Enhancing maize's nitrogen-fixing potential through ZmSBT3, a gene suppressing mucilage secretion.

Maize (Zea mays) requires substantial amounts of nitrogen, posing a challenge for its cultivation. Recent work discovered that some ancient Mexican maize landraces harbored diazotrophic bacteria in mucilage secreted by their aerial roots. To see if this trait is retained in modern maize, we conducted a field study of aerial root mucilage (ARM) in 258 inbred lines. We observed that ARM secretion is common in modern maize, but the amount significantly varies, and only a few lines have retained the nitrogen-fixing traits found in ancient landraces. The mucilage of the high-ARM inbred line HN5-724 had high nitrogen-fixing enzyme activity and abundant diazotrophic bacteria. Our genome-wide association study identified 17 candidate genes associated with ARM across three environments. Knockouts of one candidate gene, the subtilase family gene ZmSBT3, confirmed that it negatively regulates ARM secretion. Notably, the ZmSBT3 knockout lines had increased biomass and total nitrogen accumulation under nitrogen-free culture conditions. High ARM was associated with three ZmSBT3 haplotypes that were gradually lost during maize domestication, being retained in only a few modern inbred lines such as HN5-724. In summary, our results identify ZmSBT3 as a potential tool for enhancing ARM, and thus nitrogen fixation, in maize.

MiR-222-3p downregulation prompted the migration, invasion and recruitment of endothelial progenitor cells via ADIPOR1 expression increase-induced AMKP activation.

BACKGROUND: Clinical data show that aneurysm rupture causes high mortality in aged men. MicroRNAs (miRNAs) were reported to regulate endothelial progenitor cells (EPCs) which play a vital role in repairing endothelial damage and maintaining vascular integrity. This study identified a novel miRNA regulator for the functions of EPCs in aneurysm repair. METHODS: Abdominal aortic aneurysm (AAA) model was established on Sprague-Dawley rats which later underwent antagomiR-222 treatment. The histopathological changes of AAA rats were examined by hematoxylin-eosin staining. Flow cytometry was performed to quantify EPCs in peripheral blood and identify EPCs isolated from the rat femur. The potential target of miR-222-3p was predicted by TargetScan v7.2 and validated by Dual-luciferase reporter assay. The effects of miR-222-3p and ADIPOR1 on the migration, invasion and tube formation of EPCs were evaluated by wound healing, Transwell and tube formation assays. The expressions of miR-222-3p and ADIPOR1 in aortic aneurysm tissues and EPCs were assessed by qRT-PCR or Western blot. RESULTS: AAA exhibited histopathological abnormality, a decreased number of EPCs in the peripheral blood and an increased miR-222-3p expression. AntagomiR-222 injection reversed all these phenomena in AAA rats. Upregulating miR-222-3p expression inhibited the migration, invasion, and tube formation of EPCs, and the expressions of ADIPOR1 and phosphorylated-AMKP, while downregulating miR-222-3p expression exerted opposite effects in EPCs. ADIPOR1 was identified as a target gene of miR-222-3p. Overexpressing ADIPOR1 abrogated the effects of miR-222-3p upregulation on EPCs. CONCLUSION: Downregulated miR-222-3p prompted the migration, invasion and recruitment of EPCs by targeting ADIPOR1-induced AMKP activation.

Giant Interatrial Septal Lipoma Filling the Right Atrium Causing Slight Symptoms: A Case Report.

Cardiac lipoma is extremely rare. Here, we present a unique illustrative case of an interatrial septal lipoma protruding into the right atrium, causing symptoms in a 54-year-old male. Echocardiogram and computed tomography showed a well-shaped, giant, and fixed mass located in the interatrial septum and right atrium. The only manifestation was palpitation, though the mass filled almost all of the atrium and compressed the superior vena cava. The patient received resection of the large-sized lipoma, which was 87mm in diameter and weighed 300-400g. Pathological exam demonstrated mature lipocytes and substantiated the diagnosis of lipoma. The patient did well postoperatively, and symptoms were resolved.

