Repair of dentin defects from DSPP knockout mice by PILP mineralization.

Dentinogenesis imperfecta type II (DGI-II) lacks intrafibrillar mineral with severe compromise of dentin mechanical properties. A Dspp knockout (Dspp-/-) mouse, with a phenotype similar to that of human DGI-II, was used to determine if poly-L-aspartic acid [poly(ASP)] in the "polymer-induced liquid-precursor" (PILP) system can restore its mechanical properties. Dentin from six-week old Dspp-/- and wild-type mice was treated with CaP solution containing poly(ASP) for up to 14 days. Elastic modulus and hardness before and after treatment were correlated with mineralization from Micro x-ray computed tomography (Micro-XCT). Transmission electron microscopy (TEM)/Selected area electron diffraction (SAED) were used to compare matrix mineralization and crystallography. Mechanical properties of the Dspp-/- dentin were significantly less than wild-type dentin and recovered significantly (P < 0.05) after PILP-treatment, reaching values comparable to wild-type dentin. Micro-XCT showed mineral recovery similar to wild-type dentin after PILP-treatment. TEM/SAED showed repair of patchy mineralization and complete mineralization of defective dentin. This approach may lead to new strategies for hard tissue repair.

CO Emission from an Impinging Non-Premixed Flame.

Carbon monoxide (CO) results from the incomplete oxidation of hydrocarbon fuels. While CO can be desirable in some syngas processes, it is a dangerous emission from fires, gas heaters, gas stoves, or furnaces where insufficient oxygen in the core reaction prevents complete oxidation of fuel to carbon dioxide and water, particularly when the reaction is interrupted by interaction with relatively cool solid boundaries. This research examines the physico-thermo-chemical processes responsible for carbon monoxide release from a small laminar non-premixed methane/air flame impinging on a nearby surface. We measure the changes in CO emission as correlated with variations in flame structure observed using planar laser induced fluorescence (PLIF of OH and 2-photon CO), and two-line OH PLIF thermometry, as a function of burner-to-plate distance. In particular, this work combines the use of OH and CO PLIF, and PLIF thermometry to describe the relative locations of the CO rich region, the peak heat release zone as indicated by chemiluminescence and OH gradients, and the extended oxidative zone in the impinging flames. The results show that CO release correlates strongly with stagnating flow-driven changes in the location and extent of high concentration regions of OH in surface-impinging diffusion flames.

Investigation of the combustion kinetics and polycyclic aromatic hydrocarbon emissions from polycaprolactone combustion.

Polycaprolactone (PCL) is one of the most attractive biodegradable plastics that has been widely used in medicine and agriculture fields. Because of the large increase in biodegradable plastics usage, the production of waste biodegradable plastics will be increasing dramatically, producing a growing environmental problem. Generally, waste PCL is collected along with municipal solid wastes and then incinerated. This study investigates the combustion kinetics and emission factors of 16 US Environmental Protection Agency (EPA) priority polycyclic aromatic hydrocarbons (PAHs) in the PCL combustion. Experimentally, two reactions are involved in the PCL combustion process, possibly resulting in the emission of carbon dioxide, propanal, protonated caprolactone and very small amounts of PAH produced by incomplete combustion. The intermediate products may continuously be oxidized to form CO2. The emission factors for 16 US EPA priority PAHs are n.d. -2.95 microg/g, which are much lower than those of poly lactic acid and other plastics combustion. The conversion of PCL is 100%. Results from this work suggest that combustion is a good choice for the waste PCL disposal.

Ultrastructure of avian eggshell during resorption following egg fertilization.

For skeletal mineralization, the avian embryo mobilizes calcium from its calcitic eggshell. This occurs through dissolution of specific interior regions of the shell in a process that also weakens the shell to allow hatching. Here, we have examined eggshell ultrastructure during dissolution occurring between laying of a fertilized egg (with incubation) and hatching of the chick (Gallus gallus). We have focused on changes in shell mammillae where the majority of dissolution takes place. Using scanning electron microscopy, we describe differences in matrix-mineral structure and relationships not observed in unfertilized eggs (unresorbed eggshell). We document changes in the calcium reserve body - an essential sub-compartment of mammillae - consistent with it being an early, primary source of calcium essential for embryonic skeletal growth. Dissolution events occurring in the calcium reserve sac and in the base plate of the calcium reserve body, and similar changes in surrounding bulk mammillae structure, all correlate with advancing skeletal embryonic calcification. The changes in mammillae sub-structures can generally be characterized as mineral dissolutions revealing fine surface topographies on remaining mineral surfaces and the exposure of an extensive, intracrystalline (occluded) organic matrix network. We propose that this mineral-occluded network regulates how shell mineral is dissolved by providing dissolution channels facilitating calcium release for the embryonic skeleton.

