Genome-wide association study identifies novel susceptible loci and evaluation of polygenic risk score for chronic obstructive pulmonary disease in a Taiwanese population.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) describes a group of progressive lung diseases causing breathing difficulties. While COPD development typically involves a complex interplay between genetic and environmental factors, genetics play a role in disease susceptibility. This study used genome-wide association studies (GWAS) and polygenic risk score (PRS) to elucidate the genetic basis for COPD in Taiwanese patients. RESULTS: GWAS was performed on a Taiwanese COPD case-control cohort with a sample size of 5,442 cases and 17,681 controls. Additionally, the PRS was calculated and assessed in our target groups. GWAS results indicate that although there were no single nucleotide polymorphisms (SNPs) of genome-wide significance, prominent COPD susceptibility loci on or nearby genes such as WWTR1, EXT1, INTU, MAP3K7CL, MAMDC2, BZW1/CLK1, LINC01197, LINC01894, and CFAP95 (C9orf135) were identified, which had not been reported in previous studies. Thirteen susceptibility loci, such as CHRNA4, AFAP1, and DTWD1, previously reported in other populations were replicated and confirmed to be associated with COPD in Taiwanese populations. The PRS was determined in the target groups using the summary statistics from our base group, yielding an effective association with COPD (odds ratio [OR] 1.09, 95% confidence interval [CI] 1.02-1.17, p = 0.011). Furthermore, replication a previous lung function trait PRS model in our target group, showed a significant association of COPD susceptibility with PRS of Forced Expiratory Volume in one second (FEV1)/Forced Vital Capacity (FCV) (OR 0.89, 95% CI 0.83-0.95, p = 0.001). CONCLUSIONS: Novel COPD-related genes were identified in the studied Taiwanese population. The PRS model, based on COPD or lung function traits, enables disease risk estimation and enhances prediction before suffering. These results offer new perspectives on the genetics of COPD and serve as a basis for future research.

Dual-Coating of Fluorinated Polydimethylsiloxane/Fluorinated SiO2 Nanoparticles for Superhydrophobic and High-Efficiency Bacteriostatic Surface.

A simple two-step spray method is used to prepare superhydrophobic and bacteriostatic surfaces, involving dual-coating with polydimethylsiloxane-normal-fluorine (PDMS-NF) or branched-fluorine (PDMS-BF) in combination with fluorinated silica nanoparticles (FSiO2 -NPs) using a spray technique. This approach has the potential to create surfaces with both water-repellent and antimicrobial properties, which could be useful in a variety of applications. It is noteworthy that the dual-coating on cotton fabric exhibited an impressive dual-scale roughness and achieved superhydrophobicity with a water contact angle of 158° and a hysteresis of less than 3°. Additionally, the coating was subjected to an ultra-high concentration of bacteria (109 CFU/mL) and was still able to inhibit more than 80 % of attachment, demonstrating its effectiveness as a bacteriostatic surface.

Design and Implementation of an Intensive Care Unit Command Center for Medical Data Fusion.

The rapid advancements in Artificial Intelligence of Things (AIoT) are pivotal for the healthcare sector, especially as the world approaches an aging society which will be reached by 2050. This paper presents an innovative AIoT-enabled data fusion system implemented at the CMUH Respiratory Intensive Care Unit (RICU) to address the high incidence of medical errors in ICUs, which are among the top three causes of mortality in healthcare facilities. ICU patients are particularly vulnerable to medical errors due to the complexity of their conditions and the critical nature of their care. We introduce a four-layer AIoT architecture designed to manage and deliver both real-time and non-real-time medical data within the CMUH-RICU. Our system demonstrates the capability to handle 22 TB of medical data annually with an average delay of 1.72 ms and a bandwidth of 65.66 Mbps. Additionally, we ensure the uninterrupted operation of the CMUH-RICU with a three-node streaming cluster (called Kafka), provided a failed node is repaired within 9 h, assuming a one-year node lifespan. A case study is presented where the AI application of acute respiratory distress syndrome (ARDS), leveraging our AIoT data fusion approach, significantly improved the medical diagnosis rate from 52.2% to 93.3% and reduced mortality from 56.5% to 39.5%. The results underscore the potential of AIoT in enhancing patient outcomes and operational efficiency in the ICU setting.