Effect of quartz lens structure on the optical performances of near-ultraviolet light-emitting diodes.

Near-ultraviolet light-emitting diodes (NUV-LEDs) have been a rising UV light source for identification, resin curing, ink-printing, and illumination. In pursuit of more extensive application in different fields, their optical performances are obliged to be better. In this paper, we investigated the effect of a quartz lens structure on the optical performances of NUV-LEDs. The feature size of the quartz lens was optimized by optical simulations. When the quartz lens has the optimized feature size with a height above 1.8 mm while adding a silicone layer between the chip and the lens, the NUV-LEDs achieve the highest light efficiency, and exhibit a smallest light spot and largest light energy at the center region. Furthermore, different lenses were prepared and applied in the packaging of NUV-LEDs. As a consequence, the light output power of NUV-LEDs with a silicone layer is enhanced by 20.19% at the current of 220 mA. The light output power of NUV-LEDs is enhanced by 38.66%, 43.98%, and 53.30%, respectively, by using the different quartz lenses at the current of 220 mA, and the NUV-LED achieves the highest luminous intensity by 0.098 cd and smallest output light angle by 106.0°. It is attributed to the significant refraction effect of the quartz lens, which improves the optical performances of NUV-LEDs.

Enhanced light extraction of deep ultraviolet light-emitting diodes by using optimized aluminum reflector.

Deep ultraviolet light-emitting diodes (DUV-LEDs) have become a promising UV light source for sterilization, disinfection, and purification. However, the challenge in practical application of DUV-LEDs still remains in their low light efficiency. In this paper, we propose an optimized aluminum (Al) reflector for the light extraction enhancement of DUV-LEDs. The optical model of DUV-LEDs was established, and the optical simulations were performed to achieve the optimized reflector. The DUV-LEDs exhibit the highest light efficiency when the reflector has the optimized feature sizes with an angle of 60°, a height of 2.0 mm, and an internal radius of 2.5 mm. Furthermore, the optimized reflector with different reflectance was fabricated and applied for the packaging of DUV-LEDs. Consequently, the light output powers of DUV-LEDs are enhanced by 28.8%, 37.0%, and 43.8%, respectively, by using the different reflectors at the driving current of 100 mA. It is attributed to the remarkable reflection effect of the Al reflector, which increases the light extraction of the sidewall emission from the DUV-LED chip.

[Chemical constituents from lipophilic parts of stems of Celastrus monospermus].

The chemical constituents from lipophilic parts of the stems of Celastrus monospermus were studied in this paper. The compounds were separated and purified by repeated column chromatographic methods including silica gel, ODS and Sephadex LH-20, and the structures of compounds were determined by spectral data analyses. Twenty six compounds were obtained and identified as 3-oxofriedelane(1), 3-oxofriedelan-28-al(2), 3,12-dioxofriedelane(3), 3ß-hydroxyolean-12-en(4), 3-oxo-28-hydroxyfriedelane(5), 3-oxo-29-hydroxyfriedelane(6), 3-oxo-11ß-hydroxyfriedel-ane(7), 3-oxo-16α-hydroxyfriedelane(8), 3,12-dioxo-28-hydroxyfriedelane(9), 1,3-dioxo-15α-hydroxyfriedelane(10), 3ß,6α-dihydroxyolean-12-en(11), 3-oxo-7α,26-dihydroxyfriedel-ane(12), oleanolic acid(13), 3,15-dioxofriedelane(14), 3α-friedelinol(15), 3,12-dioxofriedelan-28-al(16), 3-oxo-12α-hydroxyfriedelane(17), 3,15-dioxo-12α-hydroxyfriedelane(18), 3ß,11ß-dihydroxyolean-12-en(19), 1ß,3ß-dihydroxylupan-20(29)-en(20), 3-oxo-12α,28-dihydroxyfriedelane(21), 3ß,23-epoxyfriedelan-28-oic acid(22), salaquinone A(23), 2α,3ß-dihydroxyfriedelan-28-oic acid(24), 23-nor-6-oxodemethylpristimerol(25) and 3-oxo-friedelan-27,28-dioic acid(26). Among them, compounds 8, 10-15, 18-20, 22-26 were obtained from this plant for the first time, and compounds 8, 10, 12, 14-15, 18, 22-24, 26 were separated from the genus Celastrus for the first time.