Avian eggshell structure and osteopontin.

The avian eggshell primarily consists of calcium carbonate mineral (calcite) and matrix proteins. Here we review matrix-mineral relationships in the eggshell at the ultrastructural level using scanning and transmission electron microscopy, and describe the distribution of osteopontin (OPN) as determined by colloidal gold immunolabeling for OPN. A rich protein network integrated within the calcitic structure of the eggshell shows variable, region-specific organization that included layered fibrous planar sheets of matrix, thin filamentous threads, thin film-like surface coatings, vesicular structures and isolated proteins residing on cleaved {104} crystallographic faces of the eggshell calcite. Except for the vesicular structures, these matrix structures all immunolabeled strongly for OPN. Given the potent mineralization- inhibiting function of OPN, we discuss how this protein might regulate eggshell growth rate and inhibit calcification at specific compartmental boundaries to provide eggshell form.

Identification of physical parameters controlling the dominance of algal species in a subtropical reservoir.

Eutrophication is a serious problem of water resource management in Taiwan. The occurrence of annoying algal species as well as abnormally abundant algal mass threatens the quality of water supply. The growth and decline of a specific phytoplankton species are affected by environmental factors, including light, nutrients, temperature, etc. There have been many investigations on the effects of individual factors on the abundance and composition of algal populations. However, many analyses on the effects of environmental factors, especially the concentration of nutrients, on phytoplankton failed to identify the controlling factors on the dynamic change of the phytoplankton species. This study used statistical methods to isolate the effect of seasons on the phytoplankton growth and searched for the relationships between the nutrient concentrations and the abundance of different algal species in Feitsui Reservoir based on the data obtained from 1995 to 2003. We found that the dynamic change of dominance of some species of phytoplankton was strongly related to the seasonal factors. The controlling factors of the survival of an algal species were the settling and mobility of the phytoplankton, the mixing depth and the vertical mixing strength of the water bodies. According to our preliminary findings, the influence of physical factors, varying seasonally, outweighs the influence of nutrients on the algal species composition in Feitsui Reservoir in Taiwan.

Ultrastructural matrix-mineral relationships in avian eggshell, and effects of osteopontin on calcite growth in vitro.

We investigated matrix-mineral relationships in the avian eggshell at the ultrastructural level using scanning and transmission electron microscopy combined with surface-etching techniques to selectively increase topography at the matrix-mineral interface. Moreover, we investigated the distribution of osteopontin (OPN) in the eggshell by colloidal-gold immunolabeling for OPN, and assessed the effects of this protein on calcite crystal growth in vitro. An extensive organic matrix network was observed within the calcitic structure of the eggshell that showed variable, region-specific organization including lamellar sheets of matrix, interconnected fine filamentous threads, thin film-like surface coatings of proteins, granules, vesicles, and isolated proteins residing preferentially on internal {104} crystallographic faces of fractured eggshell calcite. With the exception of the vesicles and granules, these matrix structures all were immunolabeled for OPN, as were occluded proteins on the {104} calcite faces. OPN inhibited calcite growth in vitro at the {104} crystallographic faces producing altered crystal morphology and circular growth step topography at the crystal surface resembling spherical voids in mineral continuity prominent in the palisades region of the eggshell. In conclusion, calcite-occluded and interfacial proteins such as OPN likely regulate eggshell growth by inhibiting calcite growth at specific crystallographic faces and compartmental boundaries to create a biomineralized architecture whose structure provides for the properties and functions of the eggshell.

Photocatalytic decomposition of CCl4 on Zr-MCM-41.