X-linked BCOR variants identified in Chinese Han patients with congenital heart disease.

BACKGROUND: Congenital heart disease (CHD) frequently manifests as a complex phenotype and approximately one-third of cases may be caused by genetic factors. BCOR, an X-linked gene encoding the corepressor of BCL6, has been demonstrated to be closely involved in human heart development. However, whether BCOR variants represent the genetic etiology underlying CHD needs further investigation. METHODS: We performed whole exome sequencing on CHD nuclear families and identified a candidate gene, BCOR, by robust bioinformatic analysis and medical literature searches. Targeted DNA sequencing of the candidate gene was conducted and then the association between variants and the risk of developing CHD was analyzed. The effects of BCOR mutations on gene expression, localization, protein interaction, and signaling pathways were evaluated in vitro. RESULTS: We identified a BCOR hemizygous missense variant (c.1448C>T, p.Pro483Leu) in a male proband presented with CHD/heterotaxy. Sanger sequencing confirmed that this variant was inherited from his asymptomatic mother. Interestingly, through literature searches, we observed another novel BCOR hemizygous missense variant (c.1619G>A, p.Arg540Gln) in a CHD patient with heterotaxy, supporting the pathogenic evidence of BCOR variants. Functional experiments conducted in vitro revealed that the variant p.Pro483Leu altered the subcellular localization of BCOR protein, disrupted its interaction with BCL6, and significantly promoted cell proliferation, whereas the variant p.Arg540Gln displayed no obvious effects. Nevertheless, transcriptional analysis revealed that down-regulation of BCOR substantially enhanced the activities of mitogen-activated protein and phosphoinositide 3-kinase-AKT signaling pathways, which are closely attributed to heart development. Targeted sequencing of 932 sporadic CHD patients enriched nine variants of BCOR predicted as likely rare and damaging and a septal defect was present in 81.8% (9/11) of them, including the two probands, which was consistent with the possible phenotype caused by BCOR defects. CONCLUSIONS: The findings of the present study indicate that variants in BCOR may predispose individuals to CHD in the Chinese Han population.

Perovskite-Nanocrystal-Doped Cellulose Nanocrystal Ligands for Electrospun Nanofibers with Excellent Stability.

Because of their exceptional physical and thermal properties, cellulose nanocrystals (CNCs) are a highly promising bio-based material for reinforcing fillers. Studies have revealed that some functional groups from CNCs can be used as a capping ligand to coordinate with metal nanoparticles or semiconductor quantum dots during the fabrication of novel complex materials. Therefore, through CNCs ligand encapsulation and electrospinning, perovskite-NC-embedded nanofibers with exceptional optical and thermal stability are demonstrated. The results indicate that, after continuous irradiation or heat cycling, the relative photoluminescence (PL) emission intensity of the CNCs-capped perovskite-NC-embedded nanofibers is maintained at ≈90%. However, the relative PL emission intensity of both ligand-free and long-alkyl-ligand-doped perovskite-NC-embedded nanofibers decrease to almost 0%. These results are attributable to the formation of specific clusters of perovskite NCs along with the CNCs structure and thermal property improvement of polymers. CNCs-doped luminous complex materials offer a promising avenue for stability-demanding optoelectronic devices and other novel optical applications.

Photon color conversion enhancement of colloidal quantum dots inserted into a subsurface laterally-extended GaN nano-porous structure in an InGaN/GaN quantum-well template.

