand their interrelationships, which provide a theoretical basis for preventing control of this pathogen.

Studies on cytotoxic constituents from the skin of the toad Bufo bufo gargarizans.

To study the chemical composition of the skin of Bufo bufo gargarizans, many kinds of chromatography methods were used in the isolation procedures, while the structures of isolated compounds were determined on the basis of their NMR and MS spectral analysis. As a result, two new compounds were isolated from its ethanolic extract and characterized as cinobufotalin 3-nonanedioylarginine ester (8) and bufotalin 3-pimeloylarginine ester (14). Furthermore, 13 known compounds were obtained. Isolated bufadienolides showed significant inhibition effect against SMMC-7721 cell lines in vitro.

[3D finite element analysis of bone stress around distally osseointegrated implant for artificial limb attachment].

Using the CT data, we have constructed the finite element models of human femur distally amputated at high-position, middle-position and low-position, along with distally osseointegrated implant under the maximal load during a normal walking cycle. Results of finite element analysis revealed: the maximal stress of implant is produced near the exit of the amputated limb, where the fatigue breakpoint caused by cyclic stress would take place. With the ascending of truncated position, the peri-implant interfacial stress of bone increases. There is severe stress-shielding at the bone-implant interface, and there is concentration of stress at the end of implant and at the 3/4 point of femur, which would lead to bone loss and bone resorption and would shorten the longevity of implant. The results also showed that the curvature of natural bone has notable effect on the stress distribution, which should not be neglected. These data may provide reliable reference for the design and research of osseointegarted artificial limb.

A comparative study of calcium phosphate formation on bioceramics in vitro and in vivo.

Formation of calcium phosphate (Ca-P) on various bioceramic surfaces in simulated body fluid (SBF) and in rabbit muscle sites was investigated. The bioceramics were sintered porous solids, including bioglass, glass-ceramics, hydroxyapatite, alpha-tricalcium phosphate and beta-tricalcium phosphate. The ability of inducing Ca-P formation was compared among the bioceramics. The Ca-P crystal structures were identified using single-crystal diffraction patterns in transmission electron microscopy. The examination results show that ability of inducing Ca-P formation in SBF was similar among bioceramics, but considerably varied among bioceramics in vivo. Sintered beta-tricalcium phosphate exhibited a poor ability of inducing Ca-P formation both in vitro and in vivo. Octacalcium phosphate (OCP) formed on the surfaces of bioglass, A-W, hydroxyapatite and alpha-tricalcium phosphate in vitro and in vivo. Apatite formation in physiological environments cannot be confirmed as a common feature of bioceramics.

TEM study of calcium phosphate precipitation on HA/TCP ceramics.

This study focuses on phase identification of precipitation on bioactive calcium phosphate (BCP) surfaces in vitro and in vivo. The BCP used in this study consisted of 70 wt% hydroxyapatite (HA) and 30 wt% beta-tricalcium phosphate. Single crystalline precipitates of calcium phosphates on porous BCP bioceramics obtained after immersion in dynamic simulated body fluid (SBF) and after implantation in pig muscle were examined using electron diffraction in transmission electron microscope. The crystals formed in vitro in dynamic SBF were identified as octacalcium phosphate (OCP), instead of apatite. Most of the precipitated crystals in vivo samples had an HA structure; while OCP and dicalcium phosphate dihydrate were also identified. The evidence from single diffraction patterns indicates that apatite formation on bioactive ceramics is a complicated process, particularly in physiological environments where formation might include a transient stage of intermediate phases.

Plasma-sprayed calcium phosphate particles with high bioactivity and their use in bioactive scaffolds.

Highly crystalline feedstock hydroxyapatite (HA) particles with irregular shapes were spheroidized by plasma spraying them onto the surface of ice blocks or into water. The spherical Ca-P particles thus produced contained various amounts of the amorphous phase which were controlled by the stand-off distance between the spray nozzle and the surface of ice blocks or waiter. The smooth surface morphology without cracks of spherical Ca-P particles indicated that there were very low thermal stresses in these particles. Plasma-sprayed Ca-P particles were highly bioactive due to their amorphous component and hence quickly induced the formation of bone-like apatite on their surfaces after they were immersed in an acellular simulated body fluid at 36.5 C. Bone-like apatite nucleated on dissolved surface (due to the amorphous phase) of individual Ca-P particles and grew to coalesce between neighboring Ca-P particles thus forming an integrated apatite plate. Bioactive and biodegradable composite scaffolds were produced by incorporating plasma-spray ed Ca-P particles into a degradable polymer. In vitro experiments showed that plasma-sprayed Ca-P particles enhanced the formation of bone-like apatite on the pore surface of Ca-P/PLLA composite scaffolds.