Thermally stable WLEDs with excellent luminous properties by screen-printing a patterned phosphor glass layer on a microstructured glass plate.

In order to improve the luminous properties and thermal reliability of white light-emitting diodes (WLEDs), we proposed a promising phosphor-in-glass (PiG) converter, which was prepared by screen-printing a patterned phosphor glass layer on a microstructured glass plate. The patterned layer achieves four-quadrant phosphor geometry based on separated yellow Y3Al5O12:Ce3+ (YAG:Ce3+) and red CaAlSiN3:Eu2+ (CASN:Eu2+) phosphor parts. Comparison experiments between the patterned PiG with and without a microstructure array (MSA) were conducted at different phosphor glass thicknesses. Consequently, for the phosphor glass thickness of 75 µm, the luminous efficacy (LE) of the proposed PiG is increased by 12.5% owing to the reduction of total internal reflection at the glass-air interface by the MSA, and the corresponding correlated color temperature (CCT) and color rendering index are 3701 K and 85.1, respectively. Furthermore, the CCT deviations of patterned PiG are reduced from 405 to 115 K and 1004 to 548 K by the MSA at the average CCTs of 3800 K and 5500 K, respectively. The results demonstrate that the proposed PiG converter can improve the LE and angular color uniformity of multi-component PiG-based WLEDs simultaneously.

Thermally stable multi-color phosphor-in-glass bonded on flip-chip UV-LEDs for chromaticity-tunable WLEDs.

In this paper, we propose a thermally stable multi-color phosphor-in-glass (PiG) for chromaticity-tunable white light-emitting diodes (WLEDs). The multi-color PiG has a red, green, and blue (RGB) phosphor glass layer, which was screen-printed and co-sintered on a glass plate with a low temperature of 600°C. The WLED with ultra-compact structure was fabricated by the RGB-PiG directly bonded on a flip-chip ultraviolet (UV) LED. By controlling the weight ratio of R∶G∶B phosphors, the thickness of the RGB layer, and the weight ratio of phosphors to glass powders (PtG), the chromaticity of RGB-PiG based WLEDs can be effectively tuned with high color quality. With the R∶G∶B ratio of 2∶3∶2, the RGB thickness of 75 µm, and the PtG ratio of 2∶1, the RGB-PiG based WLED achieves a natural white light with a luminous efficacy (LE) of 27.8 lm/W, a correlated color temperature of 4245 K, and a color rendering index of 92.6 at the current of 350 mA. The LE losses of the RGB-PiG based and RGB phosphor-in-silicone based WLEDs are 4.7% and 14.6% after the aging tests of 1000 h at 100°C, respectively. The results demonstrate that the multi-color PiG is a promising converter for UV-excited WLEDs.

Optical performance improvement of phosphor-in-glass based white light-emitting diodes through optimized packaging structure.

To improve the optical performance of multi-component phosphor-in-glass (PiG) based white light-emitting diodes (WLEDs), we proposed an optimized packaging structure, which is a combined structure of a patterned PiG with a crater-type lens. The patterned PiG yields a red phosphor circle surrounded by a yellow phosphor concentric ring. Comparison simulations and experiments between the conventional mixed structure, patterned structure, and proposed structure were conducted. Compared with the mixed structure and patterned structure, the luminous efficacy of the proposed structure is increased by 19.3% and 10.7% at the driving current of 350 mA, respectively. Furthermore, the deviation of the correlated color temperature (CCT) of the patterned PiG is reduced from 906 to 129 K by the crater-type lens at the average CCT of 4100 K. The results demonstrate that the proposed packaging structure can improve the luminous efficacy and angular color uniformity (ACU) of a PiG-based WLED simultaneously.