Photocatalytic decomposition of CCl4 (80 mg L(-1) in H2O) effected by Zr-MCM-41 (Zr incorporated in the amorphous wall of MCM-41) has been studied in the present work. Experimentally, photocatalytic decomposition of CCl4 on Zr-MCM-41 was enhanced by about 1.96 times over that on ZrO2. Photocatalytic decomposition of CCl4 may proceed via a two-electron transfer process that yields mainly CHCl3, Cl- and H2. Since little C2Cl2, C2Cl6 or CH2Cl2 was found, it is unlikely that CHCl3 involved in the secondary photocatalytic degradation process. In addition, photocatalytic splitting of H2O on Zr-MCM-41 was also enhanced. The yield of H2 was 6.5 mmol(gZrO2)(-1). About 68% of this hydrogen (6.5 mmol(gZrO2)(-1)) was consumed in the photocatalytic decomposition of CCl4.

Recovery after PILP remineralization of dentin lesions created with two cariogenic acids.

OBJECTIVES: Acetate and lactate are important cariogenic acids produced by oral bacteria. They produced different residual dentin structures in artificial lesions of similar depth. We evaluated if such lesions responded in the same way to a polymer-induced-liquid-precursor (PILP) remineralization. DESIGN: Dentin blocks obtained from human third molars, divided into 6 groups (n=3). Blocks were demineralized with acetate (66h) or lactate (168h) buffer at pH 5.0 to create 140µm target lesion depths. A-DEM and L-DEM groups received no remineralization. Other groups were remineralized for 14days. 100µg/mL polyaspartate was added into the remineralizing buffer for A-PIL and L-PIL, whereas A-CAP and L-CAP were treated with the same solution but without polyaspartate. Cross-sectioned blocks were examined for shrinkage and AFM-topography. Line profiles of reduced elastic modulus (Er) were obtained by AFM-based nanoindentation across the lesion. Ultrastructures were examined with TEM. RESULTS: A-PIL and L-PIL recovered in shrinkage to the original height of the dentin and it appeared normal with tubules, with increases in Er at both outer flat and inner sloped zones. At the sloped zone, acetate lesions lost more Er but recovery rate after PILP was not statistically different from lactate lesions. A-CAP and L-CAP showed surface precipitates, significantly less recovery in shrinkage or Er as compared to PILP groups. TEM-ultrastructure of PILP groups showed similar structural and mineral components in the sloped zone for lesions produced by either acid. CONCLUSIONS: The PILP process provided significant recovery of both structure and mechanical properties for artificial lesions produced with acetate or lactate.

Distinct decalcification process of dentin by different cariogenic organic acids: Kinetics, ultrastructure and mechanical properties.

OBJECTIVES: We studied artificial dentin lesions in human teeth generated by lactate and acetate buffers (pH 5.0), the two most abundant acids in caries. The objective of this study was to determine differences in mechanical properties, mineral density profiles and ultrastructural variations of two different artificial lesions with the same approximate depth. METHODS: 0.05M (pH 5.0) acetate or lactate buffer was used to create 1) 180µm-deep lesions in non-carious human dentin blocks (acetate 130h; lactate 14days); (2) demineralized, ∼180µm-thick non-carious dentin discs (3 weeks). We performed nanoindentation to determine mechanical properties across the hydrated lesions, and micro X-ray computed tomography (MicroXCT) to determine mineral profiles. Ultrastructure in lesions was analyzed by TEM/selected area electron diffraction (SAED). Demineralized dentin discs were analyzed by small angle X-ray scattering (SAXS). RESULTS: Diffusion-dominated demineralization was shown based on the linearity between lesion depths versus the square root of exposure time in either solution, with faster kinetics in acetate buffer. Nanoindentation revealed lactate induced a significantly sharper transition in reduced elastic modulus across the lesions. MicroXCT showed lactate demineralized lesions had swelling and more disorganized matrix structure, whereas acetate lesions had abrupt X-ray absorption near the margin. At the ultrastructural level, TEM showed lactate was more effective in removing minerals from the collagenous matrix, which was confirmed by SAXS analysis. CONCLUSIONS: These findings indicated the different acids yielded lesions with different characteristics that could influence lesion formation resulting in their distinct predominance in different caries activities, and these differences may impact strategies for dentin caries remineralization.