Interaction of calcium and phosphate in apatite coating on titanium with serum albumin.

A Ca-deficient carbonate apatite coating on titanium was prepared by pre-calcifying titanium in a saturated Ca(OH)2 solution and then immersing in a supersaturated calcium phosphate solution. The interaction of the protein with the apatite coating on titanium was investigated by scanning electron microscopy with X-ray energy dispersion spectroscopy. X-ray photoelectron spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy. During immersion of the coating in bovine serum albumin (BSA) solution, accompanied by an adsorption of BSA onto the coating, calcium and phosphate ions dissolved and reprecipitated, resulting in the formation of the coating containing BSA from the surface to subsurface layers. The adsorption modified the structure and morphology of the apatite coating on titanium and changed the protein configuration. It was also found that the protein chemically adsorbed onto surfaces containing calcium or phosphorus, showed that both Ca and P on the apatite coating were the binding sites with protein. The BSA adsorption onto the coating involved several elements and groups. In this process. Ca played an essential role, and the interaction of Ca on the apatite coating with the protein stimulated the bond of the protein at P sites.

Dissolution and mineralization behaviors of HA coatings.

The dissolution and mineralization behavior of HA coatings are two of the main factors governing the bioactivity of coatings. After different post treatment operators, the plasma-sprayed HA coatings have different characteristics, including different chemical composition, crystallinity, crystallite size and dissolution behavior. In this study, HA coatings were characterized by X-ray diffraction, scanning electron microscope, and Fourier transform infrared spectra before and after immersion in simulated body fluid (SBF). When immersed in SBF, both dissolution and precipitation occurred at the same time, but the kinetics of dissolution was quite different from that of precipitation. The former was dominated by ion exchange, while the latter was controlled by the ion concentration product and the solubility of the particles. Therefore, the dissolution behaviors of phosphate ions partly depended on the dissolution behaviors of calcium ions. With the increase of ions concentration in solution by dissolution, more nucleation sites appeared on the surface of coatings. Crystalline grains gradually grew up on the nucleation sites and developed into biomineral layers. The biomineral layers were the results of the precipitation of the ions in the solution; and the carbonates partially substituted phosphates to form bone-like apatite. The different dissolution characters resulted in quite different morphology of the biomineral layers: the coatings with low solubility induced biomineral layers of large grains; on the contrary, the biomineral layers of network structure were observed on the more soluble coatings.

[A study of bone-like apatite formation on porous calcium phosphate ceramics in dynamic SBF].

This study aimed at investigating the influence of the flow rate of simulated body fluid (SBF) (2 ml/100 ml.min) of body fluid in skeletal muscle upon the formation of bone-like apatite on porous calcium phosphate ceramics. The in vitro immersion experiment in SBF flowing at normal physiological rate is referred to as dynamic SBF. The results showed that bone-like apatite could only formed in the pores of porous calcium phosphate when SBF flow at physiological rate (2 ml/100 ml.min) of body fluid in skeletal muscle. At the same time, bone-like apatite could form both in the pores and on the surface of the samples if the flowing physiological solution is 1.5 SBF. When the flowing speed of SBF is higher than normal physiological speed (10 ml/100 ml.min), no bone-like apatite could be detected both on the surface and in the pores of the materials. This result is in concordance with animal experiments. The dynamic SBF simulates the biological environment of bone-like apatite formation in body better than static SBF (SBF does not flow). This method is very useful for the research of the mechanism of bonelike apatite formation, which is the key step of bone growth on biomaterials, and can be used as an effective approach to investigate mechanism of the osteoinduction of calcium phosphate in nonosseous tissues in vivo.