Luminous efficacy enhancement of ultraviolet-excited white light-emitting diodes through multilayered phosphor-in-glass.

To enhance the luminous efficacy of ultraviolet-excited white light-emitting diodes (WLEDs), a novel packaging structure that is based on a multilayered red, green, and blue (RGB) phosphor-in-glass (PiG) was proposed. The RGB PiG was prepared by screenprinting and low temperature sintering, and the effects of different configuration orders of RGB phosphor layers on the optical performance of WLEDs were studied. Compared with the conventional mixed-RGB PiG, the luminous efficacy of WLEDs packaged by the multilayered PiG with the order of R-G-B is increased by 8.2% at the driving current of 500 mA, and the corresponding correlated color temperature (CCT) and color rendering index (CRI) are 2984 K and 86.8, respectively. Moreover, the WLEDs packaged by multilayered G-R-B PiG yield the highest luminous efficacy of 27.19 lm/W at the expense of color quality, which is still an acceptable warm light, with a CCT of 3326 K and a CRI of 84.2.

Radiological findings of malignant peripheral nerve sheath tumor: reports of six cases and review of literature.

BACKGROUND: Malignant peripheral nerve sheath tumor (MPNST) is a kind of rare neurogenic tumor. If associated with neurofibromatosis type 1, MPNST usually has a higher mortality. The aim of the article is to assess the imaging characteristics of MPNST and compare them with those of benign peripheral nerve sheath tumor (BPNST) to characterize this tumor. METHODS: Clinical and imaging data of six cases with MPNST and 28 cases with BPNST in our institution since 2011 were retrospectively reviewed. Thirty-three patients have available MR imaging data, and two patients of MPNST also accepted CT scan. One patient accepted CT scan only. Location, size, shape, signal or density, boundary, bone destruction, relation to adjacent nerve, contrast-enhanced features as well as some other signs were assessed and compared with statistical software. Student's t test was used for comparison of continuous variables. Fisher's exact test was used for analysis of nominal variable. A P value ≤0.05 was considered to be statistically significant. RESULTS: Differences existed between two groups in tumor size ((7.2 ± 3.3)cm in MPNST vs. (3.8 ± 1.4)cm in BPNST), unclear margin (4/6 in MPNST vs. 1/28 in BPNST), eccentricity to the nerve (1/6 in MPNST vs. 21/28 in BPNST), intratumoral lobulation (4/6 in MPNST vs. 2/28 in BPNST), peritumoral edema (3/6 in MPNST vs. 0 in BPNST), and peripheral enhancement (4/6 in MPNST (three of five MR, one CT) vs. 4/28 in BPNST). Bone destruction was observed in one MPNST. CONCLUSIONS: MR imaging is a valuable, non-invasive modality for the diagnosis of MPNST. Peripheral enhancement with non-cystic appearance or remarkable heterogeneous enhancement may be useful for differential diagnosis. Other imaging features such as large size (over 5 cm in diameter), ill-defined margin, intratumoral lobulation, peritumoral edema, and adjacent bone destruction are also supportive of MPNST.

Fe(III)EDTA and Fe(II)EDTA-NO reduction by a sulfate reducing bacterium in NO and SO2 scrubbing liquor.