Extracellular matrix mineralization in murine MC3T3-E1 osteoblast cultures: an ultrastructural, compositional and comparative analysis with mouse bone.

Bone cell culture systems are essential tools for the study of the molecular mechanisms regulating extracellular matrix mineralization. MC3T3-E1 osteoblast cell cultures are the most commonly used in vitro model of bone matrix mineralization. Despite the widespread use of this cell line to study biomineralization, there is as yet no systematic characterization of the mineral phase produced in these cultures. Here we provide a comprehensive, multi-technique biophysical characterization of this cell culture mineral and extracellular matrix, and compare it to mouse bone and synthetic apatite mineral standards, to determine the suitability of MC3T3-E1 cultures for biomineralization studies. Elemental compositional analysis by energy-dispersive X-ray spectroscopy (EDS) showed calcium and phosphorus, and trace amounts of sodium and magnesium, in both biological samples. X-ray diffraction (XRD) on resin-embedded intact cultures demonstrated that similar to 1-month-old mouse bone, apatite crystals grew with preferential orientations along the (100), (101) and (111) mineral planes indicative of guided biogenic growth as opposed to dystrophic calcification. XRD of crystals isolated from the cultures revealed that the mineral phase was poorly crystalline hydroxyapatite with 10 to 20nm-sized nanocrystallites. Consistent with the XRD observations, electron diffraction patterns indicated that culture mineral had low crystallinity typical of biological apatites. Fourier-transform infrared spectroscopy (FTIR) confirmed apatitic carbonate and phosphate within the biological samples. With all techniques utilized, cell culture mineral and mouse bone mineral were remarkably similar. Scanning (SEM) and transmission (TEM) electron microscopy showed that the cultures had a dense fibrillar collagen matrix with small, 100nm-sized, collagen fibril-associated mineralization foci which coalesced to form larger mineral aggregates, and where mineralized sites showed the accumulation of the mineral-binding protein osteopontin. Light microscopy, confocal microscopy and three-dimensional reconstructions showed that some cells had dendritic processes and became embedded within the mineral in an osteocyte-like manner. In conclusion, we have documented characteristics of the mineral and matrix phases of MC3T3-E1 osteoblast cultures, and have determined that the structural and compositional properties of the mineral are highly similar to that of mouse bone.

Genetic polymorphisms of CYP2E1, GSTM1, and GSTT1; environmental factors and risk of oral cancer.

Both genetic and environmental factors are involved in the development of cancer; some phase I and II enzymes involved in the metabolism of carcinogens are polymorphic in genotypes. This case-control study focused on the interactions between oral cancer risk factors and genetic polymorphisms of cytochrome P-450 (CYP) 2E1 and glutathione S-transferase (GST) M1 and GSTT1. A total of 41 male oral cancer cases was recruited from National Taiwan University Hospital, and 123 healthy controls frequency-matched on ethnicity, sex, and age were recruited from residents living in Taipei City and Taipei County. History of cigarette smoking, alcohol drinking, and betel quid chewing was obtained through a standardized questionnaire interview, and genotypes of CYP2E1, GSTM1, and GSTT1 were determined by PCR. Cigarette smoking, alcohol drinking, and betel quid chewing were significantly associated with the risk of oral cancer in a dose-response relationship. All betel quid chewers smoked cigarettes in both the case and control groups. In the multiple logistic regression analysis, those who had null genotypes of GSTM1 and/or GSTT1 had an increased oral cancer risk compared with those who had non-null genotypes of both GSTM1 and GSTT1, showing a multivariate-adjusted odds ratio (OR) of 4.6 with a 95% confidence interval (CI) of 0.9-23.7 (P = 0.08). The CYP2E1 c1/c2 and c2/c2 genotypes were associated with a significantly increased oral cancer risk compared with the c1/c1 genotype among those who did not chew betel quid (OR, 4.7; 95% CI, 1.1-20.2), but not among betel quid chewers. Habitual alcohol drinking was associated with a significantly increased oral cancer risk, showing an OR of 3.0 (95% CI, 1.1-8.8). These results implied that there are gene-gene and gene-environment interactions in the development of oral cancer.

Urinary mercury levels before and after amalgam restoration.

