RESUMO
CsPbBr3 perovskite quantum dots (QDs) show great potential in various applications due to their size-dependent and excellent optoelectronic properties. However, it is still challenging to synthesize size-tunable CsPbBr3 QDs with purple emission. Herein, CsPbBr3 nanospheres (NS) with purple emission (432 nm) and wavelength-tunable photoluminescence were synthesized using a two-step recrystallization method for the first time. A nanocube (NC) strategy resulting from CsPbBr3 nanosphere self-assembly via polar solvent-induced surface ligand mismatch was proposed. The self-assembly process endows the QDs with wavelength-tunable photoluminescence ranging from 432 to 518 nm. The significant reduction in defects during self-assembly was confirmed by transient optical spectroscopy measurements, photoluminescence quantum yields (PLQY), and the disappearance of tail bands in the long-wavelength region of the photoluminescence (PL) spectrum. This theory demonstrated that the decrease in high defect surfaces and increase in specific surface area were the reasons for the decline in defects. Most importantly, these QDs could be used for the active jamming of optical imaging systems based on charged-coupled devices (CCDs), including laser imaging radar and low light level (LLL) night vision systems. QDs significantly increase the mean square error (MSE) of the image, while the detection rate of the target by the artificial intelligence algorithm decreased by 95.17%. The wide wavelength tunable emission caused by structural changes makes it arduous for silicon-based detectors to avoid the interference of QDs by adding filters or by other means.
RESUMO
Flower-like metallic nanocrystals have shown great potential in the fields of nanophononics and energy conversion owing to their unique optical properties and particular structures. Herein, colloid Au nanoflowers with different numbers of petals were prepared by a steerable template process. The structure-adjustable Au nanoflowers possessed double plasmon resonances, tunable electric fields, and greatly enhanced SERS and photocatalytic activity. In the extinction spectra, Au nanoflowers had a strong electric dipole resonance located around 530 to 550 nm. Meanwhile, a longitudinal plasmon resonance (730~760 nm) was obtained when the number of petals of Au nanoflowers increased to two or more. Numerical simulations verified that the strong electric fields of Au nanoflowers were located at the interface between the Au nanosphere and Au nanopetals, caused by the strong plasmon coupling. They could be further tuned by adding more Au nanopetals. Meanwhile, much stronger electric fields of Au nanoflowers with two or more petals were identified under longitudinal plasmon excitation. With these characteristics, Au nanoflowers showed excellent SERS and photocatalytic performances, which were highly dependent on the number of petals. Four-petal Au nanoflowers possessed the highest SERS activity on detecting Rhodamine B (excited both at 532 and 785 nm) and the strongest photocatalytic activity toward photodegrading methylene blue under visible light irradiation, caused by the strong multi-interfacial plasmon coupling and longitudinal plasmon resonance.
RESUMO
Metal/semiconductor hybrids show potential application in fields of surface-enhanced Raman spectroscopy (SERS) and photocatalysis due to their excellent light absorption, electric field, and charge-transfer properties. Herein, a WO3-Au metal/semiconductor hybrid, which was a WO3 nanobrick decorated with Au nanoparticles, was prepared via a facile hydrothermal method. The WO3-Au hybrids show excellent visible light absorption, strong plasmon coupling, high-performance SERS, and good photocatalytic activity. In particular, on sensing rhodamine B (RhB) under 532 nm excitation, bare WO3 nanobricks have a Raman enhancement factor of 2.0 × 106 and a limit of detection of 10-8 M due to the charger-transfer property and abundant oxygen vacancies. WO3-Au metal/semiconductor hybrids display a largely improved Raman enhancement factor compared to pure Au and WO3 components owing to the synergistic effect of electromagnetic enhancement and charge transfer. The Raman enhancement factor and limit of detection are further improved, reaching 5.3 × 108 and 10-12 M, respectively, on increasing the content of Au to 2.1 wt %, owing to the strong plasmon coupling between the Au nanoparticles. Additionally, the WO3-Au hybrids also exhibit excellent photocatalytic activity toward degradation of RhB under visible light irradiation. WO3-Au (2.1 wt %) possesses the fastest photocatalytic rate, which is 6.1 and 2.0 times that of pure WO3 nanobricks and commercial P25, respectively. The enhanced photocatalytic activity is attributed to the strong plasmon coupling and the efficient charge transfer between Au and WO3 nanobricks. The as-prepared materials show great potential in detecting and degrading pollutants in environmental treatment.