A viable process concept, based on NO and SO2 absorption into an alkaline Fe(II)EDTA (EDTA: ethylenediaminetetraacetic acid) solution in a scrubber combined with biological reduction of the absorbed SO2 utilizing sulfate reducing bacteria (SRB) and regeneration of the scrubbing liquor in a single bioreactor, was developed. The SRB, Desulfovibrio sp. CMX, was used and its sulfate reduction performances in FeEDTA solutions and Fe(II)EDTA-NO had been investigated. In this study, the detailed regeneration process of Fe(II)EDTA solution, which contained Fe(III)EDTA and Fe(II)EDTA-NO reduction processes in presence of D. sp. CMX and sulfate, was evaluated. Fe(III)EDTA and Fe(II)EDTA-NO reduction processes were primarily biological, even if Fe(III)EDTA and Fe(II)EDTA-NO could also be chemically convert to Fe(II)EDTA by biogenic sulfide. Regardless presence or absence of sulfate, more than 87 % Fe(III)EDTA and 98 % Fe(II)EDTA-NO were reduced in 46 h, respectively. Sulfate and Fe(III)EDTA had no affection on Fe(II)EDTA-NO reduction. Sulfate enhanced final Fe(III)EDTA reduction. Effect of Fe(III)EDTA on Fe(II)EDTA-NO reduction rate was more obvious than effect of sulfate on Fe(II)EDTA-NO reduction rate before 8 h. To overcome toxicity of Fe(II)EDTA-NO on SRB, Fe(II)EDTA-NO was reduced first and the reduction of Fe(III)EDTA and sulfate occurred after 2 h. First-order Fe(II)EDTA-NO reduction rate and zero-order Fe(III)EDTA reduction rate were detected respectively before 8 h.

Improvement in angular color uniformity of white light-emitting diodes using screen-printed multilayer phosphor-in-glass.

Angular color uniformity (ACU) is a key optical property of white light-emitting diodes (WLEDs) and high ACU is strongly demanded in illumination applications. In this paper, a multilayer phosphor-in-glass (PiG), which can be produced by the screen-printing method, is proposed to improve the ACU of LED packages. The screen-printing method provides a feasible scheme to produce multilayer, various-shaped PiG with a controllable pattern. Angular correlated color temperature (CCT) distributions of the LED packages with multilayer PiG are simulated numerically and measured experimentally. Optical performance of the LED package with optimized three-layer cone-shaped PiG is compared with that of packages with two-layer and one-layer PiG. The experimental measurements indicate that the deviation of angular CCT can be reduced from 761 to 171 K by cone-shaped PiG at average CCT of 6000 K. The results demonstrate that higher angular color uniformity can be achieved by LED packages with multilayer cone-shaped PiG.

A Novel PiGF@Diamond Color Converter with a Record Thermal Conductivity for Laser-Driven Projection Display.

High-brightness laser lighting is confronted with crucial challenges in developing laser-excitable color converting materials with effective heat dissipation and super optical performance. Herein, a novel composite of phosphor-in-glass film on transparent diamond (PiGF@diamond) is designed and fabricated via a facile low-temperature co-sintering strategy. The as-prepared La3Si6N11:Ce3+ (LSN:Ce) PiGF@diamond with well-retained optical properties of raw phosphor shows a record thermal conductivity of ≈599 W m-1 K-1, which is about 60 times higher than that of currently well-used PiGF@sapphire (≈10 W m-1 K-1). As a consequence, this color converter can bear laser power density up to 40.24 W mm-2 and a maximum luminance flux of 5602 lm without luminescence saturation due to efficient inhibition of laser-induced heat accumulation. By further supplementing red spectral component of CaAlSiN3:Eu2+ (CASN:Eu), the PiGF@diamond based white laser diode is successfully constructed, which can yield warm white light with a high color rendering index of 89.3 and find practical LD-driven applications. The findings will pave the way for realizing the commercial application of PiGF composite in laser lighting and display.

Preparation of a YAG:Ce phosphor glass by screen-printing technology and its application in LED packaging.