Urinary mercury levels and excretion rates were measured to determine the effect of dental amalgam restoration on the mercury body burden. No consistent increase in urinary mercury concentrations was found among subjects who had a single restoration, but a continuously increasing statistically significant (P < 0.05) trend, that was 33% above background levels, was detected between 9 and 12 days after restoration, in the subject with four restorations in a single day. The current findings suggested that even though amalgam restorations can cause an increase in mercury body burden, the elevation above background levels is small and thus the risks associated with the use of this material are considered minimal for the general population.

Minimization of cobalt nuclide emissions in supercritical water oxidation of spent resin.

A rapid and complete destruction of organics in the supercritical water oxidation (SCWO) of the Co-exchanged resin was found experimentally. Due to an extremely low solubility of CoSO4 salt formed and separated effectively in the SCWO process, a minimal release of the nuclide Co would be warranted. In addition, recycling of Co nuclides is also possible by decomposition of the CoSO4 species at elevated temperatures (> 1040 K).

Fate of bromine in pyrolysis of printed circuit board wastes.

Behavior of Br in pyrolysis of the printed circuit board waste with valuable copper and oil recycling has been studied in the present work. Experimentally, pyrolysis of the printed circuit board waste generated approximately 40.6% of oils, 24.9% of noncondensible gases and 34.5% of solid residues that enriched in copper (90-95%). The cuts of the oils produced from pyrolysis of the printed circuit board waste into weighted boiling fraction were primarily light naphtha and heavy gas oil. Approximately 72.3% of total Br in the printed circuit board waste were found in product gas mainly as HBr and bromobenzene. However, by extended X-ray absorption fine structural (EXAFS) spectroscopy, Cu-O and Cu-(O)-Cu species with bond distance of 1.87 and 2.95 A, respectively, were observed in the solid residues. Essentially, no Cu-Br species was found.

Management of thyroid cancers diagnosed histologically after surgery.

Thirty-three patients with thyroid cancer diagnosed histologically after surgery from 1960 to 1987 were reviewed to delineate an acceptable treatment policy. The first group of 17 patients did not undergo a second operation, and five of these patients (29%) experienced local recurrence, metastasis and death during follow-up (minimum of 15 years). A second group of 16 patients underwent a second operation, and all remained healthy during the mean follow-up period of eight years. In 56% of the specimens obtained during the second operation, a histologic examination revealed residual cancerous foci in the remnant thyroid tissue or lymph node. This present study indicates that age, tumor grade, extent and size (AGES score), and the operative strategy used in the initial procedure are important factors affecting the prognosis. We suggest that patients whose tumors lose capsular integrity, show evidence of intraglandular metastases or have an AGES score of 3.1 or more should be considered as candidates for a second operation.

Effect of framing on adolescents' decision making.

92 young adolescents were tested using Tversky and Kahneman's (1981) decision problems for framing effects. A notable number of young adolescents tested were not influenced by the context of the decision problems, thus they selected the same response option for positively and negatively framed problems. Parallel information was not available in Tversky and Kahneman's study for adults because they used a between-subjects design. However, for present adolescents who selected different response options for different framing problems, the response pattern exhibited by them resembled the general pattern exhibited by the adults tested in Tversky and Kahneman's study-negative frames led them to accept risk to avoid certain loss; positive frames prevented them from risking what they were certain to gain. Boys and girls were similar in their susceptibility to framing effects as were honors students in mathematics as compared to nonhonors students. Although the positive vs negative framing only influenced some of the young adolescents tested in this study, because the influence was consistent, researchers and educators interested in adolescents' decisions involving risky choices might use framing principles to design and assess cognitive interventions for high-risk behaviors among young adolescents.

Chromosomal and isozyme studies of Nicotiana tabacum - Glycine max hybrid cell lines.

The chromosomal stability of a number of somatic hybrids derived from soybean (Glycine max (L.) Merr.) and Nicotiana tabacum var. 'Xanthi' were investigated. Several of the hybrid cell lines retained more than half the complement of N. tabacum chromosomes after 7 months of culturing. A number of chromosomal abnormalities were observed. The hybrids were positively identified by employing isozyme analysis of several dehydrogenases and aspartate aminotransferase.