To improve the color conversion performance, we study the nanoscale-cavity effects on the emission efficiency of a colloidal quantum dot (QD) and the Förster resonance energy transfer (FRET) from quantum well (QW) into QD in a GaN porous structure (PS). For this study, we insert green-emitting QD (GQD) and red-emitting QD (RQD) into the fabricated PSs in a GaN template and a blue-emitting QW template, and investigate the behaviors of the photoluminescence (PL) decay times and the intensity ratios of blue, green, and red lights. In the PS samples fabricated on the GaN template, we observe the efficiency enhancements of QD emission and the FRET from GQD into RQD, when compared with the samples of surface QDs, which is attributed to the nanoscale-cavity effect. In the PS samples fabricated on the QW template, the FRET from QW into QD is also enhanced. The enhanced FRET and QD emission efficiencies in a PS result in an improved color conversion performance. Because of the anisotropic PS in the sample surface plane, the polarization dependencies of QD emission and FRET are observed.

Surface plasmon coupling effects on the photon color conversion behaviors of colloidal quantum dots in a GaN nanoscale hole with a nearby quantum-well structure.

To improve color conversion performance for color display application, we study the near-field-induced nanoscale-cavity effects on the emission efficiency and Förster resonance energy transfer (FRET) under the condition of surface plasmon (SP) coupling by inserting colloidal quantum dots (QDs) and synthesized Ag nanoparticles (NPs) into surface nano-holes fabricated on a GaN template and an InGaN/GaN quantum-well (QW) template. In the QW template, the inserted Ag NPs are close to either QWs or QDs for producing three-body SP coupling to enhance color conversion. Time-resolved and continuous-wave photoluminescence (PL) behaviors of the QW- and QD-emitting lights are investigated. The comparison between the nano-hole samples and the reference samples of surface QD/Ag NP shows that the nanoscale-cavity effect of the nano-hole leads to the enhancements of QD emission, FRET between QDs, and FRET from QW into QD. The SP coupling induced by the inserted Ag NPs can enhance the QD emission and FRET from QW into QD. Its result is further enhanced through the nanoscale-cavity effect. The relative continuous-wave PL intensities among different color components also show the similar behaviors. By introducing SP coupling to a color conversion device with the FRET process in a nanoscale cavity structure, we can significantly improve the color conversion efficiency. Simulation results confirm the basic observations in experiment.

Organic-Inorganic Phenolic/POSS Hybrids Provide Highly Ordered Mesoporous Structures Templated by High Thermal Stability of PS-b-P4VP Diblock Copolymer.

Anionic living polymerization was used to prepare a diblock copolymer of poly(styrene-b-4-vinyl pyridine) (PS-b-P4VP), and a phenolic resin with a double-decker silsesquioxane (DDSQ) cage structure was used to form a phenolic/DDSQ hybrid (PDDSQ-30 with 30 wt.% DDSQ). Strong intermolecular hydrogen bonding could be confirmed through the hydroxyl (OH) groups of PDDSQ hybrid with the pyridine group of the P4VP block in PDDSQ-30/PS-b-P4VP blends based on Fourier transform infrared spectroscopy analyses, where increasing PDDSQ concentrations resulted in a higher proportion of hydrogen-bonded pyridine groups. After thermal polymerization at 180 °C, the self-assembled structures of these PDDSQ/PS-b-P4VP blends were revealed by data from small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), where the d-spacing increased with raising PDDSQ concentration. Because relatively higher thermal stability of the PDDSQ hybrid than pure phenolic resin and PS-b-P4VP template, we can obtain the long ranger order of mesoporous PDDSQ hybrids after removing the PS-b-P4VP template, which reveals the high surface area and high pore volume with cylindrical and spherical structures corresponding to the PDDSQ compositions that are rarely observed by using pure phenolic resin as the matrix and could be used in supercapacitor application.

Highly Thermally Stable, Reversible, and Flexible Main Chain Type Benzoxazine Hybrid Incorporating Both Polydimethylsiloxane and Double-Decker Shaped Polyhedral Silsesquioxane Units through Diels-Alder Reaction.