A simple and practical method for preparing phosphor glass is proposed. Phosphor distribution and element analysis are investigated by optical microscope and field emission scanning electron microscope (FE-SEM). The phosphor particles dispersed in the matrix are vividly observed, and their distributions are uniform. Spectrum distribution and color coordinates dependent on the thickness of the screen-printed phosphor layer coupled with a blue light emitting diode (LED) chip are studied. The luminous efficacy of the 75 µm printed phosphor-layer phosphor glass packaged white LED is 81.24 lm/W at 350 mA. This study opens up many possibilities for applications using the phosphor glass on a selected chip in which emission is well absorbed by all phosphors. The screen-printing technique also offers possibilities for the design and engineering of complex phosphor layers on glass substrates. Phosphor screen-printing technology allows the realization of high stability and thermal conductivity for the phosphor layer. This phosphor glass method provides many possibilities for LED packing, including thin-film flip chip and remote phosphor technology.

[Preliminary study of breast cancer magnetic resonance targeting diagnosis basing on magnetic nanoparticles in vitro].

OBJECTIVE: To develop a magnetic nanoparticles based magnetic resonance (MR) probe targeting CD40 mutant in the imaging of breast cancer cells in vitro. METHODS: For preparing an immunologically competent probe, monoclonal antibody was conjugated with ultrasmall superparamagnetic iron oxide (USPIO) particles basing on chemical cross-linking method.Its bioactivity was analyzed with flow cytometry, confocal microscopy and Prussian blue staining. The probe's cell MR imaging in vitro was conducted on breast cancer cells (M231) high expressing CD40 mutant. The signal data from different groups were collected and analyzed with one-way variance and least significant difference-t test. RESULTS: The molecular probe carrying nanoparticles and CD40 mutant antibody was constructed and separated successfully. The probe had similar magnetic property compared with original USPIO particles.It could recognize CD40 mutant on breast cancer cells (M231) with high specificity. MR cell imaging in vitro shows that T2 and T2(*) obviously shortened after probe binding with M231 cells and T2 weighted imaging become darker than control groups, the time of T2 is 5H6-USPIO (51.66 ± 5.31) , 5C11-USPIO (92.89 ± 4.72), USPIO (64.56 ± 3.85) ms. The T2 and T2(*) relaxation time of experiment group was shorter than control groups with statistical significance (P < 0.01) . CONCLUSION: MR molecular probe targeting CD40 mutant may bind with breast cancer cells (M231) to provide further in vivo animal MR imaging. And CD40 mutant is expected to provide a new target for MR molecular imaging of breast cancer.

Role of Kupffer cells in tolerance induction after liver transplantation.

Currently, liver transplantation has reached a level of maturity where it is considered an effective treatment for end-stage liver disease and can significantly prolong the survival time of patients. However, acute and chronic rejection remain major obstacles to its efficacy. Although long-term use of immunosuppressants can prevent rejection, it is associated with serious side effects and significant economic burden for patients. Therefore, the investigation of induced immune tolerance holds crucial theoretical significance and socio-economic value. In fact, the establishment of immune tolerance in liver transplantation is intricately linked to the unique innate immune system of the liver. Kupffer cells, as a crucial component of this system, play a pivotal role in maintaining the delicate balance between inflammatory response and immune tolerance following liver transplantation. The important roles of different functions of Kupffer cells, such as phagocytosis, cell polarization, antigen presentation and cell membrane proteins, in the establishment of immune tolerance after transplantation is comprehensively summarized in this paper. Providing theoretical basis for further study and clinical application of Kupffer cells in liver transplantation.

Bioinspired Multiscale Micro-/Nanofiber Network Design Enabling Extremely Compressible, Fatigue-Resistant, and Rapidly Shape-Recoverable Cryogels.