[A study of bone-like apatite formation on calcium phosphate ceramics in different kinds of animals in vivo].

Bone-like apatite formation on the surface of calcium phosphate ceramics has been believed to be necessary for new bone to grow on the ceramics and to be related to the osteoinductivity of the material. The research of bone-like apatite formation is a great help to understanding the mechanism of osteoinduction. Synthetic porous calcium phosphate ceramics (HA/TCP = 70/30) were implanted intramuscularly in pigs, dogs, rabbits and rats to make a comparative study of the bone-like apatite formation onto the porous HA/TCP ceramics in different animals. Specimens were harvested at 14 days after implantation. Samples were detected for the surface morphology with SEM. The chemical composition of the sample surface after implantation was analyzed with reflection infrared (R-IR). Obvious bone-like apatite formation could be detected in the sections of porous specimens harvested from all animals after 14 days intramuscular implantation. Crystal deposition could be only observed on the surface of the concave regions of the samples collected from dogs, rabbits and rat. On the contrary, evenly distributed flake-shaped crystal could be found on the pore surface and also on the outer surface of the materials implanted in pigs. The morphology of bone-like apatite in pigs was different from that in the others animals. Bone-like apatite was not observed in dense specimen implanted intramuscularly. Bone-like apatite formed faster on specimens implanted in rabbit than that in other animals. This formation sequence is different from the sequence of osteoinductivity of biphasic calcium phosphate ceramics implanted in these animals. The results demonstrated that the formation of bone-like apatite on materials is a prerequisite condition to their osteoinduction but other factors also play important roles in osteoinduction.

[The effects of surface morphology of calcium phosphate ceramics on apatite formation in dynamic SBF].

Bone-like apatite formation on the surface of calcium phosphate ceramics has been believed to be the prerequisite of new bone growth on ceramics and to be related to the osteoinductivity of the material. The research of the factors effecting bone-like apatite formation is a great help in understanding the mechanism of osteoinduction. This paper is aimed to a comparative study of in vitro formation of bone-like apatite on the surface of dense and rough calcium phosphate ceramics with SBF flowing at different rates. The results showed that the rough surface was beneficial to the formation of bone-like apatite, and the apatite formed faster in 1.5 SBF than in SBF. Rough surface, namely, larger surface area, increased the dissolution of Ca2+ and HPO4(2-) and higher concentration of Ca2+ and HPO4(2-) ions of SBF and was in turn advantageous to the accumulation of Ca2+, HPO4(2-), PO4(3-) near the ceramic surface. Local supersaturating concentration of Ca2+, HPO4(2-), PO4(3-) near sample surface was essential to nucleation of apatite on the surface of sample.

[Research of bone bridge-like on plasma sprayed HA coating].

Bone formation on hydroxyapatite (HA) coating in the presence of gaps is important for clinical application. Pure Ti and hydroxyapatite coated by plasma sprayed samples were implanted in dog respectively. The implants were surrounded by gaps of 2 mm, and the follow-up period was 12 weeks. Histological examination and histomorphometry revealed that gaps could be bridged by bone provided the hydroxyapatite coating was applied, and that pure Ti implants were surrounded by fibrous tissue with no bone contact at all.

[Effects of simulated body fluid flowing rate on bone-like apatite formation on porous calcium phosphate ceramics].

Objective. Bone-like apatite formation on the surface of calcium phosphate ceramics was believed to be the necessary step that new bone grows on the ceramics and to be relative to the osteoinductivity of the material. This study aimed at investigating the influence of the flow rate of simulated body fluid (SBF) (2 ml/min) in skeletal muscle upon the formation of bone-like apatite on porous calcium phosphate ceramics. Method. The dynamic condition was realized by controlling the SBF flowing in/out of the sample chamber of 100 ml. The flow rate of 2 ml/min is close to that in human muscle environment. The pH and inorganic ionic composition of SBF are close to those of human body fluid. Result. Bone-like apatite formation was relatively easier to occur in static SBF than in dynamic SBF. Experiment with flowing SBF (dynamic SBF) is better in mimicking the living body fluid than static SBF. Conclusion. The results from dynamic SBF may more truly show the relation between apatite layer formation and osteoinduction in biomaterials than that from in vitro experiments before.