This work synthesizes a new bifunctional furan derivative (PDMS-FBZ) through a sequence of hydrosilylation of nadic anhydride (ND) with polydimethylsiloxane (PDMS), reaction of the product with p-aminophenol to form PDMS-ND-OH, and its subsequent Mannich reaction with furfurylamine and CH2 O. Then, the main chain-type copolymer PDMS-DABZ-DDSQ is prepared through a Diels-Alder (DA) cycloaddition of PDMS-FBZ with the bismaleimide-functionalized double-decker silsesquioxane derivative DDSQ-BMI. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy confirm the structure of this PDMS-DABZ-DDSQ copolymer; differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) reveal it to have high flexibility and high thermal stability (Tg = 177 °C; Td10 = 441 °C; char yield = 60.1 wt%); contact angle measurements reveal a low surface free energy (18.18 mJ m-2 ) after thermal ring-opening polymerization, because the inorganic PDMS and DDSQ units are dispersed well, as revealed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). This PDMS-DABZ-DDSQ copolymer possesses reversible properties arising from the DA and retro-DA reactions, suggesting its possible application as a functional high-performance material.

Reciprocal Regulation of Peroxisome Biogenesis and Myogenic Factors Is Critical for Myogenesis.

Mitochondria (MITO) and peroxisomes (PEXO) are the major organelles involved in the oxidative metabolism of cells, but detailed examination of their dynamics and functional adaptations during skeletal muscle (SKM) development (myogenesis) is still lacking. In this study, we found that during myogenesis, MITO DNA, ROS level, and redox ratio increased in myotubes, but the membrane potential (Δψm) and ATP content reduced, implying that the MITO efficiency might reduce during myogenesis. The PEXO number and density both increased during myogenesis, which probably resulted from the accumulation and increased biogenesis of PEXO. The expression of PEXO biogenesis factors was induced during myogenesis in vitro and in utero, and their promoters were also activated by MyoD. Knockdown of the biogenesis factors Pex3 repressed not only the PEXO density and functions but also the levels of MITO genes and functions, suggesting a close coupling between PEXO biogenesis and MITO functions. Surprisingly, Pex3 knockdown by the CRISPRi system repressed myogenic differentiation, indicating critical involvement of PEXO biogenesis in myogenesis. Taken together, these observations suggest that the dynamics and functions of both MITO and PEXO are coupled with each other and with the metabolic changes that occur during myogenesis, and these metabolic couplings are critical to myogenesis.

Robot-Assisted Kyphoplasty versus Fluoroscopy-Assisted Kyphoplasty: A Meta-Analysis of Postoperative Outcomes.

Osteoporotic vertebral compression fractures are the most common manifestation of osteoporosis. Percutaneous kyphoplasty (PKP) can lead to both pain improvement and correction of kyphosis secondary to collapsed vertebral bodies. Robot-assisted (RA) PKP has been reported to provide better vertebral body fracture correction than conventional fluoroscopy-assisted (FA) PKP. The aim of this meta-analysis is to compare clinical outcomes of RA PKP versus FA PKP. The Pubmed, Embase, and MEDLINE electronic databases were searched from January 1900 to December 2022, with no language restrictions for relevant articles. We extracted the preoperative and postoperative mean pain score and standard deviation from the included studies and pooled them using an inverse variance method. Statistical analyses were performed using functions available in the metafor package in R software. The results of this meta-analysis were summarized with weighted mean differences (WMDs). Our search strategy identified 181 references from the Pubmed, Embase, and MEDLINE electronic databases. We excluded duplicates and irrelevant references, after screening titles and abstracts. The remaining 12 studies were retrieved for full-text review, and, finally, we included five retrospective cohort studies from 2015 to 2021, comprising 223 patients undergoing RA PKP and 246 patients undergoing FA PKP. No difference was found in subgroup analysis based on the timing of postoperative pain assessment, despite the overall estimate of postoperative pain indicating a significant difference between the RA PKP and FA PKP groups (WMD, -0.22; 95% CI, -0.39 to -0.05). The long-term pain assessment revealed a significantly lower VAS in the RA PKP group than the FA PKP group at six months postoperatively (WMD, -0.15; 95% CI, -0.30 to -0.01), but no difference between the subgroups at three (WMD, 0.06; 95% CI, -0.41 to -0.54) and twelve months (WMD, -0.10; 95% CI, -0.50 to 0.30) postoperatively. Our meta-analysis revealed no significant difference in postoperative pain between RA PKP and FA PKP. Patients undergoing RA PKP had better pain improvement compared to FA PKP at 6 months postoperatively. However, further studies focusing on long-term outcomes in patients undergoing RA PKP are warranted to clarify its benefit, given the small number of included studies.