RESUMO
Au nanoingots, on which an Au nanosphere is accurately placed in an open Au shell, are synthesized through a controllable hydrothermal method. The prepared Au nanoingots exhibit an adjustable cavity structure, strong plasmon coupling, tunable magnetic plasmon resonance, and prominent photocatalytic and SERS performances. Au nanoingots exhibit two resonance peaks in the extinction spectrum, one (around 550 nm) is ascribed to electric dipole resonance coming from the central Au, and the other one (650-800 nm) is ascribed to the magnetic dipole resonance originating from the open Au shell. Numerical simulations verify that the intense electric and magnetic fields locate in the bowl-shaped nanogap between the Au nanosphere and shell, and they can be further optimized by changing the size of the outer Au shell. Au nanoingots with the largest shell have the strongest electric field because of large-area plasmon coupling, while Au nanoingots with the largest shell opening size have the strongest magnetic field. As a result, the structure-adjustable Au nanoingots show a high tunability and enhancement of catalytic reduction of p-nitrophenol and SERS detection of Rhodamine B. Specially, Au nanoingots with the largest shell size exhibit the highest catalytic activity and Raman signals at 532 nm excitation. However, Au nanoingots with the largest shell opening size have the highest photocatalytic activity with light irradiation (λ > 420 nm) and exhibit the best SERS performance at 785 nm excitation.
RESUMO
Plasmon coupling induced intense light absorption and near-field enhancement have vast potential for high-efficiency photocatalytic applications. Herein, (Au/AgAu)@CdS core-shell hybrids with strong multi-interfacial plasmon coupling were prepared through a convenient strategy for efficient photocatalytic hydrogen generation. Bimetallic Au/AgAu cores with an adjustable number of nanogaps (from one to four) were primarily synthesized by well-controlled multi-cycle galvanic replacement and overgrowth processes. Extinction tests and numerical simulations synergistically revealed that the multigap Au/AgAu hybrids possess a gap-dependent light absorption region and a local electric field owing to the multigap-induced multi-interfacial plasmon coupling. With these characteristics, hetero-photocatalysts prepared by further coating of CdS shells on multigap Au/AgAu cores exhibited a prominent gap-dependent photocatalytic hydrogen production activity from water splitting under light irradiation (λ > 420 nm). It is found that the hydrogen generation rates of multigap (Au/AgAu)@CdS have an exponential improvement compared with that of pure CdS as the number of nanogaps increases. In particular, four-gap (Au/AgAu)@CdS core-shell catalysts displayed the highest hydrogen generation rate, that is 96.1 and 47.2 times those of pure CdS and gapless Au@CdS core-shell hybrids. These improvements can be ascribed to the strong plasmon absorption and near-field enhancement induced by the multi-interfacial plasmon coupling, which can greatly improve the light-harvesting efficiency, offer more plasmonic energy, and boost the generation and separation of electron-hole pairs in the multigap catalysts.
RESUMO
The temporal-spatial characteristics of the tropospheric column NO2 (TroNO2) and total column NO2 (TotNO2) over Hainan Island are analyzed using remote sensing data derived from OMI sensor, and also combining surface wind, SO2, HYSPLIT model to research the source of atmospheric pollutants over Hainan Island. The results show that: The value of NO2 in northern area is higher than that in southern area, and the value of NO, in central mountainous area is lower than those other places. In addition, the seasonal variation of NO2 indicates that NO2 is higher in winter and lower in summer, which can be attributed to precipitation in summer and external transport of atmospheric pollutants in winter. Long-term changes of NO2 in Hainan Island appear opposite trends during winter and summer, which is declining in winter and has a weak increase in summer. The reasonable explanation is that local emissions of pollutants play an important role in summer, but external transport is the main resource of pollutants over Hainan Island. The TroNO2 in Haikou City has a good relationship with favorable delivered days in PRD, the correlation coefficient is 0.84 with 99% confidence level. Moreover, there are 3 transport paths in Dec. 2013 which can impact Haikou City from backward trajectory analysis, but all of them pass through the PRD, which can further prove that atmospheric pollutants of Hainan Island in winter are mainly delivery from PRD region.