Cryogels with extreme mechanical properties such as ultrahigh compressibility, fatigue resistance, and rapid recovery are attractive in biomedical, environmental remediation, and energy storage applications, which, however, are difficult to achieve in man-made materials. Here, inspired by the multiscale macro-/microfiber network structure of spider web, we construct an ultraelastic chitosan cryogel with interconnected hybrid micro-/nanofibers (CMNF cryogels) via freeze-induced physicochemical cross-linking. Chitosan chains are directionally assembled into high-aspect-ratio microfibers and nanofibers under shear-flow induction, which are further assembled into an interconnected three-dimensional (3D) network structure with staggered microfibers and nanofibers. In this multiscale network, nanofibers connecting the microfibers improve the stability, while microfibers improve the elasticity of the CMNF cryogels through long-range interaction. The synergy of the two-scale fibers endows the CMNF cryogel with extraordinary mechanical properties in comparison to those assembled with single-scale fibers, including its ultrahigh ultimate strain (97% strain with 50 cycles), excellent fatigue resistance (3200 compressing-releasing cycles at 60% compression strain), and rapid water-triggered shape recovery (recovering in ∼1 s). Moreover, the fibrous CMNF cryogel shows excellent functionalization capability via the rapid assembly of nanoscale building blocks for flexible electronics and environmental remediation. Our work thereby demonstrates the potential of this bioinspired strategy for designing gel materials with extreme mechanical properties.

Exploration of the Mechanisms of Differential Indole Alkaloid Biosynthesis in Dedifferentiated and Cambial Meristematic Cells of Catharanthus roseus Using Transcriptome Sequencing.

Catharanthus roseus produces terpenoid indole alkaloids (TIAs) of high medicinal importance. The current research focuses on finding an efficient production system such as cell suspension cultures for high TIA concentrations. Catharanthus roseus cambial meristematic cells (CMCs) offer multiple advantages over dedifferentiated cells (DDCs) regarding growth, homogeneity, and shear resistance. Our lab has established a CMC culture system induced by C. roseus cambium. We determined the concentrations of TIAs in CMCs and DDCs. CMCs produced significantly higher concentrations of total alkaloids, vindoline, vinblastine, catharanthine, and ajmalicine as compared to DDCs. We then performed Illumina HiSeq transcriptome sequencing of CMCs and DDCs and explored the differential transcriptomic signatures. Of the 96,004 unigenes, 9,564 were differentially expressed between the 2 cell suspension types. These differentially expressed genes (DEGs) were enriched in 137 KEGG pathways. Most importantly, genes from the indole alkaloid biosynthesis and the upstream pathways i.e., tryptophan metabolism, monoterpenoid biosynthesis, tropane, piperidine, and pyridine alkaloid biosynthesis, and terpenoid backbone biosynthesis showed differential transcriptomic signatures. Remarkably, the expression of genes associated with plant hormone biosynthesis, signaling, and MAPK signaling pathways was relatable to the different TIA concentrations in CMCs and DDCs. These results put forward multiple target genes, transcription factors, and regulators to develop a large-scale TIA production system using C. roseus CMCs.

Promotion of High-Speed Copper-Filling Performance for Interconnections with Increasing Aspect-Ratio Using Compound Additives.

Interconnections are essential for integrating the packaging substrate, and defect-free copper-filling can further improve the reliability in through holes (THs). The coating properties and filling processes are mainly dominated by the interplays among additives in the direct current electroplating. The acidic copper sulfate electroplating solution contained three typical convection-dependent additives and chloride ions (Cl-). The THs with aspect ratios (ARs) of 6.25, 5, and 4.17 (thickness of 500 µm) were selected as the study subjects. The effects of Cl- and ARs on the interactions among the additives were investigated in detail using electrochemical measurements, which were verified by the THs filling experiments. The additive compounds present a convection enhanced inhibition effect and cathodic polarization, leading to a copper filling capacity increase with ARs and the amelioration of copper compactness and corrosion resistance. The defect-free copper filling of THs and a uniform mirror bright surface circuit can be achieved simultaneously using compound additives at a relatively high speed.