The necessity of a loading dose when prescribing intravenous colistin in critically ill patients with CRGNB-associated pneumonia: a multi-center observational study.

BACKGROUND: The importance or necessity of a loading dose when prescribing intravenous colistin has not been well established in clinical practice, and approximate one-third to half of patients with carbapenem-resistant gram-negative bacteria (CRGNB) infection did not receive the administration of a loading dose. The aim of this study is to investigate the efficacy and risk of acute kidney injury when prescribing intravenous colistin for critically ill patients with nosocomial pneumonia caused by CRGNB. METHODS: This was a multicenter, retrospective study that recruited ICU-admitted patients who had CRGNB-associated nosocomial pneumonia and were treated with intravenous colistin. Then, we classified the patients into colistin loading dose (N = 85) and nonloading dose groups (N = 127). After propensity-score matching for important covariates, we compared the mortality rate, clinical outcome and microbiological eradication rates between the groups (N = 67). RESULTS: The loading group had higher percentages of patients with favorable clinical outcomes (55.2% and 35.8%, p = 0.037) and microbiological eradication rates (50% and 27.3%, p = 0.042) at day 14 than the nonloading group. The mortality rates at days 7, 14 and 28 and overall in-hospital mortality were not different between the two groups, but the Kaplan-Meier analysis showed that the loading group had a longer survival time than the nonloading group. Furthermore, the loading group had a shorter length of hospital stay than the nonloading group (52 and 60, p = 0.037). Regarding nephrotoxicity, there was no significant difference in the risk of developing acute kidney injury between the groups. CONCLUSIONS: The administration of a loading dose is recommended when prescribing intravenous colistin for critically ill patients with nosocomial pneumonia caused by CRGNB.

Using real-time visualization system for data-driven decision support to achieve lung protective strategy: a retrospective observational study.

BACKGROUND: Although lung protective strategy and adjunctive intervention are associated with improved survival in patients with acute respiratory distress syndrome (ARDS), the implementation of effective therapies remains low. This study aimed to evaluate whether the use of business intelligence (BI) for real-time data visualization is associated with an improvement in lung protective strategy and adjunctive therapy. METHODS: A retrospective observational cohort study was conducted on patients with ARDS admitted between September 2020 and June 2021 at two intensive care units (ICUs) of a tertiary referral hospital in Taiwan. BI was imported for data visualization and integration to assist in clinical decision in one of the ICUs. The primary outcomes were the implementation of low tidal volume ventilation (defined as tidal volume/predicted body weight ≤ 8 mL/kg) within 24 h from ARDS onset. The secondary outcomes included ICU and hospital mortality rates. RESULTS: Among the 1201 patients admitted to the ICUs during the study period, 148 (12.3%) fulfilled the ARDS criteria, with 86 patients in the BI-assisted group and 62 patients in the standard-of-care (SOC) group. Disease severity was similar between the two groups. The application of low tidal volume ventilation strategy was significantly improved in the BI-assisted group compared with that in the SOC group (79.1% vs. 61.3%, p = 0.018). Despite their ARDS and disease severity, the BI-assisted group tended to achieve low tidal volume ventilation. The ICU and hospital mortality were lower in the BI-assisted group. CONCLUSIONS: The use of real-time visualization system for data-driven decision support was associated with significantly improved compliance to low tidal volume ventilation strategy, which enhanced the outcomes of patients with ARDS in the ICU.

Functional analysis of HECA variants identified in congenital heart disease in the Chinese population.

BACKGROUND: Congenital heart disease (CHD) is a class of cardiovascular defects that includes septal defects, outflow tract abnormalities, and valve defects. Human homolog of Drosophila headcase (HECA) is a novel cell cycle regulator whose role in CHD has not been elucidated. This is the first study to determine the frequency of HECA mutations in patients with CHD and the association between HECA variants and CHD. METHODS: In this study, we identified a candidate gene, HECA, by whole-exome sequencing of an atrial septal defect family. To investigate the association between HECA variants and CHD risk, targeted exon sequencing was conducted in 689 individuals with sporadic CHD. We further analyzed the effect of HECA gene abnormalities on cardiomyocyte phenotype behavior and related signaling pathways by Western blotting, reverse transcription-quantitative polymerase chain reaction, and scratch assay. RESULTS: We found a novel de novo mutation, c.409_410insA (p. W137fs), in the HECA gene and identified five rare deleterious variants that met the filtering criteria in 689 individuals with sporadic CHD. Fisher's exact test revealed a significant association between HECA variations and CHD compared with those in gnomADv2-East Asians(p = 0.0027). Further functional analysis suggested that the variant p. W137fs resulted in a deficiency of the normal HECA protein, and HECA deficiency altered AC16 cell cycle progression, increased cell proliferation, and migration, and promoted the activation of the PDGF-BB/PDGFRB/AKT pathway. CONCLUSIONS: Our study identified HECA and its six rare variants, expanding the spectrum of genes associated with CHD pathogenesis in the Chinese population.

Surfactin induces ER stress-mediated apoptosis via IRE1-ASK1-JNK signaling in human osteosarcoma.

Osteosarcoma, one of primary bone tumor in children and young adults, has poor prognosis and drug resistances to chemotherapy. In order to reinforce the conventional therapies and antagonize the osteosarcoma in patients, a novel strategy is required for developing a new treatment. In this study, surfactin, a natural product from Bacillus subtilis, showed the efficiency of cell death in osteosarcoma, but not in normal cells. Surfactin triggers ER stress mechanism by promoting the aberrant Ca2+ release from ER lumen and ER-signaling to mitochondrial dysfunction following caspases activation mediating cell apoptosis. Surfactin-induced ER stress not only upregulated of glucose-regulated protein 78/94 and IRE1-ASK1-JNK pathway but also leading to calpains and Bcl-2 proteins family involving the release of cytochrome c. The releases into cytosol trigger the cleavage of caspase-9 and caspase-3 to induce cell apoptosis. In this study, surfactin demonstrated the potential functions to trigger the ER stress, ER stress-associated IRE1-ASK1-JNK signaling pathway, mitochondrial dysfunction, and caspase activations leading to programmed cell apoptosis. Importantly, implicating the signaling pathway that regulates the connection between ER stress and mitochondrial dysfunction causing apoptosis associated with surfactin. These results indicated a potential application of surfactin strengthen current conventional therapies.

Complications following all-inside anterior cruciate ligament reconstruction.

PURPOSE: We conducted a comprehensive analysis of possible perioperative complications following all-inside anterior cruciate ligament reconstruction (ACLR). Additional techniques and tips are proposed to prevent and manage complications. METHODS: Complications following all-inside ACLR performed between December 2015 and December 2020 were retrospectively analysed. Altogether, 348 operations were performed and 275 patients were enrolled with a minimum 12-month follow-up period. Only semitendinosus autograft was utilised in most patients, and semitendinosus-gracilis autograft and allograft were used in five and 31 patients, respectively. Simultaneous meniscal repair, partial meniscectomy, and chondral surgery were performed in 29.5%, 21.1%, and 4.4% of patients, respectively. Complications were observed based on the patient's clinical condition, plain film, and magnetic resonance imaging. Clinical outcomes were assessed pre-operatively and at 12 months post-operatively, using the International Knee Documentation Committee form, Lysholm and Tegner activity scores, and KT1000 side-to-side difference. RESULTS: Intraoperative and post-operative complications developed in 65 patients (23.6%). The most common complication was cortical button malposition on the femoral side (19.3%). Intra-operative breakage of the retrograde drill was found in two cases (0.73%), with three cases (1.1%) of over-drilling with destruction of the outer cortex. Post-operatively, four (1.5%), 13 (4.7%), and 16 (5.8%) cases of infection, full-thickness re-rupture, and loss of extension, respectively, were recorded. Functional outcome scales showed significant post-operative improvement. CONCLUSION: Cortical button malposition was the most common but easily preventable complication. All-inside ACLR could be safe and promising after the suggested additional operative techniques and proper perioperative management which decrease complication rates and improve favourable outcomes.

High Thermal Resistance of Epoxy/Cyanate Ester Hybrids Incorporating an Inorganic Double-Decker-Shaped Polyhedral Silsesquioxane Nanomaterial.

In this study, we prepared a difunctionalized cyanate ester double-decker silsesquioxane (DDSQ-OCN) cage with a char yield and thermal decomposition temperature (Td) which were both much higher than those of a typical bisphenol A dicyanate ester (BADCy, without the DDSQ cage) after thermal polymerization. Here, the inorganic DDSQ nanomaterial improved the thermal behavior through a nano-reinforcement effect. Blending the inorganic DDSQ-OCN cage into the epoxy resin improved its thermal and mechanical stabilities after the ring-opening polymerization of the epoxy units during thermal polymerization. The enhancement in the physical properties arose from the copolymerization of the epoxy and OCN units to form the organic/inorganic covalently bonded network structure, as well as the hydrogen bonding of the OH groups of the epoxy with the SiOSi moieties of the DDSQ units. For example, the epoxy/DDSQ-OCN = 1/1 hybrid, prepared without Cu(II)-acac as a catalyst, exhibited a glass transition temperature, thermal decomposition temperature (Td), and char yield (166 °C, 427 °C, and 51.0 wt%, respectively) that were significantly higher than those obtained when applying typical organic curing agents in the epoxy resin. The addition of Cu(II)-acac into the epoxy/BADCy and epoxy/DDSQ-OCN hybrids decreased the thermal stability (as characterized by the values of Td and the char yields) because the crosslinking density and post-hardening also decreased during thermal polymerization; nevertheless, it accelerated the thermal polymerization to a lower curing peak temperature, which is potentially useful for real applications as epoxy molding compounds.

Resistin enhances IL-1ß and TNF-α expression in human osteoarthritis synovial fibroblasts by inhibiting miR-149 expression via the MEK and ERK pathways.

Resistin is a cysteine-rich adipokine that promotes the release of inflammatory cytokines, particularly interleukin 1 beta (IL-1ß) and tumor necrosis factor alpha (TNF-α), which are critical pro-inflammatory mediators in osteoarthritis (OA) pathogenesis. We describe evidence of significantly higher levels of resistin, IL-1ß, and TNF-α expression in OA knee synovial tissue compared with that from non-OA knees. Resistin-induced enhancement of IL-1ß and TNF-α expression in human OA synovial fibroblasts (OASFs) were attenuated by MEK and ERK inhibitors, as well as their respective siRNAs. Our data reveal that resistin enhances the expression of TNF-α and IL-1ß in OASFs by inhibiting miR-149 expression via MEK and ERK signaling. Our findings elucidate the inter-relationships between resistin and pro-inflammatory mediators during OA pathogenesis and could help to facilitate the development of synovium-targeted therapy in OA.

Structure-Property Relationships of Inorganic-Organic Hybrid Semiconducting Se-Fe-Cu-CO Polymers.

A novel family of inorganic-organic-hybrid SeFe3(CO)9-dipyridyl two- and one-dimensional Cu polymers was synthesized via the three-component liquid-assisted grinding (LAG) of [Cu(MeCN)4]+, inorganic cluster [SeFe3(CO)9]2- (1), and rigid conjugated dipyridyls 4,4'-dipyridyl (dpy) and 1,2-bis(4-pyridyl)ethylene (bpee) or flexible conjugation-interrupted dipyridyls 1,2-bis(4-pyridyl)ethane (bpea) and 1,3-bis(4-pyridyl)propane (bpp). They included a cluster-linked 2D polymer, [(µ4-Se)Fe3(CO)9Cu2(MeCN)(dpy)1.5]n (1-dpy-2D), a cluster-pendant 1D chain, [(µ3-Se)Fe3(CO)9Cu2(dpy)3]n (1-dpy-1D), cluster-blocked 1D polymers, [(µ3-Se)Fe3(CO)9Cu2(L)]n (1-L-1D, L = bpee, bpea), and a cluster-linked 2D polymer, [(µ4-Se)Fe3(CO)9Cu2(bpp)2]n (1-bpp-2D). The reversible dimensionality transformations of these three types of polymers accompanied by the change in coordination modes of 1 were achieved by the LAG addition of 1/[Cu(MeCN)4]+ or dipyridyl ligands. These polymers were found to possess tunable low-energy gaps (1.49-1.72 eV) that increased in the order regarding their structural features: cluster-linked 1-dpy-2D and 1-bpp-2D, cluster-blocked 1-bpea-1D and 1-bpee-1D, and cluster-pendant 1-dpy-1D and [(µ3-Se)Fe3(CO)9Cu2(L)2.5]n (L = bpee, 1-bpee-2D; bpea, 1-bpea-2D), indicative of the importance of the participation of cluster 1. The measured electrical conductivities of 1-bpp-2D, 1-bpea-1D, and 1-dpy-1D were 3.13 × 10-7, 2.92 × 10-7, and 2.30 × 10-7 S·cm-1, respectively, which were parallel for the trend in their energy gaps, revealing semiconducting behaviors, supported by XPS, XANES, and DFT calculations. The surprising semiconductivity of the conjugation-interrupted bpp-linked 1-bpp-2D was mainly ascribed to electron transport via C-H···O(carbonyl) hydrogen bonds and aromatic C-H···π contacts within its closely packed 2D layers. Water-/light-stable polymers 1-bpp-2D, 1-bpea-2D, and 1-dpy-1D were also demonstrated to exhibit excellent pseudo-first-order photodegradation toward nitroaromatics and organic dyes, where cluster-linked polymer 1-bpp-2D performed the best, as predicted by its structural features and narrow energy gap.

Mesoporous Organic/Inorganic Hybrid Materials with Frank-Kasper Phases Templated by an Unusual Linear Symmetry Diblock Copolymer.

In this study the authors used an unusual linear symmetric poly(ethylene oxide-b-caprolactone) (PEO-b-PCL) diblock copolymer as a template within phenolic/double-decker silsesquioxane (DDSQ) hybrids to synthesize mesoporous phenolic/DDSQ materials having Frank-Kasper (FK) phases (e.g., σ, A15, H, and Z phases). These FK structures are the first to have been prepared using a block copolymer and the first to exist in mesoporous materials. The authors' mesoporous carbon/DDSQ hybrids displayed high capacitance (764 F g-1 at a current of 0.5 A g-1 and 98.4% capacitance retention over 2000 cycles), arising from their high surface areas, high pore volumes, and tunable concentrations of N, O, and Si heteroatoms.